From: Rask Ingemann Lambertsen Date: Wed, 18 Jan 2017 20:53:40 +0000 (+0100) Subject: sunxi: power: axp809.c: Fix aldo1-2 being disabled for mvolt != 0 X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=3cc293e26fa87f54d4a4c70448ff99b817c76913;p=u-boot.git sunxi: power: axp809.c: Fix aldo1-2 being disabled for mvolt != 0 The execution flow is currently like this for aldo_num == 1 or 2: int axp_set_aldo(int aldo_num, unsigned int mvolt) { ... if (mvolt == 0) return pmic_bus_clrbits(AXP809_OUTPUT_CTRL1, AXP809_OUTPUT_CTRL1_ALDO1_EN << (aldo_num - 1)); ... return pmic_bus_clrbits(AXP809_OUTPUT_CTRL1, AXP809_OUTPUT_CTRL1_ALDO1_EN << (aldo_num - 1)); } I.e. aldo1 and aldo2 will always be disabled. This patch fixes it by setting (rather than clearing) the enable bit when mvolt != 0. Signed-off-by: Rask Ingemann Lambertsen Fixes: 795857df413a ("sunxi: power: add AXP809 support") --- diff --git a/drivers/power/axp809.c b/drivers/power/axp809.c index c5b608d2f0..5b5cb360ec 100644 --- a/drivers/power/axp809.c +++ b/drivers/power/axp809.c @@ -143,7 +143,7 @@ int axp_set_aldo(int aldo_num, unsigned int mvolt) if (aldo_num == 3) return pmic_bus_setbits(AXP809_OUTPUT_CTRL2, AXP809_OUTPUT_CTRL2_ALDO3_EN); - return pmic_bus_clrbits(AXP809_OUTPUT_CTRL1, + return pmic_bus_setbits(AXP809_OUTPUT_CTRL1, AXP809_OUTPUT_CTRL1_ALDO1_EN << (aldo_num - 1)); }