From: Heiko Schocher Date: Mon, 30 Nov 2020 19:46:02 +0000 (+0100) Subject: imx6: remove not longer supported aristainetos boards X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=3cf02f5ffa4f85c3934495cddae1f39bc61314b6;p=u-boot.git imx6: remove not longer supported aristainetos boards Removed aristainetos2, 2b, 2b-csl. This boards have been recalled and destroyed. Adapt board code to remove stuff not needed anymore. Fix checkpatch warning, remove fdt_high and initrd_high from default environment. Signed-off-by: Heiko Schocher zu remove --- diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index e2e8a5fb7a..457ccfe08f 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -643,13 +643,6 @@ dtb-$(CONFIG_MX53) += imx53-cx9020.dtb \ ifneq ($(CONFIG_MX6DL)$(CONFIG_MX6QDL)$(CONFIG_MX6S),) dtb-y += \ - imx6dl-aristainetos2_4.dtb \ - imx6dl-aristainetos2_7.dtb \ - imx6dl-aristainetos2b_4.dtb \ - imx6dl-aristainetos2b_7.dtb \ - imx6dl-aristainetos2b_csl_4.dtb \ - imx6dl-aristainetos2b_csl_7.dtb \ - imx6dl-aristainetos2c_4.dtb \ imx6dl-aristainetos2c_7.dtb \ imx6dl-brppt2.dtb \ imx6dl-cubox-i.dtb \ diff --git a/arch/arm/dts/imx6dl-aristainetos2_4-u-boot.dtsi b/arch/arm/dts/imx6dl-aristainetos2_4-u-boot.dtsi deleted file mode 100644 index ac7052c7b7..0000000000 --- a/arch/arm/dts/imx6dl-aristainetos2_4-u-boot.dtsi +++ /dev/null @@ -1,13 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (C) 2019 Heiko Schocher - */ - -#include - -&lcd_panel { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ipu_disp>; - enable-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>; - backlight = <&backlight>; -}; diff --git a/arch/arm/dts/imx6dl-aristainetos2_4.dts b/arch/arm/dts/imx6dl-aristainetos2_4.dts deleted file mode 100644 index 0157e244ae..0000000000 --- a/arch/arm/dts/imx6dl-aristainetos2_4.dts +++ /dev/null @@ -1,51 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0) -/* - * support for the imx6 based aristainetos2 board - * parts for 4.3 inch LG display on spi1 port0 - * - * Copyright (C) 2019 Heiko Schocher - * Copyright (C) 2015 Heiko Schocher - * - */ -/dts-v1/; - -#include "imx6dl-aristainetos2_4.dtsi" -#include "imx6qdl-aristainetos2.dtsi" - -/ { - model = "aristainetos2 i.MX6 Dual Lite Board 4"; - compatible = "fsl,imx6dl"; - -}; - -&ecspi1 { - lcd_panel: display@0 { - compatible = "lg,lg4573"; - spi-max-frequency = <10000000>; - reg = <0>; - power-on-delay = <10>; - - display-timings { - 480x800p57 { - native-mode; - clock-frequency = <27000027>; - hactive = <480>; - vactive = <800>; - hfront-porch = <10>; - hback-porch = <59>; - hsync-len = <10>; - vback-porch = <15>; - vfront-porch = <15>; - vsync-len = <15>; - hsync-active = <1>; - vsync-active = <1>; - }; - }; - - port { - panel_in: endpoint { - remote-endpoint = <&display_out>; - }; - }; - }; -}; diff --git a/arch/arm/dts/imx6dl-aristainetos2_4.dtsi b/arch/arm/dts/imx6dl-aristainetos2_4.dtsi deleted file mode 100644 index be4601b4b2..0000000000 --- a/arch/arm/dts/imx6dl-aristainetos2_4.dtsi +++ /dev/null @@ -1,84 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0) -/* - * support for the imx6 based aristainetos2 board - * parts for 4.3 inch LG display on the parallel port and atmel maxtouch - * - * Copyright (C) 2019 Heiko Schocher - * Copyright (C) 2015 Heiko Schocher - * - */ -/dts-v1/; -#include "imx6dl.dtsi" - -/ { - display0: disp0 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx-parallel-display"; - interface-pix-fmt = "rgb24"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ipu_disp>; - - port@0 { - reg = <0>; - display0_in: endpoint { - remote-endpoint = <&ipu1_di0_disp0>; - }; - }; - - port@1 { - reg = <1>; - display_out: endpoint { - remote-endpoint = <&panel_in>; - }; - }; - }; -}; - -&i2c3 { - touch: touch@4b { - compatible = "atmel,maxtouch"; - reg = <0x4b>; - interrupt-parent = <&gpio2>; - interrupts = <9 8>; - }; -}; - -&ipu1_di0_disp0 { - remote-endpoint = <&display0_in>; -}; - -&iomuxc { - pinctrl_ipu_disp: ipudisp1grp { - fsl,pins = < - MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x31 - MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0xE1 - MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 - MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 - MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0xE1 - MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0xE1 - MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0xE1 - MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0xE1 - MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0xE1 - MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0xE1 - MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0xE1 - MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0xE1 - MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0xE1 - MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0xE1 - MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0xE1 - MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0xE1 - MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0xE1 - MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0xE1 - MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0xe1 - MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0xE1 - MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0xE1 - MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0xE1 - MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0xE1 - MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0xE1 - MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0xE1 - MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0xE1 - MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0xE1 - MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0xE1 - >; - }; -}; diff --git a/arch/arm/dts/imx6dl-aristainetos2_7-u-boot.dtsi b/arch/arm/dts/imx6dl-aristainetos2_7-u-boot.dtsi deleted file mode 100644 index 25bc562064..0000000000 --- a/arch/arm/dts/imx6dl-aristainetos2_7-u-boot.dtsi +++ /dev/null @@ -1,19 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (C) 2019 Heiko Schocher - */ - -#include -/ { - vdd_panel_reg: regulator-panel { - compatible = "regulator-fixed"; - regulator-name = "panel_regulator"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; -}; - -&panel0 { - power-supply = <&vdd_panel_reg>; -}; diff --git a/arch/arm/dts/imx6dl-aristainetos2_7.dts b/arch/arm/dts/imx6dl-aristainetos2_7.dts deleted file mode 100644 index 0d1e83cb68..0000000000 --- a/arch/arm/dts/imx6dl-aristainetos2_7.dts +++ /dev/null @@ -1,16 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0) -/* - * support for the imx6 based aristainetos2 board - * - * Copyright (C) 2019 Heiko Schocher - * Copyright (C) 2015 Heiko Schocher - * - */ -/dts-v1/; -#include "imx6dl-aristainetos2_7.dtsi" -#include "imx6qdl-aristainetos2.dtsi" - -/ { - model = "aristainetos2 i.MX6 Dual Lite Board 7"; - compatible = "fsl,imx6dl"; -}; diff --git a/arch/arm/dts/imx6dl-aristainetos2_7.dtsi b/arch/arm/dts/imx6dl-aristainetos2_7.dtsi index 52d6a517a7..ec633b8ed1 100644 --- a/arch/arm/dts/imx6dl-aristainetos2_7.dtsi +++ b/arch/arm/dts/imx6dl-aristainetos2_7.dtsi @@ -1,7 +1,7 @@ // SPDX-License-Identifier: (GPL-2.0) /* * support for the imx6 based aristainetos2 board - * parts for 7 inch LG display connected to the LVDS port and atmel maxtouch + * parts for 7 inch LG display connected to the LVDS port * * Copyright (C) 2019 Heiko Schocher * Copyright (C) 2015 Heiko Schocher @@ -26,15 +26,6 @@ }; }; -&i2c3 { - touch: touch@4d { - compatible = "atmel,maxtouch"; - reg = <0x4d>; - interrupt-parent = <&gpio2>; - interrupts = <9 8>; - }; -}; - &ldb { status = "okay"; diff --git a/arch/arm/dts/imx6dl-aristainetos2b_4-u-boot.dtsi b/arch/arm/dts/imx6dl-aristainetos2b_4-u-boot.dtsi deleted file mode 100644 index ee02df39c1..0000000000 --- a/arch/arm/dts/imx6dl-aristainetos2b_4-u-boot.dtsi +++ /dev/null @@ -1,13 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ or X11 -/* - * Copyright (C) 2019 Heiko Schocher - */ - -#include - -&lcd_panel { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ipu_disp>; - enable-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>; - backlight = <&backlight>; -}; diff --git a/arch/arm/dts/imx6dl-aristainetos2b_4.dts b/arch/arm/dts/imx6dl-aristainetos2b_4.dts deleted file mode 100644 index a48a25c119..0000000000 --- a/arch/arm/dts/imx6dl-aristainetos2b_4.dts +++ /dev/null @@ -1,50 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0) -/* - * support for the imx6 based aristainetos2b board - * parts for 4.3 inch LG display on spi1 port1 - * - * Copyright (C) 2019 Heiko Schocher - * - */ -/dts-v1/; - -#include "imx6dl-aristainetos2_4.dtsi" -#include "imx6qdl-aristainetos2b.dtsi" - -/ { - model = "aristainetos2b i.MX6 Dual Lite Board 4"; - compatible = "fsl,imx6dl"; - -}; - -&ecspi1 { - lcd_panel: display@0 { - compatible = "lg,lg4573"; - spi-max-frequency = <10000000>; - reg = <1>; - power-on-delay = <10>; - - display-timings { - 480x800p57 { - native-mode; - clock-frequency = <27000027>; - hactive = <480>; - vactive = <800>; - hfront-porch = <10>; - hback-porch = <59>; - hsync-len = <10>; - vback-porch = <15>; - vfront-porch = <15>; - vsync-len = <15>; - hsync-active = <1>; - vsync-active = <1>; - }; - }; - - port { - panel_in: endpoint { - remote-endpoint = <&display_out>; - }; - }; - }; -}; diff --git a/arch/arm/dts/imx6dl-aristainetos2b_7-u-boot.dtsi b/arch/arm/dts/imx6dl-aristainetos2b_7-u-boot.dtsi deleted file mode 100644 index 0cb4f1974b..0000000000 --- a/arch/arm/dts/imx6dl-aristainetos2b_7-u-boot.dtsi +++ /dev/null @@ -1,19 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ or X11 -/* - * Copyright (C) 2019 Heiko Schocher - */ - -#include -/ { - vdd_panel_reg: regulator-panel { - compatible = "regulator-fixed"; - regulator-name = "panel_regulator"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; -}; - -&panel0 { - power-supply = <&vdd_panel_reg>; -}; diff --git a/arch/arm/dts/imx6dl-aristainetos2b_7.dts b/arch/arm/dts/imx6dl-aristainetos2b_7.dts deleted file mode 100644 index f1496cbfdd..0000000000 --- a/arch/arm/dts/imx6dl-aristainetos2b_7.dts +++ /dev/null @@ -1,16 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0) -/* - * support for the imx6 based aristainetos2 board - * - * Copyright (C) 2019 Heiko Schocher - * Copyright (C) 2015 Heiko Schocher - * - */ -/dts-v1/; -#include "imx6dl-aristainetos2_7.dtsi" -#include "imx6qdl-aristainetos2b.dtsi" - -/ { - model = "aristainetos2b i.MX6 Dual Lite Board 7"; - compatible = "fsl,imx6dl"; -}; diff --git a/arch/arm/dts/imx6dl-aristainetos2b_csl_4-u-boot.dtsi b/arch/arm/dts/imx6dl-aristainetos2b_csl_4-u-boot.dtsi deleted file mode 100644 index 654ac122a1..0000000000 --- a/arch/arm/dts/imx6dl-aristainetos2b_csl_4-u-boot.dtsi +++ /dev/null @@ -1,13 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ or X11 -/* - * Copyright (C) 2019 Heiko Schocher - */ - -#include - -&lcd_panel { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ipu_disp>; - enable-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>; - backlight = <&backlight>; -}; diff --git a/arch/arm/dts/imx6dl-aristainetos2b_csl_4.dts b/arch/arm/dts/imx6dl-aristainetos2b_csl_4.dts deleted file mode 100644 index bfbb799f20..0000000000 --- a/arch/arm/dts/imx6dl-aristainetos2b_csl_4.dts +++ /dev/null @@ -1,50 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0) -/* - * support for the imx6 based aristainetos2b csl board - * parts for 4.3 inch LG display on spi1 port1 - * - * Copyright (C) 2019 Heiko Schocher - * - */ -/dts-v1/; - -#include "imx6dl-aristainetos2_4.dtsi" -#include "imx6qdl-aristainetos2b_csl.dtsi" - -/ { - model = "aristainetos2b csl i.MX6 Dual Lite Board 4"; - compatible = "fsl,imx6dl"; - -}; - -&ecspi1 { - lcd_panel: display@0 { - compatible = "lg,lg4573"; - spi-max-frequency = <10000000>; - reg = <1>; - power-on-delay = <10>; - - display-timings { - 480x800p57 { - native-mode; - clock-frequency = <27000027>; - hactive = <480>; - vactive = <800>; - hfront-porch = <10>; - hback-porch = <59>; - hsync-len = <10>; - vback-porch = <15>; - vfront-porch = <15>; - vsync-len = <15>; - hsync-active = <1>; - vsync-active = <1>; - }; - }; - - port { - panel_in: endpoint { - remote-endpoint = <&display_out>; - }; - }; - }; -}; diff --git a/arch/arm/dts/imx6dl-aristainetos2b_csl_7-u-boot.dtsi b/arch/arm/dts/imx6dl-aristainetos2b_csl_7-u-boot.dtsi deleted file mode 100644 index 70d195ecbf..0000000000 --- a/arch/arm/dts/imx6dl-aristainetos2b_csl_7-u-boot.dtsi +++ /dev/null @@ -1,19 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ or X11 -/* - * Copyright (C) 2019 Heiko Schocher - */ - -#include -/ { - vdd_panel_reg: regulator-panel { - compatible = "regulator-fixed"; - regulator-name = "panel_regulator"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; -}; - -&panel0 { - power-supply = <&vdd_panel_reg>; -}; diff --git a/arch/arm/dts/imx6dl-aristainetos2b_csl_7.dts b/arch/arm/dts/imx6dl-aristainetos2b_csl_7.dts deleted file mode 100644 index ecf767da6c..0000000000 --- a/arch/arm/dts/imx6dl-aristainetos2b_csl_7.dts +++ /dev/null @@ -1,16 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0) -/* - * support for the imx6 based aristainetos2 board - * - * Copyright (C) 2019 Heiko Schocher - * Copyright (C) 2015 Heiko Schocher - * - */ -/dts-v1/; -#include "imx6dl-aristainetos2_7.dtsi" -#include "imx6qdl-aristainetos2b_csl.dtsi" - -/ { - model = "aristainetos2b csl i.MX6 Dual Lite Board 7"; - compatible = "fsl,imx6dl"; -}; diff --git a/arch/arm/dts/imx6dl-aristainetos2c_4-u-boot.dtsi b/arch/arm/dts/imx6dl-aristainetos2c_4-u-boot.dtsi deleted file mode 100644 index 052d51852b..0000000000 --- a/arch/arm/dts/imx6dl-aristainetos2c_4-u-boot.dtsi +++ /dev/null @@ -1,13 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ or X11 -/* - * Copyright (C) 2019 Heiko Schocher - */ - -#include - -&lcd_panel { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ipu_disp>; - enable-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>; - backlight = <&backlight>; -}; diff --git a/arch/arm/dts/imx6dl-aristainetos2c_4.dts b/arch/arm/dts/imx6dl-aristainetos2c_4.dts deleted file mode 100644 index 142b108ace..0000000000 --- a/arch/arm/dts/imx6dl-aristainetos2c_4.dts +++ /dev/null @@ -1,50 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0) -/* - * support for the imx6 based aristainetos2c board - * parts for 4.3 inch LG display on spi1 port1 - * - * Copyright (C) 2019 Heiko Schocher - * - */ -/dts-v1/; - -#include "imx6dl-aristainetos2_4.dtsi" -#include "imx6qdl-aristainetos2c.dtsi" - -/ { - model = "aristainetos2c i.MX6 Dual Lite Board 4"; - compatible = "fsl,imx6dl"; - -}; - -&ecspi1 { - lcd_panel: display@0 { - compatible = "lg,lg4573"; - spi-max-frequency = <10000000>; - reg = <1>; - power-on-delay = <10>; - - display-timings { - 480x800p57 { - native-mode; - clock-frequency = <27000027>; - hactive = <480>; - vactive = <800>; - hfront-porch = <10>; - hback-porch = <59>; - hsync-len = <10>; - vback-porch = <15>; - vfront-porch = <15>; - vsync-len = <15>; - hsync-active = <1>; - vsync-active = <1>; - }; - }; - - port { - panel_in: endpoint { - remote-endpoint = <&display_out>; - }; - }; - }; -}; diff --git a/arch/arm/dts/imx6dl-aristainetos2c_7.dts b/arch/arm/dts/imx6dl-aristainetos2c_7.dts index 35435e1c10..00eec82bf4 100644 --- a/arch/arm/dts/imx6dl-aristainetos2c_7.dts +++ b/arch/arm/dts/imx6dl-aristainetos2c_7.dts @@ -11,6 +11,6 @@ #include "imx6qdl-aristainetos2c.dtsi" / { - model = "aristainetos2c i.MX6 Dual Lite Board 7"; + model = "aristainetos2c+2d i.MX6 Dual Lite Boards 7"; compatible = "fsl,imx6dl"; }; diff --git a/arch/arm/dts/imx6qdl-aristainetos2-common.dtsi b/arch/arm/dts/imx6qdl-aristainetos2-common.dtsi index 2aa531b1ab..570143694e 100644 --- a/arch/arm/dts/imx6qdl-aristainetos2-common.dtsi +++ b/arch/arm/dts/imx6qdl-aristainetos2-common.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: (GPL-2.0) /* - * support for the imx6 based aristainetos2 board + * support for the imx6 based aristainetos2 boards * parts common to all versions * * Copyright (C) 2019 Heiko Schocher @@ -13,6 +13,8 @@ / { aliases { eeprom0 = &i2c_eeprom0; + eeprom1 = &i2c_eeprom1; + eeprom2 = &i2c_eeprom2; pmic0 = &i2c_pmic0; }; @@ -250,6 +252,12 @@ }; }; + i2c_eeprom2: eeprom@57{ + compatible = "atmel,24c64"; + reg = <0x57>; + pagesize = <32>; + }; + rtc@68 { compatible = "st,m41t11"; reg = <0x68>; @@ -274,6 +282,19 @@ }; }; +&gpio2 { + tpm_pp { + gpio-hog; + output-low; + gpios = <17 GPIO_ACTIVE_HIGH>; + }; + tpm_reset { + gpio-hog; + output-high; + gpios = <18 GPIO_ACTIVE_HIGH>; + }; +}; + &gpio6 { spi_bus_ena { gpio-hog; diff --git a/arch/arm/dts/imx6qdl-aristainetos2-u-boot.dtsi b/arch/arm/dts/imx6qdl-aristainetos2-u-boot.dtsi index c713efd84c..3063f01d70 100644 --- a/arch/arm/dts/imx6qdl-aristainetos2-u-boot.dtsi +++ b/arch/arm/dts/imx6qdl-aristainetos2-u-boot.dtsi @@ -50,28 +50,6 @@ }; }; -&iomuxc { - pinctrl-0 = <&pinctrl_gpio &pinctrl_gpio_fix>; - u-boot,dm-pre-reloc; - - pinctrl_gpio_fix: gpiofixgrp { - /* - * usdhc2 has a levelshifter on the carrier board Rev. DV1, - * that will automatically detect the driving direction. - * During initialisation this isn't working correctly, - * which causes DAT3 to be driven low towards the SD-card. - * This causes a SD-card enetring the SPI-Mode - * and therefore getting inaccessible until next power cycle. - * As workaround we drive the DAT3 line as GPIO and set it high. - * This makes usdhc2 unusable in u-boot, but works for the - * initialisation in Linux - */ - fsl,pins = < - MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x20000 - >; - }; -}; - &gpio1 { usdhc_fix { gpio-hog; diff --git a/arch/arm/dts/imx6qdl-aristainetos2.dtsi b/arch/arm/dts/imx6qdl-aristainetos2.dtsi deleted file mode 100644 index 788e13edad..0000000000 --- a/arch/arm/dts/imx6qdl-aristainetos2.dtsi +++ /dev/null @@ -1,244 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0) -/* - * support for the imx6 based aristainetos2 board - * - * Copyright (C) 2019 Heiko Schocher - * Copyright (C) 2015 Heiko Schocher - * - */ -#include -#include - -#include "imx6qdl-aristainetos2-common.dtsi" - -/ { - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio>; - - LED_blue { - label = "led_blue"; - gpios = <&gpio2 29 GPIO_ACTIVE_LOW>; - }; - - LED_green { - label = "led_green"; - gpios = <&gpio5 4 GPIO_ACTIVE_LOW>; - }; - - LED_red { - label = "led_red"; - gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; - }; - - LED_yellow { - label = "led_yellow"; - gpios = <&gpio6 16 GPIO_ACTIVE_LOW>; - }; - - LED_ena { - label = "led_ena"; - gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&ecspi1 { - fsl,spi-num-chipselects = <3>; - cs-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH - &gpio4 10 GPIO_ACTIVE_HIGH - &gpio4 11 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi1>; - status = "okay"; -}; - -&ecspi4 { - fsl,spi-num-chipselects = <2>; - cs-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH &gpio5 2 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi4>; - status = "okay"; - pinctrl-assert-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>; - - flash: m25p80@1 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "micron,n25q128a11", "jedec,spi-nor"; - spi-max-frequency = <20000000>; - reg = <1>; - }; -}; - -&gpio7 { - sd2_driver_ena { - gpio-hog; - output-high; - gpios = <8 GPIO_ACTIVE_HIGH>; - }; -}; - -&gpmi { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpmi_nand>; - status = "okay"; -}; - -&can1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flexcan1>; - status = "okay"; -}; - -&can2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flexcan2>; - status = "okay"; -}; - -&usdhc1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc1>; - cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; - no-1-8-v; - status = "okay"; -}; - -&usdhc2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc2>; - cd-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; - no-1-8-v; - status = "okay"; -}; - -&iomuxc { - pinctrl_ecspi1: ecspi1grp { - fsl,pins = < - MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 - MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 - MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 - MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x100b1 /* SS0# */ - MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x100b1 /* SS1# */ - MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x100b1 /* SS2# */ - >; - }; - - pinctrl_ecspi4: ecspi4grp { - fsl,pins = < - MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1 - MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1 - MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1 - MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x100b1 /* SS0# */ - MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x100b1 /* SS1# */ - MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x4001b0b0 /* WP pin */ - >; - }; - - pinctrl_gpio: gpiogrp { - fsl,pins = < - /* led enable */ - MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x4001b0b0 - /* LCD power enable */ - MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x4001b0b0 - /* led yellow */ - MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x4001b0b0 - /* led red */ - MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x4001b0b0 - /* led green */ - MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x4001b0b0 - /* led blue */ - MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x4001b0b0 - /* Profibus IRQ */ - MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 - /* FPGA IRQ currently unused*/ - MX6QDL_PAD_SD3_DAT6__GPIO6_IO18 0x1b0b0 - /* Display reset because of clock failure */ - MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x4001b0b0 - /* spi bus #2 SS driver enable */ - MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x4001b0b0 - /* RST_LOC# PHY reset input (has pull-down!)