From: Tom Rini Date: Thu, 11 May 2023 18:07:24 +0000 (-0400) Subject: arm: Remove ti816x_evm board and ti816x SoC support X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=41e289bb1f6032694900afad017320d26f411066;p=u-boot.git arm: Remove ti816x_evm board and ti816x SoC support This platform is currently unmaintained and untested, so remove it. Further, as it is the only TI816X SoC example, remove related files as well. Signed-off-by: Tom Rini --- diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 935b2f1517..35f50f4b15 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -449,7 +449,6 @@ dtb-$(CONFIG_AM43XX) += am437x-gp-evm.dtb am437x-sk-evm.dtb \ am4372-generic.dtb \ am437x-cm-t43.dtb dtb-$(CONFIG_TARGET_AM3517_EVM) += am3517-evm.dtb -dtb-$(CONFIG_TI816X) += dm8168-evm.dtb dtb-$(CONFIG_TARGET_THUNDERX_88XX) += thunderx-88xx.dtb dtb-$(CONFIG_ARCH_SOCFPGA) += \ diff --git a/arch/arm/dts/dm8168-evm-u-boot.dtsi b/arch/arm/dts/dm8168-evm-u-boot.dtsi deleted file mode 100644 index f939df27e4..0000000000 --- a/arch/arm/dts/dm8168-evm-u-boot.dtsi +++ /dev/null @@ -1,12 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * dm8168-evm U-Boot Additions - * - * Copyright (C) 2020 Dario Binacchi - */ - -/ { - ocp { - bootph-all; - }; -}; diff --git a/arch/arm/dts/dm8168-evm.dts b/arch/arm/dts/dm8168-evm.dts deleted file mode 100644 index 70255ab259..0000000000 --- a/arch/arm/dts/dm8168-evm.dts +++ /dev/null @@ -1,171 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/dts-v1/; - -#include "dm816x.dtsi" -#include - -/ { - model = "DM8168 EVM"; - compatible = "ti,dm8168-evm", "ti,dm8168"; - - memory@80000000 { - device_type = "memory"; - reg = <0x80000000 0x40000000 /* 1 GB */ - 0xc0000000 0x40000000>; /* 1 GB */ - }; - - /* FDC6331L controlled by SD_POW pin */ - vmmcsd_fixed: fixedregulator0 { - compatible = "regulator-fixed"; - regulator-name = "vmmcsd_fixed"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; -}; - -&dm816x_pinmux { - mcspi1_pins: pinmux_mcspi1_pins { - pinctrl-single,pins = < - DM816X_IOPAD(0x0a94, MUX_MODE0) /* SPI_SCLK */ - DM816X_IOPAD(0x0a98, MUX_MODE0) /* SPI_SCS0 */ - DM816X_IOPAD(0x0aa8, MUX_MODE0) /* SPI_D0 */ - DM816X_IOPAD(0x0aac, MUX_MODE0) /* SPI_D1 */ - >; - }; - - mmc_pins: pinmux_mmc_pins { - pinctrl-single,pins = < - DM816X_IOPAD(0x0a70, MUX_MODE0) /* SD_POW */ - DM816X_IOPAD(0x0a74, MUX_MODE0) /* SD_CLK */ - DM816X_IOPAD(0x0a78, MUX_MODE0) /* SD_CMD */ - DM816X_IOPAD(0x0a7C, MUX_MODE0) /* SD_DAT0 */ - DM816X_IOPAD(0x0a80, MUX_MODE0) /* SD_DAT1 */ - DM816X_IOPAD(0x0a84, MUX_MODE0) /* SD_DAT2 */ - DM816X_IOPAD(0x0a88, MUX_MODE0) /* SD_DAT2 */ - DM816X_IOPAD(0x0a8c, MUX_MODE2) /* GP1[7] */ - DM816X_IOPAD(0x0a90, MUX_MODE2) /* GP1[8] */ - >; - }; - - usb0_pins: pinmux_usb0_pins { - pinctrl-single,pins = < - DM816X_IOPAD(0x0d04, MUX_MODE0) /* USB0_DRVVBUS */ - >; - }; - - usb1_pins: pinmux_usb1_pins { - pinctrl-single,pins = < - DM816X_IOPAD(0x0d08, MUX_MODE0) /* USB1_DRVVBUS */ - >; - }; -}; - -&i2c1 { - extgpio0: pcf8575@20 { - compatible = "nxp,pcf8575"; - reg = <0x20>; - gpio-controller; - #gpio-cells = <2>; - }; -}; - -&i2c2 { - extgpio1: pcf8575@20 { - compatible = "nxp,pcf8575"; - reg = <0x20>; - gpio-controller; - #gpio-cells = <2>; - }; -}; - -&gpmc { - ranges = <0 0 0x04000000 0x01000000>; /* CS0: 16MB for NAND */ - - nand@0,0 { - compatible = "ti,omap2-nand"; - linux,mtd-name= "micron,mt29f2g16aadwp"; - reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ - interrupt-parent = <&gpmc>; - interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ - <1 IRQ_TYPE_NONE>; /* termcount */ - #address-cells = <1>; - #size-cells = <1>; - ti,nand-ecc-opt = "bch8"; - nand-bus-width = <16>; - gpmc,device-width = <2>; - gpmc,sync-clk-ps = <0>; - gpmc,cs-on-ns = <0>; - gpmc,cs-rd-off-ns = <44>; - gpmc,cs-wr-off-ns = <44>; - gpmc,adv-on-ns = <6>; - gpmc,adv-rd-off-ns = <34>; - gpmc,adv-wr-off-ns = <44>; - gpmc,we-on-ns = <0>; - gpmc,we-off-ns = <40>; - gpmc,oe-on-ns = <0>; - gpmc,oe-off-ns = <54>; - gpmc,access-ns = <64>; - gpmc,rd-cycle-ns = <82>; - gpmc,wr-cycle-ns = <82>; - gpmc,bus-turnaround-ns = <0>; - gpmc,cycle2cycle-delay-ns = <0>; - gpmc,clk-activation-ns = <0>; - gpmc,wr-access-ns = <40>; - gpmc,wr-data-mux-bus-ns = <0>; - partition@0 { - label = "X-Loader"; - reg = <0 0x80000>; - }; - partition@80000 { - label = "U-Boot"; - reg = <0x80000 0x1c0000>; - }; - partition@1c0000 { - label = "Environment"; - reg = <0x240000 0x40000>; - }; - partition@280000 { - label = "Kernel"; - reg = <0x280000 0x500000>; - }; - partition@780000 { - label = "Filesystem"; - reg = <0x780000 0xf880000>; - }; - }; -}; - -&mcspi1 { - pinctrl-names = "default"; - pinctrl-0 = <&mcspi1_pins>; - - flash@0 { - compatible = "w25x32"; - spi-max-frequency = <48000000>; - reg = <0>; - #address-cells = <1>; - #size-cells = <1>; - }; -}; - -&mmc1 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc_pins>; - vmmc-supply = <&vmmcsd_fixed>; - bus-width = <4>; - cd-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio2 8 GPIO_ACTIVE_LOW>; -}; - -/* At least dm8168-evm rev c won't support multipoint, later may */ -&usb0 { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_pins>; - mentor,multipoint = <0>; -}; - -&usb1 { - pinctrl-names = "default"; - pinctrl-0 = <&usb1_pins>; - mentor,multipoint = <0>; -}; diff --git a/arch/arm/dts/dm816x-clocks.dtsi b/arch/arm/dts/dm816x-clocks.dtsi deleted file mode 100644 index f7a839dabf..0000000000 --- a/arch/arm/dts/dm816x-clocks.dtsi +++ /dev/null @@ -1,246 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only - -&scrm { - main_fapll: main_fapll { - #clock-cells = <1>; - compatible = "ti,dm816-fapll-clock"; - reg = <0x400 0x40>; - clocks = <&sys_clkin_ck &sys_clkin_ck>; - clock-indices = <1>, <2>, <3>, <4>, <5>, - <6>, <7>; - clock-output-names = "main_pll_clk1", - "main_pll_clk2", - "main_pll_clk3", - "main_pll_clk4", - "main_pll_clk5", - "main_pll_clk6", - "main_pll_clk7"; - }; - - ddr_fapll: ddr_fapll { - #clock-cells = <1>; - compatible = "ti,dm816-fapll-clock"; - reg = <0x440 0x30>; - clocks = <&sys_clkin_ck &sys_clkin_ck>; - clock-indices = <1>, <2>, <3>, <4>; - clock-output-names = "ddr_pll_clk1", - "ddr_pll_clk2", - "ddr_pll_clk3", - "ddr_pll_clk4"; - }; - - video_fapll: video_fapll { - #clock-cells = <1>; - compatible = "ti,dm816-fapll-clock"; - reg = <0x470 0x30>; - clocks = <&sys_clkin_ck &sys_clkin_ck>; - clock-indices = <1>, <2>, <3>; - clock-output-names = "video_pll_clk1", - "video_pll_clk2", - "video_pll_clk3"; - }; - - audio_fapll: audio_fapll { - #clock-cells = <1>; - compatible = "ti,dm816-fapll-clock"; - reg = <0x4a0 0x30>; - clocks = <&main_fapll 7>, < &sys_clkin_ck>; - clock-indices = <1>, <2>, <3>, <4>, <5>; - clock-output-names = "audio_pll_clk1", - "audio_pll_clk2", - "audio_pll_clk3", - "audio_pll_clk4", - "audio_pll_clk5"; - }; -}; - -&scrm_clocks { - secure_32k_ck: secure_32k_ck { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <32768>; - }; - - sys_32k_ck: sys_32k_ck { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <32768>; - }; - - tclkin_ck: tclkin_ck { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <32768>; - }; - - sys_clkin_ck: sys_clkin_ck { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <27000000>; - }; -}; - -/* 0x48180000 */ -&prcm_clocks { - clkout_pre_ck: clkout_pre_ck@100 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&main_fapll 5 &ddr_fapll 1 &video_fapll 1 - &audio_fapll 1>; - reg = <0x100>; - }; - - clkout_div_ck: clkout_div_ck@100 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&clkout_pre_ck>; - ti,bit-shift = <3>; - ti,max-div = <8>; - reg = <0x100>; - }; - - clkout_ck: clkout_ck@100 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&clkout_div_ck>; - ti,bit-shift = <7>; - reg = <0x100>; - }; - - /* CM_DPLL clocks p1795 */ - sysclk1_ck: sysclk1_ck@300 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&main_fapll 1>; - ti,max-div = <7>; - reg = <0x0300>; - }; - - sysclk2_ck: sysclk2_ck@304 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&main_fapll 2>; - ti,max-div = <7>; - reg = <0x0304>; - }; - - sysclk3_ck: sysclk3_ck@308 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&main_fapll 3>; - ti,max-div = <7>; - reg = <0x0308>; - }; - - sysclk4_ck: sysclk4_ck@30c { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&main_fapll 4>; - ti,max-div = <1>; - reg = <0x030c>; - }; - - sysclk5_ck: sysclk5_ck@310 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&sysclk4_ck>; - ti,max-div = <1>; - reg = <0x0310>; - }; - - sysclk6_ck: sysclk6_ck@314 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&main_fapll 4>; - ti,dividers = <2>, <4>; - reg = <0x0314>; - }; - - sysclk10_ck: sysclk10_ck@324 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&ddr_fapll 2>; - ti,max-div = <7>; - reg = <0x0324>; - }; - - sysclk24_ck: