From: Taras Kondratiuk <taras@ti.com>
Date: Tue, 6 Aug 2013 12:18:49 +0000 (+0300)
Subject: ARM: OMAP4470: Add voltage and dpll data
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=40aadf9201b6f9ee840ce09c06c3eebd26c67386;p=u-boot.git

ARM: OMAP4470: Add voltage and dpll data

OMAP4470 reference design uses TWL6032 PMIC
with a following connection scheme:
  VDD_CORE = TWL6032 SMPS2
  VDD_MPU  = TWL6032 SMPS1
  VDD_IVA  = TWL6032 SMPS5

Set voltage and frequency values according to
OMAP4470 Data Manual Operating Condition Addendum v0.7

Signed-off-by: Taras Kondratiuk <taras@ti.com>
---

diff --git a/arch/arm/cpu/armv7/omap4/hw_data.c b/arch/arm/cpu/armv7/omap4/hw_data.c
index 310df5a6e2..6a225c8cb2 100644
--- a/arch/arm/cpu/armv7/omap4/hw_data.c
+++ b/arch/arm/cpu/armv7/omap4/hw_data.c
@@ -50,6 +50,7 @@ static const struct dpll_params mpu_dpll_params_1400mhz[NUM_SYS_CLKS] = {
 /*
  * dpll locked at 1600 MHz - MPU clk at 800 MHz(OPP Turbo 4430)
  * OMAP4430 OPP_TURBO frequency
+ * OMAP4470 OPP_NOM frequency
  */
 static const struct dpll_params mpu_dpll_params_1600mhz[NUM_SYS_CLKS] = {
 	{200, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
@@ -76,6 +77,7 @@ static const struct dpll_params mpu_dpll_params_1200mhz[NUM_SYS_CLKS] = {
 };
 
 /* OMAP4460 OPP_NOM frequency */
+/* OMAP4470 OPP_NOM (Low Power) frequency */
 static const struct dpll_params core_dpll_params_1600mhz[NUM_SYS_CLKS] = {
 	{200, 2, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1},	/* 12 MHz   */
 	{800, 12, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1},	/* 13 MHz   */
@@ -198,6 +200,20 @@ struct dplls omap4460_dplls = {
 	.ddr = NULL
 };
 
+struct dplls omap4470_dplls = {
+	.mpu = mpu_dpll_params_1600mhz,
+	.core = core_dpll_params_1600mhz,
+	.per = per_dpll_params_1536mhz,
+	.iva = iva_dpll_params_1862mhz,
+#ifdef CONFIG_SYS_OMAP_ABE_SYSCK
+	.abe = abe_dpll_params_sysclk_196608khz,
+#else
+	.abe = &abe_dpll_params_32k_196608khz,
+#endif
+	.usb = usb_dpll_params_1920mhz,
+	.ddr = NULL
+};
+
 struct pmic_data twl6030_4430es1 = {
 	.base_offset = PHOENIX_SMPS_BASE_VOLT_STD_MODE_UV,
 	.step = 12660, /* 12.66 mV represented in uV */
@@ -208,6 +224,7 @@ struct pmic_data twl6030_4430es1 = {
 	.pmic_write	= omap_vc_bypass_send_value,
 };
 
+/* twl6030 struct is used for TWL6030 and TWL6032 PMIC */
 struct pmic_data twl6030 = {
 	.base_offset = PHOENIX_SMPS_BASE_VOLT_STD_MODE_WITH_OFFSET_UV,
 	.step = 12660, /* 12.66 mV represented in uV */
@@ -271,6 +288,20 @@ struct vcores_data omap4460_volts = {
 	.mm.pmic = &twl6030,
 };
 
+struct vcores_data omap4470_volts = {
+	.mpu.value = 1200,
+	.mpu.addr = SMPS_REG_ADDR_SMPS1,
+	.mpu.pmic = &twl6030,
+
+	.core.value = 1126,
+	.core.addr = SMPS_REG_ADDR_SMPS1,
+	.core.pmic = &twl6030,
+
+	.mm.value = 1137,
+	.mm.addr = SMPS_REG_ADDR_SMPS1,
+	.mm.pmic = &twl6030,
+};
+
 /*
  * Enable essential clock domains, modules and
  * do some additional special settings needed
@@ -476,6 +507,11 @@ void hw_data_init(void)
 	*omap_vcores = &omap4460_volts;
 	break;
 
+	case OMAP4470_ES1_0:
+	*dplls_data = &omap4470_dplls;
+	*omap_vcores = &omap4470_volts;
+	break;
+
 	default:
 		printf("\n INVALID OMAP REVISION ");
 	}
diff --git a/arch/arm/include/asm/arch-omap4/clock.h b/arch/arm/include/asm/arch-omap4/clock.h
index b2e03d6e1e..f3a682a197 100644
--- a/arch/arm/include/asm/arch-omap4/clock.h
+++ b/arch/arm/include/asm/arch-omap4/clock.h
@@ -149,11 +149,16 @@
 /* PRM_VC_VAL_BYPASS */
 #define PRM_VC_I2C_CHANNEL_FREQ_KHZ	400
 
-/* SMPS */
+/* PMIC */
 #define SMPS_I2C_SLAVE_ADDR	0x12
+/* TWL6030 SMPS */
 #define SMPS_REG_ADDR_VCORE1	0x55
 #define SMPS_REG_ADDR_VCORE2	0x5B
 #define SMPS_REG_ADDR_VCORE3	0x61
+/* TWL6032 SMPS */
+#define SMPS_REG_ADDR_SMPS1	0x55
+#define SMPS_REG_ADDR_SMPS2	0x5B
+#define SMPS_REG_ADDR_SMPS5	0x49
 
 #define PHOENIX_SMPS_BASE_VOLT_STD_MODE_UV		607700
 #define PHOENIX_SMPS_BASE_VOLT_STD_MODE_WITH_OFFSET_UV	709000