*/ - MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x4001b0b0 - /* USB_OTG_ID = GPIO1_24*/ - MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x4001b0b0 - /* Touchscreen IRQ */ - MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x1b0b0 - /* PCIe reset */ - MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x4001b0b0 - >; - }; - - pinctrl_gpmi_nand: gpmi-nand { - fsl,pins = < - MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 - MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 - MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 - MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 - MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 - MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 - MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 - MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 - MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 - MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 - MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 - MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 - MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 - MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 - MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 - >; - }; - - pinctrl_flexcan1: flexcan1grp { - fsl,pins = < - MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x1b0b0 - MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x1b0b0 - >; - }; - - pinctrl_flexcan2: flexcan2grp { - fsl,pins = < - MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX 0x1b0b0 - MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX 0x1b0b0 - >; - }; - - pinctrl_usbotg: usbotggrp { - fsl,pins = < - MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 - >; - }; - - pinctrl_usdhc1: usdhc1grp { - fsl,pins = < - MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059 - MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059 - MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059 - MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059 - MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059 - MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059 - /* SD1 card detect input */ - MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x1b0b0 - /* SD1 write protect input */ - MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x1b0b0 - >; - }; - - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX6QDL_PAD_SD2_CMD__SD2_CMD 0x71 - MX6QDL_PAD_SD2_CLK__SD2_CLK 0x71 - MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x71 - MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x71 - MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x71 - MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x71 - /* SD2 level shifter output enable */ - MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x4001b0b0 - /* SD2 card detect input */ - MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 - /* SD2 write protect input */ - MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0 - >; - }; -}; diff --git a/arch/arm/dts/imx6qdl-aristainetos2b-u-boot.dtsi b/arch/arm/dts/imx6qdl-aristainetos2b-u-boot.dtsi deleted file mode 100644 index 88826a2634..0000000000 --- a/arch/arm/dts/imx6qdl-aristainetos2b-u-boot.dtsi +++ /dev/null @@ -1,77 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ or X11 -/* - * Copyright (C) 2019 Heiko Schocher - */ - -/ { - chosen { - u-boot,dm-pre-reloc; - stdout-path = &uart2; - }; - - wdt-reboot { - compatible = "wdt-reboot"; - wdt = <&wdog1>; - }; -}; - -&uart2 { - u-boot,dm-pre-reloc; -}; - -&pinctrl_gpio { - u-boot,dm-pre-reloc; -}; - -&pinctrl_uart2 { - u-boot,dm-pre-reloc; -}; - -&iomuxc { - u-boot,dm-pre-reloc; -}; - -&aips2 { - u-boot,dm-pre-reloc; -}; - -&backlight { - pwms = <&pwm1 0 300000>; - default-brightness-level = <2>; -}; - -/* - * allow switching write protect / reset pin by gpio, - * because "pinctrl-assert-gpios" from &ecspi1 isn't handled by u-boot - */ -&gpio2 { - u-boot,dm-pre-reloc; - - wp_spi_nor { - gpio-hog; - output-high; - gpios = <15 GPIO_ACTIVE_HIGH>; - }; - - reset_spi_nor { - gpio-hog; - output-high; - gpios = <28 GPIO_ACTIVE_HIGH>; - }; -}; - -&gpio4 { - u-boot,dm-pre-reloc; -}; - -&ecspi1 { - u-boot,dm-pre-reloc; -}; - -&flash { - u-boot,dm-pre-reloc; -}; - -&pinctrl_ecspi1 { - u-boot,dm-pre-reloc; -}; diff --git a/arch/arm/dts/imx6qdl-aristainetos2b.dtsi b/arch/arm/dts/imx6qdl-aristainetos2b.dtsi deleted file mode 100644 index 7d92ea2af7..0000000000 --- a/arch/arm/dts/imx6qdl-aristainetos2b.dtsi +++ /dev/null @@ -1,266 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0) -/* - * support for the imx6 based aristainetos2b board - * - * Copyright (C) 2019 Heiko Schocher - * Copyright (C) 2015 Heiko Schocher - * - */ -#include -#include - -#include "imx6qdl-aristainetos2-common.dtsi" - -/ { - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio>; - - LED_blue { - label = "led_blue"; - gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; - }; - - LED_green { - label = "led_green"; - gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>; - }; - - LED_red { - label = "led_red"; - gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>; - }; - - LED_yellow { - label = "led_yellow"; - gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>; - }; - - LED_ena { - label = "led_ena"; - gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&ecspi1 { - fsl,spi-num-chipselects = <3>; - cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH - &gpio4 10 GPIO_ACTIVE_HIGH - &gpio4 11 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi1>; - status = "okay"; - pinctrl-assert-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>; - pinctrl-assert-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>; - - flash: m25p80@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "micron,n25q128a11", "jedec,spi-nor"; - spi-max-frequency = <20000000>; - reg = <0>; - }; -}; - -&ecspi4 { - fsl,spi-num-chipselects = <2>; - cs-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH &gpio5 2 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi4>; - status = "okay"; -}; - -&i2c1 { - tpm@20 { - compatible = "infineon,slb9645tt"; - reg = <0x20>; - }; -}; - -&gpio7 { - sd2_driver_ena { - gpio-hog; - output-high; - gpios = <8 GPIO_ACTIVE_HIGH>; - }; -}; - -&gpmi { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpmi_nand>; - status = "okay"; -}; - -&can1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flexcan1>; - status = "okay"; -}; - -&can2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flexcan2>; - status = "okay"; -}; - -&usdhc1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc1>; - cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio4 20 GPIO_ACTIVE_HIGH>; - no-1-8-v; - status = "okay"; -}; - -&usdhc2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc2>; - /* - * comment out this line to make the WiFi Eval-Module work in - * SD-Slot2, and add line: - * broken-cd; - * causes 6% CPU load if no WiFi module installed (polling) - */ - cd-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; - no-1-8-v; - status = "okay"; -}; - -&iomuxc { - pinctrl_ecspi1: ecspi1grp { - fsl,pins = < - MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 - MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 - MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 - /* SS0# */ - MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x100b1 - /* SS1# */ - MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x100b1 - /* SS2# */ - MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x100b1 - /* WP pin NOR Flash */ - MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x4001b0b0 - /* Flash nReset */ - MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x4001b0b0 - >; - }; - - pinctrl_ecspi4: ecspi4grp { - fsl,pins = < - MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1 - MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1 - MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1 - MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x100b1 /* SS0# */ - MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x100b1 /* SS1# */ - >; - }; - - pinctrl_gpio: gpiogrp { - fsl,pins = < - /* led enable */ - MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x4001b0b0 - /* LCD power enable */ - MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x4001b0b0 - /* led yellow */ - MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x4001b0b0 - /* led red */ - MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x4001b0b0 - /* led green */ - MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x4001b0b0 - /* led blue */ - MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x4001b0b0 - /* Profibus IRQ */ - MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 - /* FPGA IRQ currently unused*/ - MX6QDL_PAD_SD3_DAT6__GPIO6_IO18 0x1b0b0 - /* Display reset because of clock failure */ - MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x4001b0b0 - /* spi bus #2 SS driver enable */ - MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x4001b0b0 - /* RST_LOC# PHY reset input (has pull-down!)