From: Jonas Karlman Date: Wed, 1 May 2024 16:22:36 +0000 (+0000) Subject: rockchip: rk3399-rockpro64: Sync DT from v6.8 and update defconfig X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=40bb3089bc83299f96312570992f0a817212dd09;p=u-boot.git rockchip: rk3399-rockpro64: Sync DT from v6.8 and update defconfig Sync rk3399-rockpro64 device tree from Linux kernel v6.8. Add SF_DEFAULT_SPEED=10000000 and SPI_FLASH_SFDP_SUPPORT=y to improve support for booting from SPI flash. Remove USE_PREBOOT=y to speed up booting, standard boot will init USB after faster boot media has been evaluated. Add CMD_POWEROFF=y to support poweroff using cmdline and power on using the pwr button on the board. Add PHY_REALTEK=y and DM_ETH_PHY=y to support ethernet PHY. Remove SPL_TINY_MEMSET=y to use full memset in SPL. Signed-off-by: Jonas Karlman Reviewed-by: Dragan Simic Reviewed-by: Kever Yang --- diff --git a/arch/arm/dts/rk3399-rockpro64.dtsi b/arch/arm/dts/rk3399-rockpro64.dtsi index 6bff8db7d3..f30b82a10c 100644 --- a/arch/arm/dts/rk3399-rockpro64.dtsi +++ b/arch/arm/dts/rk3399-rockpro64.dtsi @@ -11,6 +11,7 @@ / { aliases { + ethernet0 = &gmac; mmc0 = &sdio0; mmc1 = &sdmmc; mmc2 = &sdhci; @@ -20,6 +21,15 @@ stdout-path = "serial2:1500000n8"; }; + /* enable for panel backlight support */ + backlight: backlight { + compatible = "pwm-backlight"; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <5>; + pwms = <&pwm0 0 1000000 0>; + status = "disabled"; + }; + clkin_gmac: external-gmac-clock { compatible = "fixed-clock"; clock-frequency = <125000000>; @@ -33,7 +43,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pwrbtn>; - power { + key-power { debounce-interval = <100>; gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; label = "GPIO Key Power"; @@ -69,6 +79,7 @@ fan: pwm-fan { compatible = "pwm-fan"; + cooling-levels = <0 100 150 200 255>; #cooling-cells = <2>; fan-supply = <&vcc12v_dcin>; pwms = <&pwm1 0 50000 0>; @@ -106,6 +117,14 @@ }; }; + avdd: avdd-regulator { + compatible = "regulator-fixed"; + regulator-name = "avdd"; + regulator-min-microvolt = <11000000>; + regulator-max-microvolt = <11000000>; + vin-supply = <&vcc3v3_s0>; + }; + vcc12v_dcin: vcc12v-dcin { compatible = "regulator-fixed"; regulator-name = "vcc12v_dcin"; @@ -212,12 +231,12 @@ vdd_log: vdd-log { compatible = "pwm-regulator"; pwms = <&pwm2 0 25000 1>; + pwm-supply = <&vcc5v0_sys>; regulator-name = "vdd_log"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1700000>; - vin-supply = <&vcc5v0_sys>; }; }; @@ -245,6 +264,34 @@ cpu-supply = <&vdd_cpu_b>; }; +&cpu_thermal { + trips { + cpu_warm: cpu_warm { + temperature = <55000>; + hysteresis = <2000>; + type = "active"; + }; + + cpu_hot: cpu_hot { + temperature = <65000>; + hysteresis = <2000>; + type = "active"; + }; + }; + + cooling-maps { + map2 { + trip = <&cpu_warm>; + cooling-device = <&fan THERMAL_NO_LIMIT 