sysclk24_ck@3b4 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&main_fapll 5>; - ti,max-div = <7>; - reg = <0x03b4>; - }; - - mpu_ck: mpu_ck@15dc { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&sysclk2_ck>; - ti,bit-shift = <1>; - reg = <0x15dc>; - }; - - audio_pll_a_ck: audio_pll_a_ck@35c { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&audio_fapll 1>; - ti,max-div = <7>; - reg = <0x035c>; - }; - - sysclk18_ck: sysclk18_ck@378 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&sys_32k_ck>, <&audio_pll_a_ck>; - reg = <0x0378>; - }; - - timer1_fck: timer1_fck@390 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>; - reg = <0x0390>; - }; - - timer2_fck: timer2_fck@394 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>; - reg = <0x0394>; - }; - - timer3_fck: timer3_fck@398 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>; - reg = <0x0398>; - }; - - timer4_fck: timer4_fck@39c { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>; - reg = <0x039c>; - }; - - timer5_fck: timer5_fck@3a0 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>; - reg = <0x03a0>; - }; - - timer6_fck: timer6_fck@3a4 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>; - reg = <0x03a4>; - }; - - timer7_fck: timer7_fck@3a8 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>; - reg = <0x03a8>; - }; -}; diff --git a/arch/arm/dts/dm816x.dtsi b/arch/arm/dts/dm816x.dtsi deleted file mode 100644 index c4a8653b7f..0000000000 --- a/arch/arm/dts/dm816x.dtsi +++ /dev/null @@ -1,517 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only - -#include -#include - -/ { - compatible = "ti,dm816"; - interrupt-parent = <&intc>; - #address-cells = <1>; - #size-cells = <1>; - chosen { }; - - aliases { - i2c0 = &i2c1; - i2c1 = &i2c2; - serial0 = &uart1; - serial1 = &uart2; - serial2 = &uart3; - ethernet0 = ð0; - ethernet1 = ð1; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - cpu@0 { - compatible = "arm,cortex-a8"; - device_type = "cpu"; - reg = <0>; - }; - }; - - pmu { - compatible = "arm,cortex-a8-pmu"; - interrupts = <3>; - }; - - /* - * The soc node represents the soc top level view. It is used for IPs - * that are not memory mapped in the MPU view or for the MPU itself. - */ - soc { - compatible = "ti,omap-infra"; - mpu { - compatible = "ti,omap3-mpu"; - ti,hwmods = "mpu"; - }; - }; - - /* - * XXX: Use a flat representation of the dm816x interconnect. - * The real dm816x interconnect network is quite complex. Since - * it will not bring real advantage to represent that in DT - * for the moment, just use a fake OCP bus entry to represent - * the whole bus hierarchy. - */ - ocp { - compatible = "simple-bus"; - reg = <0x44000000 0x10000>; - interrupts = <9 10>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - prcm: prcm@48180000 { - compatible = "ti,dm816-prcm", "simple-bus"; - reg = <0x48180000 0x4000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x48180000 0x4000>; - - prcm_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; - - prcm_clockdomains: clockdomains { - }; - }; - - scrm: scrm@48140000 { - compatible = "ti,dm816-scrm", "simple-bus"; - reg = <0x48140000 0x21000>; - #address-cells = <1>; - #size-cells = <1>; - #pinctrl-cells = <1>; - ranges = <0 0x48140000 0x21000>; - - dm816x_pinmux: pinmux@800 { - compatible = "pinctrl-single"; - reg = <0x800 0x50a>; - #address-cells = <1>; - #size-cells = <0>; - #pinctrl-cells = <1>; - pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0xf>; - }; - - /* Device Configuration Registers */ - scm_conf: syscon@600 { - compatible = "syscon", "simple-bus"; - reg = <0x600 0x110>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x600 0x110>; - - usb_phy0: usb-phy@20 { - compatible = "ti,dm8168-usb-phy"; - reg = <0x20 0x8>; - reg-names = "phy"; - clocks = <&main_fapll 6>; - clock-names = "refclk"; - #phy-cells = <0>; - syscon = <&scm_conf>; - }; - - usb_phy1: usb-phy@28 { - compatible = "ti,dm8168-usb-phy"; - reg = <0x28 0x8>; - reg-names = "phy"; - clocks = <&main_fapll 6>; - clock-names = "refclk"; - #phy-cells = <0>; - syscon = <&scm_conf>; - }; - }; - - scrm_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; - - scrm_clockdomains: clockdomains { - }; - }; - - edma: edma@49000000 { - compatible = "ti,edma3"; - ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2", "tptc3"; - reg = <0x49000000 0x10000>, - <0x44e10f90 0x40>; - interrupts = <12 13 14>; - #dma-cells = <1>; - }; - - elm: elm@48080000 { - compatible = "ti,816-elm"; - ti,hwmods = "elm"; - reg = <0x48080000 0x2000>; - interrupts = <4>; - }; - - gpio1: gpio@48032000 { - compatible = "ti,omap4-gpio"; - ti,hwmods = "gpio1"; - ti,gpio-always-on; - reg = <0x48032000 0x1000>; - interrupts = <96>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio2: gpio@4804c000 { - compatible = "ti,omap4-gpio"; - ti,hwmods = "gpio2"; - ti,gpio-always-on; - reg = <0x4804c000 0x1000>; - interrupts = <98>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpmc: gpmc@50000000 { - compatible = "ti,am3352-gpmc"; - ti,hwmods = "gpmc"; - reg = <0x50000000 0x2000>; - #address-cells = <2>; - #size-cells = <1>; - interrupts = <100>; - dmas = <&edma 52>; - dma-names = "rxtx"; - gpmc,num-cs = <6>; - gpmc,num-waitpins = <2>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-controller; - #gpio-cells = <2>; - }; - - i2c1: i2c@48028000 { - compatible = "ti,omap4-i2c"; - ti,hwmods = "i2c1"; - reg = <0x48028000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <70>; - dmas = <&edma 58 &edma 59>; - dma-names = "tx", "rx"; - }; - - i2c2: i2c@4802a000 { - compatible = "ti,omap4-i2c"; - ti,hwmods = "i2c2"; - reg = <0x4802a000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <71>; - dmas = <&edma 60 &edma 61>; - dma-names = "tx", "rx"; - }; - - intc: interrupt-controller@48200000 { - compatible = "ti,dm816-intc"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0x48200000 0x1000>; - }; - - rtc: rtc@480c0000 { - compatible = "ti,am3352-rtc", "ti,da830-rtc"; - reg = <0x480c0000 0x1000>; - interrupts = <75 76>; - ti,hwmods = "rtc"; - }; - - mailbox: mailbox@480c8000 { - compatible = "ti,omap4-mailbox"; - reg = <0x480c8000 0x2000>; - interrupts = <77>; - ti,hwmods = "mailbox"; - #mbox-cells = <1>; - ti,mbox-num-users = <4>; - ti,mbox-num-fifos = <12>; - mbox_dsp: mbox-dsp { - ti,mbox-tx = <3 0 0>; - ti,mbox-rx = <0 0 0>; - }; - }; - - spinbox: spinbox@480ca000 { - compatible = "ti,omap4-hwspinlock"; - reg = <0x480ca000 0x2000>; - ti,hwmods = "spinbox"; - #hwlock-cells = <1>; - }; - - mdio: mdio@4a100800 { - compatible = "ti,davinci_mdio"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x4a100800 0x100>; - ti,hwmods = "davinci_mdio"; - bus_freq = <1000000>; - phy0: ethernet-phy@0 { - reg = <1>; - }; - phy1: ethernet-phy@1 { - reg = <2>; - }; - }; - - eth0: ethernet@4a100000 { - compatible = "ti,dm816-emac"; - ti,hwmods = "emac0"; - reg = <0x4a100000 0x800 - 0x4a100900 0x3700>; - clocks = <&sysclk24_ck>; - syscon = <&scm_conf>; - ti,davinci-ctrl-reg-offset = <0>; - ti,davinci-ctrl-mod-reg-offset = <0x900>; - ti,davinci-ctrl-ram-offset = <0x2000>; - ti,davinci-ctrl-ram-size = <0x2000>; - interrupts = <40 41 42 43>; - phy-handle = <&phy0>; - }; - - eth1: ethernet@4a120000 { - compatible = "ti,dm816-emac"; - ti,hwmods = "emac1"; - reg = <0x4a120000 0x4000>; - clocks = <&sysclk24_ck>; - syscon = <&scm_conf>; - ti,davinci-ctrl-reg-offset = <0>; - ti,davinci-ctrl-mod-reg-offset = <0x900>; - ti,davinci-ctrl-ram-offset = <0x2000>; - ti,davinci-ctrl-ram-size = <0x2000>; - interrupts = <44 45 46 47>; - phy-handle = <&phy1>; - }; - - mcspi1: spi@48030000 { - compatible = "ti,omap4-mcspi"; - reg = <0x48030000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <65>; - ti,spi-num-cs = <4>; - ti,hwmods = "mcspi1"; - dmas = <&edma 16 &edma 17 - &edma 18 &edma 19 - &edma 20 &edma 21 - &edma 22 &edma 23>; - dma-names = "tx0", "rx0", "tx1", "rx1", - "tx2", "rx2", "tx3", "rx3"; - }; - - mmc1: mmc@48060000 { - compatible = "ti,omap4-hsmmc"; - reg = <0x48060000 0x11000>; - ti,hwmods = "mmc1"; - interrupts = <64>; - dmas = <&edma 24 &edma 25>; - dma-names = "tx", "rx"; - }; - - timer1: timer@4802e000 { - compatible = "ti,dm816-timer"; - reg = <0x4802e000 0x2000>; - interrupts = <67>; - ti,hwmods = "timer1"; - ti,timer-alwon; - }; - - timer2: timer@48040000 { - compatible = "ti,dm816-timer"; - reg = <0x48040000 0x2000>; - interrupts = <68>; - ti,hwmods = "timer2"; - }; - - timer3: timer@48042000 { - compatible = "ti,dm816-timer"; - reg = <0x48042000 0x2000>; - interrupts = <69>; - ti,hwmods = "timer3"; - }; - - timer4: timer@48044000 { - compatible = "ti,dm816-timer"; - reg = <0x48044000 0x2000>; - interrupts = <92>; - ti,hwmods = "timer4"; - ti,timer-pwm; - }; - - timer5: timer@48046000 { - compatible = "ti,dm816-timer"; - reg = <0x48046000 0x2000>; - interrupts = <93>; - ti,hwmods = "timer5"; - ti,timer-pwm; - }; - - timer6: timer@48048000 { - compatible = "ti,dm816-timer"; - reg = <0x48048000 0x2000>; - interrupts = <94>; - ti,hwmods = "timer6"; - ti,timer-pwm; - }; - - timer7: timer@4804a000 { - compatible = "ti,dm816-timer"; - reg = <0x4804a000 0x2000>; - interrupts = <95>; - ti,hwmods = "timer7"; - ti,timer-pwm; - }; - - uart1: serial@48020000 { - compatible = "ti,am3352-uart", "ti,omap3-uart"; - ti,hwmods = "uart1"; - reg = <0x48020000 0x2000>; - clock-frequency = <48000000>; - interrupts = <72>; - dmas = <&edma 26 &edma 27>; - dma-names = "tx", "rx"; - }; - - uart2: serial@48022000 { - compatible = "ti,am3352-uart", "ti,omap3-uart"; - ti,hwmods = "uart2"; - reg = <0x48022000 0x2000>; - clock-frequency = <48000000>; - interrupts = <73>; - dmas = <&edma 28 &edma 29>; - dma-names = "tx", "rx"; - }; - - uart3: serial@48024000 { - compatible = "ti,am3352-uart", "ti,omap3-uart"; - ti,hwmods = "uart3"; - reg = <0x48024000 0x2000>; - clock-frequency = <48000000>; - interrupts = <74>; - dmas = <&edma 30 &edma 31>; - dma-names = "tx", "rx"; - }; - - /* NOTE: USB needs a transceiver driver for phys to work */ - usb: usb_otg_hs@47401000 { - compatible = "ti,am33xx-usb"; - reg = <0x47401000 0x400000>; - ranges; - #address-cells = <1>; - #size-cells = <1>; - ti,hwmods = "usb_otg_hs"; - - usb0: usb@47401000 { - compatible = "ti,musb-dm816"; - reg = <0x47401400 0x400 - 0x47401000 0x200>; - reg-names = "mc", "control"; - interrupts = <18>; - interrupt-names = "mc"; - dr_mode = "host"; - interface-type = <0>; - phys = <&usb_phy0>; - phy-names = "usb2-phy"; - mentor,multipoint = <1>; - mentor,num-eps = <16>; - mentor,ram-bits = <12>; - mentor,power = <500>; - - dmas = <&cppi41dma 0 0 &cppi41dma 1 0 - &cppi41dma 2 0 &cppi41dma 3 0 - &cppi41dma 4 0 &cppi41dma 5 0 - &cppi41dma 6 0 &cppi41dma 7 0 - &cppi41dma 8 0 &cppi41dma 9 0 - &cppi41dma 10 0 &cppi41dma 11 0 - &cppi41dma 12 0 &cppi41dma 13 0 - &cppi41dma 14 0 &cppi41dma 0 1 - &cppi41dma 1 1 &cppi41dma 2 1 - &cppi41dma 3 1 &cppi41dma 4 1 - &cppi41dma 5 1 &cppi41dma 6 1 - &cppi41dma 7 1 &cppi41dma 8 1 - &cppi41dma 9 1 &cppi41dma 10 1 - &cppi41dma 11 1 &cppi41dma 12 1 - &cppi41dma 13 1 &cppi41dma 14 1>; - dma-names = - "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7", - "rx8", "rx9", "rx10", "rx11", "rx12", "rx13", - "rx14", "rx15", - "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7", - "tx8", "tx9", "tx10", "tx11", "tx12", "tx13", - "tx14", "tx15"; - }; - - usb1: usb@47401800 { - compatible = "ti,musb-dm816"; - reg = <0x47401c00 0x400 - 0x47401800 0x200>; - reg-names = "mc", "control"; - interrupts = <19>; - interrupt-names = "mc"; - dr_mode = "host"; - interface-type = <0>; - phys = <&usb_phy1>; - phy-names = "usb2-phy"; - mentor,multipoint = <1>; - mentor,num-eps = <16>; - mentor,ram-bits = <12>; - mentor,power = <500>; - - dmas = <&cppi41dma 15 0 &cppi41dma 16 0 - &cppi41dma 17 0 &cppi41dma 18 0 - &cppi41dma 19 0 &cppi41dma 20 0 - &cppi41dma 21 0 &cppi41dma 22 0 - &cppi41dma 23 0 &cppi41dma 24 0 - &cppi41dma 25 0 &cppi41dma 26 0 - &cppi41dma 27 0 &cppi41dma 28 0 - &cppi41dma 29 0 &cppi41dma 15 1 - &cppi41dma 16 1 &cppi41dma 17 1 - &cppi41dma 18 1 &cppi41dma 19 1 - &cppi41dma 20 1 &cppi41dma 21 1 - &cppi41dma 22 1 &cppi41dma 23 1 - &cppi41dma 24 1 &cppi41dma 25 1 - &cppi41dma 26 1 &cppi41dma 27 1 - &cppi41dma 28 1 &cppi41dma 29 1>; - dma-names = - "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7", - "rx8", "rx9", "rx10", "rx11", "rx12", "rx13", - "rx14", "rx15", - "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7", - "tx8", "tx9", "tx10", "tx11", "tx12", "tx13", - "tx14", "tx15"; - }; - - cppi41dma: dma-controller@47402000 { - compatible = "ti,am3359-cppi41"; - reg = <0x47400000 0x1000 - 0x47402000 0x1000 - 0x47403000 0x1000 - 0x47404000 0x4000>; - reg-names = "glue", "controller", "scheduler", "queuemgr"; - interrupts = <17>; - interrupt-names = "glue"; - #dma-cells = <2>; - #dma-channels = <30>; - #dma-requests = <256>; - }; - }; - - wd_timer2: wd_timer@480c2000 { - compatible = "ti,omap3-wdt"; - ti,hwmods = "wd_timer"; - reg = <0x480c2000 0x1000>; - interrupts = <0>; - }; - }; -}; - -#include "dm816x-clocks.dtsi" diff --git a/arch/arm/include/asm/arch-am33xx/clock.h b/arch/arm/include/asm/arch-am33xx/clock.h index ad25b3e8aa..67400c2c63 100644 --- a/arch/arm/include/asm/arch-am33xx/clock.h +++ b/arch/arm/include/asm/arch-am33xx/clock.h @@ -13,10 +13,6 @@ #include #include -#if defined(CONFIG_TI816X) -#include -#endif - #define LDELAY 1000000 /*CM___CLKCTRL */ diff --git a/arch/arm/include/asm/arch-am33xx/clock_ti81xx.h b/arch/arm/include/asm/arch-am33xx/clock_ti81xx.h deleted file mode 100644 index d22d958706..0000000000 --- a/arch/arm/include/asm/arch-am33xx/clock_ti81xx.h +++ /dev/null @@ -1,118 +0,0 @@ -/* - * ti81xx.h - * - * Copyright (C) 2013, Adeneo Embedded - * Antoine Tenart, - * - * This file is released under the terms of GPL v2 and any later version. - * See the file COPYING in the root directory of the source tree for details. - */ - -#ifndef _CLOCK_TI81XX_H_ -#define _CLOCK_TI81XX_H_ - -#define PRCM_MOD_EN 0x2 - -#define CM_DEFAULT_BASE (PRCM_BASE + 0x0500) -#define CM_ALWON_BASE (PRCM_BASE + 0x1400) - -struct cm_def { - unsigned int resv0[2]; - unsigned int l3fastclkstctrl; - unsigned int resv1[1]; - unsigned int pciclkstctrl; - unsigned int resv2[1]; - unsigned int ducaticlkstctrl; - unsigned int resv3[1]; - unsigned int emif0clkctrl; - unsigned int emif1clkctrl; - unsigned int dmmclkctrl; - unsigned int fwclkctrl; - unsigned int resv4[10]; - unsigned int usbclkctrl; - unsigned int resv5[1]; - unsigned int sataclkctrl; - unsigned int resv6[4]; - unsigned int ducaticlkctrl; - unsigned int pciclkctrl; -}; - -struct cm_alwon { - unsigned int l3slowclkstctrl; - unsigned int ethclkstctrl; - unsigned int l3medclkstctrl; - unsigned int mmu_clkstctrl; - unsigned int mmucfg_clkstctrl; - unsigned int ocmc0clkstctrl; -#if defined(CONFIG_TI816X) - unsigned int ocmc1clkstctrl; -#endif - unsigned int mpuclkstctrl; - unsigned int sysclk4clkstctrl; - unsigned int sysclk5clkstctrl; - unsigned int sysclk6clkstctrl; - unsigned int rtcclkstctrl; - unsigned int l3fastclkstctrl; - unsigned int resv0[67]; - unsigned int mcasp0clkctrl; - unsigned int mcasp1clkctrl; - unsigned int mcasp2clkctrl; - unsigned int mcbspclkctrl; - unsigned int uart0clkctrl; - unsigned int uart1clkctrl; - unsigned int uart2clkctrl; - unsigned int gpio0clkctrl; - unsigned int gpio1clkctrl; - unsigned int i2c0clkctrl; - unsigned int i2c1clkctrl; -#if defined(CONFIG_TI816X) - unsigned int resv1[1]; - unsigned int timer1clkctrl; - unsigned int timer2clkctrl; - unsigned int timer3clkctrl; - unsigned int timer4clkctrl; - unsigned int timer5clkctrl; - unsigned int timer6clkctrl; - unsigned int timer7clkctrl; -#endif - unsigned int wdtimerclkctrl; - unsigned int spiclkctrl; - unsigned int mailboxclkctrl; - unsigned int spinboxclkctrl; - unsigned int mmudataclkctrl; - unsigned int resv2[2]; - unsigned int mmucfgclkctrl; -#if defined(CONFIG_TI816X) - unsigned int resv3[1]; - unsigned int sdioclkctrl; -#endif - unsigned int ocmc0clkctrl; -#if defined(CONFIG_TI816X) - unsigned int ocmc1clkctrl; -#endif - unsigned int resv4[2]; - unsigned int controlclkctrl; - unsigned int resv5[2]; - unsigned int gpmcclkctrl; - unsigned int ethernet0clkctrl; - unsigned int ethernet1clkctrl; - unsigned int mpuclkctrl; -#if defined(CONFIG_TI816X) - unsigned int resv6[1]; -#endif - unsigned int l3clkctrl; - unsigned int l4hsclkctrl; - unsigned int l4lsclkctrl; - unsigned int rtcclkctrl; - unsigned int tpccclkctrl; - unsigned int tptc0clkctrl; - unsigned int tptc1clkctrl; - unsigned int tptc2clkctrl; - unsigned int tptc3clkctrl; -#if defined(CONFIG_TI816X) - unsigned int sr0clkctrl; - unsigned int sr1clkctrl; -#endif -}; - -#endif /* _CLOCK_TI81XX_H_ */ diff --git a/arch/arm/include/asm/arch-am33xx/ddr_defs.h b/arch/arm/include/asm/arch-am33xx/ddr_defs.h index 15a5b641ff..1a03107107 100644 --- a/arch/arm/include/asm/arch-am33xx/ddr_defs.h +++ b/arch/arm/include/asm/arch-am33xx/ddr_defs.h @@ -369,15 +369,9 @@ struct ddr_ctrl { unsigned int ddrckectrl; }; -#ifdef CONFIG_TI816X -void config_ddr(const struct ddr_data *data, const struct cmd_control *ctrl, - const struct emif_regs *regs, - const struct dmm_lisa_map_regs *lisa_regs, int nrs); -#else void config_ddr(unsigned int pll, const struct ctrl_ioregs *ioregs, const struct ddr_data *data, const struct cmd_control *ctrl, const struct emif_regs *regs, int nr); -#endif void emif_get_ext_phy_ctrl_const_regs(const u32 **regs, u32 *size); #endif /* _DDR_DEFS_H */ diff --git a/arch/arm/include/asm/arch-am33xx/emac_defs.h b/arch/arm/include/asm/arch-am33xx/emac_defs.h deleted file mode 100644 index eb6516da93..0000000000 --- a/arch/arm/include/asm/arch-am33xx/emac_defs.h +++ /dev/null @@ -1,37 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2010 Texas Instruments - * - * Based on: - * - * ---------------------------------------------------------------------------- - * - * dm644x_emac.h - * - * TI DaVinci (DM644X) EMAC peripheral driver header for DV-EVM - * - * Copyright (C) 2005 Texas Instruments. - * - * ---------------------------------------------------------------------------- - * - */ - -#ifndef _EMAC_DEFS_H_ -#define _EMAC_DEFS_H_ - -#ifdef CONFIG_TI816X -#define EMAC_BASE_ADDR (0x4A100000) -#define EMAC_WRAPPER_BASE_ADDR (0x4A100900) -#define EMAC_WRAPPER_RAM_ADDR (0x4A102000) -#define EMAC_MDIO_BASE_ADDR (0x4A100800) -#define EMAC_MDIO_BUS_FREQ (250000000UL) -#define EMAC_MDIO_CLOCK_FREQ (2000000UL) - -typedef volatile unsigned int dv_reg; -typedef volatile unsigned int *dv_reg_p; - -#define DAVINCI_EMAC_VERSION2 -#define DAVINCI_EMAC_GIG_ENABLE -#endif - -#endif /* _EMAC_DEFS_H_ */ diff --git a/arch/arm/include/asm/arch-am33xx/hardware.h b/arch/arm/include/asm/arch-am33xx/hardware.h index 2d7f9da365..387f053ce6 100644 --- a/arch/arm/include/asm/arch-am33xx/hardware.h +++ b/arch/arm/include/asm/arch-am33xx/hardware.h @@ -14,8 +14,6 @@ #include #ifdef CONFIG_AM33XX #include -#elif defined(CONFIG_TI816X) -#include #elif defined(CONFIG_AM43XX) #include #endif diff --git a/arch/arm/include/asm/arch-am33xx/hardware_ti816x.h b/arch/arm/include/asm/arch-am33xx/hardware_ti816x.h deleted file mode 100644 index 78b79486ed..0000000000 --- a/arch/arm/include/asm/arch-am33xx/hardware_ti816x.h +++ /dev/null @@ -1,62 +0,0 @@ -/* - * hardware_ti816x.h - * - * TI816x hardware specific header - * - * Copyright (C) 2013, Adeneo Embedded - * Antoine Tenart, - * Based on TI-PSP-04.00.02.14 - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __AM33XX_HARDWARE_TI816X_H -#define __AM33XX_HARDWARE_TI816X_H - -/* UART */ -#define UART0_BASE 0x48020000 -#define UART1_BASE 0x48022000 -#define UART2_BASE 0x48024000 - -/* Watchdog Timer */ -#define WDT_BASE 0x480C2000 - -/* Control Module Base Address */ -#define CTRL_BASE 0x48140000 -#define CTRL_DEVICE_BASE 0x48140600 - -/* PRCM Base Address */ -#define PRCM_BASE 0x48180000 - -#define PRM_RSTCTRL (PRCM_BASE + 0x00A0) -#define PRM_RSTST (PRM_RSTCTRL + 8) - -/* VTP Base address */ -#define VTP0_CTRL_ADDR 0x48198358 -#define VTP1_CTRL_ADDR 0x4819A358 - -/* DDR Base address */ -#define DDR_PHY_CMD_ADDR 0x48198000 -#define DDR_PHY_DATA_ADDR 0x481980C8 -#define DDR_PHY_CMD_ADDR2 0x4819A000 -#define DDR_PHY_DATA_ADDR2 0x4819A0C8 -#define DDR_DATA_REGS_NR 4 - - -#define DDRPHY_0_CONFIG_BASE 0x48198000 -#define DDRPHY_1_CONFIG_BASE 0x4819A000 -#define DDRPHY_CONFIG_BASE ((emif == 0) ? \ - DDRPHY_0_CONFIG_BASE : DDRPHY_1_CONFIG_BASE) - -/* RTC base address */ -#define RTC_BASE 0x480C0000 - -#endif /* __AM33XX_HARDWARE_TI816X_H */ diff --git a/arch/arm/include/asm/arch-am33xx/mmc_host_def.h b/arch/arm/include/asm/arch-am33xx/mmc_host_def.h index ed15d15c5b..b1b189631a 100644 --- a/arch/arm/include/asm/arch-am33xx/mmc_host_def.h +++ b/arch/arm/include/asm/arch-am33xx/mmc_host_def.h @@ -24,9 +24,4 @@ #define OMAP_HSMMC1_BASE 0x48060000 #define OMAP_HSMMC2_BASE 0x481D8000 -#if defined(CONFIG_TI816X) -#undef MMC_CLOCK_REFERENCE -#define MMC_CLOCK_REFERENCE 48 /* MHz */ -#endif - #endif /* MMC_HOST_DEF_H */ diff --git a/arch/arm/include/asm/arch-am33xx/mux.h b/arch/arm/include/asm/arch-am33xx/mux.h index 7cf973710d..ebb2d303df 100644 --- a/arch/arm/include/asm/arch-am33xx/mux.h +++ b/arch/arm/include/asm/arch-am33xx/mux.h @@ -20,8 +20,6 @@ #ifdef CONFIG_AM33XX #include -#elif defined(CONFIG_TI816X) -#include #elif defined(CONFIG_AM43XX) #include #endif diff --git a/arch/arm/include/asm/arch-am33xx/mux_ti816x.h b/arch/arm/include/asm/arch-am33xx/mux_ti816x.h deleted file mode 100644 index a6a8a988a0..0000000000 --- a/arch/arm/include/asm/arch-am33xx/mux_ti816x.h +++ /dev/null @@ -1,362 +0,0 @@ -/* - * mux_ti816x.h - * - * Copyright (C) 2013, Adeneo Embedded - * Antoine Tenart, - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef _MUX_TI816X_H_ -#define _MUX_TI816X_H_ - -#include - -#define MUX_CFG(value, offset) \ - __raw_writel(value, (CTRL_BASE + offset)); - -#define PULLDOWN_EN (0x0 << 4) /* Pull Down Selection */ -#define PULLUP_EN (0x1 << 4) /* Pull Up Selection */ -#define PULLUDEN (0x0 << 3) /* Pull up enabled */ -#define PULLUDDIS (0x1 << 3) /* Pull up disabled */ -#define MODE(val) (val) /* used for Readability */ - - -/* - * PAD CONTROL OFFSETS - * Field names corresponds to the pad signal name - */ -struct pad_signals { - int pincntl1; - int pincntl2; - int pincntl3; - int pincntl4; - int pincntl5; - int pincntl6; - int pincntl7; - int pincntl8; - int pincntl9; - int pincntl10; - int pincntl11; - int pincntl12; - int pincntl13; - int pincntl14; - int pincntl15; - int pincntl16; - int pincntl17; - int pincntl18; - int pincntl19; - int pincntl20; - int pincntl21; - int pincntl22; - int pincntl23; - int pincntl24; - int pincntl25; - int pincntl26; - int pincntl27; - int pincntl28; - int pincntl29; - int pincntl30; - int pincntl31; - int pincntl32; - int pincntl33; - int pincntl34; - int pincntl35; - int pincntl36; - int pincntl37; - int pincntl38; - int pincntl39; - int pincntl40; - int pincntl41; - int pincntl42; - int pincntl43; - int pincntl44; - int pincntl45; - int pincntl46; - int pincntl47; - int pincntl48; - int pincntl49; - int pincntl50; - int pincntl51; - int pincntl52; - int pincntl53; - int pincntl54; - int pincntl55; - int pincntl56; - int pincntl57; - int pincntl58; - int pincntl59; - int pincntl60; - int pincntl61; - int pincntl62; - int pincntl63; - int pincntl64; - int pincntl65; - int pincntl66; - int pincntl67; - int pincntl68; - int pincntl69; - int pincntl70; - int pincntl71; - int pincntl72; - int pincntl73; - int pincntl74; - int pincntl75; - int pincntl76; - int pincntl77; - int pincntl78; - int pincntl79; - int pincntl80; - int pincntl81; - int pincntl82; - int pincntl83; - int pincntl84; - int pincntl85; - int pincntl86; - int pincntl87; - int pincntl88; - int pincntl89; - int pincntl90; - int pincntl91; - int pincntl92; - int pincntl93; - int pincntl94; - int pincntl95; - int pincntl96; - int pincntl97; - int pincntl98; - int pincntl99; - int pincntl100; - int pincntl101; - int pincntl102; - int pincntl103; - int pincntl104; - int pincntl105; - int pincntl106; - int pincntl107; - int pincntl108; - int pincntl109; - int pincntl110; - int pincntl111; - int pincntl112; - int pincntl113; - int pincntl114; - int pincntl115; - int pincntl116; - int pincntl117; - int pincntl118; - int pincntl119; - int pincntl120; - int pincntl121; - int pincntl122; - int pincntl123; - int pincntl124; - int pincntl125; - int pincntl126; - int pincntl127; - int pincntl128; - int pincntl129; - int pincntl130; - int pincntl131; - int pincntl132; - int pincntl133; - int pincntl134; - int pincntl135; - int pincntl136; - int pincntl137; - int pincntl138; - int pincntl139; - int pincntl140; - int pincntl141; - int pincntl142; - int pincntl143; - int pincntl144; - int pincntl145; - int pincntl146; - int pincntl147; - int pincntl148; - int pincntl149; - int pincntl150; - int pincntl151; - int pincntl152; - int pincntl153; - int pincntl154; - int pincntl155; - int pincntl156; - int pincntl157; - int pincntl158; - int pincntl159; - int pincntl160; - int pincntl161; - int pincntl162; - int pincntl163; - int pincntl164; - int pincntl165; - int pincntl166; - int pincntl167; - int pincntl168; - int pincntl169; - int pincntl170; - int pincntl171; - int pincntl172; - int pincntl173; - int pincntl174; - int pincntl175; - int pincntl176; - int pincntl177; - int pincntl178; - int pincntl179; - int pincntl180; - int pincntl181; - int pincntl182; - int pincntl183; - int pincntl184; - int pincntl185; - int pincntl186; - int pincntl187; - int pincntl188; - int pincntl189; - int pincntl190; - int pincntl191; - int pincntl192; - int pincntl193; - int pincntl194; - int pincntl195; - int pincntl196; - int pincntl197; - int pincntl198; - int pincntl199; - int pincntl200; - int pincntl201; - int pincntl202; - int pincntl203; - int pincntl204; - int pincntl205; - int pincntl206; - int pincntl207; - int pincntl208; - int pincntl209; - int pincntl210; - int pincntl211; - int pincntl212; - int pincntl213; - int pincntl214; - int pincntl215; - int pincntl216; - int pincntl217; - int pincntl218; - int pincntl219; - int pincntl220; - int pincntl221; - int pincntl222; - int pincntl223; - int pincntl224; - int pincntl225; - int pincntl226; - int pincntl227; - int pincntl228; - int pincntl229; - int pincntl230; - int pincntl231; - int pincntl232; - int pincntl233; - int pincntl234; - int pincntl235; - int pincntl236; - int pincntl237; - int pincntl238; - int pincntl239; - int pincntl240; - int pincntl241; - int pincntl242; - int