From: Linus Walleij Date: Tue, 31 Jan 2023 23:16:13 +0000 (+0100) Subject: cmd: Add a SEAMA image load command X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=41a29f284cef48a86c86d038c0cd8cc1c851417e;p=u-boot.git cmd: Add a SEAMA image load command Add a command to load SEAMA (Seattle Image), a NAND flash on-flash storage format. This type of flash image is found in some D-Link routers such as DIR-645, DIR-842, DIR-859, DIR-860L, DIR-885L, DIR890L and DCH-M225, as well as in WD and NEC routers on the ath79 (MIPS), Broadcom BCM53xx, and RAMIPS platforms. This U-Boot command will read and decode a SEAMA image from raw NAND flash on any platform. As it is always using big endian format for the data decoding is always necessary on platforms such as ARM. The command is needed to read a SEAMA-encoded boot image on the D-Link DIR-890L router for boot from NAND flash in an upcoming port of U-Boot to the Broadcom Northstar (BCM4709, BCM53xx) architecture. A basic test and documentation is added as well. The test must be run on a target with NAND flash support and at least one resident SEAMA image in flash. Cc: Rafał Miłecki Signed-off-by: Linus Walleij --- diff --git a/MAINTAINERS b/MAINTAINERS index 06c4ea2ecd..b9c505d5fa 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1331,6 +1331,13 @@ F: arch/sandbox/ F: doc/arch/sandbox.rst F: include/dt-bindings/*/sandbox*.h +SEAMA +M: Linus Walleij +S: Maintained +F: cmd/seama.c +F: doc/usage/cmd/seama.rst +F: test/cmd/seama.c + SEMIHOSTING R: Sean Anderson S: Orphaned diff --git a/README b/README index edce7890c0..9cc0c981c4 100644 --- a/README +++ b/README @@ -1810,6 +1810,7 @@ sspi - SPI utility commands base - print or set address offset printenv- print environment variables pwm - control pwm channels +seama - load SEAMA NAND image setenv - set environment variables saveenv - save environment variables to persistent storage protect - enable or disable FLASH write protection diff --git a/cmd/Kconfig b/cmd/Kconfig index dc0446e02e..b50e14f70a 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -337,6 +337,12 @@ config BOOTM_RTEMS help Support booting RTEMS images via the bootm command. +config CMD_SEAMA + bool "Support read SEAMA NAND images" + depends on MTD_RAW_NAND + help + Support reading NAND Seattle Image (SEAMA) images. + config CMD_VBE bool "vbe - Verified Boot for Embedded" depends on BOOTMETH_VBE diff --git a/cmd/Makefile b/cmd/Makefile index 7b6ff73186..b03d68d5f9 100644 --- a/cmd/Makefile +++ b/cmd/Makefile @@ -156,6 +156,7 @@ obj-$(CONFIG_SANDBOX) += sb.o obj-$(CONFIG_CMD_SF) += sf.o obj-$(CONFIG_CMD_SCSI) += scsi.o disk.o obj-$(CONFIG_CMD_SHA1SUM) += sha1sum.o +obj-$(CONFIG_CMD_SEAMA) += seama.o obj-$(CONFIG_CMD_SETEXPR) += setexpr.o obj-$(CONFIG_CMD_SETEXPR_FMT) += printf.o obj-$(CONFIG_CMD_SPI) += spi.o diff --git a/cmd/seama.c b/cmd/seama.c new file mode 100644 index 0000000000..3aafb43c48 --- /dev/null +++ b/cmd/seama.c @@ -0,0 +1,158 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2023 Linus Walleij + * Support for the "SEAttle iMAge" SEAMA NAND image format + */ + +#include +#include +#include + +/* + * All SEAMA data is stored in the flash in "network endianness" + * i.e. big endian, which means that it needs to be byte-swapped + * on all little endian platforms. + * + * structure for a SEAMA entity in NAND flash: + * + * 32 bit SEAMA magic 0x5EA3A417 + * 16 bit reserved + * 16 bit metadata size (following the header) + * 32 bit image size + * 16 bytes MD5 digest of the image + * meta data + * ... image data ... + * + * Then if a new SEAMA magic follows, that is the next image. + */ + +#define SEAMA_MAGIC 0x5EA3A417 +#define SEAMA_HDR_NO_META_SZ 28 +#define SEAMA_MAX_META_SZ (1024 - SEAMA_HDR_NO_META_SZ) + +struct seama_header { + u32 magic; + u32 meta_size; + u32 image_size; + u8 md5[16]; + u8 metadata[SEAMA_MAX_META_SZ]; +}; + +static struct seama_header shdr; + +static int env_set_val(const char *varname, ulong val) +{ + int ret; + + ret = env_set_hex(varname, val); + if (ret) + printf("Failed to %s env var\n", varname); + + return ret; +} + +static int do_seama_load_image(struct cmd_tbl *cmdtp, int flag, int argc, + char *const argv[]) +{ + struct mtd_info *mtd; + uintptr_t