From: Heinrich Schuchardt Date: Tue, 29 Dec 2020 11:52:51 +0000 (+0100) Subject: video: remove unused include/mb862xx.h X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=3e831bfed4814fe20544d1b7b42c22aa3e74e8db;p=u-boot.git video: remove unused include/mb862xx.h CONFIG_VIDEO_MB862xx cannot be selected by any configuration. So we can eliminate include/mb862xx.h. Signed-off-by: Heinrich Schuchardt Reviewed-by: Simon Glass --- diff --git a/board/socrates/socrates.c b/board/socrates/socrates.c index 0c9262d354..3444af6a8c 100644 --- a/board/socrates/socrates.c +++ b/board/socrates/socrates.c @@ -26,14 +26,12 @@ #include #include #include -#include #include #include "upm_table.h" DECLARE_GLOBAL_DATA_PTR; extern flash_info_t flash_info[]; /* FLASH chips info */ -extern GraphicDevice mb862xx; void local_bus_init (void); ulong flash_get_size (ulong base, int banknum); @@ -207,16 +205,6 @@ int ft_board_setup(void *blob, struct bd_info *bd) val[i++] = gd->bd->bi_flashstart; val[i++] = gd->bd->bi_flashsize; -#if defined(CONFIG_VIDEO_MB862xx) - if (mb862xx.frameAdrs == CONFIG_SYS_LIME_BASE) { - /* Fixup LIME mapping */ - val[i++] = 2; /* chip select number */ - val[i++] = 0; /* always 0 */ - val[i++] = CONFIG_SYS_LIME_BASE; - val[i++] = CONFIG_SYS_LIME_SIZE; - } -#endif - /* Fixup FPGA mapping */ val[i++] = 3; /* chip select number */ val[i++] = 0; /* always 0 */ diff --git a/include/mb862xx.h b/include/mb862xx.h deleted file mode 100644 index 54c8c757c0..0000000000 --- a/include/mb862xx.h +++ /dev/null @@ -1,101 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2007 - * DENX Software Engineering, Anatolij Gustschin, agust@denx.de - */ - -/* - * mb862xx.h - Graphic interface for Fujitsu CoralP/Lime - */ - -#ifndef _MB862XX_H_ -#define _MB862XX_H_ - -#define PCI_VENDOR_ID_FUJITSU 0x10CF -#define PCI_DEVICE_ID_CORAL_P 0x2019 -#define PCI_DEVICE_ID_CORAL_PA 0x201E - -#define MB862XX_TYPE_LIME 0x1 - -#define GC_HOST_BASE 0x01fc0000 -#define GC_DISP_BASE 0x01fd0000 -#define GC_DRAW_BASE 0x01ff0000 - -/* Host interface registers */ -#define GC_SRST 0x0000002c -#define GC_CCF 0x00000038 -#define GC_CID 0x000000f0 -#define GC_MMR 0x0000fffc - -/* - * Display Controller registers - * _A means the offset is aligned, we use these for boards - * with 8-/16-bit GDC access not working or buggy. - */ -#define GC_DCM0 0x00000000 -#define GC_HTP_A 0x00000004 -#define GC_HTP 0x00000006 -#define GC_HDB_HDP_A 0x00000008 -#define GC_HDP 0x00000008 -#define GC_HDB 0x0000000a -#define GC_VSW_HSW_HSP_A 0x0000000c -#define GC_HSP 0x0000000c -#define GC_HSW 0x0000000e -#define GC_VSW 0x0000000f -#define GC_VTR_A 0x00000010 -#define GC_VTR 0x00000012 -#define GC_VDP_VSP_A 0x00000014 -#define GC_VSP 0x00000014 -#define GC_VDP 0x00000016 -#define GC_WY_WX 0x00000018 -#define GC_WH_WW 0x0000001c -#define GC_L0M 0x00000020 -#define GC_L0OA0 0x00000024 -#define GC_L0DA0 0x00000028 -#define GC_L0DY_L0DX 0x0000002c -#define GC_L2M 0x00000040 -#define GC_L2OA0 0x00000044 -#define GC_L2DA0 0x00000048 -#define GC_L2OA1 0x0000004c -#define GC_L2DA1 0x00000050 -#define GC_L2DX 0x00000054 -#define GC_L2DY 0x00000056 -#define GC_DCM1 0x00000100 -#define GC_DCM2 0x00000104 -#define GC_DCM3 0x00000108 -#define GC_L0EM 0x00000110 -#define GC_L0WY_L0WX 0x00000114 -#define GC_L0WH_L0WW 0x00000118 -#define GC_L2EM 0x00000130 -#define GC_L2WX 0x00000134 -#define GC_L2WY 0x00000136 -#define GC_L2WW 0x00000138 -#define GC_L2WH 0x0000013a -#define GC_L0PAL0 0x00000400 - -/* Drawing registers */ -#define GC_CTR 0x00000400 -#define GC_IFCNT 0x00000408 -#define GC_FBR 0x00000440 -#define GC_XRES 0x00000444 -#define GC_CXMIN 0x00000454 -#define GC_CXMAX 0x00000458 -#define GC_CYMIN 0x0000045c -#define GC_CYMAX 0x00000460 -#define GC_FC 0x00000480 -#define GC_BC 0x00000484 -#define GC_FIFO 0x000004a0 -#define GC_REV 0x00008084 -#define GC_GEO_FIFO 0x00008400 - -typedef struct { - unsigned int index; - unsigned int value; -} gdc_regs; - -int mb862xx_probe(unsigned int addr); -const gdc_regs *board_get_regs (void); -unsigned int board_video_init (void); -void board_backlight_switch(int); - -#endif /* _MB862XX_H_ */