pincntl243; - int pincntl244; - int pincntl245; - int pincntl246; - int pincntl247; - int pincntl248; - int pincntl249; - int pincntl250; - int pincntl251; - int pincntl252; - int pincntl253; - int pincntl254; - int pincntl255; - int pincntl256; - int pincntl257; - int pincntl258; - int pincntl259; - int pincntl260; - int pincntl261; - int pincntl262; - int pincntl263; - int pincntl264; - int pincntl265; - int pincntl266; - int pincntl267; - int pincntl268; - int pincntl269; - int pincntl270; - int pincntl271; - int pincntl272; - int pincntl273; - int pincntl274; - int pincntl275; - int pincntl276; - int pincntl277; - int pincntl278; - int pincntl279; - int pincntl280; - int pincntl281; - int pincntl282; - int pincntl283; - int pincntl284; - int pincntl285; - int pincntl286; - int pincntl287; - int pincntl288; - int pincntl289; - int pincntl290; - int pincntl291; - int pincntl292; - int pincntl293; - int pincntl294; - int pincntl295; - int pincntl296; - int pincntl297; - int pincntl298; - int pincntl299; - int pincntl300; - int pincntl301; - int pincntl302; - int pincntl303; - int pincntl304; - int pincntl305; - int pincntl306; - int pincntl307; - int pincntl308; - int pincntl309; - int pincntl310; - int pincntl311; - int pincntl312; - int pincntl313; - int pincntl314; - int pincntl315; - int pincntl316; - int pincntl317; - int pincntl318; - int pincntl319; - int pincntl320; - int pincntl321; - int pincntl322; - int pincntl323; -}; - -#endif /* endif _MUX_TI816X_H_ */ diff --git a/arch/arm/include/asm/arch-am33xx/omap.h b/arch/arm/include/asm/arch-am33xx/omap.h index 4c71dbf3ab..53046deed5 100644 --- a/arch/arm/include/asm/arch-am33xx/omap.h +++ b/arch/arm/include/asm/arch-am33xx/omap.h @@ -20,10 +20,6 @@ #define NON_SECURE_SRAM_START 0x402F0400 #define NON_SECURE_SRAM_END 0x40310000 #define NON_SECURE_SRAM_IMG_END 0x4030B800 -#elif defined(CONFIG_TI816X) -#define NON_SECURE_SRAM_START 0x40300000 -#define NON_SECURE_SRAM_END 0x40320000 -#define NON_SECURE_SRAM_IMG_END 0x4031B800 #elif defined(CONFIG_AM43XX) #define NON_SECURE_SRAM_START 0x402F0400 #define NON_SECURE_SRAM_END 0x40340000 diff --git a/arch/arm/include/asm/arch-am33xx/spl.h b/arch/arm/include/asm/arch-am33xx/spl.h index 6bd3ca0d07..9ddb346dc9 100644 --- a/arch/arm/include/asm/arch-am33xx/spl.h +++ b/arch/arm/include/asm/arch-am33xx/spl.h @@ -9,19 +9,7 @@ #define BOOT_DEVICE_NONE 0x00 #define BOOT_DEVICE_MMC2_2 0xFF -#if defined(CONFIG_TI816X) -#define BOOT_DEVICE_XIP 0x01 -#define BOOT_DEVICE_XIPWAIT 0x02 -#define BOOT_DEVICE_NAND 0x03 -#define BOOT_DEVICE_ONENAND 0x04 -#define BOOT_DEVICE_MMC2 0x05 /* ROM only supports 2nd instance. */ -#define BOOT_DEVICE_MMC1 0x06 -#define BOOT_DEVICE_UART 0x43 -#define BOOT_DEVICE_USB 0x45 - -#define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC2 -#define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC1 -#elif defined(CONFIG_AM33XX) +#if defined(CONFIG_AM33XX) #define BOOT_DEVICE_XIP 0x01 #define BOOT_DEVICE_XIPWAIT 0x02 #define BOOT_DEVICE_NAND 0x05 diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 309b967b0d..8465b5426d 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -77,16 +77,6 @@ config OMAP54XX imply SPL_SERIAL imply SYS_I2C_OMAP24XX -config TI816X - bool "TI816X SoC" - select SPECIFY_CONSOLE_INDEX - imply NAND_OMAP_ELM - imply NAND_OMAP_GPMC - help - Support for AM335x SOC from Texas Instruments. - The AM335x high performance SOC features a Cortex-A8 - ARM core and more. - config AM43XX bool "AM43XX SoC" select SPECIFY_CONSOLE_INDEX @@ -203,7 +193,6 @@ source "board/BuR/brppt1/Kconfig" source "board/siemens/draco/Kconfig" source "board/siemens/pxm2/Kconfig" source "board/siemens/rut/Kconfig" -source "board/ti/ti816x/Kconfig" source "board/ti/am43xx/Kconfig" source "board/ti/am335x/Kconfig" source "board/compulab/cm_t43/Kconfig" diff --git a/arch/arm/mach-omap2/am33xx/Kconfig b/arch/arm/mach-omap2/am33xx/Kconfig index 1299aec055..8cb0c57163 100644 --- a/arch/arm/mach-omap2/am33xx/Kconfig +++ b/arch/arm/mach-omap2/am33xx/Kconfig @@ -1,13 +1,3 @@ -if TI816X - -config TARGET_TI816X_EVM - bool "Support ti816x_evm" - help - This option specifies support for the TI8168 EVM development platform - with PG2.0 silicon and DDR3 DRAM. - -endif - if AM33XX config AM33XX_CHILISOM diff --git a/arch/arm/mach-omap2/am33xx/Makefile b/arch/arm/mach-omap2/am33xx/Makefile index bf94d345da..2aa8013527 100644 --- a/arch/arm/mach-omap2/am33xx/Makefile +++ b/arch/arm/mach-omap2/am33xx/Makefile @@ -9,13 +9,11 @@ ifneq ($(CONFIG_AM43XX)$(CONFIG_AM33XX),) obj-y += clock.o endif -obj-$(CONFIG_TI816X) += clock_ti816x.o obj-y += sys_info.o obj-y += ddr.o -ifeq ($(CONFIG_TI816X)$(CONFIG_$(SPL_)SKIP_LOWLEVEL_INIT),) +ifeq ($(CONFIG_$(SPL_)SKIP_LOWLEVEL_INIT),) obj-y += emif4.o endif -obj-$(CONFIG_TI816X) += ti816x_emif4.o obj-y += board.o obj-y += mux.o obj-y += prcm-regs.o diff --git a/arch/arm/mach-omap2/am33xx/clock_ti816x.c b/arch/arm/mach-omap2/am33xx/clock_ti816x.c deleted file mode 100644 index ec4cc75381..0000000000 --- a/arch/arm/mach-omap2/am33xx/clock_ti816x.c +++ /dev/null @@ -1,407 +0,0 @@ -/* - * clock_ti816x.c - * - * Clocks for TI816X based boards - * - * Copyright (C) 2013, Adeneo Embedded - * Antoine Tenart, - * - * Based on TI-PSP-04.00.02.14 : - * - * Copyright (C) 2009, Texas Instruments, Incorporated - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include -#include -#include -#include -#include - -#include - -#define CM_PLL_BASE (CTRL_BASE + 0x0400) - -/* Main PLL */ -#define MAIN_N 64 -#define MAIN_P 0x1 -#define MAIN_INTFREQ1 0x8 -#define MAIN_FRACFREQ1 0x800000 -#define MAIN_MDIV1 0x2 -#define MAIN_INTFREQ2 0xE -#define MAIN_FRACFREQ2 0x0 -#define MAIN_MDIV2 0x1 -#define MAIN_INTFREQ3 0x8 -#define MAIN_FRACFREQ3 0xAAAAB0 -#define MAIN_MDIV3 0x3 -#define MAIN_INTFREQ4 0x9 -#define MAIN_FRACFREQ4 0x55554F -#define MAIN_MDIV4 0x3 -#define MAIN_INTFREQ5 0x9 -#define MAIN_FRACFREQ5 0x374BC6 -#define MAIN_MDIV5 0xC -#define MAIN_MDIV6 0x48 -#define MAIN_MDIV7 0x4 - -/* DDR PLL */ -#define DDR_N 59 -#define DDR_P 0x1 -#define DDR_MDIV1 0x2 -#define DDR_INTFREQ2 0x8 -#define DDR_FRACFREQ2 0xD99999 -#define DDR_MDIV2 0x1E -#define DDR_INTFREQ3 0x8 -#define DDR_FRACFREQ3 0x0 -#define DDR_MDIV3 0x4 -#define DDR_INTFREQ4 0xE /* Expansion DDR clk */ -#define DDR_FRACFREQ4 0x0 -#define DDR_MDIV4 0x4 -#define DDR_INTFREQ5 0xE /* Expansion DDR clk */ -#define DDR_FRACFREQ5 0x0 -#define DDR_MDIV5 0x4 - -#define CONTROL_STATUS (CTRL_BASE + 0x40) -#define DDR_RCD (CTRL_BASE + 0x070C) -#define CM_TIMER1_CLKSEL (PRCM_BASE + 0x390) -#define CM_ALWON_CUST_EFUSE_CLKCTRL (PRCM_BASE + 0x1628) - -#define INTCPS_SYSCONFIG 0x48200010 -#define CM_SYSCLK10_CLKSEL 0x48180324 - -struct cm_pll { - unsigned int mainpll_ctrl; /* offset 0x400 */ - unsigned int mainpll_pwd; - unsigned int mainpll_freq1; - unsigned int mainpll_div1; - unsigned int mainpll_freq2; - unsigned int mainpll_div2; - unsigned int mainpll_freq3; - unsigned int mainpll_div3; - unsigned int mainpll_freq4; - unsigned int mainpll_div4; - unsigned int mainpll_freq5; - unsigned int mainpll_div5; - unsigned int resv0[1]; - unsigned int mainpll_div6; - unsigned int resv1[1]; - unsigned int mainpll_div7; - unsigned int ddrpll_ctrl; /* offset 0x440 */ - unsigned int ddrpll_pwd; - unsigned int resv2[1]; - unsigned int ddrpll_div1; - unsigned int ddrpll_freq2; - unsigned int ddrpll_div2; - unsigned int ddrpll_freq3; - unsigned int ddrpll_div3; - unsigned int ddrpll_freq4; - unsigned int ddrpll_div4; - unsigned int ddrpll_freq5; - unsigned int ddrpll_div5; - unsigned int videopll_ctrl; /* offset 0x470 */ - unsigned int videopll_pwd; - unsigned int videopll_freq1; - unsigned int videopll_div1; - unsigned int videopll_freq2; - unsigned int videopll_div2; - unsigned int videopll_freq3; - unsigned int videopll_div3; - unsigned int resv3[4]; - unsigned int audiopll_ctrl; /* offset 0x4A0 */ - unsigned int audiopll_pwd; - unsigned int resv4[2]; - unsigned int audiopll_freq2; - unsigned int audiopll_div2; - unsigned int audiopll_freq3; - unsigned int audiopll_div3; - unsigned int audiopll_freq4; - unsigned int audiopll_div4; - unsigned int audiopll_freq5; - unsigned int audiopll_div5; -}; - -const struct cm_alwon *cmalwon = (struct cm_alwon *)CM_ALWON_BASE; -const struct cm_def *cmdef = (struct cm_def *)CM_DEFAULT_BASE; -const struct cm_pll *cmpll = (struct cm_pll *)CM_PLL_BASE; -const struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE; - -void enable_dmm_clocks(void) -{ - writel(PRCM_MOD_EN, &cmdef->dmmclkctrl); - /* Wait for dmm to be fully functional, including OCP */ - while (((readl(&cmdef->dmmclkctrl) >> 17) & 0x3) != 0) - ; -} - -void enable_emif_clocks(void) -{ - writel(PRCM_MOD_EN, &cmdef->fwclkctrl); - writel(PRCM_MOD_EN, &cmdef->l3fastclkstctrl); - writel(PRCM_MOD_EN, &cmdef->emif0clkctrl); - writel(PRCM_MOD_EN, &cmdef->emif1clkctrl); - - /* Wait