From: Matthias Kaehlcke Date: Thu, 16 Jul 2009 19:19:29 +0000 (+0200) Subject: KB9202: Add NAND support X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=403ce1f759b5acec8514cd7e10ce76704fed519c;p=u-boot.git KB9202: Add NAND support Add KB9202 NAND driver Signed-off-by: Matthias Kaehlcke Signed-off-by: Scott Wood --- diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index 89ccec2802..55eee3c9ba 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -38,6 +38,7 @@ COBJS-$(CONFIG_DRIVER_NAND_BFIN) += bfin_nand.o COBJS-$(CONFIG_NAND_DAVINCI) += davinci_nand.o COBJS-$(CONFIG_NAND_FSL_ELBC) += fsl_elbc_nand.o COBJS-$(CONFIG_NAND_FSL_UPM) += fsl_upm.o +COBJS-$(CONFIG_NAND_KB9202) += kb9202_nand.o COBJS-$(CONFIG_NAND_KIRKWOOD) += kirkwood_nand.o COBJS-$(CONFIG_NAND_MPC5121_NFC) += mpc5121_nfc.o COBJS-$(CONFIG_NAND_NDFC) += ndfc.o diff --git a/drivers/mtd/nand/kb9202_nand.c b/drivers/mtd/nand/kb9202_nand.c new file mode 100644 index 0000000000..b8f46fa4ba --- /dev/null +++ b/drivers/mtd/nand/kb9202_nand.c @@ -0,0 +1,150 @@ +/* + * (C) Copyright 2006 + * KwikByte + * + * (C) Copyright 2009 + * Matthias Kaehlcke + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include + +#include + +/* + * hardware specific access to control-lines + */ + +#define MASK_ALE (1 << 22) /* our ALE is A22 */ +#define MASK_CLE (1 << 21) /* our CLE is A21 */ + +#define KB9202_NAND_NCE (1 << 28) /* EN* on D28 */ +#define KB9202_NAND_BUSY (1 << 29) /* RB* on D29 */ + +#define KB9202_SMC2_NWS (1 << 2) +#define KB9202_SMC2_TDF (1 << 8) +#define KB9202_SMC2_RWSETUP (1 << 24) +#define KB9202_SMC2_RWHOLD (1 << 29) + +/* + * Board-specific function to access device control signals + */ +static void kb9202_nand_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + + if (ctrl & NAND_CTRL_CHANGE) { + ulong IO_ADDR_W = (ulong) this->IO_ADDR_W; + + /* clear ALE and CLE bits */ + IO_ADDR_W &= ~(MASK_ALE | MASK_CLE); + + if (ctrl & NAND_CLE) + IO_ADDR_W |= MASK_CLE; + + if (ctrl & NAND_ALE) + IO_ADDR_W |= MASK_ALE; + + this->IO_ADDR_W = (void *) IO_ADDR_W; + + if (ctrl & NAND_NCE) + writel(KB9202_NAND_NCE, AT91C_PIOC_CODR); + else + writel(KB9202_NAND_NCE, AT91C_PIOC_SODR); + } + + if (cmd != NAND_CMD_NONE) + writeb(cmd, this->IO_ADDR_W); +} + + +/* + * Board-specific function to access the device ready signal. + */ +static int kb9202_nand_ready(struct mtd_info *mtd) +{ + return readl(AT91C_PIOC_PDSR) & KB9202_NAND_BUSY; +} + + +/* + * Board-specific NAND init. Copied from include/linux/mtd/nand.h for reference. + * + * struct nand_chip - NAND Private Flash Chip Data + * @IO_ADDR_R: [BOARDSPECIFIC] address to read the 8 I/O lines of the flash device + * @IO_ADDR_W: [BOARDSPECIFIC] address to write the 8 I/O lines of the flash device + * @hwcontrol: [BOARDSPECIFIC] hardwarespecific function for accesing control-lines + * @dev_ready: [BOARDSPECIFIC] hardwarespecific function for accesing device ready/busy line + * If set to NULL no access to ready/busy is available and the ready/busy information + * is read from the chip status register + * @enable_hwecc: [BOARDSPECIFIC] function to enable (reset) hardware ecc generator. Must only + * be provided if a hardware ECC is available + * @eccmode: [BOARDSPECIFIC] mode of ecc, see defines + * @chip_delay: [BOARDSPECIFIC] chip dependent delay for transfering data from array to read regs (tR) + * @options: [BOARDSPECIFIC] various chip options. They can partly be set to inform nand_scan about + * special functionality. See the defines for further explanation +*/ +/* + * This routine initializes controller and GPIOs. + */ +int board_nand_init(struct nand_chip *nand) +{ + unsigned int value; + + nand->ecc.mode = NAND_ECC_SOFT; + nand->cmd_ctrl = kb9202_nand_hwcontrol; + nand->dev_ready = kb9202_nand_ready; + + /* in case running outside of bootloader */ + writel(1 << AT91C_ID_PIOC, AT91C_PMC_PCER); + + /* setup nand flash access (allow ample margin) */ + /* 4 wait states, 1 setup, 1 hold, 1 float for 8-bit device */ + writel(AT91C_SMC2_WSEN | KB9202_SMC2_NWS | KB9202_SMC2_TDF | + AT91C_SMC2_DBW_8 | KB9202_SMC2_RWSETUP | KB9202_SMC2_RWHOLD, + AT91C_SMC_CSR3); + + /* enable internal NAND controller */ + value = readl(AT91C_EBI_CSA); + value |= AT91C_EBI_CS3A_SMC_SmartMedia; + writel(value, AT91C_EBI_CSA); + + /* enable SMOE/SMWE */ + writel(AT91C_PC1_BFRDY_SMOE | AT91C_PC3_BFBAA_SMWE, AT91C_PIOC_ASR); + writel(AT91C_PC1_BFRDY_SMOE | AT91C_PC3_BFBAA_SMWE, AT91C_PIOC_PDR); + writel(AT91C_PC1_BFRDY_SMOE | AT91C_PC3_BFBAA_SMWE, AT91C_PIOC_OER); + + /* set NCE to high */ + writel(KB9202_NAND_NCE, AT91C_PIOC_SODR); + + /* disable output on pin connected to the busy line of the NAND */ + writel(KB9202_NAND_BUSY, AT91C_PIOC_ODR); + + /* enable the PIO to control NCE and BUSY */ + writel(KB9202_NAND_NCE | KB9202_NAND_BUSY, AT91C_PIOC_PER); + + /* enable output for NCE */ + writel(KB9202_NAND_NCE, AT91C_PIOC_OER); + + return (0); +}