From: Icenowy Zheng Date: Thu, 26 Oct 2017 03:14:44 +0000 (+0800) Subject: sunxi: change the DE1 video option to CONFIG_VIDEO_SUNXI X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=401a3ca0fb7070ab1654dde67192037b64fe0873;p=u-boot.git sunxi: change the DE1 video option to CONFIG_VIDEO_SUNXI The sunxi DE1 video option used to be CONFIG_VIDEO, which has the same name as the "Enable legacy video support" option in drivers/video/Kconfig. Change the option name to CONFIG_VIDEO_SUNXI, which is really used by Makefile under drivers/video/sunxi/, and defined in sunxi-common.h when CONFIG_VIDEO is selected before this change. Now CONFIG_VIDEO_SUNXI selects CONFIG_VIDEO and the usages of CONFIG_VIDEO in sunxi Kconfig and config headers are all converted to use CONFIG_VIDEO_SUNXI. Signed-off-by: Icenowy Zheng --- diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index 2309f59999..3c29fc61f7 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -606,7 +606,7 @@ config AXP_GPIO ---help--- Say Y here to enable support for the gpio pins of the axp PMIC ICs. -config VIDEO +config VIDEO_SUNXI bool "Enable graphical uboot console on HDMI, LCD or VGA" depends on !MACH_SUN8I_A83T depends on !MACH_SUNXI_H3_H5 @@ -614,6 +614,7 @@ config VIDEO depends on !MACH_SUN8I_V3S depends on !MACH_SUN9I depends on !MACH_SUN50I + select VIDEO default y ---help--- Say Y here to add support for using a cfb console on the HDMI, LCD @@ -622,21 +623,21 @@ config VIDEO config VIDEO_HDMI bool "HDMI output support" - depends on VIDEO && !MACH_SUN8I + depends on VIDEO_SUNXI && !MACH_SUN8I default y ---help--- Say Y here to add support for outputting video over HDMI. config VIDEO_VGA bool "VGA output support" - depends on VIDEO && (MACH_SUN4I || MACH_SUN7I) + depends on VIDEO_SUNXI && (MACH_SUN4I || MACH_SUN7I) default n ---help--- Say Y here to add support for outputting video over VGA. config VIDEO_VGA_VIA_LCD bool "VGA via LCD controller support" - depends on VIDEO && (MACH_SUN5I || MACH_SUN6I || MACH_SUN8I) + depends on VIDEO_SUNXI && (MACH_SUN5I || MACH_SUN6I || MACH_SUN8I) default n ---help--- Say Y here to add support for external DACs connected to the parallel @@ -663,14 +664,14 @@ config VIDEO_VGA_EXTERNAL_DAC_EN config VIDEO_COMPOSITE bool "Composite video output support" - depends on VIDEO && (MACH_SUN4I || MACH_SUN5I || MACH_SUN7I) + depends on VIDEO_SUNXI && (MACH_SUN4I || MACH_SUN5I || MACH_SUN7I) default n ---help--- Say Y here to add support for outputting composite video. config VIDEO_LCD_MODE string "LCD panel timing details" - depends on VIDEO + depends on VIDEO_SUNXI default "" ---help--- LCD panel timing details string, leave empty if there is no LCD panel. @@ -680,14 +681,14 @@ config VIDEO_LCD_MODE config VIDEO_LCD_DCLK_PHASE int "LCD panel display clock phase" - depends on VIDEO + depends on VIDEO_SUNXI default 1 ---help--- Select LCD panel display clock phase shift, range 0-3. config VIDEO_LCD_POWER string "LCD panel power enable pin" - depends on VIDEO + depends on VIDEO_SUNXI default "" ---help--- Set the power enable pin for the LCD panel. This takes a string in the @@ -695,7 +696,7 @@ config VIDEO_LCD_POWER config VIDEO_LCD_RESET string "LCD panel reset pin" - depends on VIDEO + depends on VIDEO_SUNXI default "" ---help--- Set the reset pin for the LCD panel. This takes a string in the format @@ -703,7 +704,7 @@ config VIDEO_LCD_RESET config VIDEO_LCD_BL_EN string "LCD panel backlight enable pin" - depends on VIDEO + depends on VIDEO_SUNXI default "" ---help--- Set the backlight enable pin for the LCD panel. This takes a string in the @@ -712,7 +713,7 @@ config VIDEO_LCD_BL_EN config VIDEO_LCD_BL_PWM string "LCD panel backlight pwm pin" - depends on VIDEO + depends on VIDEO_SUNXI default "" ---help--- Set the backlight pwm pin for the LCD panel. This takes a string in the @@ -720,14 +721,14 @@ config VIDEO_LCD_BL_PWM config VIDEO_LCD_BL_PWM_ACTIVE_LOW bool "LCD panel backlight pwm is inverted" - depends on VIDEO + depends on VIDEO_SUNXI default y ---help--- Set this if the backlight pwm output is active low. config VIDEO_LCD_PANEL_I2C bool "LCD panel needs to be configured via i2c" - depends on VIDEO + depends on VIDEO_SUNXI default n select CMD_I2C ---help--- @@ -776,7 +777,7 @@ config VIDEO_DE2 choice prompt "LCD panel support" - depends on VIDEO + depends on VIDEO_SUNXI ---help--- Select which type of LCD panel to support. diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index 91751171ec..7d86b58417 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -268,7 +268,7 @@ extern int soft_i2c_gpio_scl; /* GPIO */ #define CONFIG_SUNXI_GPIO -#ifdef CONFIG_VIDEO +#ifdef CONFIG_VIDEO_SUNXI /* * The amount of RAM to keep free at the top of RAM when relocating u-boot, * to use as framebuffer. This must be a multiple of 4096. @@ -278,8 +278,6 @@ extern int soft_i2c_gpio_scl; /* Do we want to initialize a simple FB? */ #define CONFIG_VIDEO_DT_SIMPLEFB -#define CONFIG_VIDEO_SUNXI - #define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_STD_TIMINGS #define CONFIG_I2C_EDID @@ -288,7 +286,7 @@ extern int soft_i2c_gpio_scl; /* allow both serial and cfb console. */ /* stop x86 thinking in cfbconsole from trying to init a pc keyboard */ -#endif /* CONFIG_VIDEO */ +#endif /* CONFIG_VIDEO_SUNXI */ /* Ethernet support */ #ifdef CONFIG_SUNXI_EMAC diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index 5ee1601f0e..a39d3d5c42 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -5067,7 +5067,6 @@ CONFIG_VIDEO_MXS CONFIG_VIDEO_MXS_MODE_SYSTEM CONFIG_VIDEO_OMAP3 CONFIG_VIDEO_STD_TIMINGS -CONFIG_VIDEO_SUNXI CONFIG_VIDEO_VCXK CONFIG_VID_FLS_ENV CONFIG_VM86