for clocks to be active */ - while ((readl(&cmdef->l3fastclkstctrl) & 0x300) != 0x300) - ; - /* Wait for emif0 to be fully functional, including OCP */ - while (((readl(&cmdef->emif0clkctrl) >> 17) & 0x3) != 0) - ; - /* Wait for emif1 to be fully functional, including OCP */ - while (((readl(&cmdef->emif1clkctrl) >> 17) & 0x3) != 0) - ; -} - -/* assume delay is aprox at least 1us */ -static void ddr_delay(int d) -{ - int i; - - /* - * read a control register. - * this is a bit more delay and cannot be optimized by the compiler - * assuming one read takes 200 cycles and A8 is runing 1 GHz - * somewhat conservative setting - */ - for (i = 0; i < 50*d; i++) - readl(CONTROL_STATUS); -} - -static void main_pll_init_ti816x(void) -{ - u32 main_pll_ctrl = 0; - - /* Put the PLL in bypass mode by setting BIT2 in its ctrl reg */ - main_pll_ctrl = readl(&cmpll->mainpll_ctrl); - main_pll_ctrl &= 0xFFFFFFFB; - main_pll_ctrl |= BIT(2); - writel(main_pll_ctrl, &cmpll->mainpll_ctrl); - - /* Enable PLL by setting BIT3 in its ctrl reg */ - main_pll_ctrl = readl(&cmpll->mainpll_ctrl); - main_pll_ctrl &= 0xFFFFFFF7; - main_pll_ctrl |= BIT(3); - writel(main_pll_ctrl, &cmpll->mainpll_ctrl); - - /* Write the values of N,P in the CTRL reg */ - main_pll_ctrl = readl(&cmpll->mainpll_ctrl); - main_pll_ctrl &= 0xFF; - main_pll_ctrl |= (MAIN_N<<16 | MAIN_P<<8); - writel(main_pll_ctrl, &cmpll->mainpll_ctrl); - - /* Power up clock1-7 */ - writel(0x0, &cmpll->mainpll_pwd); - - /* Program the freq and divider values for clock1-7 */ - writel((1<<31 | 1<<28 | (MAIN_INTFREQ1<<24) | MAIN_FRACFREQ1), - &cmpll->mainpll_freq1); - writel(((1<<8) | MAIN_MDIV1), &cmpll->mainpll_div1); - - writel((1<<31 | 1<<28 | (MAIN_INTFREQ2<<24) | MAIN_FRACFREQ2), - &cmpll->mainpll_freq2); - writel(((1<<8) | MAIN_MDIV2), &cmpll->mainpll_div2); - - writel((1<<31 | 1<<28 | (MAIN_INTFREQ3<<24) | MAIN_FRACFREQ3), - &cmpll->mainpll_freq3); - writel(((1<<8) | MAIN_MDIV3), &cmpll->mainpll_div3); - - writel((1<<31 | 1<<28 | (MAIN_INTFREQ4<<24) | MAIN_FRACFREQ4), - &cmpll->mainpll_freq4); - writel(((1<<8) | MAIN_MDIV4), &cmpll->mainpll_div4); - - writel((1<<31 | 1<<28 | (MAIN_INTFREQ5<<24) | MAIN_FRACFREQ5), - &cmpll->mainpll_freq5); - writel(((1<<8) | MAIN_MDIV5), &cmpll->mainpll_div5); - - writel((1<<8 | MAIN_MDIV6), &cmpll->mainpll_div6); - - writel((1<<8 | MAIN_MDIV7), &cmpll->mainpll_div7); - - /* Wait for PLL to lock */ - while ((readl(&cmpll->mainpll_ctrl) & BIT(7)) != BIT(7)) - ; - - /* Put the PLL in normal mode, disable bypass */ - main_pll_ctrl = readl(&cmpll->mainpll_ctrl); - main_pll_ctrl &= 0xFFFFFFFB; - writel(main_pll_ctrl, &cmpll->mainpll_ctrl); -} - -static void ddr_pll_bypass_ti816x(void) -{ - u32 ddr_pll_ctrl = 0; - - /* Put the PLL in bypass mode by setting BIT2 in its ctrl reg */ - ddr_pll_ctrl = readl(&cmpll->ddrpll_ctrl); - ddr_pll_ctrl &= 0xFFFFFFFB; - ddr_pll_ctrl |= BIT(2); - writel(ddr_pll_ctrl, &cmpll->ddrpll_ctrl); -} - -static void ddr_pll_init_ti816x(void) -{ - u32 ddr_pll_ctrl = 0; - /* Enable PLL by setting BIT3 in its ctrl reg */ - ddr_pll_ctrl = readl(&cmpll->ddrpll_ctrl); - ddr_pll_ctrl &= 0xFFFFFFF7; - ddr_pll_ctrl |= BIT(3); - writel(ddr_pll_ctrl, &cmpll->ddrpll_ctrl); - - /* Write the values of N,P in the CTRL reg */ - ddr_pll_ctrl = readl(&cmpll->ddrpll_ctrl); - ddr_pll_ctrl &= 0xFF; - ddr_pll_ctrl |= (DDR_N<<16 | DDR_P<<8); - writel(ddr_pll_ctrl, &cmpll->ddrpll_ctrl); - - ddr_delay(10); - - /* Power up clock1-5 */ - writel(0x0, &cmpll->ddrpll_pwd); - - /* Program the freq and divider values for clock1-3 */ - writel(((0<<8) | DDR_MDIV1), &cmpll->ddrpll_div1); - ddr_delay(1); - writel(((1<<8) | DDR_MDIV1), &cmpll->ddrpll_div1); - writel((1<<31 | 1<<28 | (DDR_INTFREQ2<<24) | DDR_FRACFREQ2), - &cmpll->ddrpll_freq2); - writel(((1<<8) | DDR_MDIV2), &cmpll->ddrpll_div2); - writel(((0<<8) | DDR_MDIV3), &cmpll->ddrpll_div3); - ddr_delay(1); - writel(((1<<8) | DDR_MDIV3), &cmpll->ddrpll_div3); - ddr_delay(1); - writel((0<<31 | 1<<28 | (DDR_INTFREQ3<<24) | DDR_FRACFREQ3), - &cmpll->ddrpll_freq3); - ddr_delay(1); - writel((1<<31 | 1<<28 | (DDR_INTFREQ3<<24) | DDR_FRACFREQ3), - &cmpll->ddrpll_freq3); - - ddr_delay(5); - - /* Wait for PLL to lock */ - while ((readl(&cmpll->ddrpll_ctrl) & BIT(7)) != BIT(7)) - ; - - /* Power up RCD */ - writel(BIT(0), DDR_RCD); -} - -static void peripheral_enable(void) -{ - /* Wake-up the l3_slow clock */ - writel(PRCM_MOD_EN, &cmalwon->l3slowclkstctrl); - - /* - * Note on Timers: - * There are 8 timers(0-7) out of which timer 0 is a secure timer. - * Timer 0 mux should not be changed - * - * To access the timer registers we need the to be - * enabled which is what we do in the first step - */ - - /* Enable timer1 */ - writel(PRCM_MOD_EN, &cmalwon->timer1clkctrl); - /* Select timer1 clock to be CLKIN (27MHz) */ - writel(BIT(1), CM_TIMER1_CLKSEL); - - /* Wait for timer1 to be ON-ACTIVE */ - while (((readl(&cmalwon->l3slowclkstctrl) - & (0x80000<<1))>>20) != 1) - ; - /* Wait for timer1 to be enabled */ - while (((readl(&cmalwon->timer1clkctrl) & 0x30000)>>16) != 0) - ; - /* Active posted mode */ - writel(PRCM_MOD_EN, (DM_TIMER1_BASE + 0x54)); - while (readl(DM_TIMER1_BASE + 0x10) & BIT(0)) - ; - /* Start timer1 */ - writel(BIT(0), (DM_TIMER1_BASE + 0x38)); - - /* eFuse */ - writel(PRCM_MOD_EN, CM_ALWON_CUST_EFUSE_CLKCTRL); - while (readl(CM_ALWON_CUST_EFUSE_CLKCTRL) != PRCM_MOD_EN) - ; - - /* Enable gpio0 */ - writel(PRCM_MOD_EN, &cmalwon->gpio0clkctrl); - while (readl(&cmalwon->gpio0clkctrl) != PRCM_MOD_EN) - ; - writel((BIT(1) | BIT(8)), &cmalwon->gpio0clkctrl); - - /* Enable gpio1 */ - writel(PRCM_MOD_EN, &cmalwon->gpio1clkctrl); - while (readl(&cmalwon->gpio1clkctrl) != PRCM_MOD_EN) - ; - writel((BIT(1) | BIT(8)), &cmalwon->gpio1clkctrl); - - /* Enable spi */ - writel(PRCM_MOD_EN, &cmalwon->spiclkctrl); - while (readl(&cmalwon->spiclkctrl) != PRCM_MOD_EN) - ; - - /* Enable i2c0 */ - writel(PRCM_MOD_EN, &cmalwon->i2c0clkctrl); - while (readl(&cmalwon->i2c0clkctrl) != PRCM_MOD_EN) - ; - - /* Enable ethernet0 */ - writel(PRCM_MOD_EN, &cmalwon->ethclkstctrl); - writel(PRCM_MOD_EN, &cmalwon->ethernet0clkctrl); - writel(PRCM_MOD_EN, &cmalwon->ethernet1clkctrl); - - /* Enable hsmmc */ - writel(PRCM_MOD_EN, &cmalwon->sdioclkctrl); - while (readl(&cmalwon->sdioclkctrl) != PRCM_MOD_EN) - ; -} - -void setup_clocks_for_console(void) -{ - /* Fix ROM code bug - from TI-PSP-04.00.02.14 */ - writel(0x0, CM_SYSCLK10_CLKSEL); - - ddr_pll_bypass_ti816x(); - - /* Enable uart0-2 */ - writel(PRCM_MOD_EN, &cmalwon->uart0clkctrl); - while (readl(&cmalwon->uart0clkctrl) != PRCM_MOD_EN) - ; - writel(PRCM_MOD_EN, &cmalwon->uart1clkctrl); - while (readl(&cmalwon->uart1clkctrl) != PRCM_MOD_EN) - ; - writel(PRCM_MOD_EN, &cmalwon->uart2clkctrl); - while (readl(&cmalwon->uart2clkctrl) != PRCM_MOD_EN) - ; - while ((readl(&cmalwon->l3slowclkstctrl) & 0x2100) != 0x2100) - ; -} - -void setup_early_clocks(void) -{ - setup_clocks_for_console(); -} - -void prcm_init(void) -{ - /* Enable the control */ - writel(PRCM_MOD_EN, &cmalwon->controlclkctrl); - - main_pll_init_ti816x(); - ddr_pll_init_ti816x(); - - /* - * With clk freqs setup to desired values, - * enable the required peripherals - */ - peripheral_enable(); -} diff --git a/arch/arm/mach-omap2/am33xx/ddr.c b/arch/arm/mach-omap2/am33xx/ddr.c index f8434ecf57..5f970d93f0 100644 --- a/arch/arm/mach-omap2/am33xx/ddr.c +++ b/arch/arm/mach-omap2/am33xx/ddr.c @@ -182,14 +182,6 @@ void config_sdram_emif4d5(const struct emif_regs *regs, int nr) */ void config_sdram(const struct emif_regs *regs, int nr) { -#ifdef CONFIG_TI816X - writel(regs->sdram_config, &emif_reg[nr]->emif_sdram_config); - writel(regs->emif_ddr_phy_ctlr_1, &emif_reg[nr]->emif_ddr_phy_ctrl_1); - writel(regs->emif_ddr_phy_ctlr_1, &emif_reg[nr]->emif_ddr_phy_ctrl_1_shdw); - writel(0x0000613B, &emif_reg[nr]->emif_sdram_ref_ctrl); /* initially a large refresh period */ - writel(0x1000613B, &emif_reg[nr]->emif_sdram_ref_ctrl); /* trigger initialization */ - writel(regs->ref_ctrl, &emif_reg[nr]->emif_sdram_ref_ctrl); -#else if (regs->zq_config) { writel(regs->zq_config, &emif_reg[nr]->emif_zq_config); writel(regs->sdram_config, &cstat->secure_emif_sdram_config); @@ -211,7 +203,6 @@ void config_sdram(const struct emif_regs *regs, int nr) /* Write REG_COS_COUNT_1, REG_COS_COUNT_2, and REG_PR_OLD_COUNT. */ if (regs->ocp_config) writel(regs->ocp_config, &emif_reg[nr]->emif_l3_config); -#endif } /** diff --git a/arch/arm/mach-omap2/am33xx/ti816x_emif4.c b/arch/arm/mach-omap2/am33xx/ti816x_emif4.c deleted file mode 100644 index 707ea807ac..0000000000 --- a/arch/arm/mach-omap2/am33xx/ti816x_emif4.c +++ /dev/null @@ -1,165 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * ti816x_emif4.c - * - * TI816x emif4 configuration