*/ - MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x4001b0b0 - /* Touchscreen IRQ */ - MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x1b0b0 - /* PCIe reset */ - MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x4001b0b0 - /* make sure pin is GPIO and not ENET_REF_CLK */ - MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x4001a0b0 - /* SD2 level shifter output enable / SD2 Reset# */ - MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x4001b0b0 - >; - }; - - pinctrl_gpmi_nand: gpmi-nand { - fsl,pins = < - MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 - MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 - MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 - MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 - MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 - MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 - MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 - MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 - MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 - MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 - MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 - MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 - MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 - MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 - MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 - >; - }; - - pinctrl_flexcan1: flexcan1grp { - fsl,pins = < - MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x1b0b0 - MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x1b0b0 - >; - }; - - pinctrl_flexcan2: flexcan2grp { - fsl,pins = < - MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX 0x1b0b0 - MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX 0x1b0b0 - >; - }; - - pinctrl_usbotg: usbotggrp { - fsl,pins = < - MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 - MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0 - >; - }; - - pinctrl_usdhc1: usdhc1grp { - fsl,pins = < - MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059 - MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059 - MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059 - MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059 - MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059 - MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059 - /* SD1 card detect input */ - MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x1b0b0 - /* SD1 write protect input */ - MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x1b0b0 - >; - }; - - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX6QDL_PAD_SD2_CMD__SD2_CMD 0x71 - MX6QDL_PAD_SD2_CLK__SD2_CLK 0x71 - MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x71 - MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x71 - MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x71 - MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x71 - /* SD2 card detect input */ - MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 - /* SD2 write protect input */ - MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0 - >; - }; -}; diff --git a/arch/arm/dts/imx6qdl-aristainetos2b_csl-u-boot.dtsi b/arch/arm/dts/imx6qdl-aristainetos2b_csl-u-boot.dtsi deleted file mode 100644 index 8c2ed70075..0000000000 --- a/arch/arm/dts/imx6qdl-aristainetos2b_csl-u-boot.dtsi +++ /dev/null @@ -1,77 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ or X11 -/* - * Copyright (C) 2019 Heiko Schocher - */ - -/ { - chosen { - u-boot,dm-pre-reloc; - stdout-path = &uart1; - }; - - wdt-reboot { - compatible = "wdt-reboot"; - wdt = <&wdog1>; - }; -}; - -&uart1 { - u-boot,dm-pre-reloc; -}; - -&pinctrl_gpio { - u-boot,dm-pre-reloc; -}; - -&pinctrl_uart1 { - u-boot,dm-pre-reloc; -}; - -&iomuxc { - u-boot,dm-pre-reloc; -}; - -&aips1 { - u-boot,dm-pre-reloc; -}; - -&backlight { - pwms = <&pwm1 0 300000>; - default-brightness-level = <2>; -}; - -/* - * allow switching write protect / reset pin by gpio, - * because "pinctrl-assert-gpios" from &ecspi1 isn't handled by u-boot - */ -&gpio2 { - u-boot,dm-pre-reloc; - - wp_spi_nor { - gpio-hog; - output-high; - gpios = <15 GPIO_ACTIVE_HIGH>; - }; - - reset_spi_nor { - gpio-hog; - output-high; - gpios = <28 GPIO_ACTIVE_HIGH>; - }; -}; - -&gpio4 { - u-boot,dm-pre-reloc; -}; - -&ecspi1 { - u-boot,dm-pre-reloc; -}; - -&flash { - u-boot,dm-pre-reloc; -}; - -&pinctrl_ecspi1 { - u-boot,dm-pre-reloc; -}; diff --git a/arch/arm/dts/imx6qdl-aristainetos2b_csl.dtsi b/arch/arm/dts/imx6qdl-aristainetos2b_csl.dtsi deleted file mode 100644 index fa4dadefb6..0000000000 --- a/arch/arm/dts/imx6qdl-aristainetos2b_csl.dtsi +++ /dev/null @@ -1,248 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0) -/* - * support for the imx6 based aristainetos2b-csl board - * - * Copyright (C) 2019 Heiko Schocher - * Copyright (C) 2015 Heiko Schocher - * - */ -#include -#include - -#include "imx6qdl-aristainetos2-common.dtsi" - -/ { - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio>; - - LED_blue { - label = "led_blue"; - gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; - }; - - LED_green { - label = "led_green"; - gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>; - }; - - LED_red { - label = "led_red"; - gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>; - }; - - LED_yellow { - label = "led_yellow"; - gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>; - }; - - LED_blue_2 { - label = "led_blue2"; - gpios = <&expander 15 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - - LED_green_2 { - label = "led_green2"; - gpios = <&expander 14 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - - LED_red_2 { - label = "led_red2"; - gpios = <&expander 12 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - - LED_yellow_2 { - label = "led_yellow2"; - gpios = <&expander 13 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - - LED_ena { - label = "led_ena"; - gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&ecspi1 { - fsl,spi-num-chipselects = <3>; - cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH - &gpio4 10 GPIO_ACTIVE_HIGH - &gpio4 11 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi1>; - status = "okay"; - pinctrl-assert-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>; - pinctrl-assert-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>; - - flash: m25p80@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "micron,n25q128a11", "jedec,spi-nor"; - spi-max-frequency = <20000000>; - reg = <0>; - }; -}; - -&ecspi4 { - fsl,spi-num-chipselects = <2>; - cs-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH &gpio5 2 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi4>; - status = "okay"; -}; - -&i2c1 { - tpm@20 { - compatible = "infineon,slb9645tt"; - reg = <0x20>; - }; -}; - -&gpio7 { - wlan_reset { - gpio-hog; - output-high; - gpios = <8 GPIO_ACTIVE_HIGH>; - }; -}; - -&gpmi { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpmi_nand>; - status = "okay"; -}; - -&usdhc1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc1>; - cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; - status = "okay"; -}; - -&usdhc2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc2>; - no-1-8-v; - status = "okay"; -}; - -&iomuxc { - pinctrl_ecspi1: ecspi1grp { - fsl,pins = < - MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 - MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 - MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 - /* SS0# */ - MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x100b1 - /* SS1# */ - MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x100b1 - /* SS2# */ - MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x100b1 - /* WP pin NOR Flash */ - MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x4001b0b0 - /* Flash nReset */ - MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x4001b0b0 - >; - }; - - pinctrl_ecspi4: ecspi4grp { - fsl,pins = < - MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1 - MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1 - MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1 - MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x100b1 /* SS0# */ - MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x100b1 /* SS1# */ - >; - }; - - pinctrl_gpio: gpiogrp { - fsl,pins = < - /* led enable */ - MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x4001b0b0 - /* LCD power enable */ - MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x4001b0b0 - /* led yellow */ - MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x4001b0b0 - /* led red */ - MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x4001b0b0 - /* led green */ - MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x4001b0b0 - /* led blue */ - MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x4001b0b0 - /* Profibus IRQ */ - MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 - /* FPGA IRQ currently unused*/ - MX6QDL_PAD_SD3_DAT6__GPIO6_IO18 0x1b0b0 - /* Display reset because of clock failure */ - MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x4001b0b0 - /* spi bus #2 SS driver enable */ - MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x4001b0b0 - /* RST_LOC# PHY reset input (has pull-down!)*/ - MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x4001b0b0 - /* Touchscreen IRQ */ - MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x1b0b0 - /* PCIe reset */ - MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x4001b0b0 - /* make sure pin is GPIO and not ENET_REF_CLK */ - MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x4001a0b0 - /* WLAN Module Reset# */ - MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x4001b0b0 - >; - }; - - pinctrl_gpmi_nand: gpmi-nand { - fsl,pins = < - MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 - MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 - MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 - MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 - MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 - MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 - MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 - MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 - MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 - MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 - MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 - MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 - MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 - MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 - MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 - >; - }; - - pinctrl_usbotg: usbotggrp { - fsl,pins = < - MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 - MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0 - >; - }; - - pinctrl_usdhc1: usdhc1grp { - fsl,pins = < - MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059 - MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059 - MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059 - MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059 - MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059 - MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059 - /* SD1 card detect input */ - MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x1b0b0 - >; - }; - - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX6QDL_PAD_SD2_CMD__SD2_CMD 0x71 - MX6QDL_PAD_SD2_CLK__SD2_CLK 0x71 - MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x71 - MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x71 - MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x71 - MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x71 - >; - }; -}; diff --git a/arch/arm/dts/imx6qdl-aristainetos2c.dtsi b/arch/arm/dts/imx6qdl-aristainetos2c.dtsi index ba13d55f41..70c0177d29 100644 --- a/arch/arm/dts/imx6qdl-aristainetos2c.dtsi +++ b/arch/arm/dts/imx6qdl-aristainetos2c.