From: Masahiro Yamada Date: Wed, 10 Aug 2016 07:08:36 +0000 (+0900) Subject: ARM: uniphier: refactor outer cache code X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=3ffc7475747e455c937339ab7c935af8e5edb2d1;p=u-boot.git ARM: uniphier: refactor outer cache code Unify the range/all operation routines into the common function, uniphier_cache_maint_common(), and sync code with Linux a bit more. This reduces the code duplication. Signed-off-by: Masahiro Yamada --- diff --git a/arch/arm/mach-uniphier/arm32/cache-uniphier.c b/arch/arm/mach-uniphier/arm32/cache-uniphier.c index 76fe5ebe09..7b126bb781 100644 --- a/arch/arm/mach-uniphier/arm32/cache-uniphier.c +++ b/arch/arm/mach-uniphier/arm32/cache-uniphier.c @@ -8,11 +8,18 @@ #include #include +#include #include +#include #include "ssc-regs.h" +#define UNIPHIER_SSCOQAD_IS_NEEDED(op) \ + ((op & UNIPHIER_SSCOQM_S_MASK) == UNIPHIER_SSCOQM_S_RANGE) + #ifdef CONFIG_UNIPHIER_L2CACHE_ON + +/* uniphier_cache_sync - perform a sync point for a particular cache level */ static void uniphier_cache_sync(void) { /* drain internal buffers */ @@ -21,53 +28,40 @@ static void uniphier_cache_sync(void) readl(UNIPHIER_SSCOPE); } -static void uniphier_cache_maint_all(u32 operation) +/** + * uniphier_cache_maint_common - run a queue operation + * + * @start: start address of range operation (don't care for "all" operation) + * @size: data size of range operation (don't care for "all" operation) + * @operation: flags to specify the desired cache operation + */ +static void uniphier_cache_maint_common(u32 start, u32 size, u32 operation) { /* clear the complete notification flag */ writel(UNIPHIER_SSCOLPQS_EF, UNIPHIER_SSCOLPQS); - /* try until the command is successfully set */ do { - writel(UNIPHIER_SSCOQM_S_ALL | UNIPHIER_SSCOQM_CE | operation, - UNIPHIER_SSCOQM); - } while (readl(UNIPHIER_SSCOPPQSEF) & - (UNIPHIER_SSCOPPQSEF_FE | UNIPHIER_SSCOPPQSEF_OE)); + /* set cache operation */ + writel(UNIPHIER_SSCOQM_CE | operation, UNIPHIER_SSCOQM); - /* wait until the operation is completed */ - while (readl(UNIPHIER_SSCOLPQS) != UNIPHIER_SSCOLPQS_EF) - ; + /* set address range if needed */ + if (likely(UNIPHIER_SSCOQAD_IS_NEEDED(operation))) { + writel(start, UNIPHIER_SSCOQAD); + writel(size, UNIPHIER_SSCOQSZ); + } + } while (unlikely(readl(UNIPHIER_SSCOPPQSEF) & + (UNIPHIER_SSCOPPQSEF_FE | UNIPHIER_SSCOPPQSEF_OE))); - uniphier_cache_sync(); -} - -void v7_outer_cache_flush_all(void) -{ - uniphier_cache_maint_all(UNIPHIER_SSCOQM_CM_FLUSH); + /* wait until the operation is completed */ + while (likely(readl(UNIPHIER_SSCOLPQS) != UNIPHIER_SSCOLPQS_EF)) + cpu_relax(); } -void v7_outer_cache_inval_all(void) +static void uniphier_cache_maint_all(u32 operation) { - uniphier_cache_maint_all(UNIPHIER_SSCOQM_CM_INV); -} + uniphier_cache_maint_common(0, 0, UNIPHIER_SSCOQM_S_ALL | operation); -static void __uniphier_cache_maint_range(u32 