From: Jagan Teki Date: Mon, 13 Jul 2020 20:06:34 +0000 (+0530) Subject: ram: rk3399: Mark existing prints via RAM_ROCKCHIP_DEBUG X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=40794c825f17881180852d4d010cacb3b45ce08e;p=u-boot.git ram: rk3399: Mark existing prints via RAM_ROCKCHIP_DEBUG Right now all these debug statements are printing on the console to make sure proper dram initialization happens.   Mark them into RAM_ROCKCHIP_DEBUG would be more meaningful and work like before since the RAM_ROCKCHIP_DEBUG is by default yet. No functionality changes. Signed-off-by: Jagan Teki Reviewed-by: Kever Yang --- diff --git a/drivers/ram/rockchip/sdram_rk3399.c b/drivers/ram/rockchip/sdram_rk3399.c index 73d437347d..530c8a2f40 100644 --- a/drivers/ram/rockchip/sdram_rk3399.c +++ b/drivers/ram/rockchip/sdram_rk3399.c @@ -2551,8 +2551,10 @@ static int lpddr4_set_rate(struct dram_info *dram, lpddr4_set_ctl(dram, params, ctl_fn, dfs_cfgs_lpddr4[ctl_fn].base.ddr_freq); - printf("%s: change freq to %d mhz %d, %d\n", __func__, - dfs_cfgs_lpddr4[ctl_fn].base.ddr_freq, ctl_fn, phy_fn); + if (IS_ENABLED(CONFIG_RAM_ROCKCHIP_DEBUG)) + printf("%s: change freq to %d mhz %d, %d\n", __func__, + dfs_cfgs_lpddr4[ctl_fn].base.ddr_freq, + ctl_fn, phy_fn); } return 0; @@ -2966,8 +2968,10 @@ static int sdram_init(struct dram_info *dram, params->base.num_channels++; } - printf("Channel "); - printf(channel ? "1: " : "0: "); + if (IS_ENABLED(CONFIG_RAM_ROCKCHIP_DEBUG)) { + printf("Channel "); + printf(channel ? "1: " : "0: "); + } if (channel == 0) set_ddr_stride(dram->pmusgrf, 0x17);