From: Jonas Karlman <jonas@kwiboo.se>
Date: Wed, 17 May 2023 18:26:31 +0000 (+0000)
Subject: rockchip: rk3566-radxa-cm3-io: Use pinctrl for sdmmc and sdhci in SPL
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=41cb87be0653a68dd16833356c516d0080da91f6;p=u-boot.git

rockchip: rk3566-radxa-cm3-io: Use pinctrl for sdmmc and sdhci in SPL

Enable pinctrl for sdmmc and sdhci in SPL to support loading of FIT
image from SD and eMMC storage when booting from SPI NOR flash.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
---

diff --git a/arch/arm/dts/rk3566-radxa-cm3-io-u-boot.dtsi b/arch/arm/dts/rk3566-radxa-cm3-io-u-boot.dtsi
index a8c31fecaf..f91740c1c0 100644
--- a/arch/arm/dts/rk3566-radxa-cm3-io-u-boot.dtsi
+++ b/arch/arm/dts/rk3566-radxa-cm3-io-u-boot.dtsi
@@ -11,11 +11,67 @@
 	};
 };
 
+&emmc_bus8 {
+	bootph-all;
+};
+
+&emmc_clk {
+	bootph-all;
+};
+
+&emmc_cmd {
+	bootph-all;
+};
+
+&emmc_datastrobe {
+	bootph-all;
+};
+
+&pinctrl {
+	bootph-all;
+};
+
+&pcfg_pull_none {
+	bootph-all;
+};
+
+&pcfg_pull_up_drv_level_2 {
+	bootph-all;
+};
+
+&pcfg_pull_up {
+	bootph-all;
+};
+
+&sdmmc0_bus4 {
+	bootph-all;
+};
+
+&sdmmc0_clk {
+	bootph-all;
+};
+
+&sdmmc0_cmd {
+	bootph-all;
+};
+
+&sdmmc0_det {
+	bootph-all;
+};
+
+&sdmmc0_pwren {
+	bootph-all;
+};
+
 &sdhci {
 	cap-mmc-highspeed;
 	mmc-ddr-1_8v;
 };
 
+&uart2m0_xfer {
+	bootph-all;
+};
+
 &uart2 {
 	clock-frequency = <24000000>;
 	bootph-all;
diff --git a/configs/radxa-cm3-io-rk3566_defconfig b/configs/radxa-cm3-io-rk3566_defconfig
index dfaacbc883..dd1dd36a59 100644
--- a/configs/radxa-cm3-io-rk3566_defconfig
+++ b/configs/radxa-cm3-io-rk3566_defconfig
@@ -46,7 +46,7 @@ CONFIG_CMD_REGULATOR=y
 # CONFIG_SPL_DOS_PARTITION is not set
 CONFIG_SPL_OF_CONTROL=y
 CONFIG_OF_LIVE=y
-CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
 CONFIG_SPL_REGMAP=y
 CONFIG_SPL_SYSCON=y
 CONFIG_SPL_CLK=y
@@ -63,6 +63,7 @@ CONFIG_ETH_DESIGNWARE=y
 CONFIG_GMAC_ROCKCHIP=y
 CONFIG_PHY_ROCKCHIP_INNO_USB2=y
 CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y
+CONFIG_SPL_PINCTRL=y
 CONFIG_DM_PMIC=y
 CONFIG_PMIC_RK8XX=y
 CONFIG_REGULATOR_RK8XX=y