From: Bin Meng Date: Wed, 17 Dec 2014 07:50:41 +0000 (+0800) Subject: x86: Add crownbay defconfig and config.h X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=405d8205d76b57184e24eae573c7dd61474b56e0;p=u-boot.git x86: Add crownbay defconfig and config.h Signed-off-by: Bin Meng Acked-by: Simon Glass --- diff --git a/configs/crownbay_defconfig b/configs/crownbay_defconfig new file mode 100644 index 0000000000..ce905539f9 --- /dev/null +++ b/configs/crownbay_defconfig @@ -0,0 +1,6 @@ +CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0xfff00000" +CONFIG_X86=y +CONFIG_TARGET_CROWNBAY=y +CONFIG_OF_CONTROL=y +CONFIG_OF_SEPARATE=y +CONFIG_DEFAULT_DEVICE_TREE="crownbay" diff --git a/include/configs/crownbay.h b/include/configs/crownbay.h new file mode 100644 index 0000000000..2314e62a87 --- /dev/null +++ b/include/configs/crownbay.h @@ -0,0 +1,52 @@ +/* + * Copyright (C) 2014, Bin Meng + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* + * board/config.h - configuration options, board specific + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include + +#define CONFIG_SYS_MONITOR_LEN (1 << 20) +#define CONFIG_SYS_X86_START16 0xfffff800 +#define CONFIG_BOARD_EARLY_INIT_F + +#define CONFIG_X86_RESET_VECTOR +#define CONFIG_NR_DRAM_BANKS 1 + +#define CONFIG_COREBOOT_SERIAL +#define CONFIG_SMSC_LPC47M + +#define CONFIG_PCI_MEM_BUS 0x40000000 +#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS +#define CONFIG_PCI_MEM_SIZE 0x80000000 + +#define CONFIG_PCI_PREF_BUS 0xc0000000 +#define CONFIG_PCI_PREF_PHYS CONFIG_PCI_PREF_BUS +#define CONFIG_PCI_PREF_SIZE 0x20000000 + +#define CONFIG_PCI_IO_BUS 0x2000 +#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS +#define CONFIG_PCI_IO_SIZE 0xe000 + +#define CONFIG_SYS_EARLY_PCI_INIT +#define CONFIG_PCI_PNP + +#define CONFIG_STD_DEVICES_SETTINGS "stdin=serial\0" \ + "stdout=serial\0" \ + "stderr=serial\0" + +#define CONFIG_SCSI_DEV_LIST \ + {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TCF_SATA} + +/* Video is not supported */ +#undef CONFIG_VIDEO +#undef CONFIG_CFB_CONSOLE + +#endif /* __CONFIG_H */