From: Michael Walle <michael@walle.cc>
Date: Fri, 20 Dec 2019 13:16:48 +0000 (+0100)
Subject: drivers: net: fsl_enetc: add write_hwaddr() for LS1028A
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=42c66f057f6f35b4e3463a4ba37c7460cab48964;p=u-boot.git

drivers: net: fsl_enetc: add write_hwaddr() for LS1028A

The LS1028A SoC is special in the handling of the MAC addresses. We need
to write to the IERB version of the PSIPMAR0/1 register. This value will
be sampled into the corresponding port PSIPMAR0/1 register if the PCI
memory access is enabled.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
---

diff --git a/drivers/net/fsl_enetc.c b/drivers/net/fsl_enetc.c
index 7c0ed9f606..2ffab1bb14 100644
--- a/drivers/net/fsl_enetc.c
+++ b/drivers/net/fsl_enetc.c
@@ -330,12 +330,50 @@ static int enetc_remove(struct udevice *dev)
 	return 0;
 }
 
+/*
+ * LS1028A is the only part with IERB at this time and there are plans to
+ * change its structure, keep this LS1028A specific for now.
+ */
+#define LS1028A_IERB_BASE		0x1f0800000ULL
+#define LS1028A_IERB_PSIPMAR0(pf, vf)	(LS1028A_IERB_BASE + 0x8000 \
+					 + (pf) * 0x100 + (vf) * 8)
+#define LS1028A_IERB_PSIPMAR1(pf, vf)	(LS1028A_IERB_PSIPMAR0(pf, vf) + 4)
+
+static int enetc_ls1028a_write_hwaddr(struct udevice *dev)
+{
+	struct pci_child_platdata *ppdata = dev_get_parent_platdata(dev);
+	const int devfn_to_pf[] = {0, 1, 2, -1, -1, -1, 3};
+	struct eth_pdata *plat = dev_get_platdata(dev);
+	int devfn = PCI_FUNC(ppdata->devfn);
+	u8 *addr = plat->enetaddr;
+	u32 lower, upper;
+	int pf;
+
+	if (devfn >= ARRAY_SIZE(devfn_to_pf))
+		return 0;
+
+	pf = devfn_to_pf[devfn];
+	if (pf < 0)
+		return 0;
+
+	lower = *(const u16 *)(addr + 4);
+	upper = *(const u32 *)addr;
+
+	out_le32(LS1028A_IERB_PSIPMAR0(pf, 0), upper);
+	out_le32(LS1028A_IERB_PSIPMAR1(pf, 0), lower);
+
+	return 0;
+}
+
 static int enetc_write_hwaddr(struct udevice *dev)
 {
 	struct eth_pdata *plat = dev_get_platdata(dev);
 	struct enetc_priv *priv = dev_get_priv(dev);
 	u8 *addr = plat->enetaddr;
 
+	if (IS_ENABLED(CONFIG_ARCH_LS1028A))
+		return enetc_ls1028a_write_hwaddr(dev);
+
 	u16 lower = *(const u16 *)(addr + 4);
 	u32 upper = *(const u32 *)addr;