From: Marek Vasut <marek.vasut@gmail.com>
Date: Sun, 20 Aug 2017 15:13:46 +0000 (+0200)
Subject: ARM: rmobile: Remove Serial SH probing from ULCB board
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=3f63551471b6cf72bf81e497aac9bada705b4f57;p=u-boot.git

ARM: rmobile: Remove Serial SH probing from ULCB board

Drop the Serial SH bit from the board since UART now probes from DT instead.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
---

diff --git a/board/renesas/ulcb/ulcb.c b/board/renesas/ulcb/ulcb.c
index e249bd27d4..6b080311d0 100644
--- a/board/renesas/ulcb/ulcb.c
+++ b/board/renesas/ulcb/ulcb.c
@@ -232,15 +232,3 @@ int dram_init_banksize(void)
 const struct rmobile_sysinfo sysinfo = {
 	CONFIG_RCAR_BOARD_STRING
 };
-
-static const struct sh_serial_platdata serial_platdata = {
-	.base = SCIF2_BASE,
-	.type = PORT_SCIF,
-	.clk = CONFIG_SH_SCIF_CLK_FREQ,
-	.clk_mode = INT_CLK,
-};
-
-U_BOOT_DEVICE(salvator_x_scif2) = {
-	.name = "serial_sh",
-	.platdata = &serial_platdata,
-};