From: Sean Anderson <sean.anderson@seco.com>
Date: Tue, 23 Nov 2021 20:03:44 +0000 (-0500)
Subject: mmc: fsl_esdhc_imx: simplify esdhc_setup_data()
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=41c6a22fc2963bfc76fc2aa21f572ceb0c5a4e22;p=u-boot.git

mmc: fsl_esdhc_imx: simplify esdhc_setup_data()

[ fsl_esdhc commit 7e48a028a42c111ba38a90b86e5f57dace980fa0 ]

First, we need the waterlevel setting for PIO mode only. Secondy, both DMA
setup code is identical for both directions, except for the data pointer.
Thus, unify them.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
---

diff --git a/drivers/mmc/fsl_esdhc_imx.c b/drivers/mmc/fsl_esdhc_imx.c
index 283af35a81..6c25a77c79 100644
--- a/drivers/mmc/fsl_esdhc_imx.c
+++ b/drivers/mmc/fsl_esdhc_imx.c
@@ -279,59 +279,74 @@ static void esdhc_pio_read_write(struct fsl_esdhc_priv *priv,
 }
 #endif
 
-static int esdhc_setup_data(struct fsl_esdhc_priv *priv, struct mmc *mmc,
-			    struct mmc_data *data)
+#ifdef CONFIG_SYS_FSL_ESDHC_USE_PIO
+static void esdhc_setup_watermark_level(struct fsl_esdhc_priv *priv,
+					struct mmc_data *data)
 {
-	int timeout;
-	uint trans_bytes = data->blocksize * data->blocks;
 	struct fsl_esdhc *regs = priv->esdhc_regs;
-	uint wml_value;
-
-	wml_value = data->blocksize/4;
+	uint wml_value = data->blocksize / 4;
 
 	if (data->flags & MMC_DATA_READ) {
 		if (wml_value > WML_RD_WML_MAX)
 			wml_value = WML_RD_WML_MAX_VAL;
 
 		esdhc_clrsetbits32(&regs->wml, WML_RD_WML_MASK, wml_value);
-#ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO
-		priv->dma_addr = dma_map_single(data->dest, trans_bytes,
-						mmc_get_dma_dir(data));
-		if (upper_32_bits(priv->dma_addr))
-			printf("Cannot use 64 bit addresses with SDMA\n");
-		esdhc_write32(&regs->dsaddr, lower_32_bits(priv->dma_addr));
-#endif
 	} else {
 		if (wml_value > WML_WR_WML_MAX)
 			wml_value = WML_WR_WML_MAX_VAL;
-		if (priv->wp_enable) {
-			if ((esdhc_read32(&regs->prsstat) &
-			    PRSSTAT_WPSPL) == 0) {
-				printf("\nThe SD card is locked. Can not write to a locked card.\n\n");
-				return -ETIMEDOUT;
-			}
+
+		esdhc_clrsetbits32(&regs->wml, WML_WR_WML_MASK,
+				   wml_value << 16);
+	}
+}
+#endif
+
+static void esdhc_setup_dma(struct fsl_esdhc_priv *priv, struct mmc_data *data)
+{
+	uint trans_bytes = data->blocksize * data->blocks;
+	struct fsl_esdhc *regs = priv->esdhc_regs;
+	void *buf;
+
+	if (data->flags & MMC_DATA_WRITE)
+		buf = (void *)data->src;
+	else
+		buf = data->dest;
+
+	priv->dma_addr = dma_map_single(buf, trans_bytes,
+					mmc_get_dma_dir(data));
+	if (upper_32_bits(priv->dma_addr))
+		printf("Cannot use 64 bit addresses with SDMA\n");
+	esdhc_write32(&regs->dsaddr, lower_32_bits(priv->dma_addr));
+	esdhc_write32(&regs->blkattr, data->blocks << 16 | data->blocksize);
+}
+
+static int esdhc_setup_data(struct fsl_esdhc_priv *priv, struct mmc *mmc,
+			    struct mmc_data *data)
+{
+	int timeout;
+	bool is_write = data->flags & MMC_DATA_WRITE;
+	struct fsl_esdhc *regs = priv->esdhc_regs;
+
+	if (is_write) {
+		if (priv->wp_enable && !(esdhc_read32(&regs->prsstat) & PRSSTAT_WPSPL)) {
+			printf("Cannot write to locked SD card.\n");
+			return -EINVAL;
 		} else {
 #if CONFIG_IS_ENABLED(DM_GPIO)
 			if (dm_gpio_is_valid(&priv->wp_gpio) &&
 			    dm_gpio_get_value(&priv->wp_gpio)) {
-				printf("\nThe SD card is locked. Can not write to a locked card.\n\n");
-				return -ETIMEDOUT;
+				printf("Cannot write to locked SD card.\n");
+				return -EINVAL;
 			}
 #endif
 		}
-
-		esdhc_clrsetbits32(&regs->wml, WML_WR_WML_MASK,
-					wml_value << 16);
-#ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO
-		priv->dma_addr = dma_map_single((void *)data->src, trans_bytes,
-						mmc_get_dma_dir(data));
-		if (upper_32_bits(priv->dma_addr))
-			printf("Cannot use 64 bit addresses with SDMA\n");
-		esdhc_write32(&regs->dsaddr, lower_32_bits(priv->dma_addr));
-#endif
 	}
 
-	esdhc_write32(&regs->blkattr, data->blocks << 16 | data->blocksize);
+#ifdef CONFIG_SYS_FSL_ESDHC_USE_PIO
+	esdhc_setup_watermark_level(priv, data);
+#else
+	esdhc_setup_dma(priv, data);
+#endif
 
 	/* Calculate the timeout period for data transactions */
 	/*