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: (GPL-2.0) /* - * support for the imx6 based aristainetos2c board + * support for the imx6 based aristainetos2c+2d boards * * Copyright (C) 2019 Heiko Schocher * Copyright (C) 2015 Heiko Schocher @@ -79,6 +79,14 @@ }; }; +&gpio7 { + eMMC_reset { + gpio-hog; + output-high; + gpios = <8 GPIO_ACTIVE_HIGH>; + }; +}; + &can1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flexcan1>; @@ -172,6 +180,8 @@ MX6QDL_PAD_EIM_A21__GPIO2_IO17 0x4001b0b0 /* TPM Reset */ MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x4001b0b0 + /* eMMC Reset# */ + MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x4001b0b0 >; }; diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig index 0646b7369c..9d6c344064 100644 --- a/arch/arm/mach-imx/mx6/Kconfig +++ b/arch/arm/mach-imx/mx6/Kconfig @@ -128,39 +128,6 @@ config TARGET_APALIS_IMX6 imply CMD_DM imply CMD_SATA -config TARGET_ARISTAINETOS2 - bool "aristainetos2" - depends on MX6DL - select BOARD_LATE_INIT - select SYS_I2C_MXC - select MXC_UART - select FEC_MXC - select DM - imply CMD_SATA - imply CMD_DM - -config TARGET_ARISTAINETOS2B - bool "Support aristainetos2-revB" - depends on MX6DL - select BOARD_LATE_INIT - select SYS_I2C_MXC - select MXC_UART - select FEC_MXC - select DM - imply CMD_SATA - imply CMD_DM - -config TARGET_ARISTAINETOS2BCSL - bool "Support aristainetos2-revB CSL" - depends on MX6DL - select BOARD_LATE_INIT - select SYS_I2C_MXC - select MXC_UART - select FEC_MXC - select DM - imply CMD_SATA - imply CMD_DM - config TARGET_ARISTAINETOS2C bool "Support aristainetos2-revC" depends on MX6DL diff --git a/board/aristainetos/Kconfig b/board/aristainetos/Kconfig index 2ad3dbd56c..d67002503d 100644 --- a/board/aristainetos/Kconfig +++ b/board/aristainetos/Kconfig @@ -1,39 +1,3 @@ -if TARGET_ARISTAINETOS2 - -source "board/aristainetos/common/Kconfig" - -config SYS_BOARD - default "aristainetos" - -config SYS_BOARD_VERSION - default 2 - -endif - -if TARGET_ARISTAINETOS2B - -source "board/aristainetos/common/Kconfig" - -config SYS_BOARD - default "aristainetos" - -config SYS_BOARD_VERSION - default 3 - -endif - -if TARGET_ARISTAINETOS2BCSL - -source "board/aristainetos/common/Kconfig" - -config SYS_BOARD - default "aristainetos" - -config SYS_BOARD_VERSION - default 4 - -endif - if TARGET_ARISTAINETOS2C source "board/aristainetos/common/Kconfig" diff --git a/board/aristainetos/MAINTAINERS b/board/aristainetos/MAINTAINERS index b4ca7abb9c..1c3fb3aeb1 100644 --- a/board/aristainetos/MAINTAINERS +++ b/board/aristainetos/MAINTAINERS @@ -3,34 +3,11 @@ M: Heiko Schocher S: Maintained F: board/aristainetos/ F: include/configs/aristainetos2.h -F: configs/aristainetos2_defconfig -F: configs/aristainetos2b_defconfig -F: configs/aristainetos2bcsl_defconfig F: configs/aristainetos2c_defconfig -F: arch/arm/dts/imx6qdl-aristainetos2.dtsi -F: arch/arm/dts/imx6qdl-aristainetos2-common.dtsi -F: arch/arm/dts/imx6qdl-aristainetos2-u-boot.dtsi -F: arch/arm/dts/imx6dl-aristainetos2_7.dts -F: arch/arm/dts/imx6dl-aristainetos2_7.dtsi -F: arch/arm/dts/imx6dl-aristainetos2_7-u-boot.dtsi -F: arch/arm/dts/imx6dl-aristainetos2_4.dts -F: arch/arm/dts/imx6dl-aristainetos2_4.dtsi -F: arch/arm/dts/imx6dl-aristainetos2_4-u-boot.dtsi -F: arch/arm/dts/imx6dl-aristainetos2b_4.dts -F: arch/arm/dts/imx6dl-aristainetos2b_4-u-boot.dtsi -F: arch/arm/dts/imx6dl-aristainetos2b_7.dts -F: arch/arm/dts/imx6dl-aristainetos2b_7-u-boot.dtsi -F: arch/arm/dts/imx6qdl-aristainetos2b-u-boot.dtsi -F: arch/arm/dts/imx6qdl-aristainetos2b.dtsi -F: arch/arm/dts/imx6dl-aristainetos2b_csl_4.dts -F: arch/arm/dts/imx6dl-aristainetos2b_csl_4-u-boot.dtsi -F: arch/arm/dts/imx6dl-aristainetos2b_csl_7.dts -F: arch/arm/dts/imx6dl-aristainetos2b_csl_7-u-boot.dtsi -F: arch/arm/dts/imx6qdl-aristainetos2b_csl.dtsi -F: arch/arm/dts/imx6qdl-aristainetos2b_csl-u-boot.dtsi -F: arch/arm/dts/imx6dl-aristainetos2c_4.dts -F: arch/arm/dts/imx6dl-aristainetos2c_4-u-boot.dtsi F: arch/arm/dts/imx6dl-aristainetos2c_7.dts F: arch/arm/dts/imx6dl-aristainetos2c_7-u-boot.dtsi +F: arch/arm/dts/imx6dl-aristainetos2_7.dtsi +F: arch/arm/dts/imx6qdl-aristainetos2-common.dtsi +F: arch/arm/dts/imx6qdl-aristainetos2-u-boot.dtsi F: arch/arm/dts/imx6qdl-aristainetos2c.dtsi F: arch/arm/dts/imx6qdl-aristainetos2c-u-boot.dtsi diff --git a/board/aristainetos/aristainetos.c b/board/aristainetos/aristainetos.c index 14931120f6..6bfaaed666 100644 --- a/board/aristainetos/aristainetos.c +++ b/board/aristainetos/aristainetos.c @@ -194,87 +194,6 @@ static void enable_lvds(struct display_info_t const *dev) writel(reg, &iomux->gpr[3]); } -static void enable_spi_display(struct display_info_t const *dev) -{ - struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR; - struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; - int reg; - s32 timeout = 100000; - -#if defined(CONFIG_VIDEO_BMP_LOGO) - rotate_logo(3); /* portrait display in landscape mode */ -#endif - - reg = readl(&ccm->cs2cdr); - - /* select pll 5 clock */ - reg &= ~(MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK - | MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK); - writel(reg, &ccm->cs2cdr); - - /* set PLL5 to 197994996Hz */ - reg &= ~BM_ANADIG_PLL_VIDEO_DIV_SELECT; - reg |= BF_ANADIG_PLL_VIDEO_DIV_SELECT(0x21); - reg &= ~BM_ANADIG_PLL_VIDEO_POST_DIV_SELECT; - reg |= BF_ANADIG_PLL_VIDEO_POST_DIV_SELECT(0); - writel(reg, &ccm->analog_pll_video); - - writel(BF_ANADIG_PLL_VIDEO_NUM_A(0xfbf4), - &ccm->analog_pll_video_num); - writel(BF_ANADIG_PLL_VIDEO_DENOM_B(0xf4240), - &ccm->analog_pll_video_denom); - - reg &= ~BM_ANADIG_PLL_VIDEO_POWERDOWN; - writel(reg, &ccm->analog_pll_video); - - while (timeout--) - if (readl(&ccm->analog_pll_video) & BM_ANADIG_PLL_VIDEO_LOCK) - break; - if (timeout < 0) - printf("Warning: video pll lock timeout!\n"); - - reg = readl(&ccm->analog_pll_video); - reg |= BM_ANADIG_PLL_VIDEO_ENABLE; - reg &= ~BM_ANADIG_PLL_VIDEO_BYPASS; - writel(reg, &ccm->analog_pll_video); - - /* set LDB0, LDB1 clk select to 000/000 (PLL5 clock) */ - reg = readl(&ccm->cs2cdr); - reg &= ~(MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK - | MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK); - reg |= (0 << MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET) - | (0 << MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET); - writel(reg, &ccm->cs2cdr); - - reg = readl(&ccm->cscmr2); - reg |= MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV; - writel(reg, &ccm->cscmr2); - - reg = readl(&ccm->chsccdr); - reg |= (CHSCCDR_CLK_SEL_LDB_DI0 - << MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET); - reg &= ~MXC_CCM_CHSCCDR_IPU1_DI0_PODF_MASK; - reg |= (2 << MXC_CCM_CHSCCDR_IPU1_DI0_PODF_OFFSET); - reg &= ~MXC_CCM_CHSCCDR_IPU1_DI0_PRE_CLK_SEL_MASK; - reg |= (2 << MXC_CCM_CHSCCDR_IPU1_DI0_PRE_CLK_SEL_OFFSET); - writel(reg, &ccm->chsccdr); - - reg = IOMUXC_GPR2_BGREF_RRMODE_EXTERNAL_RES - | IOMUXC_GPR2_DI1_VS_POLARITY_ACTIVE_HIGH - | IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_HIGH - | IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG - | IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT - | IOMUXC_GPR2_LVDS_CH1_MODE_DISABLED - | IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0; - writel(reg, &iomux->gpr[2]); - - reg = readl(&iomux->gpr[3]); - reg = (reg & ~IOMUXC_GPR3_LVDS0_MUX_CTL_MASK) - | (IOMUXC_GPR3_MUX_SRC_IPU1_DI0 - << IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET); - writel(reg, &iomux->gpr[3]); -} - static void setup_display(void) { enable_ipu_clock(); @@ -331,25 +250,36 @@ static void setup_board_gpio(void) setup_one_led("led_blue", LEDST_OFF); } -#define ARI_RESC_FMT "setenv rescue_reason setenv bootargs \\${bootargs}" \ - " rescueReason=%d " - static void aristainetos_run_rescue_command(int reason) { - char rescue_reason_command[80]; + char rescue_reason_command[20]; - sprintf(rescue_reason_command, ARI_RESC_FMT, reason); + sprintf(rescue_reason_command, "setenv rreason %d", reason); run_command(rescue_reason_command, 0); } -static int aristainetos_eeprom(void) +static int aristainetos_bootmode_settings(void) { + struct gpio_desc *desc; + struct src *psrc = (struct src *)SRC_BASE_ADDR; + unsigned int sbmr1 = readl(&psrc->sbmr1); + char *my_bootdelay; + char bootmode = 0; + int ret; struct udevice *dev; int off; - int ret; u8 data[0x10]; u8 rescue_reason; + /* jumper controlled reset of the environment */ + ret = gpio_hog_lookup_name("env_reset", &desc); + if (!ret) { + if (dm_gpio_get_value(desc)) { + printf("\nReset u-boot environment (jumper)\n"); + run_command("run default_env; saveenv; saveenv", 0); + } + } + off = fdt_path_offset(gd->fdt_blob, "eeprom0"); if (off < 0) { printf("%s: No eeprom0 path offset\n", __func__); @@ -366,37 +296,26 @@ static int aristainetos_eeprom(void) if (ret) return ret; - ret = i2c_eeprom_read(dev, 0x1ff0, (uint8_t *)data, 6); + ret = i2c_eeprom_read(dev, 0x1ff0, (uint8_t *)data, sizeof(data)); if (ret) { printf("%s: Could not read EEPROM\n", __func__); return ret; } - if (strncmp((char *)&data[3], "ReScUe", 6) == 0) { - rescue_reason = *(uint8_t *)&data[9]; - memset(&data[3], 0xff, 7); - i2c_eeprom_write(dev, 0x1ff0, (uint8_t *)&data[3], 7); - printf("\nBooting into Rescue System (EEPROM)\n"); - aristainetos_run_rescue_command(rescue_reason); - run_command("run rescue_load_fit rescueboot", 0); - } else if (strncmp((char *)data, "DeF", 3) == 0) { + /* software controlled reset of the environment (EEPROM magic) */ + if (strncmp((char *)data, "DeF", 3) == 0) { memset(data, 0xff, 3); i2c_eeprom_write(dev, 0x1ff0, (uint8_t *)data, 3); - printf("\nClear u-boot environment (set back to defaults)\n"); + printf("\nReset u-boot environment (EEPROM)\n"); run_command("run default_env; saveenv; saveenv", 0); } - return 0; -}; - -static void aristainetos_bootmode_settings(void) -{ - struct gpio_desc *desc; - struct src *psrc = (struct src *)SRC_BASE_ADDR; - unsigned int sbmr1 = readl(&psrc->sbmr1); - char *my_bootdelay; - char bootmode = 0; - int ret; + if (sbmr1 & 0x40) { + env_set("bootmode", "1"); + printf("SD bootmode jumper set!\n"); + } else { + env_set("bootmode", "0"); + } /* * Check the boot-source. If booting from NOR Flash, @@ -420,28 +339,27 @@ static void aristainetos_bootmode_settings(void) env_set("bootdelay", "-2"); } - if (sbmr1 & 0x40) { - env_set("bootmode", "1"); - printf("SD bootmode jumper set!