load_addr; + unsigned long image_index; + u32 len; + size_t readsz; + int ret; + u32 *start; + u32 *offset; + u32 *end; + u32 tmp; + + if (argc < 2 || argc > 3) + return CMD_RET_USAGE; + + load_addr = hextoul(argv[1], NULL); + if (!load_addr) { + printf("Invalid load address\n"); + return CMD_RET_USAGE; + } + + /* Can be 0 for first image */ + image_index = hextoul(argv[2], NULL); + + /* We only support one NAND, the first one */ + nand_curr_device = 0; + mtd = get_nand_dev_by_index(0); + if (!mtd) { + printf("NAND Device 0 not available\n"); + return CMD_RET_FAILURE; + } + +#ifdef CONFIG_SYS_NAND_SELECT_DEVICE + board_nand_select_device(mtd_to_nand(mtd), 0); +#endif + + printf("Loading SEAMA image %lu from %s\n", image_index, mtd->name); + + readsz = sizeof(shdr); + offset = 0; + ret = nand_read_skip_bad(mtd, 0, &readsz, NULL, mtd->size, + (u_char *)&shdr); + if (ret) { + printf("Read error reading SEAMA header\n"); + return CMD_RET_FAILURE; + } + + if (shdr.magic != SEAMA_MAGIC) { + printf("Invalid SEAMA image magic: 0x%08x\n", shdr.magic); + return CMD_RET_FAILURE; + } + + /* Only the lower 16 bits are valid */ + shdr.meta_size &= 0xFFFF; + + if (env_set_val("seama_image_size", 0)) + return CMD_RET_FAILURE; + + printf("SEMA IMAGE:\n"); + printf(" metadata size %d\n", shdr.meta_size); + printf(" image size %d\n", shdr.image_size); + printf(" checksum %02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x\n", + shdr.md5[0], shdr.md5[1], shdr.md5[2], shdr.md5[3], + shdr.md5[4], shdr.md5[5], shdr.md5[6], shdr.md5[7], + shdr.md5[8], shdr.md5[9], shdr.md5[10], shdr.md5[11], + shdr.md5[12], shdr.md5[13], shdr.md5[14], shdr.md5[15]); + + /* TODO: handle metadata if needed */ + + len = shdr.image_size; + if (env_set_val("seama_image_size", len)) + return CMD_RET_FAILURE; + + /* We need to include the header (read full pages) */ + readsz = shdr.image_size + SEAMA_HDR_NO_META_SZ + shdr.meta_size; + ret = nand_read_skip_bad(mtd, 0, &readsz, NULL, mtd->size, + (u_char *)load_addr); + if (ret) { + printf("Read error reading SEAMA main image\n"); + return CMD_RET_FAILURE; + } + + /* We use a temporary variable tmp to avoid to hairy casts */ + start = (u32 *)load_addr; + tmp = (u32)start; + tmp += SEAMA_HDR_NO_META_SZ + shdr.meta_size; + offset = (u32 *)tmp; + tmp += shdr.image_size; + end = (u32 *)tmp; + + printf("Decoding SEAMA image 0x%08x..0x%08x to 0x%08x\n", + (u32)offset, (u32)end, (u32)start); + for (; start < end; start++, offset++) + *start = be32_to_cpu(*offset); + + return CMD_RET_SUCCESS; +} + +U_BOOT_CMD + (seama, 3, 1, do_seama_load_image, + "Load the SEAMA image and sets envs", + "seama \n" +); diff --git a/doc/usage/cmd/seama.rst b/doc/usage/cmd/seama.rst new file mode 100644 index 0000000000..356c00a723 --- /dev/null +++ b/doc/usage/cmd/seama.rst @@ -0,0 +1,60 @@ +.. SPDX-License-Identifier: GPL-2.0+: + +seama command +============= + +Synopsis +-------- + +:: + + seama + +Description +----------- + +The seama command is used to load and decode SEAttle iMAges from NAND +flash to memory. + +This type of flash image is found in some D-Link routers such as +DIR-645, DIR-842, DIR-859, DIR-860L, DIR-885L, DIR890L and DCH-M225, +as well as in WD and NEC routers on the ath79 (MIPS), Broadcom +BCM53xx, and RAMIPS platforms. + +This U-Boot command will read and decode a SEAMA image from raw NAND +flash on any platform. As it is always using big endian format for +the data decoding is always necessary on platforms such as ARM. + +dst_addr + destination address of the byte stream to be loaded + +index + the image index (0, 1, 2..) can be omitted + +Example +------- + +:: + + => seama 0x01000000 + Loading SEAMA image 0 from nand0 + SEMA IMAGE: + metadata size 36 + image size 8781764 + checksum 054859cfb1487b59befda98824e09dd6 + Decoding SEAMA image 0x01000040..0x01860004 to 0x01000000 + + +Configuration +------------- + +The command is available if CONFIG_CMD_SEAMA=y. + +Return value +------------ + +The return value $? is set 0 (true) if the loading is succefull, and +is set to 1 (false) in case of error. + +The environment variable $seama_image_size is set to the size of the +loaded SEAMA image. diff --git a/doc/usage/index.rst b/doc/usage/index.rst