From: Tejas Bhumkar Date: Thu, 21 Mar 2024 08:52:20 +0000 (+0530) Subject: arm64: zynqmp: Disable Tri-state for SDIO X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=427120681a547c6891f5e458abab298ea7fea472;p=u-boot.git arm64: zynqmp: Disable Tri-state for SDIO Since the zynqmp pinctrl driver now includes support for the tri-state registers, ensure that the pins needing output-enable are correctly configured for SOMs. Currently, there is an issue with the detection of the MMC for the SOM kv260, resulting in the following error: ZynqMP> mmc dev 1 Card did not respond to voltage select! : -110 To address this problem, configure the SDIO pins for output-enable to enable MMC detection. Signed-off-by: Tejas Bhumkar Signed-off-by: Michal Simek Link: https://lore.kernel.org/r/20240321085220.2920792-2-tejas.arvind.bhumkar@amd.com --- diff --git a/arch/arm/dts/zynqmp-sck-kv-g-revA.dtso b/arch/arm/dts/zynqmp-sck-kv-g-revA.dtso index 6d0d5c487d..561b546e37 100644 --- a/arch/arm/dts/zynqmp-sck-kv-g-revA.dtso +++ b/arch/arm/dts/zynqmp-sck-kv-g-revA.dtso @@ -342,6 +342,7 @@ slew-rate = ; power-source = ; bias-disable; + output-enable; }; conf-cd { diff --git a/arch/arm/dts/zynqmp-sck-kv-g-revB.dtso b/arch/arm/dts/zynqmp-sck-kv-g-revB.dtso index a4b4465d20..13876fb47d 100644 --- a/arch/arm/dts/zynqmp-sck-kv-g-revB.dtso +++ b/arch/arm/dts/zynqmp-sck-kv-g-revB.dtso @@ -329,6 +329,7 @@ slew-rate = ; power-source = ; bias-disable; + output-enable; }; conf-cd {