file - * - * Copyright (C) 2017, Konsulko Group - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/********************************************************************* - * Init DDR3 on TI816X EVM - *********************************************************************/ -static void ddr_init_settings(const struct cmd_control *ctrl, int emif) -{ - /* - * setup use_rank_delays to 1. This is only necessary when - * multiple ranks are in use. Though the EVM does not have - * multiple ranks, this is a good value to set. - */ - writel(1, DDRPHY_CONFIG_BASE + 0x134); // DATA0_REG_PHY_USE_RANK0_DELAYS - writel(1, DDRPHY_CONFIG_BASE + 0x1d8); // DATA1_REG_PHY_USE_RANK0_DELAYS - writel(1, DDRPHY_CONFIG_BASE + 0x27c); // DATA2_REG_PHY_USE_RANK0_DELAYS - writel(1, DDRPHY_CONFIG_BASE + 0x320); // DATA3_REG_PHY_USE_RANK0_DELAYS - - config_cmd_ctrl(ctrl, emif); - - /* for ddr3 this needs to be set to 1 */ - writel(0x1, DDRPHY_CONFIG_BASE + 0x0F8); /* init mode */ - writel(0x1, DDRPHY_CONFIG_BASE + 0x104); - writel(0x1, DDRPHY_CONFIG_BASE + 0x19C); - writel(0x1, DDRPHY_CONFIG_BASE + 0x1A8); - writel(0x1, DDRPHY_CONFIG_BASE + 0x240); - writel(0x1, DDRPHY_CONFIG_BASE + 0x24C); - writel(0x1, DDRPHY_CONFIG_BASE + 0x2E4); - writel(0x1, DDRPHY_CONFIG_BASE + 0x2F0); - - /* - * This represents the initial value for the leveling process. The - * value is a ratio - so 0x100 represents one cycle. The real delay - * is determined through the leveling process. - * - * During the leveling process, 0x20 is subtracted from the value, so - * we have added that to the value we want to set. We also set the - * values such that byte3 completes leveling after byte2 and byte1 - * after byte0. - */ - writel((0x20 << 10) | 0x20, DDRPHY_CONFIG_BASE + 0x0F0); /* data0 writelvl init ratio */ - writel(0x0, DDRPHY_CONFIG_BASE + 0x0F4); /* */ - writel((0x20 << 10) | 0x20, DDRPHY_CONFIG_BASE + 0x194); /* data1 writelvl init ratio */ - writel(0x0, DDRPHY_CONFIG_BASE + 0x198); /* */ - writel((0x20 << 10) | 0x20, DDRPHY_CONFIG_BASE + 0x238); /* data2 writelvl init ratio */ - writel(0x0, DDRPHY_CONFIG_BASE + 0x23c); /* */ - writel((0x20 << 10) | 0x20, DDRPHY_CONFIG_BASE + 0x2dc); /* data3 writelvl init ratio */ - writel(0x0, DDRPHY_CONFIG_BASE + 0x2e0); /* */ - - - writel((0x20 << 10) | 0x20, DDRPHY_CONFIG_BASE + 0x0FC); /* data0 gatelvl init ratio */ - writel(0x0, DDRPHY_CONFIG_BASE + 0x100); - writel((0x20 << 10) | 0x20, DDRPHY_CONFIG_BASE + 0x1A0); /* data1 gatelvl init ratio */ - writel(0x0, DDRPHY_CONFIG_BASE + 0x1A4); - writel((0x20 << 10) | 0x20, DDRPHY_CONFIG_BASE + 0x244); /* data2 gatelvl init ratio */ - writel(0x0, DDRPHY_CONFIG_BASE + 0x248); - writel((0x20 << 10) | 0x20, DDRPHY_CONFIG_BASE + 0x2E8); /* data3 gatelvl init ratio */ - writel(0x0, DDRPHY_CONFIG_BASE + 0x2EC); - - writel(0x5, DDRPHY_CONFIG_BASE + 0x00C); /* cmd0 io config - output impedance of pad */ - writel(0x5, DDRPHY_CONFIG_BASE + 0x010); /* cmd0 io clk config - output impedance of pad */ - writel(0x5, DDRPHY_CONFIG_BASE + 0x040); /* cmd1 io config - output impedance of pad */ - writel(0x5, DDRPHY_CONFIG_BASE + 0x044); /* cmd1 io clk config - output impedance of pad */ - writel(0x5, DDRPHY_CONFIG_BASE + 0x074); /* cmd2 io config - output impedance of pad */ - writel(0x5, DDRPHY_CONFIG_BASE + 0x078); /* cmd2 io clk config - output impedance of pad */ - writel(0x4, DDRPHY_CONFIG_BASE + 0x0A8); /* data0 io config - output impedance of pad */ - writel(0x4, DDRPHY_CONFIG_BASE + 0x0AC); /* data0 io clk config - output impedance of pad */ - writel(0x4, DDRPHY_CONFIG_BASE + 0x14C); /* data1 io config - output impedance of pa */ - writel(0x4, DDRPHY_CONFIG_BASE + 0x150); /* data1 io clk config - output impedance of pad */ - writel(0x4, DDRPHY_CONFIG_BASE + 0x1F0); /* data2 io config - output impedance of pa */ - writel(0x4, DDRPHY_CONFIG_BASE + 0x1F4); /* data2 io clk config - output impedance of pad */ - writel(0x4, DDRPHY_CONFIG_BASE + 0x294); /* data3 io config - output impedance of pa */ - writel(0x4, DDRPHY_CONFIG_BASE + 0x298); /* data3 io clk config - output impedance of pad */ -} - -static void ddr3_sw_levelling(const struct ddr_data *data, int emif) -{ - /* Set the correct value to DDR_VTP_CTRL_0 */ - writel(0x6, (DDRPHY_CONFIG_BASE + 0x358)); - - writel(data->datafwsratio0, (DDRPHY_CONFIG_BASE + 0x108)); - writel(data->datafwsratio0, (DDRPHY_CONFIG_BASE + 0x1AC)); - writel(data->datafwsratio0, (DDRPHY_CONFIG_BASE + 0x250)); - writel(data->datafwsratio0, (DDRPHY_CONFIG_BASE + 0x2F4)); - - writel(data->datawdsratio0, (DDRPHY_CONFIG_BASE + 0x0DC)); - writel(data->datawdsratio0, (DDRPHY_CONFIG_BASE + 0x180)); - writel(data->datawdsratio0, (DDRPHY_CONFIG_BASE + 0x224)); - writel(data->datawdsratio0, (DDRPHY_CONFIG_BASE + 0x2C8)); - - writel(data->datawrsratio0, (DDRPHY_CONFIG_BASE + 0x120)); - writel(data->datawrsratio0, (DDRPHY_CONFIG_BASE + 0x1C4)); - writel(data->datawrsratio0, (DDRPHY_CONFIG_BASE + 0x268)); - writel(data->datawrsratio0, (DDRPHY_CONFIG_BASE + 0x30C)); - - writel(data->datardsratio0, (DDRPHY_CONFIG_BASE + 0x0C8)); - writel(data->datardsratio0, (DDRPHY_CONFIG_BASE + 0x16C)); - writel(data->datardsratio0, (DDRPHY_CONFIG_BASE + 0x210)); - writel(data->datardsratio0, (DDRPHY_CONFIG_BASE + 0x2B4)); -} - -static struct dmm_lisa_map_regs *hw_lisa_map_regs = - (struct dmm_lisa_map_regs *)DMM_BASE; - -#define DMM_PAT_BASE_ADDR (DMM_BASE + 0x420) -void config_dmm(const struct dmm_lisa_map_regs *regs) -{ - writel(0, &hw_lisa_map_regs->dmm_lisa_map_3); - writel(0, &hw_lisa_map_regs->dmm_lisa_map_2); - writel(0, &hw_lisa_map_regs->dmm_lisa_map_1); - writel(0, &hw_lisa_map_regs->dmm_lisa_map_0); - - writel(regs->dmm_lisa_map_3, &hw_lisa_map_regs->dmm_lisa_map_3); - writel(regs->dmm_lisa_map_2, &hw_lisa_map_regs->dmm_lisa_map_2); - writel(regs->dmm_lisa_map_1, &hw_lisa_map_regs->dmm_lisa_map_1); - writel(regs->dmm_lisa_map_0, &hw_lisa_map_regs->dmm_lisa_map_0); - - /* Enable Tiled Access */ - writel(0x80000000, DMM_PAT_BASE_ADDR); -} - -void config_ddr(const struct ddr_data *data, const struct cmd_control *ctrl, - const struct emif_regs *regs, - const struct dmm_lisa_map_regs *lisa_regs, int nrs) -{ - int i; - - enable_emif_clocks(); - - for (i = 0; i < nrs; i++) - ddr_init_settings(ctrl, i); - - enable_dmm_clocks(); - - /* Program the DMM to for non-interleaved configuration */ - config_dmm(lisa_regs); - - /* Program EMIF CFG Registers */ - for (i = 0; i < nrs; i++) { - set_sdram_timings(regs, i); - config_sdram(regs, i); - } - - udelay(1000); - for (i = 0; i < nrs; i++) - ddr3_sw_levelling(data, i); - - udelay(50000); /* Some delay needed */ -} diff --git a/arch/arm/mach-omap2/boot-common.c b/arch/arm/mach-omap2/boot-common.c index 9a342a1bf9..a2dd5f6df0 100644 --- a/arch/arm/mach-omap2/boot-common.c +++ b/arch/arm/mach-omap2/boot-common.c @@ -74,23 +74,6 @@ void save_omap_boot_params(void) */ if (boot_device == BOOT_DEVICE_QSPI_4) boot_device = BOOT_DEVICE_SPI; -#endif -#ifdef CONFIG_TI816X - /* - * On PG2.0 and later TI816x the values we get when booting are not the - * same as on PG1.0, which is what the defines are based on. Update - * them as needed. - */ - if (get_cpu_rev() != 1) { - if (boot_device == 0x05) { - omap_boot_params->boot_device = BOOT_DEVICE_NAND; - boot_device = BOOT_DEVICE_NAND; - } - if (boot_device == 0x08) { - omap_boot_params->boot_device = BOOT_DEVICE_MMC1; - boot_device = BOOT_DEVICE_MMC1; - } - } #endif /* * When booting from peripheral booting, the boot device is not usable @@ -183,8 +166,7 @@ void save_omap_boot_params(void) gd->arch.omap_boot_mode = boot_mode; -#if !defined(CONFIG_TI816X) && \ - !defined(CONFIG_AM33XX) && !defined(CONFIG_AM43XX) +#if !defined(CONFIG_AM33XX) && !defined(CONFIG_AM43XX) /* CH flags */ diff --git a/board/ti/ti816x/Kconfig b/board/ti/ti816x/Kconfig deleted file mode 100644 index 95973b47f1..0000000000 --- a/board/ti/ti816x/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -if TARGET_TI816X_EVM - -config SYS_BOARD - default "ti816x" - -config SYS_VENDOR - default "ti" - -config SYS_SOC - default "am33xx" - -config SYS_CONFIG_NAME - default "ti816x_evm" - -endif diff --git a/board/ti/ti816x/MAINTAINERS b/board/ti/ti816x/MAINTAINERS deleted file mode 100644 index fd9a98fc76..0000000000 --- a/board/ti/ti816x/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -TI816X BOARD -M: Tom Rini -S: Maintained -F: board/ti/ti816x/ -F: include/configs/ti816x_evm.h -F: configs/ti816x_evm_defconfig diff --git a/board/ti/ti816x/Makefile b/board/ti/ti816x/Makefile deleted file mode 100644 index f12712aea6..0000000000 --- a/board/ti/ti816x/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# Copyright (C) 2013, Adeneo Embedded -# Antoine Tenart, -# -# Based on TI-PSP-04.00.02.14 : -# -# Copyright (C) 2009, Texas Instruments, Incorporated - -obj-y := evm.o diff --git