From: Hans de Goede Date: Wed, 27 Jul 2016 15:31:17 +0000 (+0200) Subject: net: sun8i_emac: Fix DMA alignment issues with the rx / tx buffers X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=4069437dfbb2f70b92a84af7ce2d5cfba27247b9;p=u-boot.git net: sun8i_emac: Fix DMA alignment issues with the rx / tx buffers This fixes the following CACHE warnings when using sun8i_emac: => dhcp BOOTP broadcast 1 BOOTP broadcast 2 CACHE: Misaligned operation at range [7bf594a8, 7bf59628] BOOTP broadcast 3 CACHE: Misaligned operation at range [7bf59c90, 7bf59e10] CACHE: Misaligned operation at range [7bf5a478, 7bf5a5f8] DHCP client bound to address 10.42.43.80 (1009 ms) Note this commit also changes the max rx size from 2024 to 2044, matching what the kernel driver uses. Cc: Chen-Yu Tsai Cc: Corentin LABBE Cc: Amit Singh Tomar Signed-off-by: Hans de Goede Acked-by: Ian Campbell --- diff --git a/drivers/net/sun8i_emac.c b/drivers/net/sun8i_emac.c index 7c088c311d..4c149e1bdf 100644 --- a/drivers/net/sun8i_emac.c +++ b/drivers/net/sun8i_emac.c @@ -32,7 +32,14 @@ #define CONFIG_TX_DESCR_NUM 32 #define CONFIG_RX_DESCR_NUM 32 -#define CONFIG_ETH_BUFSIZE 2024 +#define CONFIG_ETH_BUFSIZE 2048 /* Note must be dma aligned */ + +/* + * The datasheet says that each descriptor can transfers up to 4096 bytes + * But later, the register documentation reduces that value to 2048, + * using 2048 cause strange behaviours and even BSP driver use 2047 + */ +#define CONFIG_ETH_RXSIZE 2044 /* Note must fit in ETH_BUFSIZE */ #define TX_TOTAL_BUFSIZE (CONFIG_ETH_BUFSIZE * CONFIG_TX_DESCR_NUM) #define RX_TOTAL_BUFSIZE (CONFIG_ETH_BUFSIZE * CONFIG_RX_DESCR_NUM) @@ -324,7 +331,7 @@ static void rx_descs_init(struct emac_eth_dev *priv) desc_p->buf_addr = (uintptr_t)&rxbuffs[idx * CONFIG_ETH_BUFSIZE] ; desc_p->next = (uintptr_t)&desc_table_p[idx + 1]; - desc_p->st |= CONFIG_ETH_BUFSIZE; + desc_p->st |= CONFIG_ETH_RXSIZE; desc_p->status = BIT(31); } @@ -506,7 +513,7 @@ static int _sun8i_eth_recv(struct emac_eth_dev *priv, uchar **packetp) roundup(data_end, ARCH_DMA_MINALIGN)); if (good_packet) { - if (length > CONFIG_ETH_BUFSIZE) { + if (length > CONFIG_ETH_RXSIZE) { printf("Received packet is too big (len=%d)\n", length); return -EMSGSIZE;