From: Chris Morgan Date: Thu, 19 Sep 2024 14:00:20 +0000 (-0500) Subject: board: rockchip: Add vdd_cpu reg fixup for RGXX3 Series X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=3f0c97be8741a957e5db25b551423c85fb56ab87;p=u-boot.git board: rockchip: Add vdd_cpu reg fixup for RGXX3 Series Some of the Powkiddy devices switched to using a different vendor for the vdd_cpu regulator. Unfortunately the device does not have a new revision to denote this, so users have no way of knowing in advance. Add code to detect if a device is present at addresses 0x1c or 0x40 on the i2c0 bus and update the devicetree if needed. Signed-off-by: Chris Morgan Reviewed-by: Kever Yang --- diff --git a/board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c b/board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c index 224019f9ba..c1d1826fd1 100644 --- a/board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c +++ b/board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c @@ -43,6 +43,7 @@ struct rg3xx_model { const char *board_name; const char *fdtfile; const bool detect_panel; + const bool detect_regulator; const bool uart_con; }; @@ -69,6 +70,7 @@ static const struct rg3xx_model rg3xx_model_details[] = { /* Device is identical to RG353P. */ .fdtfile = DTB_DIR "rk3566-anbernic-rg353p.dtb", .detect_panel = 1, + .detect_regulator = 0, .uart_con = 1, }, [RG353P] = { @@ -77,6 +79,7 @@ static const struct rg3xx_model rg3xx_model_details[] = { .board_name = "Anbernic RG353P", .fdtfile = DTB_DIR "rk3566-anbernic-rg353p.dtb", .detect_panel = 1, + .detect_regulator = 0, .uart_con = 1, }, [RG353V] = { @@ -85,6 +88,7 @@ static const struct rg3xx_model rg3xx_model_details[] = { .board_name = "Anbernic RG353V", .fdtfile = DTB_DIR "rk3566-anbernic-rg353v.dtb", .detect_panel = 1, + .detect_regulator = 0, .uart_con = 1, }, [RG503] = { @@ -93,6 +97,7 @@ static const struct rg3xx_model rg3xx_model_details[] = { .board_name = "Anbernic RG503", .fdtfile = DTB_DIR "rk3566-anbernic-rg503.dtb", .detect_panel = 0, + .detect_regulator = 0, .uart_con = 1, }, [RGB30] = { @@ -101,6 +106,7 @@ static const struct rg3xx_model rg3xx_model_details[] = { .board_name = "Powkiddy RGB30", .fdtfile = DTB_DIR "rk3566-powkiddy-rgb30.dtb", .detect_panel = 0, + .detect_regulator = 1, .uart_con = 0, }, [RK2023] = { @@ -109,6 +115,7 @@ static const struct rg3xx_model rg3xx_model_details[] = { .board_name = "Powkiddy RK2023", .fdtfile = DTB_DIR "rk3566-powkiddy-rk2023.dtb", .detect_panel = 0, + .detect_regulator = 1, .uart_con = 0, }, [RGARCD] = { @@ -117,6 +124,7 @@ static const struct rg3xx_model rg3xx_model_details[] = { .board_name = "Anbernic RG ARC-D", .fdtfile = DTB_DIR "rk3566-anbernic-rg-arc-d.dtb", .detect_panel = 0, + .detect_regulator = 0, .uart_con = 1, }, [RGB10MAX3] = { @@ -125,6 +133,7 @@ static const struct rg3xx_model rg3xx_model_details[] = { .board_name = "Powkiddy RGB10MAX3", .fdtfile = DTB_DIR "rk3566-powkiddy-rgb10max3.dtb", .detect_panel = 0, + .detect_regulator = 1, .uart_con = 0, }, /* Devices with duplicate ADC value */ @@ -134,6 +143,7 @@ static const struct rg3xx_model rg3xx_model_details[] = { .board_name = "Anbernic RG353PS", .fdtfile = DTB_DIR "rk3566-anbernic-rg353ps.dtb", .detect_panel = 1, + .detect_regulator = 0, .uart_con = 1, }, [RG353VS] = { @@ -142,6 +152,7 @@ static const struct rg3xx_model rg3xx_model_details[] = { .board_name = "Anbernic RG353VS", .fdtfile = DTB_DIR "rk3566-anbernic-rg353vs.dtb", .detect_panel = 1, + .detect_regulator = 0, .uart_con = 1, }, [RGARCS] = { @@ -150,6 +161,7 @@ static const struct rg3xx_model rg3xx_model_details[] = { .board_name = "Anbernic RG ARC-S", .fdtfile = DTB_DIR "rk3566-anbernic-rg-arc-s.dtb", .detect_panel = 0, + .detect_regulator = 0, .uart_con = 1, }, }; @@ -172,6 +184,22 @@ static const struct rg353_panel rg353_panel_details[] = { }, }; +struct