From: Janine Hagemann Date: Tue, 28 Aug 2018 06:25:05 +0000 (+0200) Subject: net: gmac_rockchip: Add handling for RGMII_ID/RXID/TXID X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=3d1bd5b5908db002a7d52a43bca744bc33790453;p=u-boot.git net: gmac_rockchip: Add handling for RGMII_ID/RXID/TXID Using PHY internal delays in combination with the phy-mode rgmii-id/rxid/txid was not possible. Only rgmii was supported. Now we can disable rockchip's gmac delay lines and also use rgmii-id/rxid/txid. Based on commit eaf70ad14cbb ("net: stmmac: dwmac-rk: Add handling for RGMII_ID/RXID/TXID") for mainline linux kernel. Signed-off-by: Janine Hagemann Acked-by: Joe Hershberger Reviewed-by: David Wu Reviewed-by: Philipp Tomsich --- diff --git a/drivers/net/gmac_rockchip.c b/drivers/net/gmac_rockchip.c index 0f91731172..c01ae758c7 100644 --- a/drivers/net/gmac_rockchip.c +++ b/drivers/net/gmac_rockchip.c @@ -24,6 +24,11 @@ #include #include "designware.h" +DECLARE_GLOBAL_DATA_PTR; +#define DELAY_ENABLE(soc, tx, rx) \ + (((tx) ? soc##_TXCLK_DLY_ENA_GMAC_ENABLE : soc##_TXCLK_DLY_ENA_GMAC_DISABLE) | \ + ((rx) ? soc##_RXCLK_DLY_ENA_GMAC_ENABLE : soc##_RXCLK_DLY_ENA_GMAC_DISABLE)) + /* * Platform data for the gmac * @@ -286,8 +291,7 @@ static void rk3228_gmac_set_to_rgmii(struct gmac_rockchip_platdata *pdata) RK3228_RXCLK_DLY_ENA_GMAC_MASK | RK3228_TXCLK_DLY_ENA_GMAC_MASK, RK3228_GMAC_PHY_INTF_SEL_RGMII | - RK3228_RXCLK_DLY_ENA_GMAC_ENABLE | - RK3228_TXCLK_DLY_ENA_GMAC_ENABLE); + DELAY_ENABLE(RK3228, pdata->tx_delay, pdata->rx_delay)); rk_clrsetreg(&grf->mac_con[0], RK3228_CLK_RX_DL_CFG_GMAC_MASK | @@ -310,8 +314,7 @@ static void rk3288_gmac_set_to_rgmii(struct gmac_rockchip_platdata *pdata) RK3288_TXCLK_DLY_ENA_GMAC_MASK | RK3288_CLK_RX_DL_CFG_GMAC_MASK | RK3288_CLK_TX_DL_CFG_GMAC_MASK, - RK3288_RXCLK_DLY_ENA_GMAC_ENABLE | - RK3288_TXCLK_DLY_ENA_GMAC_ENABLE | + DELAY_ENABLE(RK3288, pdata->rx_delay, pdata->tx_delay) | pdata->rx_delay << RK3288_CLK_RX_DL_CFG_GMAC_SHIFT | pdata->tx_delay << RK3288_CLK_TX_DL_CFG_GMAC_SHIFT); } @@ -350,8 +353,7 @@ static void rk3328_gmac_set_to_rgmii(struct gmac_rockchip_platdata *pdata) RK3328_RXCLK_DLY_ENA_GMAC_MASK | RK3328_TXCLK_DLY_ENA_GMAC_MASK, RK3328_GMAC_PHY_INTF_SEL_RGMII | - RK3328_RXCLK_DLY_ENA_GMAC_ENABLE | - RK3328_TXCLK_DLY_ENA_GMAC_ENABLE); + DELAY_ENABLE(RK3328, pdata->tx_delay, pdata->rx_delay)); rk_clrsetreg(&grf->mac_con[0], RK3328_CLK_RX_DL_CFG_GMAC_MASK | @@ -392,8 +394,7 @@ static void rk3368_gmac_set_to_rgmii(struct gmac_rockchip_platdata *pdata) RK3368_TXCLK_DLY_ENA_GMAC_MASK | RK3368_CLK_RX_DL_CFG_GMAC_MASK | RK3368_CLK_TX_DL_CFG_GMAC_MASK, - RK3368_RXCLK_DLY_ENA_GMAC_ENABLE | - RK3368_TXCLK_DLY_ENA_GMAC_ENABLE | + DELAY_ENABLE(RK3368, pdata->tx_delay, pdata->rx_delay) | pdata->rx_delay << RK3368_CLK_RX_DL_CFG_GMAC_SHIFT | pdata->tx_delay << RK3368_CLK_TX_DL_CFG_GMAC_SHIFT); } @@ -413,8 +414,7 @@ static void rk3399_gmac_set_to_rgmii(struct gmac_rockchip_platdata *pdata) RK3399_TXCLK_DLY_ENA_GMAC_MASK | RK3399_CLK_RX_DL_CFG_GMAC_MASK | RK3399_CLK_TX_DL_CFG_GMAC_MASK, - RK3399_RXCLK_DLY_ENA_GMAC_ENABLE | - RK3399_TXCLK_DLY_ENA_GMAC_ENABLE | + DELAY_ENABLE(RK3399, pdata->tx_delay, pdata->rx_delay) | pdata->rx_delay << RK3399_CLK_RX_DL_CFG_GMAC_SHIFT | pdata->tx_delay << RK3399_CLK_TX_DL_CFG_GMAC_SHIFT); } @@ -451,40 +451,86 @@ static int gmac_rockchip_probe(struct udevice *dev) switch (eth_pdata->phy_interface) { case PHY_INTERFACE_MODE_RGMII: + /* Set to RGMII mode */ + if (ops->set_to_rgmii) + ops->set_to_rgmii(pdata); + else + return -EPERM; + /* * If the gmac clock is from internal pll, need to set and * check the return value for gmac clock at RGMII mode. If * the gmac clock is from external source, the clock rate * is not set, because of it is bypassed. */ + if (!pdata->clock_input) { rate = clk_set_rate(&clk, 125000000); if (rate != 125000000) return -EINVAL; } + break; + case PHY_INTERFACE_MODE_RGMII_ID: /* Set to RGMII mode */ - if (ops->set_to_rgmii) + if (ops->set_to_rgmii) { + pdata->tx_delay = 0; + pdata->rx_delay = 0; ops->set_to_rgmii(pdata); - else + } else return -EPERM; - break; - case PHY_INTERFACE_MODE_RMII: - /* The commet is the same as RGMII mode */ if (!pdata->clock_input) { - rate = clk_set_rate(&clk, 50000000); - if (rate != 50000000) + rate = clk_set_rate(&clk, 125000000); + if (rate != 125000000) return -EINVAL; } + break; + case PHY_INTERFACE_MODE_RMII: /* Set to RMII mode */ if (ops->set_to_rmii) ops->set_to_rmii(pdata); else return -EPERM; + if (!pdata->clock_input) { + rate = clk_set_rate(&clk, 50000000); + if (rate != 50000000) + return -EINVAL; + } + break; + + case PHY_INTERFACE_MODE_RGMII_RXID: + /* Set to RGMII_RXID mode */ + if (ops->set_to_rgmii) { + pdata->tx_delay = 0; + ops->set_to_rgmii(pdata); + } else + return -EPERM; + + if (!pdata->clock_input) { + rate = clk_set_rate(&clk, 125000000); + if (rate != 125000000) + return -EINVAL; + } break; + + case PHY_INTERFACE_MODE_RGMII_TXID: + /* Set to RGMII_TXID mode */ + if (ops->set_to_rgmii) { + pdata->rx_delay = 0; + ops->set_to_rgmii(pdata); + } else + return -EPERM; + + if (!pdata->clock_input) { + rate = clk_set_rate(&clk, 125000000); + if (rate != 125000000) + return -EINVAL; + } + break; + default: debug("NO interface defined!\n"); return -ENXIO;