index 3804046835..13e6939b38 100644 --- a/doc/usage/index.rst +++ b/doc/usage/index.rst @@ -75,6 +75,7 @@ Shell commands cmd/sbi cmd/sf cmd/scp03 + cmd/seama cmd/setexpr cmd/size cmd/sleep diff --git a/include/test/suites.h b/include/test/suites.h index 9ce49cbb03..7c4960c004 100644 --- a/include/test/suites.h +++ b/include/test/suites.h @@ -49,6 +49,7 @@ int do_ut_optee(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]); int do_ut_overlay(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]); int do_ut_print(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]); +int do_ut_seama(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]); int do_ut_setexpr(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]); int do_ut_str(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]); diff --git a/test/cmd/Makefile b/test/cmd/Makefile index 09e410ec30..2ffde8703a 100644 --- a/test/cmd/Makefile +++ b/test/cmd/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_CMD_LOADM) += loadm.o obj-$(CONFIG_CMD_MEM_SEARCH) += mem_search.o obj-$(CONFIG_CMD_PINMUX) += pinmux.o obj-$(CONFIG_CMD_PWM) += pwm.o +obj-$(CONFIG_CMD_SEAMA) += seama.o ifdef CONFIG_SANDBOX obj-$(CONFIG_CMD_SETEXPR) += setexpr.o endif diff --git a/test/cmd/seama.c b/test/cmd/seama.c new file mode 100644 index 0000000000..b1b56930c6 --- /dev/null +++ b/test/cmd/seama.c @@ -0,0 +1,71 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Executes tests for SEAMA (SEAttle iMAge) command + * + * Copyright (C) 2021 Linus Walleij + */ + +#include +#include +#include +#include +#include +#include + +#define SEAMA_TEST(_name, _flags) UNIT_TEST(_name, _flags, seama_test) + +static int seama_test_noargs(struct unit_test_state *uts) +{ + /* Test that 'seama' with no arguments fails gracefully */ + console_record_reset(); + run_command("seama", 0); + ut_assert_nextlinen("seama - Load the SEAMA image and sets envs"); + ut_assert_skipline(); + ut_assert_skipline(); + ut_assert_skipline(); + ut_assert_skipline(); + ut_assert_console_end(); + return 0; +} +SEAMA_TEST(seama_test_noargs, UT_TESTF_CONSOLE_REC); + +static int seama_test_addr(struct unit_test_state *uts) +{ + /* Test that loads SEAMA image 0 to address 0x01000000 */ + console_record_reset(); + run_command("seama 0x01000000", 0); + ut_assert_nextlinen("Loading SEAMA image 0 from nand0"); + ut_assert_nextlinen("SEMA IMAGE:"); + ut_assert_nextlinen(" metadata size "); + ut_assert_nextlinen(" image size "); + ut_assert_nextlinen(" checksum "); + ut_assert_nextlinen("Decoding SEAMA image 0x01000040.."); + ut_assert_console_end(); + return 0; +} +SEAMA_TEST(seama_test_addr, UT_TESTF_CONSOLE_REC); + +static int seama_test_index(struct unit_test_state *uts) +{ + /* Test that loads SEAMA image 0 exlicitly specified */ + console_record_reset(); + run_command("seama 0x01000000 0", 0); + ut_assert_nextlinen("Loading SEAMA image 0 from nand0"); + ut_assert_nextlinen("SEMA IMAGE:"); + ut_assert_nextlinen(" metadata size "); + ut_assert_nextlinen(" image size "); + ut_assert_nextlinen(" checksum "); + ut_assert_nextlinen("Decoding SEAMA image 0x01000040.."); + ut_assert_console_end(); + return 0; +} +SEAMA_TEST(seama_test_index, UT_TESTF_CONSOLE_REC); + +int do_ut_seama(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) +{ + struct unit_test *tests = UNIT_TEST_SUITE_START(seama_test); + const int n_ents = UNIT_TEST_SUITE_COUNT(seama_test); + + return cmd_ut_category("seama", "seama_test_", tests, n_ents, argc, + argv); +} diff --git a/test/cmd_ut.c b/test/cmd_ut.c index 1713d0d1c8..409c22bfd2 100644 --- a/test/cmd_ut.c +++ b/test/cmd_ut.c @@ -110,6 +110,9 @@ static struct cmd_tbl cmd_ut_sub[] = { #ifdef CONFIG_CMD_LOADM U_BOOT_CMD_MKENT(loadm, CONFIG_SYS_MAXARGS, 1, do_ut_loadm, "", ""), #endif +#ifdef CONFIG_CMD_SEAMA + U_BOOT_CMD_MKENT(seama, CONFIG_SYS_MAXARGS, 1, do_ut_seama, "", ""), +#endif }; static int do_ut_all(struct cmd_tbl *cmdtp, int flag, int argc, @@ -212,6 +215,9 @@ static char ut_help_text[] = #ifdef CONFIG_SANDBOX "\nstr - basic test of string functions" #endif +#ifdef CONFIG_CMD_SEAMA + "\nseama - seama command parameters loading and decoding" +#endif #ifdef CONFIG_UT_TIME "\ntime - very basic test of time functions" #endif