From: Marcel Ziswiler <marcel@ziswiler.com>
Date: Fri, 11 Sep 2009 11:50:33 +0000 (-0400)
Subject: mpc8260: remove Ethernet node fixup to use generic FDT code.
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=3ca55bce9c8bf00df06a20487fafc16fa2f8084b;p=u-boot.git

mpc8260: remove Ethernet node fixup to use generic FDT code.

Remove Ethernet node fixup from mgcoge and muas3001 boards and modify its
configs for the common mpc8260 code to use generic Ethernet fixup.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@noser.com>
Tested-by: Heiko Schocher <hs@denx.de>
---

diff --git a/board/keymile/mgcoge/mgcoge.c b/board/keymile/mgcoge/mgcoge.c
index d24a4b5769..b16a01ccc5 100644
--- a/board/keymile/mgcoge/mgcoge.c
+++ b/board/keymile/mgcoge/mgcoge.c
@@ -25,7 +25,6 @@
 #include <mpc8260.h>
 #include <ioports.h>
 #include <malloc.h>
-#include <net.h>
 #include <asm/io.h>
 
 #if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
@@ -373,10 +372,6 @@ void ft_blob_update (void *blob, bd_t *bd)
 	flash_reg[5] = cpu_to_be32 (info->size);
 	fdt_set_node_and_value (blob, "/localbus/flash@5,0", "reg", flash_reg,
 				sizeof (flash_reg));
-
-	/* MAC addr */
-	fdt_set_node_and_value (blob, "/soc/cpm/ethernet", "mac-address",
-				bd->bi_enetaddr, sizeof (u8) * 6);
 }
 
 void ft_board_setup (void *blob, bd_t *bd)
diff --git a/board/muas3001/muas3001.c b/board/muas3001/muas3001.c
index bf4ccb6e19..36caed813d 100644
--- a/board/muas3001/muas3001.c
+++ b/board/muas3001/muas3001.c
@@ -342,21 +342,6 @@ void ft_blob_update (void *blob, bd_t *bd)
 		printf ("ft_blob_update(): cannot find /localbus node "
 			"err:%s\n", fdt_strerror (nodeoffset));
 	}
-	/* MAC Adresse */
-	nodeoffset = fdt_path_offset (blob, "/soc/cpm/ethernet");
-	if (nodeoffset >= 0) {
-		uchar ethaddr[6];
-		eth_getenv_enetaddr("ethaddr", ethaddr);
-		ret = fdt_setprop (blob, nodeoffset, "mac-address", ethaddr,
-					sizeof (uchar) * 6);
-	if (ret < 0)
-		printf ("ft_blob_update): cannot set /soc/cpm/ethernet/mac-address "
-			"property err:%s\n", fdt_strerror (ret));
-	} else {
-		/* memory node is required in dts */
-		printf ("ft_blob_update(): cannot find /soc/cpm/ethernet node "
-			"err:%s\n", fdt_strerror (nodeoffset));
-	}
 
 	/* baudrate */
 	nodeoffset = fdt_path_offset (blob, "/soc/cpm/serial");
diff --git a/include/configs/mgcoge.h b/include/configs/mgcoge.h
index ea14948c46..b955749d8f 100644
--- a/include/configs/mgcoge.h
+++ b/include/configs/mgcoge.h
@@ -70,6 +70,7 @@
 #define CONFIG_NET_MULTI	1
 
 #define CONFIG_ETHER_INDEX	4
+#define CONFIG_HAS_ETH0
 #define CONFIG_SYS_SCC_TOUT_LOOP	10000000
 
 # define CONFIG_SYS_CMXSCR_VALUE	(CMXSCR_RS4CS_CLK7 | CMXSCR_TS4CS_CLK8)
diff --git a/include/configs/muas3001.h b/include/configs/muas3001.h
index f031a17b27..ae033b2da5 100644
--- a/include/configs/muas3001.h
+++ b/include/configs/muas3001.h
@@ -74,6 +74,7 @@
 
 #define CONFIG_ETHER_INDEX	1
 #define CONFIG_ETHER_ON_FCC1
+#define CONFIG_HAS_ETH0
 #define FCC_ENET
 
 /*