From: Marek Vasut Date: Mon, 29 Jul 2019 17:59:44 +0000 (+0200) Subject: ARM: renesas: Add R8A77980 V3H Condor board code X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=3ebb91914f4831df4db42675c4dd1f9a0b7548c7;p=u-boot.git ARM: renesas: Add R8A77980 V3H Condor board code Add board code for the R8A77980 V3H Condor board. Signed-off-by: Marek Vasut Cc: Nobuhiro Iwamatsu --- diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 7c806eee9e..9e7d6d6490 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -645,6 +645,7 @@ dtb-$(CONFIG_RCAR_GEN3) += \ r8a77965-m3nulcb-u-boot.dtb \ r8a77965-salvator-x-u-boot.dtb \ r8a77970-eagle-u-boot.dtb \ + r8a77980-condor-u-boot.dtb \ r8a77990-ebisu-u-boot.dtb \ r8a77995-draak-u-boot.dtb diff --git a/arch/arm/dts/r8a77980-condor-u-boot.dts b/arch/arm/dts/r8a77980-condor-u-boot.dts new file mode 100644 index 0000000000..1b22c7f0b9 --- /dev/null +++ b/arch/arm/dts/r8a77980-condor-u-boot.dts @@ -0,0 +1,34 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source extras for U-Boot for the Condor board + * + * Copyright (C) 2019 Marek Vasut + */ + +#include "r8a77980-condor.dts" +#include "r8a77980-u-boot.dtsi" + +/ { + aliases { + spi0 = &rpc; + }; +}; + +&rpc { + num-cs = <1>; + status = "okay"; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + + flash0: spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "s25fs512s", "jedec,spi-nor"; + spi-max-frequency = <50000000>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <1>; + reg = <0>; + status = "okay"; + }; +}; diff --git a/arch/arm/dts/r8a77980-condor.dts b/arch/arm/dts/r8a77980-condor.dts new file mode 100644 index 0000000000..5a7012be0d --- /dev/null +++ b/arch/arm/dts/r8a77980-condor.dts @@ -0,0 +1,292 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the Condor board + * + * Copyright (C) 2018 Renesas Electronics Corp. + * Copyright (C) 2018 Cogent Embedded, Inc. + */ + +/dts-v1/; +#include "r8a77980.dtsi" + +/ { + model = "Renesas Condor board based on r8a77980"; + compatible = "renesas,condor", "renesas,r8a77980"; + + aliases { + serial0 = &scif0; + ethernet0 = &gether; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0 0x48000000 0 0x78000000>; + }; + + d3_3v: regulator-0 { + compatible = "regulator-fixed"; + regulator-name = "D3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + vddq_vin01: regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "VDDQ_VIN01"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + d1_8v: regulator-2 { + compatible = "regulator-fixed"; + regulator-name = "D1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&adv7511_out>; + }; + }; + }; + + lvds-decoder { + compatible = "thine,thc63lvd1024"; + vcc-supply = <&d3_3v>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + thc63lvd1024_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + + port@2 { + reg = <2>; + thc63lvd1024_out: endpoint { + remote-endpoint = <&adv7511_in>; + }; + }; + }; + }; + + x1_clk: x1-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <148500000>; + }; +}; + +&canfd { + pinctrl-0 = <&canfd0_pins>; + pinctrl-names = "default"; + status = "okay"; + + channel0 { + status = "okay"; + }; +}; + +&du { + clocks = <&cpg CPG_MOD 724>, + <&x1_clk>; + clock-names = "du.0", "dclkin.0"; + status = "okay"; +}; + +&extal_clk { + clock-frequency = <16666666>; +}; + +&extalr_clk { + clock-frequency = <32768>; +}; + +&gether { + pinctrl-0 = <&gether_pins>; + pinctrl-names = "default"; + + phy-mode = "rgmii-id"; + phy-handle = <&phy0>; + renesas,no-ether-link; + status = "okay"; + + phy0: ethernet-phy@0 { + rxc-skew-ps = <1500>; + reg = <0>; + interrupt-parent = <&gpio4>; + interrupts = <23 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c0 { + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + io_expander0: gpio@20 { + compatible = "onnn,pca9654"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + + io_expander1: gpio@21 { + compatible = "onnn,pca9654"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + + hdmi@39 { + compatible = "adi,adv7511w"; + reg = <0x39>; + interrupt-parent = <&gpio1>; + interrupts = <20 IRQ_TYPE_LEVEL_LOW>; + avdd-supply = <&d1_8v>; + dvdd-supply = <&d1_8v>; + pvdd-supply = <&d1_8v>; + bgvdd-supply = <&d1_8v>; + dvdd-3v-supply = <&d3_3v>; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + adi,input-style = <1>; + adi,input-justification = "evenly"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7511_in: endpoint { + remote-endpoint = <&thc63lvd1024_out>; + }; + }; + + port@1 { + reg = <1>; + adv7511_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; +}; + +&lvds0 { + status = "okay"; + + ports { + port@1 { + lvds0_out: endpoint { + remote-endpoint = <&thc63lvd1024_in>; + }; + }; + }; +}; + +&mmc0 { + pinctrl-0 = <&mmc_pins>; + pinctrl-1 = <&mmc_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <&d3_3v>; + vqmmc-supply = <&vddq_vin01>; + mmc-hs200-1_8v; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&pciec { + status = "okay"; +}; + +&pcie_bus_clk { + clock-frequency = <100000000>; +}; + +&pcie_phy { + status = "okay"; +}; + +&pfc { + canfd0_pins: canfd0 { + groups = "canfd0_data_a"; + function = "canfd0"; + }; + + gether_pins: gether { + groups = "gether_mdio_a", "gether_rgmii", + "gether_txcrefclk", "gether_txcrefclk_mega"; + function = "gether"; + }; + + i2c0_pins: i2c0 { + groups = "i2c0"; + function = "i2c0"; + }; + + mmc_pins: mmc { + groups = "mmc_data8", "mmc_ctrl", "mmc_ds"; + function = "mmc"; + power-source = <3300>; + }; + + mmc_pins_uhs: mmc_uhs { + groups = "mmc_data8", "mmc_ctrl", "mmc_ds"; + function = "mmc"; + power-source = <1800>; + }; + + scif0_pins: scif0 { + groups = "scif0_data"; + function = "scif0"; + }; + + scif_clk_pins: scif_clk { + groups = "scif_clk_b"; + function = "scif_clk"; + }; +}; + +&rwdt { + timeout-sec = <60>; + status = "okay"; +}; + +&scif0 { + pinctrl-0 = <&scif0_pins>, <&scif_clk_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&scif_clk { + clock-frequency = <14745600>; +}; diff --git a/arch/arm/mach-rmobile/Kconfig.64 b/arch/arm/mach-rmobile/Kconfig.64 index 2d549f7bb4..c8f93c68bb 100644 --- a/arch/arm/mach-rmobile/Kconfig.64 +++ b/arch/arm/mach-rmobile/Kconfig.64 @@ -43,6 +43,12 @@ choice prompt "Renesas ARM64 SoCs board select" optional +config TARGET_CONDOR + bool "Condor board" + imply R8A77980 + help + Support for Renesas R-Car Gen3 Condor platform + config TARGET_DRAAK bool "Draak board" imply R8A77995 @@ -88,6 +94,7 @@ endchoice config SYS_SOC default "rmobile" +source "board/renesas/condor/Kconfig" source "board/renesas/draak/Kconfig" source "board/renesas/eagle/Kconfig" source "board/renesas/ebisu/Kconfig" diff --git a/board/renesas/condor/Kconfig b/board/renesas/condor/Kconfig new file mode 100644 index 0000000000..2286d88de7 --- /dev/null +++ b/board/renesas/condor/Kconfig @@ -0,0 +1,15 @@ +if TARGET_CONDOR + +config SYS_SOC + default "rmobile" + +config SYS_BOARD + default "condor" + +config SYS_VENDOR + default "renesas" + +config SYS_CONFIG_NAME + default "condor" + +endif diff --git a/board/renesas/condor/MAINTAINERS b/board/renesas/condor/MAINTAINERS new file mode 100644 index 0000000000..73b010b9e7 --- /dev/null +++ b/board/renesas/condor/MAINTAINERS @@ -0,0 +1,6 @@ +CONDOR BOARD +M: Marek Vasut +S: Maintained +F: board/renesas/condor/ +F: include/configs/condor.h +F: configs/r8a77980_condor_defconfig diff --git a/board/renesas/condor/Makefile b/board/renesas/condor/Makefile new file mode 100644 index 0000000000..cf6d566a9b --- /dev/null +++ b/board/renesas/condor/Makefile @@ -0,0 +1,13 @@ +# +# board/renesas/condor/Makefile +# +# Copyright (C) 2019 Renesas Electronics Corporation +# +# SPDX-License-Identifier: GPL-2.0+ +# + +ifdef CONFIG_SPL_BUILD +obj-y := ../rcar-common/gen3-spl.o +else +obj-y := condor.o ../rcar-common/common.o +endif diff --git a/board/renesas/condor/condor.c b/board/renesas/condor/condor.c new file mode 100644 index 0000000000..d1cbbc3339 --- /dev/null +++ b/board/renesas/condor/condor.c @@ -0,0 +1,55 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * board/renesas/condor/condor.c + * This file is Condor board support. + * + * Copyright (C) 2019 Marek Vasut + */ + +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +void s_init(void) +{ +} + +int board_early_init_f(void) +{ + return 0; +} + +int board_init(void) +{ + /* adress of boot parameters */ + gd->bd->bi_boot_params = CONFIG_SYS_TEXT_BASE + 0x50000; + + return 0; +} + +#define RST_BASE 0xE6160000 +#define RST_CA57RESCNT (RST_BASE + 0x40) +#define RST_CA53RESCNT (RST_BASE + 0x44) +#define RST_RSTOUTCR (RST_BASE + 0x58) +#define RST_CA57_CODE 0xA5A5000F +#define RST_CA53_CODE 0x5A5A000F + +void reset_cpu(ulong addr) +{ + unsigned long midr, cputype; + + asm volatile("mrs %0, midr_el1" : "=r" (midr)); + cputype = (midr >> 4) & 0xfff; + + if (cputype == 0xd03) + writel(RST_CA53_CODE, RST_CA53RESCNT); + else if (cputype == 0xd07) + writel(RST_CA57_CODE, RST_CA57RESCNT); + else + hang(); +} diff --git a/configs/r8a77980_condor_defconfig b/configs/r8a77980_condor_defconfig new file mode 100644 index 0000000000..a403a67a45 --- /dev/null +++ b/configs/r8a77980_condor_defconfig @@ -0,0 +1,69 @@ +CONFIG_ARM=y +CONFIG_ARCH_RMOBILE=y +CONFIG_SYS_TEXT_BASE=0x50000000 +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_RCAR_GEN3=y +CONFIG_TARGET_CONDOR=y +CONFIG_SMBIOS_PRODUCT_NAME="" +CONFIG_FIT=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="root=/dev/nfs rw nfsroot=192.168.0.1:/export/rfs ip=192.168.0.20" +CONFIG_SUPPORT_RAW_INITRD=y +CONFIG_DEFAULT_FDT_FILE="r8a77980-condor.dtb" +CONFIG_VERSION_VARIABLE=y +CONFIG_SPL_TEXT_BASE=0xe6318000 +CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y +CONFIG_CMD_DFU=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_SF=y +CONFIG_CMD_SPI=y +CONFIG_CMD_USB=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="r8a77980-condor-u-boot" +CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_REGMAP=y +CONFIG_SYSCON=y +CONFIG_BLK=y +CONFIG_CLK=y +CONFIG_CLK_RENESAS=y +CONFIG_DFU_TFTP=y +CONFIG_DFU_RAM=y +CONFIG_DFU_SF=y +CONFIG_DM_GPIO=y +CONFIG_RCAR_GPIO=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_RCAR_IIC=y +# CONFIG_MMC is not set +CONFIG_DM_SPI_FLASH=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_SPANSION=y +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set +CONFIG_PHY_MICREL=y +CONFIG_PHY_MICREL_KSZ90X1=y +CONFIG_DM_ETH=y +CONFIG_SH_ETHER=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y +CONFIG_SCIF_CONSOLE=y +CONFIG_SPI=y +CONFIG_DM_SPI=y +CONFIG_RENESAS_RPC_SPI=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_GENERIC=y +CONFIG_USB_STORAGE=y +CONFIG_OF_LIBFDT_OVERLAY=y +CONFIG_SMBIOS_MANUFACTURER="" diff --git a/include/configs/condor.h b/include/configs/condor.h new file mode 100644 index 0000000000..e3c146e824 --- /dev/null +++ b/include/configs/condor.h @@ -0,0 +1,41 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * include/configs/condor.h + * This file is Condor board configuration. + * + * Copyright (C) 2019 Renesas Electronics Corporation + */ + +#ifndef __CONDOR_H +#define __CONDOR_H + +#include "rcar-gen3-common.h" + +/* Ethernet RAVB */ +#define CONFIG_BITBANGMII +#define CONFIG_BITBANGMII_MULTI + +/* Environment compatibility */ +#undef CONFIG_ENV_SIZE_REDUND +#undef CONFIG_ENV_SECT_SIZE +#define CONFIG_ENV_SECT_SIZE (256 * 1024) +#define CONFIG_ENV_OFFSET 0x700000 + +/* SH Ether */ +#define CONFIG_SH_ETHER_USE_PORT 0 +#define CONFIG_SH_ETHER_PHY_ADDR 0x1 +#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RMII +#define CONFIG_SH_ETHER_CACHE_WRITEBACK +#define CONFIG_SH_ETHER_CACHE_INVALIDATE +#define CONFIG_SH_ETHER_ALIGNE_SIZE 64 +#define CONFIG_BITBANGMII +#define CONFIG_BITBANGMII_MULTI + +/* Board Clock */ +/* XTAL_CLK : 33.33MHz */ +#define CONFIG_SYS_CLK_FREQ 33333333u + +/* Generic Timer Definitions (use in assembler source) */ +#define COUNTER_FREQUENCY 0xFE502A /* 16.66MHz from CPclk */ + +#endif /* __CONDOR_H */