powkiddy_regulators { + const u8 addr; + const char *regulator_compat; +}; + +static const struct powkiddy_regulators regulator_details[] = { + { + .addr = 0x1c, + .regulator_compat = "tcs,tcs4525", + }, + { + .addr = 0x40, + .regulator_compat = "fcs,fan53555", + }, +}; + /* * Start LED very early so user knows device is on. Set color * to red. @@ -361,6 +389,44 @@ int rgxx3_detect_display(void) return 0; } +/* + * Some of the Powkiddy devices switched the CPU regulator, but users + * are not able to determine this by looking at their hardware. + * Attempt to auto-detect this situation and fixup the device-tree. + */ +int rgxx3_detect_regulator(void) +{ + struct udevice *bus; + struct udevice *chip; + u8 val; + int ret; + + /* Get the correct i2c bus (i2c0). */ + ret = uclass_get_device_by_name(UCLASS_I2C, + "i2c@fdd40000", &bus); + if (ret) + return ret; + + /* + * Check for all vdd_cpu regulators and read an arbitrary + * register to confirm it's present. + */ + for (int i = 0; i < ARRAY_SIZE(regulator_details); i++) { + ret = i2c_get_chip(bus, regulator_details[i].addr, + 1, &chip); + if (ret) + return ret; + + ret = dm_i2c_read(chip, 0, &val, 1); + if (!ret) { + env_set("vdd_cpu", regulator_details[i].regulator_compat); + break; + } + } + + return 0; +} + int rgxx3_read_board_id(void) { u32 adc_info; @@ -485,6 +551,16 @@ int rk_board_late_init(void) printf("Failed to detect panel type\n"); } + /* + * Skip vdd_cpu regulator detection if not needed. Warn but + * don't fail for errors in auto-detection of regulator. + */ + if (rg3xx_model_details[gd->board_type].detect_regulator) { + ret = rgxx3_detect_regulator(); + if (ret) + printf("Unable to detect vdd_cpu regulator\n"); + } + end: /* Turn off red LED and turn on orange LED. */ writel(GPIO_WRITEMASK(GPIO_C7 | GPIO_C6 | GPIO_C5) | GPIO_C6, @@ -547,6 +623,71 @@ int rgxx3_panel_fixup(void *blob) return 0; } +int rgxx3_regulator_fixup(void *blob) +{ + const struct powkiddy_regulators *vdd_cpu = NULL; + int node, ret, i; + char path[] = "/i2c@fdd40000/regulator@00"; + char name[] = "regulator@00"; + char *env; + + env = env_get("vdd_cpu"); + if (!env) { + printf("Can't get vdd_cpu env\n"); + return -EINVAL; + } + + /* + * Find the device we have in our tree, which may or may not + * be present. + */ + for (i = 0; i < ARRAY_SIZE(regulator_details); i++) { + sprintf(path, "/i2c@fdd40000/regulator@%02x", + regulator_details[i].addr); + node = fdt_path_offset(blob, path); + if (node > 0) + break; + + printf("Unable to find vdd_cpu\n"); + return -ENODEV; + } + + node = fdt_path_offset(blob, path); + if (!(node > 0)) { + printf("Can't find the vdd_cpu node\n"); + return -ENODEV; + } + + ret = fdt_node_check_compatible(blob, node, env); + if (ret < 0) + return -ENODEV; + + /* vdd_cpu regulators match, return 0. */ + if (!ret) + return 0; + + /* Regulators don't match, search by first compatible value. */ + for (i = 0; i < ARRAY_SIZE(regulator_details); i++) { + if (!strcmp(env, regulator_details[i].regulator_compat)) { + vdd_cpu = ®ulator_details[i]; + break; + } + } + + if (!vdd_cpu) { + printf("Unable to identify vdd_cpu by compat string\n"); + return -ENODEV; + } + + /* Set the compatible and reg with the auto-detected values */ + fdt_setprop_string(blob, node, "compatible", vdd_cpu->regulator_compat); + fdt_setprop_u32(blob, node, "reg", vdd_cpu->addr); + sprintf(name, "regulator@%02x", vdd_cpu->addr); + fdt_set_name(blob, node, name); + + return 0; +} + int ft_board_setup(void *blob, struct bd_info *bd) { int ret; @@ -562,6 +703,12 @@ int ft_board_setup(void *blob, struct bd_info *bd) printf("Unable to update panel compat\n"); } + if (rg3xx_model_details[gd->board_type].detect_regulator) { + ret = rgxx3_regulator_fixup(blob); + if (ret) + printf("Unable to update vdd_cpu compat\n"); + } + return 0; }