1>; + }; + + map3 { + trip = <&cpu_hot>; + cooling-device = <&fan 2 THERMAL_NO_LIMIT>; + }; + }; +}; + &emmc_phy { status = "okay"; }; @@ -371,8 +418,6 @@ vcc3v0_touch: LDO_REG2 { regulator-name = "vcc3v0_touch"; - regulator-always-on; - regulator-boot-on; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-state-mem { @@ -461,8 +506,6 @@ vcc3v3_s0: SWITCH_REG2 { regulator-name = "vcc3v3_s0"; - regulator-always-on; - regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; }; @@ -536,6 +579,19 @@ vbus-supply = <&vcc5v0_typec>; status = "okay"; }; + + /* enable for pine64 touch screen support */ + touch: touchscreen@5d { + compatible = "goodix,gt911"; + reg = <0x5d>; + interrupt-parent = <&gpio4>; + interrupts = ; + AVDD28-supply = <&vcc3v0_touch>; + VDDIO-supply = <&vcc3v0_touch>; + irq-gpios = <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>; + status = "disabled"; + }; }; &i2s0 { @@ -571,6 +627,36 @@ gpio1830-supply = <&vcc_3v0>; }; +/* enable for pine64 panel display support */ +&mipi_dsi { + clock-master; + status = "disabled"; + + ports { + mipi_out: port@1 { + reg = <1>; + + mipi_out_panel: endpoint { + remote-endpoint = <&mipi_in_panel>; + }; + }; + }; + + mipi_panel: panel@0 { + compatible = "feiyang,fy07024di26a30d"; + reg = <0>; + avdd-supply = <&avdd>; + backlight = <&backlight>; + dvdd-supply = <&vcc3v3_s0>; + + port { + mipi_in_panel: endpoint { + remote-endpoint = <&mipi_out_panel>; + }; + }; + }; +}; + &pcie0 { ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; num-lanes = <4>; diff --git a/configs/rockpro64-rk3399_defconfig b/configs/rockpro64-rk3399_defconfig index 173f8f7502..4e1af37a15 100644 --- a/configs/rockpro64-rk3399_defconfig +++ b/configs/rockpro64-rk3399_defconfig @@ -4,6 +4,7 @@ CONFIG_COUNTER_FREQUENCY=24000000 CONFIG_ARCH_ROCKCHIP=y CONFIG_SPL_GPIO=y CONFIG_NR_DRAM_BANKS=1 +CONFIG_SF_DEFAULT_SPEED=10000000 CONFIG_ENV_SIZE=0x8000 CONFIG_ENV_OFFSET=0x3F8000 CONFIG_DEFAULT_DEVICE_TREE="rk3399-rockpro64" @@ -20,7 +21,6 @@ CONFIG_PCI=y CONFIG_DEBUG_UART=y CONFIG_BOOTSTAGE=y CONFIG_BOOTSTAGE_REPORT=y -CONFIG_USE_PREBOOT=y CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-rockpro64.dtb" CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_SPL_MAX_SIZE=0x40000 @@ -34,6 +34,7 @@ CONFIG_CMD_BOOTZ=y CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y CONFIG_CMD_PCI=y +CONFIG_CMD_POWEROFF=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TIME=y @@ -57,7 +58,10 @@ CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_SDMA=y CONFIG_MMC_SDHCI_ROCKCHIP=y CONFIG_SF_DEFAULT_BUS=1 +CONFIG_SPI_FLASH_SFDP_SUPPORT=y CONFIG_SPI_FLASH_GIGADEVICE=y +CONFIG_PHY_REALTEK=y +CONFIG_DM_ETH_PHY=y CONFIG_ETH_DESIGNWARE=y CONFIG_GMAC_ROCKCHIP=y CONFIG_NVME_PCI=y @@ -96,5 +100,4 @@ CONFIG_VIDEO=y CONFIG_DISPLAY=y CONFIG_VIDEO_ROCKCHIP=y CONFIG_DISPLAY_ROCKCHIP_HDMI=y -CONFIG_SPL_TINY_MEMSET=y CONFIG_ERRNO_STR=y