From: Ye Li Date: Sun, 21 Feb 2021 16:26:21 +0000 (-0800) Subject: phy: phy-imx8mq-usb: Add USB PHY driver for i.MX8MQ X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=4266dc1dffc173099966d7e2e0cdf959c93800b8;p=u-boot.git phy: phy-imx8mq-usb: Add USB PHY driver for i.MX8MQ Add the USB PHY driver for i.MX8MQ to work with DWC3 USB controller. Signed-off-by: Ye Li Reviewed-by: Patrick Wildt Tested-by: Patrick Wildt --- diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 008186a10d..09cb744276 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -268,5 +268,12 @@ config PHY_MTK_TPHY multi-ports is first version, otherwise is second veriosn, so you can easily distinguish them by banks layout. +config PHY_IMX8MQ_USB + bool "NXP i.MX8MQ USB PHY Driver" + depends on PHY + depends on IMX8MQ + help + Support the USB3.0 PHY in NXP i.MX8MQ SoC + source "drivers/phy/rockchip/Kconfig" endmenu diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index 3c4a673a83..c6ad3b1b26 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -31,3 +31,4 @@ obj-$(CONFIG_MT7620_USB_PHY) += mt7620-usb-phy.o obj-$(CONFIG_MT76X8_USB_PHY) += mt76x8-usb-phy.o obj-$(CONFIG_PHY_DA8XX_USB) += phy-da8xx-usb.o obj-$(CONFIG_PHY_MTK_TPHY) += phy-mtk-tphy.o +obj-$(CONFIG_PHY_IMX8MQ_USB) += phy-imx8mq-usb.o diff --git a/drivers/phy/phy-imx8mq-usb.c b/drivers/phy/phy-imx8mq-usb.c new file mode 100644 index 0000000000..afbc7ad8dd --- /dev/null +++ b/drivers/phy/phy-imx8mq-usb.c @@ -0,0 +1,197 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2021 NXP + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define PHY_CTRL0 0x0 +#define PHY_CTRL0_REF_SSP_EN BIT(2) +#define PHY_CTRL0_FSEL_MASK GENMASK(10, 5) +#define PHY_CTRL0_FSEL_24M 0x2a +#define PHY_CTRL0_FSEL_100M 0x27 +#define PHY_CTRL0_SSC_RANGE_MASK GENMASK(23, 21) +#define PHY_CTRL0_SSC_RANGE_4003PPM (0x2 << 21) + +#define PHY_CTRL1 0x4 +#define PHY_CTRL1_RESET BIT(0) +#define PHY_CTRL1_COMMONONN BIT(1) +#define PHY_CTRL1_ATERESET BIT(3) +#define PHY_CTRL1_DCDENB BIT(17) +#define PHY_CTRL1_CHRGSEL BIT(18) +#define PHY_CTRL1_VDATSRCENB0 BIT(19) +#define PHY_CTRL1_VDATDETENB0 BIT(20) + +#define PHY_CTRL2 0x8 +#define PHY_CTRL2_TXENABLEN0 BIT(8) +#define PHY_CTRL2_OTG_DISABLE BIT(9) + +#define PHY_CTRL3 0xc +#define PHY_CTRL3_COMPDISTUNE_MASK GENMASK(2, 0) +#define PHY_CTRL3_TXPREEMP_TUNE_MASK GENMASK(16, 15) +#define PHY_CTRL3_TXPREEMP_TUNE_SHIFT 15 +#define PHY_CTRL3_TXRISE_TUNE_MASK GENMASK(21, 20) +#define PHY_CTRL3_TXRISE_TUNE_SHIFT 20 +/* 1111: +24% ... 0000: -6% step: 2% */ +#define PHY_CTRL3_TXVREF_TUNE_MASK GENMASK(25, 22) +#define PHY_CTRL3_TXVREF_TUNE_SHIFT 22 +#define PHY_CTRL3_TX_VBOOST_LEVEL_MASK GENMASK(31, 29) +#define PHY_CTRL3_TX_VBOOST_LEVEL_SHIFT 29 + +#define PHY_CTRL4 0x10 +#define PHY_CTRL4_PCS_TX_DEEMPH_3P5DB_MASK GENMASK(20, 15) +#define PHY_CTRL4_PCS_TX_DEEMPH_3P5DB_SHIFT 15 + +#define PHY_CTRL5 0x14 +#define PHY_CTRL5_DMPWD_OVERRIDE_SEL BIT(23) +#define PHY_CTRL5_DMPWD_OVERRIDE BIT(22) +#define PHY_CTRL5_DPPWD_OVERRIDE_SEL BIT(21) +#define PHY_CTRL5_DPPWD_OVERRIDE BIT(20) +#define PHY_CTRL5_PCS_TX_SWING_FULL_MASK GENMASK(6, 0) + +#define PHY_CTRL6 0x18 +#define PHY_CTRL6_RXTERM_OVERRIDE_SEL BIT(29) +#define