From: Masahiro Yamada <yamada.masahiro@socionext.com>
Date: Thu, 21 Apr 2016 05:43:20 +0000 (+0900)
Subject: ARM: dts: uniphier: add SD controller node for PH1-LD20
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=3d970876db14ca81b8fc66803f4473e719ad1350;p=u-boot.git

ARM: dts: uniphier: add SD controller node for PH1-LD20

PH1-LD20 does not support 1.8V signaling for SD card; only Default
Speed and High Speed (up to 50MHz) with 3.3V signaling is supported.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
---

diff --git a/arch/arm/dts/uniphier-ph1-ld20.dtsi b/arch/arm/dts/uniphier-ph1-ld20.dtsi
index fc1c6bfe5b..f9cc3c4bdb 100644
--- a/arch/arm/dts/uniphier-ph1-ld20.dtsi
+++ b/arch/arm/dts/uniphier-ph1-ld20.dtsi
@@ -226,6 +226,23 @@
 			reg = <0x59801000 0x400>;
 		};
 
+		mio: mioctrl@59810000 {
+			compatible = "socionext,ph1-ld20-mioctrl";
+			reg = <0x59810000 0x800>;
+			#clock-cells = <1>;
+		};
+
+		sd: sdhc@5a400000 {
+			compatible = "socionext,uniphier-sdhc";
+			status = "disabled";
+			reg = <0x5a400000 0x800>;
+			interrupts = <0 76 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sd>;
+			clocks = <&mio 0>;
+			bus-width = <4>;
+		};
+
 		pinctrl: pinctrl@5f801000 {
 			compatible = "socionext,ph1-ld20-pinctrl", "syscon";
 			reg = <0x5f801000 0xe00>;