start, u32 size, u32 operation) -{ - /* clear the complete notification flag */ - writel(UNIPHIER_SSCOLPQS_EF, UNIPHIER_SSCOLPQS); - - /* try until the command is successfully set */ - do { - writel(UNIPHIER_SSCOQM_S_RANGE | UNIPHIER_SSCOQM_CE | operation, - UNIPHIER_SSCOQM); - writel(start, UNIPHIER_SSCOQAD); - writel(size, UNIPHIER_SSCOQSZ); - - } while (readl(UNIPHIER_SSCOPPQSEF) & - (UNIPHIER_SSCOPPQSEF_FE | UNIPHIER_SSCOPPQSEF_OE)); - - /* wait until the operation is completed */ - while (readl(UNIPHIER_SSCOLPQS) != UNIPHIER_SSCOLPQS_EF) - ; + uniphier_cache_sync(); } static void uniphier_cache_maint_range(u32 start, u32 end, u32 operation) @@ -75,8 +69,8 @@ static void uniphier_cache_maint_range(u32 start, u32 end, u32 operation) u32 size; /* - * If start address is not aligned to cache-line, - * do cache operation for the first cache-line + * If the start address is not aligned, + * perform a cache operation for the first cache-line */ start = start & ~(UNIPHIER_SSC_LINE_SIZE - 1); @@ -89,15 +83,16 @@ static void uniphier_cache_maint_range(u32 start, u32 end, u32 operation) } /* - * If end address is not aligned to cache-line, - * do cache operation for the last cache-line + * If the end address is not aligned, + * perform a cache operation for the last cache-line */ size = ALIGN(size, UNIPHIER_SSC_LINE_SIZE); while (size) { - u32 chunk_size = size > UNIPHIER_SSC_RANGE_OP_MAX_SIZE ? - UNIPHIER_SSC_RANGE_OP_MAX_SIZE : size; - __uniphier_cache_maint_range(start, chunk_size, operation); + u32 chunk_size = min_t(u32, size, UNIPHIER_SSC_RANGE_OP_MAX_SIZE); + + uniphier_cache_maint_common(start, chunk_size, + UNIPHIER_SSCOQM_S_RANGE | operation); start += chunk_size; size -= chunk_size; @@ -106,6 +101,16 @@ static void uniphier_cache_maint_range(u32 start, u32 end, u32 operation) uniphier_cache_sync(); } +void v7_outer_cache_flush_all(void) +{ + uniphier_cache_maint_all(UNIPHIER_SSCOQM_CM_FLUSH); +} + +void v7_outer_cache_inval_all(void) +{ + uniphier_cache_maint_all(UNIPHIER_SSCOQM_CM_INV); +} + void v7_outer_cache_flush_range(u32 start, u32 end) { uniphier_cache_maint_range(start, end, UNIPHIER_SSCOQM_CM_FLUSH); @@ -115,8 +120,8 @@ void v7_outer_cache_inval_range(u32 start, u32 end) { if (start & (UNIPHIER_SSC_LINE_SIZE - 1)) { start &= ~(UNIPHIER_SSC_LINE_SIZE - 1); - __uniphier_cache_maint_range(start, UNIPHIER_SSC_LINE_SIZE, - UNIPHIER_SSCOQM_CM_FLUSH); + uniphier_cache_maint_range(start, UNIPHIER_SSC_LINE_SIZE, + UNIPHIER_SSCOQM_CM_FLUSH); start += UNIPHIER_SSC_LINE_SIZE; } @@ -127,8 +132,8 @@ void v7_outer_cache_inval_range(u32 start, u32 end) if (end & (UNIPHIER_SSC_LINE_SIZE - 1)) { end &= ~(UNIPHIER_SSC_LINE_SIZE - 1); - __uniphier_cache_maint_range(end, UNIPHIER_SSC_LINE_SIZE, - UNIPHIER_SSCOQM_CM_FLUSH); + uniphier_cache_maint_range(end, UNIPHIER_SSC_LINE_SIZE, + UNIPHIER_SSCOQM_CM_FLUSH); } if (start >= end) {