a/board/ti/ti816x/evm.c b/board/ti/ti816x/evm.c deleted file mode 100644 index 8c708355d4..0000000000 --- a/board/ti/ti816x/evm.c +++ /dev/null @@ -1,140 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * evm.c - * - * Copyright (C) 2013, Adeneo Embedded - * Antoine Tenart, - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -int board_init(void) -{ - gd->bd->bi_boot_params = CFG_SYS_SDRAM_BASE + 0x100; -#if defined(CONFIG_MTD_RAW_NAND) - gpmc_init(); -#endif - return 0; -} - -int board_eth_init(struct bd_info *bis) -{ - uint8_t mac_addr[6]; - uint32_t mac_hi, mac_lo; - struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; - - if (!eth_env_get_enetaddr("ethaddr", mac_addr)) { - printf(" not set. Reading from E-fuse\n"); - /* try reading mac address from efuse */ - mac_lo = readl(&cdev->macid0l); - mac_hi = readl(&cdev->macid0h); - mac_addr[0] = mac_hi & 0xFF; - mac_addr[1] = (mac_hi & 0xFF00) >> 8; - mac_addr[2] = (mac_hi & 0xFF0000) >> 16; - mac_addr[3] = (mac_hi & 0xFF000000) >> 24; - mac_addr[4] = mac_lo & 0xFF; - mac_addr[5] = (mac_lo & 0xFF00) >> 8; - - if (is_valid_ethaddr(mac_addr)) - eth_env_set_enetaddr("ethaddr", mac_addr); - else - printf("Unable to read MAC address. Set \n"); - } - - return 0; -} - -#ifdef CONFIG_SPL_BUILD -static struct module_pin_mux mmc_pin_mux[] = { - { OFFSET(pincntl157), PULLDOWN_EN | PULLUDDIS | MODE(0x0) }, - { OFFSET(pincntl158), PULLDOWN_EN | PULLUDEN | MODE(0x0) }, - { OFFSET(pincntl159), PULLUP_EN | PULLUDDIS | MODE(0x0) }, - { OFFSET(pincntl160), PULLUP_EN | PULLUDDIS | MODE(0x0) }, - { OFFSET(pincntl161), PULLUP_EN | PULLUDDIS | MODE(0x0) }, - { OFFSET(pincntl162), PULLUP_EN | PULLUDDIS | MODE(0x0) }, - { OFFSET(pincntl163), PULLUP_EN | PULLUDDIS | MODE(0x0) }, - { -1 }, -}; - -void set_uart_mux_conf(void) {} - -void set_mux_conf_regs(void) -{ - configure_module_pin_mux(mmc_pin_mux); -} - -/* - * EMIF Paramters. Refer the EMIF register documentation and the - * memory datasheet for details. This is for 796 MHz. - */ -#define EMIF_TIM1 0x1779C9FE -#define EMIF_TIM2 0x50608074 -#define EMIF_TIM3 0x009F857F -#define EMIF_SDREF 0x10001841 -#define EMIF_SDCFG 0x62A73832 -#define EMIF_PHYCFG 0x00000110 -static const struct emif_regs ddr3_emif_regs = { - .sdram_config = EMIF_SDCFG, - .ref_ctrl = EMIF_SDREF, - .sdram_tim1 = EMIF_TIM1, - .sdram_tim2 = EMIF_TIM2, - .sdram_tim3 = EMIF_TIM3, - .emif_ddr_phy_ctlr_1 = EMIF_PHYCFG, -}; - -static const struct cmd_control ddr3_ctrl = { - .cmd0csratio = 0x100, - .cmd0iclkout = 0x001, - .cmd1csratio = 0x100, - .cmd1iclkout = 0x001, - .cmd2csratio = 0x100, - .cmd2iclkout = 0x001, -}; - -/* These values are obtained from the CCS app */ -#define RD_DQS_GATE (0x1B3) -#define RD_DQS (0x35) -#define WR_DQS (0x93) -static struct ddr_data ddr3_data = { - .datardsratio0 = ((RD_DQS<<10) | (RD_DQS<<0)), - .datawdsratio0 = ((WR_DQS<<10) | (WR_DQS<<0)), - .datawiratio0 = ((0x20<<10) | 0x20<<0), - .datagiratio0 = ((0x20<<10) | 0x20<<0), - .datafwsratio0 = ((RD_DQS_GATE<<10) | (RD_DQS_GATE<<0)), - .datawrsratio0 = (((WR_DQS+0x40)<<10) | ((WR_DQS+0x40)<<0)), -}; - -static const struct dmm_lisa_map_regs evm_lisa_map_regs = { - .dmm_lisa_map_0 = 0x00000000, - .dmm_lisa_map_1 = 0x00000000, - .dmm_lisa_map_2 = 0x80640300, - .dmm_lisa_map_3 = 0xC0640320, -}; - -void sdram_init(void) -{ - /* - * Pass in our DDR3 config information and that we have 2 EMIFs to - * configure. - */ - config_ddr(&ddr3_data, &ddr3_ctrl, &ddr3_emif_regs, - &evm_lisa_map_regs, 2); -} -#endif /* CONFIG_SPL_BUILD */ diff --git a/configs/ti816x_evm_defconfig b/configs/ti816x_evm_defconfig deleted file mode 100644 index a4bc993297..0000000000 --- a/configs/ti816x_evm_defconfig +++ /dev/null @@ -1,82 +0,0 @@ -CONFIG_ARM=y -CONFIG_SKIP_LOWLEVEL_INIT=y -CONFIG_ARCH_OMAP2PLUS=y -CONFIG_SYS_MALLOC_F_LEN=0x400 -CONFIG_SPL_GPIO=y -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4031ff00 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x1C0000 -CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="dm8168-evm" -CONFIG_SPL_TEXT_BASE=0x40400000 -CONFIG_TI816X=y -CONFIG_TARGET_TI816X_EVM=y -CONFIG_SPL_MMC=y -CONFIG_SPL_SERIAL=y -CONFIG_SPL=y -CONFIG_ENV_OFFSET_REDUND=0x1E0000 -CONFIG_SYS_CLK_FREQ=27000000 -CONFIG_SPL_FS_FAT=y -CONFIG_SPL_LIBDISK_SUPPORT=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_BOOTDELAY=3 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyO2,115200n8 noinitrd earlyprintk" -CONFIG_BOOTCOMMAND="mmc rescan;fatload mmc 0 ${loadaddr} uImage;bootm ${loadaddr}" -CONFIG_SYS_CONSOLE_INFO_QUIET=y -# CONFIG_DISPLAY_BOARDINFO is not set -# CONFIG_MISC_INIT_R is not set -CONFIG_SPL_MAX_SIZE=0xfff1b400 -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 -CONFIG_SPL_NAND_SUPPORT=y -CONFIG_SPL_NAND_DRIVERS=y -CONFIG_SPL_NAND_ECC=y -CONFIG_SPL_NAND_BASE=y -CONFIG_SYS_MAXARGS=64 -CONFIG_CMD_ASKENV=y -# CONFIG_CMD_FLASH is not set -CONFIG_CMD_GPIO=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_NAND=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_BOOTP_DNS2=y -CONFIG_CMD_EXT4_WRITE=y -CONFIG_CMD_MTDPARTS=y -CONFIG_MTDIDS_DEFAULT="nand0=nand.0" -CONFIG_MTDPARTS_DEFAULT="mtdparts=nand.0:128k(NAND.SPL),128k(NAND.SPL.backup1),128k(NAND.SPL.backup2),128k(NAND.SPL.backup3),256k(NAND.u-boot-spl-os),1m(NAND.u-boot),128k(NAND.u-boot-env),128k(NAND.u-boot-env.backup1),8m(NAND.kernel),-(NAND.file-system)" -# CONFIG_ISO_PARTITION is not set -# CONFIG_EFI_PARTITION is not set -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_NAND=y -CONFIG_SYS_REDUNDAND_ENVIRONMENT=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_VERSION_VARIABLE=y -CONFIG_NET_RETRY_COUNT=10 -CONFIG_BOOTP_SEND_HOSTNAME=y -CONFIG_DM_I2C=y -CONFIG_SPL_SYS_I2C_LEGACY=y -CONFIG_SYS_I2C_OMAP24XX=y -CONFIG_MMC_OMAP_HS=y -CONFIG_MTD=y -CONFIG_MTD_RAW_NAND=y -CONFIG_SYS_NAND_BLOCK_SIZE=0x20000 -CONFIG_SYS_NAND_ONFI_DETECTION=y -CONFIG_SYS_NAND_PAGE_COUNT=0x40 -CONFIG_SYS_NAND_PAGE_SIZE=0x800 -CONFIG_SYS_NAND_OOBSIZE=0x40 -CONFIG_SYS_NAND_BUSWIDTH_16BIT=y -CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y -CONFIG_SYS_NAND_U_BOOT_OFFS=0xc0000 -CONFIG_MII=y -CONFIG_DRIVER_TI_EMAC=y -CONFIG_SYS_NS16550_SERIAL=y -CONFIG_SPI=y -# CONFIG_USE_PRIVATE_LIBGCC is not set diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig index 05b14d2451..5e81698143 100644 --- a/drivers/i2c/Kconfig +++ b/drivers/i2c/Kconfig @@ -744,7 +744,6 @@ config SYS_I2C_SPEED config SYS_I2C_BUS_MAX int "Max I2C busses" depends on ARCH_OMAP2PLUS || ARCH_SOCFPGA - default 2 if TI816X default 3 if OMAP34XX || AM33XX || AM43XX default 4 if ARCH_SOCFPGA || OMAP44XX default 5 if OMAP54XX diff --git a/drivers/net/ti/davinci_emac.c b/drivers/net/ti/davinci_emac.c index 29d2fc9b54..034877a769 100644 --- a/drivers/net/ti/davinci_emac.c +++ b/drivers/net/ti/davinci_emac.c @@ -833,9 +833,9 @@ static int davinci_emac_probe(struct udevice *dev) #endif } -#if defined(CONFIG_TI816X) || (defined(CONFIG_DRIVER_TI_EMAC_USE_RMII) && \ +#if defined(CONFIG_DRIVER_TI_EMAC_USE_RMII) && \ defined(CONFIG_MACH_DAVINCI_DA850_EVM) && \ - !defined(CONFIG_DRIVER_TI_EMAC_RMII_NO_NEGOTIATE)) + !defined(CONFIG_DRIVER_TI_EMAC_RMII_NO_NEGOTIATE) for (i = 0; i < num_phy; i++) { if (phy[i].is_phy_connected(i)) phy[i].auto_negotiate(i); diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h deleted file mode 100644 index ac6d46f917..0000000000 --- a/include/configs/ti816x_evm.h +++ /dev/null @@ -1,63 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * ti816x_evm.h - * - * Copyright (C) 2013, Adeneo Embedded - * Antoine Tenart, - */ - -#ifndef __CONFIG_TI816X_EVM_H -#define __CONFIG_TI816X_EVM_H - -#include -#include - -#define CFG_EXTRA_ENV_SETTINGS \ - DEFAULT_LINUX_BOOT_ENV - -/* Clock Defines */ -#define V_OSCK 24000000 /* Clock output from T2 */ -#define V_SCLK (V_OSCK >> 1) - -#define CFG_MAX_RAM_BANK_SIZE (2048 << 20) /* 2048MB */ -#define CFG_SYS_SDRAM_BASE 0x80000000 - -/** - * Platform/Board specific defs - */ -#define CFG_SYS_TIMERBASE 0x4802E000 - -/* - * NS16550 Configuration - */ -#define CFG_SYS_NS16550_CLK (48000000) -#define CFG_SYS_NS16550_COM1 0x48024000 /* Base EVM has UART2 */ - -/* allow overwriting serial config and ethaddr */ - - -/* - * GPMC NAND block. We support 1 device and the physical address to - * access CS0 at is 0x8000000. - */ -#define CFG_SYS_NAND_BASE 0x8000000 - -/* NAND: SPL related configs */ - -/* NAND: device related configs */ -/* NAND: driver related configs */ -#define CFG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ - 10, 11, 12, 13, 14, 15, 16, 17, \ - 18, 19, 20, 21, 22, 23, 24, 25, \ - 26, 27, 28, 29, 30, 31, 32, 33, \ - 34, 35, 36, 37, 38, 39, 40, 41, \ - 42, 43, 44, 45, 46, 47, 48, 49, \ - 50, 51, 52, 53, 54, 55, 56, 57, } - -#define CFG_SYS_NAND_ECCSIZE 512 -#define CFG_SYS_NAND_ECCBYTES 14 - -/* SPL */ -/* Defines for SPL */ - -#endif