PHY_CTRL6_ALT_CLK_EN BIT(1) +#define PHY_CTRL6_ALT_CLK_SEL BIT(0) + +#define PHY_STS0 0x40 +#define PHY_STS0_OTGSESSVLD BIT(7) +#define PHY_STS0_CHGDET BIT(4) +#define PHY_STS0_FSVPLUS BIT(3) +#define PHY_STS0_FSVMINUS BIT(2) + +struct imx8mq_usb_phy { +#if CONFIG_IS_ENABLED(CLK) + struct clk phy_clk; +#endif + void __iomem *base; +}; + +static const struct udevice_id imx8mq_usb_phy_of_match[] = { + { + .compatible = "fsl,imx8mq-usb-phy", + }, + {}, +}; + +static int imx8mq_usb_phy_init(struct phy *usb_phy) +{ + struct udevice *dev = usb_phy->dev; + struct imx8mq_usb_phy *imx_phy = dev_get_priv(dev); + u32 value; + + value = readl(imx_phy->base + PHY_CTRL1); + value &= ~(PHY_CTRL1_VDATSRCENB0 | PHY_CTRL1_VDATDETENB0 | + PHY_CTRL1_COMMONONN); + value |= PHY_CTRL1_RESET | PHY_CTRL1_ATERESET; + writel(value, imx_phy->base + PHY_CTRL1); + + value = readl(imx_phy->base + PHY_CTRL0); + value |= PHY_CTRL0_REF_SSP_EN; + value &= ~PHY_CTRL0_SSC_RANGE_MASK; + value |= PHY_CTRL0_SSC_RANGE_4003PPM; + writel(value, imx_phy->base + PHY_CTRL0); + + value = readl(imx_phy->base + PHY_CTRL2); + value |= PHY_CTRL2_TXENABLEN0; + writel(value, imx_phy->base + PHY_CTRL2); + + value = readl(imx_phy->base + PHY_CTRL1); + value &= ~(PHY_CTRL1_RESET | PHY_CTRL1_ATERESET); + writel(value, imx_phy->base + PHY_CTRL1); + + return 0; +} + +static int imx8mq_usb_phy_power_on(struct phy *usb_phy) +{ + struct udevice *dev = usb_phy->dev; + struct imx8mq_usb_phy *imx_phy = dev_get_priv(dev); + u32 value; + +#if CONFIG_IS_ENABLED(CLK) + int ret; + ret = clk_enable(&imx_phy->phy_clk); + if (ret) { + printf("Failed to enable usb phy clock\n"); + return ret; + } +#endif + + /* Disable rx term override */ + value = readl(imx_phy->base + PHY_CTRL6); + value &= ~PHY_CTRL6_RXTERM_OVERRIDE_SEL; + writel(value, imx_phy->base + PHY_CTRL6); + + return 0; +} + +static int imx8mq_usb_phy_power_off(struct phy *usb_phy) +{ + struct udevice *dev = usb_phy->dev; + struct imx8mq_usb_phy *imx_phy = dev_get_priv(dev); + u32 value; + + /* Override rx term to be 0 */ + value = readl(imx_phy->base + PHY_CTRL6); + value |= PHY_CTRL6_RXTERM_OVERRIDE_SEL; + writel(value, imx_phy->base + PHY_CTRL6); + +#if CONFIG_IS_ENABLED(CLK) + clk_disable(&imx_phy->phy_clk); +#endif + + return 0; +} + +static int imx8mq_usb_phy_exit(struct phy *usb_phy) +{ + return imx8mq_usb_phy_power_off(usb_phy); +} + +struct phy_ops imx8mq_usb_phy_ops = { + .init = imx8mq_usb_phy_init, + .power_on = imx8mq_usb_phy_power_on, + .power_off = imx8mq_usb_phy_power_off, + .exit = imx8mq_usb_phy_exit, +}; + +int imx8mq_usb_phy_probe(struct udevice *dev) +{ + struct imx8mq_usb_phy *priv = dev_get_priv(dev); + + priv->base = dev_read_addr_ptr(dev); + + if (!priv->base) + return -EINVAL; + +#if CONFIG_IS_ENABLED(CLK) + int ret; + + /* Assigned clock already set clock */ + ret = clk_get_by_name(dev, "phy", &priv->phy_clk); + if (ret) { + printf("Failed to get usb phy clock\n"); + return ret; + } +#endif + + return 0; +} + +U_BOOT_DRIVER(nxp_imx8mq_usb_phy) = { + .name = "nxp_imx8mq_usb_phy", + .id = UCLASS_PHY, + .of_match = imx8mq_usb_phy_of_match, + .probe = imx8mq_usb_phy_probe, + .ops = &imx8mq_usb_phy_ops, + .priv_auto = sizeof(struct imx8mq_usb_phy), +};