\n"); - } else { - env_set("bootmode", "0"); - } - - /* read out some jumper values*/ - ret = gpio_hog_lookup_name("env_reset", &desc); - if (!ret) { - if (dm_gpio_get_value(desc)) { - printf("\nClear env (set back to defaults)\n"); - run_command("run default_env; saveenv; saveenv", 0); - } - } + /* jumper controlled boot of the rescue system */ ret = gpio_hog_lookup_name("boot_rescue", &desc); if (!ret) { if (dm_gpio_get_value(desc)) { + printf("\nBooting into Rescue System (jumper)\n"); aristainetos_run_rescue_command(16); run_command("run rescue_xload_boot", 0); } } + + /* software controlled boot of the rescue system (EEPROM magic) */ + if (strncmp((char *)&data[3], "ReScUe", 6) == 0) { + rescue_reason = *(uint8_t *)&data[9]; + memset(&data[3], 0xff, 7); + i2c_eeprom_write(dev, 0x1ff0, (uint8_t *)&data[3], 7); + printf("\nBooting into Rescue System (EEPROM)\n"); + aristainetos_run_rescue_command(rescue_reason); + run_command("run rescue_xload_boot", 0); + } + + return 0; } #if defined(CONFIG_DM_PMIC_DA9063) @@ -497,15 +415,15 @@ static int setup_pmic_voltages(void) int board_late_init(void) { int x, y; + int ret; led_default_state(); splash_get_pos(&x, &y); bmp_display((ulong)&bmp_logo_bitmap[0], x, y); - aristainetos_bootmode_settings(); - - /* eeprom work */ - aristainetos_eeprom(); + ret = aristainetos_bootmode_settings(); + if (ret) + return ret; /* set board_type */ if (gd->board_type == BOARD_TYPE_4) @@ -549,97 +467,9 @@ struct display_info_t const displays[] = { .vmode = FB_VMODE_NONINTERLACED } } -#if ((CONFIG_SYS_BOARD_VERSION == 2) || \ - (CONFIG_SYS_BOARD_VERSION == 3) || \ - (CONFIG_SYS_BOARD_VERSION == 4) || \ - (CONFIG_SYS_BOARD_VERSION == 5)) - , { - .bus = -1, - .addr = 0, - .pixfmt = IPU_PIX_FMT_RGB24, - .detect = NULL, - .enable = enable_spi_display, - .mode = { - .name = "lg4573", - .refresh = 57, - .xres = 480, - .yres = 800, - .pixclock = 37037, - .left_margin = 59, - .right_margin = 10, - .upper_margin = 15, - .lower_margin = 15, - .hsync_len = 10, - .vsync_len = 15, - .sync = FB_SYNC_EXT | FB_SYNC_HOR_HIGH_ACT | - FB_SYNC_VERT_HIGH_ACT, - .vmode = FB_VMODE_NONINTERLACED - } - } -#endif }; size_t display_count = ARRAY_SIZE(displays); -#if defined(CONFIG_MTD_RAW_NAND) -iomux_v3_cfg_t nfc_pads[] = { - MX6_PAD_NANDF_CLE__NAND_CLE | MUX_PAD_CTRL(NO_PAD_CTRL), - MX6_PAD_NANDF_ALE__NAND_ALE | MUX_PAD_CTRL(NO_PAD_CTRL), - MX6_PAD_NANDF_WP_B__NAND_WP_B | MUX_PAD_CTRL(NO_PAD_CTRL), - MX6_PAD_NANDF_RB0__NAND_READY_B | MUX_PAD_CTRL(NO_PAD_CTRL), - MX6_PAD_NANDF_CS0__NAND_CE0_B | MUX_PAD_CTRL(NO_PAD_CTRL), - MX6_PAD_SD4_CMD__NAND_RE_B | MUX_PAD_CTRL(NO_PAD_CTRL), - MX6_PAD_SD4_CLK__NAND_WE_B | MUX_PAD_CTRL(NO_PAD_CTRL), - MX6_PAD_NANDF_D0__NAND_DATA00 | MUX_PAD_CTRL(NO_PAD_CTRL), - MX6_PAD_NANDF_D1__NAND_DATA01 | MUX_PAD_CTRL(NO_PAD_CTRL), - MX6_PAD_NANDF_D2__NAND_DATA02 | MUX_PAD_CTRL(NO_PAD_CTRL), - MX6_PAD_NANDF_D3__NAND_DATA03 | MUX_PAD_CTRL(NO_PAD_CTRL), - MX6_PAD_NANDF_D4__NAND_DATA04 | MUX_PAD_CTRL(NO_PAD_CTRL), - MX6_PAD_NANDF_D5__NAND_DATA05 | MUX_PAD_CTRL(NO_PAD_CTRL), - MX6_PAD_NANDF_D6__NAND_DATA06 | MUX_PAD_CTRL(NO_PAD_CTRL), - MX6_PAD_NANDF_D7__NAND_DATA07 | MUX_PAD_CTRL(NO_PAD_CTRL), - MX6_PAD_SD4_DAT0__NAND_DQS | MUX_PAD_CTRL(NO_PAD_CTRL), -}; - -static void setup_gpmi_nand(void) -{ - struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; - - /* config gpmi nand iomux */ - imx_iomux_v3_setup_multiple_pads(nfc_pads, - ARRAY_SIZE(nfc_pads)); - - /* gate ENFC_CLK_ROOT clock first,before clk source switch */ - clrbits_le32(&mxc_ccm->CCGR2, MXC_CCM_CCGR2_IOMUX_IPT_CLK_IO_MASK); - - /* config gpmi and bch clock to 100 MHz */ - clrsetbits_le32(&mxc_ccm->cs2cdr, - MXC_CCM_CS2CDR_ENFC_CLK_PODF_MASK | - MXC_CCM_CS2CDR_ENFC_CLK_PRED_MASK | - MXC_CCM_CS2CDR_ENFC_CLK_SEL_MASK, - MXC_CCM_CS2CDR_ENFC_CLK_PODF(0) | - MXC_CCM_CS2CDR_ENFC_CLK_PRED(3) | - MXC_CCM_CS2CDR_ENFC_CLK_SEL(3)); - - /* enable ENFC_CLK_ROOT clock */ - setbits_le32(&mxc_ccm->CCGR2, MXC_CCM_CCGR2_IOMUX_IPT_CLK_IO_MASK); - - /* enable gpmi and bch clock gating */ - setbits_le32(&mxc_ccm->CCGR4, - MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK | - MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_MASK | - MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK | - MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_MASK | - MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_OFFSET); - - /* enable apbh clock gating */ - setbits_le32(&mxc_ccm->CCGR0, MXC_CCM_CCGR0_APBHDMA_MASK); -} -#else -static void setup_gpmi_nand(void) -{ -} -#endif - int board_init(void) { struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR; @@ -648,7 +478,6 @@ int board_init(void) gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; setup_board_gpio(); - setup_gpmi_nand(); setup_display(); /* GPIO_1 for USB_OTG_ID */ diff --git a/board/aristainetos/common/Kconfig b/board/aristainetos/common/Kconfig index e26de5144d..945a2c4df9 100644 --- a/board/aristainetos/common/Kconfig +++ b/board/aristainetos/common/Kconfig @@ -2,10 +2,7 @@ config SYS_BOARD_VERSION int "select version of aristainetos board" help version of aristainetos board version - 2 version 2 - 3 version 2b - 4 version 2bcsl - 5 version 2c + 5 version 2c and 2d config SYS_I2C_MXC_I2C1 default y diff --git a/configs/aristainetos2_defconfig b/configs/aristainetos2_defconfig deleted file mode 100644 index 35e4b09715..0000000000 --- a/configs/aristainetos2_defconfig +++ /dev/null @@ -1,121 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_MX6=y -CONFIG_SYS_TEXT_BASE=0x17800000 -CONFIG_SYS_MALLOC_F_LEN=0xe000 -CONFIG_NR_DRAM_BANKS=1 -CONFIG_ENV_OFFSET=0xD0000 -CONFIG_MX6DL=y -CONFIG_TARGET_ARISTAINETOS2=y -CONFIG_DM_GPIO=y -CONFIG_ENV_OFFSET_REDUND=0xE0000 -CONFIG_IMX_HAB=y -# CONFIG_CMD_DEKBLOB is not set -# CONFIG_CMD_NANDBCB is not set -CONFIG_DEFAULT_DEVICE_TREE="imx6dl-aristainetos2_4" -CONFIG_FIT=y -CONFIG_SUPPORT_RAW_INITRD=y -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/aristainetos/aristainetos2.cfg" -CONFIG_BOOTDELAY=3 -CONFIG_AUTOBOOT_KEYED=y -CONFIG_AUTOBOOT_ENCRYPTION=y -CONFIG_AUTOBOOT_STOP_STR_SHA256="30bb0bce5f77da71a6e8e436fe40af54bc823db9501ae170f77e9992499d88fb" -CONFIG_USE_BOOTCOMMAND=y -CONFIG_BOOTCOMMAND="run ari_boot" -# CONFIG_CONSOLE_MUX is not set -CONFIG_SYS_CONSOLE_IS_IN_ENV=y -CONFIG_BOARD_TYPES=y -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y -# CONFIG_BOOTM_NETBSD is not set -# CONFIG_BOOTM_PLAN9 is not set -# CONFIG_BOOTM_RTEMS is not set -# CONFIG_BOOTM_VXWORKS is not set -# CONFIG_CMD_FLASH is not set -CONFIG_CMD_GPIO=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_NAND_TRIMFFS=y -# CONFIG_CMD_PINMUX is not set -# CONFIG_CMD_SATA is not set -CONFIG_CMD_USB=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_BMP=y -CONFIG_CMD_CACHE=y -# CONFIG_CMD_HASH is not set -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_EXT4_WRITE=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y -CONFIG_CMD_MTDPARTS=y -CONFIG_CMD_UBI=y -CONFIG_OF_CONTROL=y -CONFIG_OF_LIST="imx6dl-aristainetos2_4 imx6dl-aristainetos2_7" -CONFIG_DTB_RESELECT=y -CONFIG_MULTI_DTB_FIT=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_ENV_SPI_EARLY=y -CONFIG_SYS_REDUNDAND_ENVIRONMENT=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_VERSION_VARIABLE=y -CONFIG_BOUNCE_BUFFER=y -CONFIG_GPIO_HOG=y -CONFIG_DM_GPIO_LOOKUP_LABEL=y -CONFIG_DM_PCA953X=y -CONFIG_DM_I2C=y -CONFIG_LED=y -CONFIG_LED_GPIO=y -CONFIG_MISC=y -CONFIG_I2C_EEPROM=y -CONFIG_DM_MMC=y -CONFIG_FSL_USDHC=y -CONFIG_MTD=y -CONFIG_MTD_RAW_NAND=y -CONFIG_NAND_MXS=y -CONFIG_DM_SPI_FLASH=y -CONFIG_SF_DEFAULT_BUS=3 -CONFIG_SF_DEFAULT_CS=1 -CONFIG_SF_DEFAULT_MODE=0 -CONFIG_SF_DEFAULT_SPEED=20000000 -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_SPI_FLASH_MTD=y -CONFIG_MTD_UBI_FASTMAP=y -CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT=1 -CONFIG_PHYLIB=y -CONFIG_PHY_MICREL=y -CONFIG_PHY_MICREL_KSZ90X1=y -CONFIG_DM_ETH=y -CONFIG_MII=y -CONFIG_PHY=y -CONFIG_PINCTRL=y -CONFIG_PINCTRL_IMX6=y -CONFIG_DM_PMIC=y -CONFIG_DM_REGULATOR=y -CONFIG_DM_REGULATOR_FIXED=y -CONFIG_DM_PWM=y -CONFIG_PWM_IMX=y -CONFIG_DM_RTC=y -CONFIG_RTC_DS1307=y -CONFIG_DM_SERIAL=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_MXC_SPI=y -CONFIG_SYSRESET=y -CONFIG_SYSRESET_WATCHDOG=y -CONFIG_USB=y -CONFIG_DM_USB=y -CONFIG_USB_STORAGE=y -CONFIG_DM_VIDEO=y -CONFIG_SYS_WHITE_ON_BLACK=y -CONFIG_DISPLAY=y -CONFIG_VIDEO_IPUV3=y -CONFIG_SPLASH_SCREEN=y -CONFIG_SPLASH_SCREEN_ALIGN=y -CONFIG_VIDEO_BMP_RLE8=y -CONFIG_BMP_16BPP=y -CONFIG_IMX_WATCHDOG=y -# CONFIG_EFI_LOADER is not set diff --git a/configs/aristainetos2b_defconfig b/configs/aristainetos2b_defconfig deleted file mode 100644 index d47a074645..0000000000 --- a/configs/aristainetos2b_defconfig +++ /dev/null @@ -1,115 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_MX6=y -CONFIG_SYS_TEXT_BASE=0x17800000 -CONFIG_SYS_MALLOC_F_LEN=0xe000 -CONFIG_NR_DRAM_BANKS=1 -CONFIG_ENV_OFFSET=0xD0000 -CONFIG_MX6DL=y -CONFIG_TARGET_ARISTAINETOS2B=y -CONFIG_DM_GPIO=y -CONFIG_ENV_OFFSET_REDUND=0xE0000 -CONFIG_IMX_HAB=y -# CONFIG_CMD_DEKBLOB is not set -CONFIG_DEFAULT_DEVICE_TREE="imx6dl-aristainetos2b_4" -CONFIG_FIT=y -CONFIG_SUPPORT_RAW_INITRD=y -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/aristainetos/aristainetos2.cfg" -CONFIG_BOOTDELAY=3 -CONFIG_AUTOBOOT_KEYED=y -CONFIG_AUTOBOOT_ENCRYPTION=y -CONFIG_AUTOBOOT_STOP_STR_SHA256="30bb0bce5f77da71a6e8e436fe40af54bc823db9501ae170f77e9992499d88fb" -CONFIG_USE_BOOTCOMMAND=y -CONFIG_BOOTCOMMAND="run ari_boot" -# CONFIG_CONSOLE_MUX is not set -CONFIG_SYS_CONSOLE_IS_IN_ENV=y -CONFIG_BOARD_TYPES=y -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y -# CONFIG_BOOTM_NETBSD is not set -# CONFIG_BOOTM_PLAN9 is not set -# CONFIG_BOOTM_RTEMS is not set -# CONFIG_BOOTM_VXWORKS is not set -# CONFIG_CMD_FLASH is not set -CONFIG_CMD_GPIO=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -# CONFIG_CMD_PINMUX is not set -# CONFIG_CMD_SATA is not set -CONFIG_CMD_USB=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_BMP=y -CONFIG_CMD_CACHE=y -# CONFIG_CMD_HASH is not set -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_EXT4_WRITE=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y -CONFIG_CMD_MTDPARTS=y -CONFIG_CMD_UBI=y -CONFIG_OF_CONTROL=y -CONFIG_OF_LIST="imx6dl-aristainetos2b_4 imx6dl-aristainetos2b_7" -CONFIG_DTB_RESELECT=y -CONFIG_MULTI_DTB_FIT=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_ENV_SPI_EARLY=y -CONFIG_SYS_REDUNDAND_ENVIRONMENT=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_VERSION_VARIABLE=y -CONFIG_BOUNCE_BUFFER=y -CONFIG_GPIO_HOG=y -CONFIG_DM_GPIO_LOOKUP_LABEL=y -CONFIG_DM_PCA953X=y -CONFIG_DM_I2C=y -CONFIG_LED=y -CONFIG_LED_GPIO=y -CONFIG_MISC=y -CONFIG_I2C_EEPROM=y -CONFIG_DM_MMC=y -CONFIG_FSL_USDHC=y -CONFIG_MTD=y -CONFIG_DM_SPI_FLASH=y -CONFIG_SF_DEFAULT_MODE=0 -CONFIG_SF_DEFAULT_SPEED=20000000 -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_SPI_FLASH_MTD=y -CONFIG_MTD_UBI_FASTMAP=y -CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT=1 -CONFIG_PHYLIB=y -CONFIG_PHY_MICREL=y -CONFIG_PHY_MICREL_KSZ90X1=y -CONFIG_DM_ETH=y -CONFIG_MII=y -CONFIG_PHY=y -CONFIG_PINCTRL=y -CONFIG_PINCTRL_IMX6=y -CONFIG_DM_PMIC=y -CONFIG_DM_REGULATOR=y -CONFIG_DM_REGULATOR_FIXED=y -CONFIG_DM_PWM=y -CONFIG_PWM_IMX=y -CONFIG_DM_RTC=y -CONFIG_RTC_DS1307=y -CONFIG_DM_SERIAL=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_MXC_SPI=y -CONFIG_SYSRESET=y -CONFIG_SYSRESET_WATCHDOG=y -CONFIG_USB=y -CONFIG_DM_USB=y -CONFIG_USB_STORAGE=y -CONFIG_DM_VIDEO=y -CONFIG_SYS_WHITE_ON_BLACK=y -CONFIG_DISPLAY=y -CONFIG_VIDEO_IPUV3=y -CONFIG_SPLASH_SCREEN=y -CONFIG_SPLASH_SCREEN_ALIGN=y -CONFIG_VIDEO_BMP_RLE8=y -CONFIG_BMP_16BPP=y -CONFIG_IMX_WATCHDOG=y -# CONFIG_EFI_LOADER is not set diff --git a/configs/aristainetos2bcsl_defconfig b/configs/aristainetos2bcsl_defconfig deleted file mode 100644 index 30139621d8..0000000000 --- a/configs/aristainetos2bcsl_defconfig +++ /dev/null @@ -1,115 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_MX6=y -CONFIG_SYS_TEXT_BASE=0x17800000 -CONFIG_SYS_MALLOC_F_LEN=0xe000 -CONFIG_NR_DRAM_BANKS=1 -CONFIG_ENV_OFFSET=0xD0000 -CONFIG_MX6DL=y -CONFIG_TARGET_ARISTAINETOS2BCSL=y -CONFIG_DM_GPIO=y -CONFIG_ENV_OFFSET_REDUND=0xE0000 -CONFIG_IMX_HAB=y -# CONFIG_CMD_DEKBLOB is not set -CONFIG_DEFAULT_DEVICE_TREE="imx6dl-aristainetos2b_csl_4" -CONFIG_FIT=y -CONFIG_SUPPORT_RAW_INITRD=y -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/aristainetos/aristainetos2.cfg" -CONFIG_BOOTDELAY=3 -CONFIG_AUTOBOOT_KEYED=y -CONFIG_AUTOBOOT_ENCRYPTION=y -CONFIG_AUTOBOOT_STOP_STR_SHA256="30bb0bce5f77da71a6e8e436fe40af54bc823db9501ae170f77e9992499d88fb" -CONFIG_USE_BOOTCOMMAND=y -CONFIG_BOOTCOMMAND="run ari_boot" -# CONFIG_CONSOLE_MUX is not set -CONFIG_SYS_CONSOLE_IS_IN_ENV=y -CONFIG_BOARD_TYPES=y -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y -# CONFIG_BOOTM_NETBSD is not set -# CONFIG_BOOTM_PLAN9 is not set -# CONFIG_BOOTM_RTEMS is not set -# CONFIG_BOOTM_VXWORKS is not set -# CONFIG_CMD_FLASH is not set -CONFIG_CMD_GPIO=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -# CONFIG_CMD_PINMUX is not set -# CONFIG_CMD_SATA is not set -CONFIG_CMD_USB=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_BMP=y -CONFIG_CMD_CACHE=y -# CONFIG_CMD_HASH is not set -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_EXT4_WRITE=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y -CONFIG_CMD_MTDPARTS=y -CONFIG_CMD_UBI=y -CONFIG_OF_CONTROL=y -CONFIG_OF_LIST="imx6dl-aristainetos2b_csl_4 imx6dl-aristainetos2b_csl_7" -CONFIG_DTB_RESELECT=y -CONFIG_MULTI_DTB_FIT=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_ENV_SPI_EARLY=y -CONFIG_SYS_REDUNDAND_ENVIRONMENT=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_VERSION_VARIABLE=y -CONFIG_BOUNCE_BUFFER=y -CONFIG_GPIO_HOG=y -CONFIG_DM_GPIO_LOOKUP_LABEL=y -CONFIG_DM_PCA953X=y -CONFIG_DM_I2C=y -CONFIG_LED=y -CONFIG_LED_GPIO=y -CONFIG_MISC=y -CONFIG_I2C_EEPROM=y -CONFIG_DM_MMC=y -CONFIG_FSL_USDHC=y -CONFIG_MTD=y -CONFIG_DM_SPI_FLASH=y -CONFIG_SF_DEFAULT_MODE=0 -CONFIG_SF_DEFAULT_SPEED=20000000 -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_SPI_FLASH_MTD=y -CONFIG_MTD_UBI_FASTMAP=y -CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT=1 -CONFIG_PHYLIB=y -CONFIG_PHY_MICREL=y -CONFIG_PHY_MICREL_KSZ90X1=y -CONFIG_DM_ETH=y -CONFIG_MII=y -CONFIG_PHY=y -CONFIG_PINCTRL=y -CONFIG_PINCTRL_IMX6=y -CONFIG_DM_PMIC=y -CONFIG_DM_REGULATOR=y -CONFIG_DM_REGULATOR_FIXED=y -CONFIG_DM_PWM=y -CONFIG_PWM_IMX=y -CONFIG_DM_RTC=y -CONFIG_RTC_DS1307=y -CONFIG_DM_SERIAL=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_MXC_SPI=y -CONFIG_SYSRESET=y -CONFIG_SYSRESET_WATCHDOG=y -CONFIG_USB=y -CONFIG_DM_USB=y -CONFIG_USB_STORAGE=y -CONFIG_DM_VIDEO=y -CONFIG_SYS_WHITE_ON_BLACK=y -CONFIG_DISPLAY=y -CONFIG_VIDEO_IPUV3=y -CONFIG_SPLASH_SCREEN=y -CONFIG_SPLASH_SCREEN_ALIGN=y -CONFIG_VIDEO_BMP_RLE8=y -CONFIG_BMP_16BPP=y -CONFIG_IMX_WATCHDOG=y -# CONFIG_EFI_LOADER is not set diff --git a/configs/aristainetos2c_defconfig b/configs/aristainetos2c_defconfig index 50cadb749a..f602b6eda1 100644 --- a/configs/aristainetos2c_defconfig +++ b/configs/aristainetos2c_defconfig @@ -10,11 +10,10 @@ CONFIG_DM_GPIO=y CONFIG_ENV_OFFSET_REDUND=0xE0000 CONFIG_IMX_HAB=y # CONFIG_CMD_DEKBLOB is not set -CONFIG_DEFAULT_DEVICE_TREE="imx6dl-aristainetos2c_4" CONFIG_FIT=y CONFIG_SUPPORT_RAW_INITRD=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/aristainetos/aristainetos2.cfg" -CONFIG_BOOTDELAY=3 +CONFIG_BOOTDELAY=-2 CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_ENCRYPTION=y CONFIG_AUTOBOOT_STOP_STR_SHA256="30bb0bce5f77da71a6e8e436fe40af54bc823db9501ae170f77e9992499d88fb" @@ -51,7 +50,8 @@ CONFIG_CMD_FS_GENERIC=y CONFIG_CMD_MTDPARTS=y CONFIG_CMD_UBI=y CONFIG_OF_CONTROL=y -CONFIG_OF_LIST="imx6dl-aristainetos2c_4 imx6dl-aristainetos2c_7" +CONFIG_DEFAULT_DEVICE_TREE="imx6dl-aristainetos2c_7" +CONFIG_OF_LIST="imx6dl-aristainetos2c_7" CONFIG_DTB_RESELECT=y CONFIG_MULTI_DTB_FIT=y CONFIG_ENV_OVERWRITE=y diff --git a/include/configs/aristainetos2.h b/include/configs/aristainetos2.h index 6e8595caad..916bd5a59c 100644 --- a/include/configs/aristainetos2.h +++ b/include/configs/aristainetos2.h @@ -13,14 +13,15 @@ #define CONFIG_HOSTNAME "aristainetos2" +#if (CONFIG_SYS_BOARD_VERSION == 5) #define CONFIG_MXC_UART_BASE UART2_BASE #define CONSOLE_DEV "ttymxc1" +#endif #define CONFIG_FEC_XCV_TYPE RGMII /* Framebuffer */ #define CONFIG_SYS_LDB_CLOCK 28341000 -#define CONFIG_LG4573 #include "mx6_common.h" @@ -77,6 +78,8 @@ "enable_hab_check=1\0" #else #define HAB_EXTRA_SETTINGS \ + "hab_check_addr=echo HAB check addr always returns " \ + "true;true\0" \ "hab_check_file_fit=echo HAB check FIT file always returns " \ "true;true\0" \ "hab_check_flash_fit=echo HAB check flash FIT always returns " \ @@ -86,96 +89,12 @@ "enable_hab_check=0\0" #endif -#if (CONFIG_SYS_BOARD_VERSION == 3) -#define CONFIG_EXTRA_ENV_BOARD_SETTINGS \ - "dead=led led_red on\0" \ - "mtdids=nand0=gpmi-nand,nor0=spi0.0\0" \ - "mtdparts=mtdparts=spi0.0:832k(u-boot),64k(env),64k(env-red)," \ - "-(ubi-nor);gpmi-nand:-(ubi)\0" \ - "addmisc=setenv bootargs ${bootargs} net.ifnames=0 consoleblank=0 " \ - "bootmode=${bootmode} mmcpart=${mmcpart}\0" \ - "mainboot=echo Booting from SD-card ...; " \ - "run mainargs addmtd addmisc;" \ - "if test -n ${addmiscM}; then run addmiscM;fi;" \ - "if test -n ${addmiscC}; then run addmiscC;fi;" \ - "if test -n ${addmiscD}; then run addmiscD;fi;" \ - "run boot_board_type;" \ - "bootm ${fit_addr_r}\0" \ - "mainargs=setenv bootargs console=${console},${baudrate} " \ - "root=${mmcroot}\0" \ - "main_load_fit=ext4load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \ - "${fit_file}\0" \ - "rescue_load_fit=ext4load mmc ${mmcdev}:${mmcrescuepart} " \ - "${fit_addr_r} ${rescue_fit_file}\0" -#elif (CONFIG_SYS_BOARD_VERSION == 4) -#define CONFIG_EXTRA_ENV_BOARD_SETTINGS \ - "dead=led led_red on;led led_red2 on;\0" \ - "mtdids=nand0=gpmi-nand,nor0=spi0.0\0" \ - "mtdparts=mtdparts=spi0.0:832k(u-boot),64k(env),64k(env-red)," \ - "-(ubi-nor);gpmi-nand:-(ubi)\0" \ - "addmisc=setenv bootargs ${bootargs} net.ifnames=0 consoleblank=0 " \ - "bootmode=${bootmode} mmcpart=${mmcpart}\0" \ - "mainboot=echo Booting from SD-card ...; " \ - "run mainargs addmtd addmisc;" \ - "if test -n ${addmiscM}; then run addmiscM;fi;" \ - "if test -n ${addmiscC}; then run addmiscC;fi;" \ - "if test -n ${addmiscD}; then run addmiscD;fi;" \ - "run boot_board_type;" \ - "bootm ${fit_addr_r}\0" \ - "mainargs=setenv bootargs console=${console},${baudrate} " \ - "root=${mmcroot}\0" \ - "main_load_fit=ext4load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \ - "${fit_file}\0" \ - "rescue_load_fit=ext4load mmc ${mmcdev}:${mmcrescuepart} " \ - "${fit_addr_r} ${rescue_fit_file}\0" -#elif (CONFIG_SYS_BOARD_VERSION == 5) -#define CONFIG_EXTRA_ENV_BOARD_SETTINGS \ - "emmcpart=1\0" \ - "emmc_rescue_part=3\0" \ - "emmcdev=1\0" \ - "emmcroot=/dev/mmcblk1p1 rootwait rw\0" \ - "dead=led led_red on\0" \ - "mtdids=nor0=spi0.0\0" \ - "mtdparts=mtdparts=spi0.0:832k(u-boot),64k(env),64k(env-red)," \ - "-(ubi-nor)\0" \ - "addmisc=setenv bootargs ${bootargs} net.ifnames=0 consoleblank=0 " \ - "bootmode=${bootmode} mmcpart=${mmcpart} " \ - "emmcpart=${emmcpart}\0" \ - "mainboot=echo Booting from eMMC ...; " \ - "run mainargs addmtd addmisc;" \ - "if test -n ${addmiscM}; then run addmiscM;fi;" \ - "if test -n ${addmiscC}; then run addmiscC;fi;" \ - "if test -n ${addmiscD}; then run addmiscD;fi;" \ - "run boot_board_type;" \ - "bootm ${fit_addr_r}\0" \ - "mainargs=setenv bootargs console=${console},${baudrate} " \ - "root=${emmcroot} rootfstype=ext4\0 " \ - "main_load_fit=ext4load mmc ${emmcdev}:${emmcpart} ${fit_addr_r} " \ - "${fit_file}; " \ - "imi ${fit_addr_r}\0 " \ - "rescue_load_fit=ext4load mmc ${emmcdev}:${emmc_rescue_part} " \ - "${fit_addr_r} ${rescue_fit_file};imi ${fit_addr_r}\0" -#else +#if (CONFIG_SYS_BOARD_VERSION == 5) #define CONFIG_EXTRA_ENV_BOARD_SETTINGS \ - "dead=led led_red on\0" \ - "mtdids=nand0=gpmi-nand,nor0=spi3.1\0" \ - "mtdparts=mtdparts=spi3.1:832k(u-boot),64k(env),64k(env-red)," \ - "-(ubi-nor);gpmi-nand:-(ubi)\0" \ - "addmisc=setenv bootargs ${bootargs} net.ifnames=0 consoleblank=0 " \ - "bootmode=${bootmode} mmcpart=${mmcpart}\0" \ - "mainboot=echo Booting from SD-card ...; " \ - "run mainargs addmtd addmisc;" \ - "if test -n ${addmiscM}; then run addmiscM;fi;" \ - "if test -n ${addmiscC}; then run addmiscC;fi;" \ - "if test -n ${addmiscD}; then run addmiscD;fi;" \ - "run boot_board_type;" \ - "bootm ${fit_addr_r}\0" \ - "mainargs=setenv bootargs console=${console},${baudrate} " \ - "root=${mmcroot}\0" \ - "main_load_fit=ext4load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \ - "${fit_file}\0" \ - "rescue_load_fit=ext4load mmc ${mmcdev}:${mmcrescuepart} " \ - "${fit_addr_r} ${rescue_fit_file}\0" + "dead=while true; do; " \ + "led led_red on; sleep 1;" \ + "led led_red off; sleep 1;" \ + "done\0" #endif #define CONFIG_EXTRA_ENV_SETTINGS \ @@ -183,17 +102,24 @@ "usb_pgood_delay=2000\0" \ "nor_bootdelay=-2\0" \ "script=u-boot.scr\0" \ - "fit_file=/boot/system.itb\0" \ - "rescue_fit_file=/boot/rescue.itb\0" \ "loadaddr=0x12000000\0" \ "fit_addr_r=0x14000000\0" \ - "uboot=/boot/u-boot.imx\0" \ "uboot_sz=d0000\0" \ "panel=lb07wv8\0" \ "splashpos=m,m\0" \ "console=" CONSOLE_DEV "\0" \ - "fdt_high=0xffffffff\0" \ - "initrd_high=0xffffffff\0" \ + "emmcroot=/dev/mmcblk1p1 rootwait rw\0" \ + "mtdids=nor0=spi0.0\0" \ + "mtdparts=mtdparts=spi0.0:832k(u-boot),64k(env),64k(env-red)," \ + "-(ubi-nor)\0" \ + "mk_fitfile_path=setenv fit_file /${sysnum}/system.itb\0" \ + "mk_rescue_fitfile_path=setenv rescue_fit_file /${rescue_sysnum}/system.itb\0" \ + "mk_uboot_path=setenv uboot /${sysnum}/u-boot.imx\0" \ + "mk_pubkey_path=setenv pubkey /${sysnum}/PCR.pem\0" \ + "mk_rescue_pubkey_path=setenv pubkey /${rescue_sysnum}/PCR.pem\0" \ + "addmisc=setenv bootargs ${bootargs} net.ifnames=0 consoleblank=0 " \ + "bootmode=${bootmode} rng_core.default_quality=1000 " \ + "mmcpart=${mmcpart} emmcpart=${emmcpart} sysnum=${sysnum}\0" \ "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ "boot_board_type=bootm ${fit_addr_r}#${board_type}\0" \ "get_env=mw ${loadaddr} 0 0x20000;" \ @@ -205,7 +131,7 @@ "sf protect unlock 0 0x1000000;" \ "mw ${loadaddr} 0 0x20000;" \ "env export -t ${loadaddr} serial# ethaddr " \ - "board_type panel addmisc addmiscM addmiscC addmiscD;" \ + "board_type panel;" \ "env default -a;" \ "env import -t ${loadaddr}\0" \ "loadbootscript=" \ @@ -216,28 +142,62 @@ "loadbootscriptUSBf=" \ "fatload usb 0 ${loadaddr} ${script};\0" \ "bootscriptUSB=echo Running bootscript from usb-stick ...; " \ - "source\0" \ + "source \0" \ "bootscript=echo Running bootscript from mmc ...; " \ - "source\0" \ + "source \0" \ "mmcpart=1\0" \ - "mmcrescuepart=3\0" \ "mmcdev=0\0" \ + "emmcpart=1\0" \ + "emmcdev=1\0" \ + "sysnum=1\0" \ + "rescue_sysnum=0\0" \ + "rreason=18\0" \ + "mainboot=echo Booting from eMMC ...; " \ + "run mainargs addmtd addmisc;" \ + "run boot_board_type;" \ + "bootm ${fit_addr_r}\0" \ + "mainargs=setenv bootargs console=${console},${baudrate} " \ + "root=${emmcroot} rootfstype=ext4\0 " \ + "main_load_fit=run mk_fitfile_path; " \ + "ext4load mmc ${emmcdev}:${emmcpart} ${fit_addr_r} " \ + "${fit_file}; " \ + "imi ${fit_addr_r}\0 " \ + "rescue_load_fit=run mk_rescue_fitfile_path; " \ + "ext4load mmc ${emmcdev}:${emmcpart} ${fit_addr_r} " \ + "${rescue_fit_file}; " \ + "imi ${fit_addr_r}\0" \ + "main_load_pubkey=run mk_pubkey_path; " \ + "setenv hab_check_filetype \"PCR.pem\";" \ + "env set check_addr ${loadaddr};" \ + "ext4load mmc ${emmcdev}:${emmcpart} ${loadaddr} " \ + "${pubkey}\0" \ + "rescue_load_pubkey=run mk_rescue_pubkey_path; " \ + "setenv hab_check_filetype \"PCR.pem\";" \ + "env set check_addr ${loadaddr};" \ + "ext4load mmc ${emmcdev}:${emmcpart} ${loadaddr} " \ + "${pubkey}\0" \ + "mainRargs=setenv bootargs console=${console},${baudrate} " \ + "rescue_sysnum=${rescue_sysnum} root=${emmcroot} rootfstype=ext4\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} " \ "root=${mmcroot}\0" \ + "mmcRargs=setenv bootargs console=${console},${baudrate} " \ + "rescue_sysnum=${rescue_sysnum} root=${mmcroot}\0" \ "mmcboot=echo Booting from mmc ...; " \ "run mmcargs addmtd addmisc;" \ - "if test -n ${addmiscM}; then run addmiscM;fi;" \ - "if test -n ${addmiscC}; then run addmiscC;fi;" \ - "if test -n ${addmiscD}; then run addmiscD;fi;" \ "run boot_board_type;" \ "bootm ${fit_addr_r}\0" \ - "mmc_load_fit=ext4load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \ + "mmc_load_fit=run mk_fitfile_path; " \ + "ext4load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \ "${fit_file}\0" \ - "mmc_load_uboot=ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \ - "${uboot}\0" \ - "mmc_rescue_load_fit=ext4load mmc ${mmcdev}:${mmcrescuepart} " \ + "imi ${fit_addr_r}\0" \ + "mmc_rescue_load_fit=run mk_rescue_fitfile_path; " \ + "ext4load mmc ${mmcdev}:${mmcpart} " \ "${fit_addr_r} ${rescue_fit_file}\0" \ + "imi ${fit_addr_r}\0" \ + "mmc_load_uboot=run mk_uboot_path; " \ + "ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \ + "${uboot}\0" \ "mmc_upd_uboot=mw.b ${loadaddr} 0xff ${uboot_sz};" \ "setexpr cmp_buf ${loadaddr} + ${uboot_sz};" \ "setexpr uboot_maxsize ${uboot_sz} - 400;" \ @@ -246,14 +206,19 @@ "sf write ${loadaddr} 400 ${filesize};" \ "sf read ${cmp_buf} 400 ${uboot_sz};" \ "cmp.b ${loadaddr} ${cmp_buf} ${uboot_maxsize}\0" \ - "rescueargs=setenv bootargs console=${console},${baudrate} " \ - "root=/dev/ram rw\0 " \ + "mmc_load_pubkey=run mk_pubkey_path; " \ + "setenv hab_check_filetype \"PCR.pem\";" \ + "env set check_addr ${loadaddr};" \ + "ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \ + "${pubkey}\0" \ + "mmc_rescue_load_pubkey=run mk_rescue_pubkey_path; " \ + "setenv hab_check_filetype \"PCR.pem\";" \ + "env set check_addr ${loadaddr};" \ + "ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \ + "${pubkey}\0" \ "rescueboot=echo Booting rescue system ...; " \ - "run rescueargs addmtd addmisc;" \ + "run addmtd addmisc;" \ "if test -n ${rescue_reason}; then run rescue_reason;fi;" \ - "if test -n ${addmiscM}; then run addmiscM;fi;" \ - "if test -n ${addmiscC}; then run addmiscC;fi;" \ - "if test -n ${addmiscD}; then run addmiscD;fi;" \ "run boot_board_type;" \ "if bootm ${fit_addr_r}; then ; " \ "else " \ @@ -261,50 +226,73 @@ "fi; \0" \ "r_reason_syserr=setenv rescue_reason setenv bootargs " \ "\\\\${bootargs} " \ - "rescueReason=18\0 " \ - "usb_load_fit=ext4load usb 0 ${fit_addr_r} ${fit_file}\0" \ - "usb_load_fitf=fatload usb 0 ${fit_addr_r} ${fit_file}\0" \ - "usb_load_rescuefit=ext4load usb 0 ${fit_addr_r} " \ + "rescueReason=$rreason\0 " \ + "usb_load_fit=run mk_fitfile_path; " \ + "ext4load usb 0 ${fit_addr_r} ${fit_file}\0" \ + "usb_load_fitf=run mk_fitfile_path; " \ + "fatload usb 0 ${fit_addr_r} ${fit_file}\0" \ + "usb_load_rescuefit=run mk_rescue_fitfile_path; " \ + "ext4load usb 0 ${fit_addr_r} " \ "${rescue_fit_file}\0" \ - "usb_load_rescuefitf=fatload usb 0 ${fit_addr_r} " \ + "usb_load_rescuefitf=run mk_rescue_fitfile_path; " \ + "fatload usb 0 ${fit_addr_r} " \ "${rescue_fit_file}\0" \ + "usb_load_pubkey=run mk_pubkey_path; " \ + "setenv hab_check_filetype \"PCR.pem\";" \ + "env set check_addr ${loadaddr};" \ + "ext4load usb 0 ${loadaddr} ${pubkey}\0" \ + "usb_rescue_load_pubkey=run mk_rescue_pubkey_path; " \ + "setenv hab_check_filetype \"PCR.pem\";" \ + "env set check_addr ${loadaddr};" \ + "ext4load usb 0 ${loadaddr} ${pubkey}\0" \ + "usb_load_pubkeyf=run mk_pubkey_path; " \ + "setenv hab_check_filetype \"PCR.pem\";" \ + "env set check_addr ${loadaddr};" \ + "fatload usb 0 ${loadaddr} ${pubkey}\0" \ + "usb_rescue_load_pubkeyf=run mk_rescue_pubkey_path; " \ + "setenv hab_check_filetype \"PCR.pem\";" \ + "env set check_addr ${loadaddr};" \ + "fatload usb 0 ${loadaddr} ${pubkey}\0" \ "usbroot=/dev/sda1 rootwait rw\0" \ "usbboot=echo Booting from usb-stick ...; " \ "run usbargs addmtd addmisc;" \ - "if test -n ${addmiscM}; then run addmiscM;fi;" \ - "if test -n ${addmiscC}; then run addmiscC;fi;" \ - "if test -n ${addmiscD}; then run addmiscD;fi;" \ "run boot_board_type;" \ "bootm ${fit_addr_r}\0" \ "usbargs=setenv bootargs console=${console},${baudrate} " \ "root=${usbroot}\0" \ + "usbRargs=setenv bootargs console=${console},${baudrate} " \ + "rescue_sysnum=${rescue_sysnum} root=${usbroot} rw\0 " \ "mmc_rescue_boot=" \ "run r_reason_syserr;" \ - "if run mmc_rescue_load_fit hab_check_file_fit; then " \ - "run rescueboot; " \ + "if run mmc_rescue_load_pubkey hab_check_addr " \ + "mmc_rescue_load_fit hab_check_file_fit; then " \ + "run mmcRargs; run rescueboot; " \ "else " \ - "run dead; " \ "echo RESCUE SYSTEM FROM SD-CARD BOOT FAILURE;" \ + "run dead; " \ "fi;\0" \ "main_rescue_boot=" \ - "if run main_load_fit hab_check_flash_fit; then " \ + "if run main_load_pubkey hab_check_addr " \ + "main_load_fit hab_check_flash_fit; then " \ "if run mainboot; then ; " \ "else " \ "run r_reason_syserr;" \ - "if run rescue_load_fit hab_check_file_fit;" \ - "then run rescueboot; " \ + "if run rescue_load_pubkey hab_check_addr " \ + "rescue_load_fit hab_check_file_fit; then " \ + "run mainRargs; run rescueboot; " \ "else " \ - "run dead; " \ "echo RESCUE SYSTEM BOOT FAILURE;" \ + "run dead; " \ "fi; " \ "fi; " \ "else " \ "run r_reason_syserr;" \ - "if run rescue_load_fit hab_check_file_fit; then " \ - "run rescueboot; " \ + "if run rescue_load_pubkey hab_check_addr " \ + "rescue_load_fit hab_check_file_fit; then " \ + "run mainRargs; run rescueboot; " \ "else " \ - "run dead; " \ "echo RESCUE SYSTEM BOOT FAILURE;" \ + "run dead; " \ "fi; " \ "fi;\0" \ "usb_mmc_rescue_boot=" \ @@ -318,17 +306,21 @@ "hab_check_file_bootscript;" \ "then run bootscriptUSB; " \ "fi; " \ - "if run usb_load_fit hab_check_file_fit; then " \ + "if run usb_load_pubkey hab_check_addr " \ + "usb_load_fit hab_check_file_fit; then " \ "run usbboot; " \ "fi; " \ - "if run usb_load_fitf hab_check_file_fit; then " \ + "if run usb_load_pubkeyf hab_check_addr " \ + "usb_load_fitf hab_check_file_fit; then " \ "run usbboot; " \ "fi; "\ - "if run usb_load_rescuefit hab_check_file_fit;" \ - "then run r_reason_syserr rescueboot;" \ + "if run usb_rescue_load_pubkey hab_check_addr " \ + "usb_load_rescuefit hab_check_file_fit; then " \ + "run r_reason_syserr usbRargs; run rescueboot;" \ "fi; " \ - "if run usb_load_rescuefitf hab_check_file_fit;" \ - "then run r_reason_syserr rescueboot;" \ + "if run usb_rescue_load_pubkeyf hab_check_addr " \ + "usb_load_rescuefitf hab_check_file_fit; then " \ + "run r_reason_syserr usbRargs; run rescueboot;" \ "fi; " \ "run mmc_rescue_boot;" \ "fi; "\ @@ -338,48 +330,57 @@ "if test ${bootmode} -ne 0 ; then " \ "mmc dev ${mmcdev};" \ "if mmc rescan; then " \ - "if run mmc_rescue_load_fit " \ - "hab_check_file_fit; then " \ - "run rescueboot; " \ + "if run mmc_rescue_load_pubkey " \ + "hab_check_addr " \ + "mmc_rescue_load_fit " \ + "hab_check_file_fit; then " \ + "run mmcRargs; run rescueboot; " \ "else " \ "usb start;" \ "if usb storage; then " \ - "if run usb_load_rescuefit " \ - "hab_check_file_fit;"\ - "then " \ - "run rescueboot;" \ + "if run usb_rescue_load_pubkey " \ + "hab_check_addr " \ + "usb_load_rescuefit " \ + "hab_check_file_fit; then " \ + "run usbRargs; run rescueboot;" \ "fi; " \ - "if run usb_load_rescuefitf "\ - "hab_check_file_fit;"\ - "then " \ - "run rescueboot;" \ + "if run usb_rescue_load_pubkeyf " \ + "hab_check_addr " \ + "usb_load_rescuefitf " \ + "hab_check_file_fit; then " \ + "run usbRargs; run rescueboot;" \ "fi; " \ "fi;" \ "fi;" \ - "run dead; " \ "echo RESCUE SYSTEM ON SD OR " \ "USB BOOT FAILURE;" \ + "run dead; " \ "else " \ "usb start;" \ "if usb storage; then " \ - "if run usb_load_rescuefit " \ - "hab_check_file_fit; then " \ - "run rescueboot;" \ + "if run usb_rescue_load_pubkey " \ + "hab_check_addr " \ + "usb_load_rescuefit " \ + "hab_check_file_fit; then " \ + "run usbRargs; run rescueboot;" \ "fi; " \ - "if run usb_load_rescuefitf " \ - "hab_check_file_fit; then " \ - "run rescueboot;" \ + "if run usb_rescue_load_pubkeyf " \ + "hab_check_addr " \ + "usb_load_rescuefitf " \ + "hab_check_file_fit; then " \ + "run usbRargs; run rescueboot;" \ "fi; " \ "fi;" \ - "run dead; " \ "echo RESCUE SYSTEM ON USB BOOT FAILURE;" \ + "run dead; " \ "fi; " \ "else "\ - "if run rescue_load_fit hab_check_file_fit; then " \ - "run rescueboot; " \ + "if run rescue_load_pubkey hab_check_addr " \ + "rescue_load_fit hab_check_file_fit; then " \ + "run mainRargs; run rescueboot; " \ "else " \ - "run dead; " \ "echo RESCUE SYSTEM ON BOARD BOOT FAILURE;" \ + "run dead; " \ "fi; " \ "fi;\0" \ "ari_boot=if test ${bootmode} -ne 0 ; then " \ @@ -388,7 +389,8 @@ "if run loadbootscript hab_check_file_bootscript;" \ "then run bootscript; " \ "fi; " \ - "if run mmc_load_fit hab_check_file_fit; then " \ + "if run mmc_load_pubkey hab_check_addr " \ + "mmc_load_fit hab_check_file_fit; then " \ "if run mmcboot; then ; " \ "else " \ "run mmc_rescue_boot;" \ @@ -421,12 +423,6 @@ #define CONFIG_SYS_FSL_USDHC_NUM 2 -/* NAND stuff */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE 0x40000000 -#define CONFIG_SYS_NAND_5_ADDR_CYCLE -#define CONFIG_SYS_NAND_ONFI_DETECTION - /* DMA stuff, needed for GPMI/MXS NAND support */ /* USB Configs */