From: Marek Vasut Date: Tue, 21 Jul 2015 03:00:42 +0000 (+0200) Subject: ddr: altera: Clean up rw_mgr_mem_calibrate_writes_center() part 1 X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=3b44f55c3b9ecc570cde507a826245974bf11af6;p=u-boot.git ddr: altera: Clean up rw_mgr_mem_calibrate_writes_center() part 1 Fix data types and constify where applicable, fix broken multiline debug strings and fix comments. No functional change. Signed-off-by: Marek Vasut --- diff --git a/drivers/ddr/altera/sequencer.c b/drivers/ddr/altera/sequencer.c index b81fc8c358..e99ecb4a87 100644 --- a/drivers/ddr/altera/sequencer.c +++ b/drivers/ddr/altera/sequencer.c @@ -2887,24 +2887,26 @@ static uint32_t rw_mgr_mem_calibrate_write_test(uint32_t rank_bgn, * center all windows. do per-bit-deskew to possibly increase size of * certain windows. */ -static uint32_t rw_mgr_mem_calibrate_writes_center(uint32_t rank_bgn, - uint32_t write_group, uint32_t test_bgn) +static int +rw_mgr_mem_calibrate_writes_center(const u32 rank_bgn, const u32 write_group, + const u32 test_bgn) { - uint32_t i, min_index; - int32_t d; - /* - * Store these as signed since there are comparisons with - * signed numbers. - */ - uint32_t bit_chk; - uint32_t sticky_bit_chk; - int32_t left_edge[RW_MGR_MEM_DQ_PER_WRITE_DQS]; - int32_t right_edge[RW_MGR_MEM_DQ_PER_WRITE_DQS]; - int32_t mid; - int32_t mid_min, orig_mid_min; - int32_t new_dqs, start_dqs; - int32_t dq_margin, dqs_margin, dm_margin; - uint32_t addr; + int i, d; + u32 bit_chk; + u32 sticky_bit_chk; + u32 min_index; + u32 addr; + int left_edge[RW_MGR_MEM_DQ_PER_WRITE_DQS]; + int right_edge[RW_MGR_MEM_DQ_PER_WRITE_DQS]; + int mid; + int mid_min, orig_mid_min; + int new_dqs, start_dqs; + int dq_margin, dqs_margin, dm_margin; + int bgn_curr = IO_IO_OUT1_DELAY_MAX + 1; + int end_curr = IO_IO_OUT1_DELAY_MAX + 1; + int bgn_best = IO_IO_OUT1_DELAY_MAX + 1; + int end_best = IO_IO_OUT1_DELAY_MAX + 1; + int win_best = 0; int ret; @@ -2916,11 +2918,11 @@ static uint32_t rw_mgr_mem_calibrate_writes_center(uint32_t rank_bgn, start_dqs = readl(addr + (RW_MGR_MEM_DQ_PER_WRITE_DQS << 2)); - /* per-bit deskew */ + /* Per-bit deskew. */ /* - * set the left and right edge of each bit to an illegal value - * use (IO_IO_OUT1_DELAY_MAX + 1) as an illegal value. + * Set the left and right edge of each bit to an illegal value. + * Use (IO_IO_OUT1_DELAY_MAX + 1) as an illegal value. */ sticky_bit_chk = 0; for (i = 0; i < RW_MGR_MEM_DQ_PER_WRITE_DQS; i++) { @@ -2928,12 +2930,12 @@ static uint32_t rw_mgr_mem_calibrate_writes_center(uint32_t rank_bgn, right_edge[i] = IO_IO_OUT1_DELAY_MAX + 1; } - /* Search for the left edge of the window for each bit */ + /* Search for the left edge of the window for each bit. */ search_left_edge(1, rank_bgn, write_group, 0, test_bgn, &sticky_bit_chk, left_edge, right_edge, 0); - /* Search for the right edge of the window for each bit */ + /* Search for the right edge of the window for each bit. */ ret = search_right_edge(1, rank_bgn, write_group, 0, start_dqs, 0, &sticky_bit_chk, @@ -2946,12 +2948,13 @@ static uint32_t rw_mgr_mem_calibrate_writes_center(uint32_t rank_bgn, min_index = get_window_mid_index(1, left_edge, right_edge, &mid_min); - /* Determine the amount we can change DQS (which is -mid_min) */ + /* Determine the amount we can change DQS (which is -mid_min). */ orig_mid_min = mid_min; new_dqs = start_dqs; mid_min = 0; - debug_cond(DLEVEL == 1, "%s:%d write_center: start_dqs=%d new_dqs=%d \ - mid_min=%d\n", __func__, __LINE__, start_dqs, new_dqs, mid_min); + debug_cond(DLEVEL == 1, + "%s:%d write_center: start_dqs=%d new_dqs=%d mid_min=%d\n", + __func__, __LINE__, start_dqs, new_dqs, mid_min); /* Add delay to bring centre of all DQ windows to the same "level". */ center_dq_windows(1, left_edge, right_edge, mid_min, orig_mid_min, @@ -2965,18 +2968,13 @@ static uint32_t rw_mgr_mem_calibrate_writes_center(uint32_t rank_bgn, debug_cond(DLEVEL == 2, "%s:%d write_center: DM\n", __func__, __LINE__); /* - * set the left and right edge of each bit to an illegal value, - * use (IO_IO_OUT1_DELAY_MAX + 1) as an illegal value, + * Set the left and right edge of each bit to an illegal value. + * Use (IO_IO_OUT1_DELAY_MAX + 1) as an illegal value. */ left_edge[0] = IO_IO_OUT1_DELAY_MAX + 1; right_edge[0] = IO_IO_OUT1_DELAY_MAX + 1; - int32_t bgn_curr = IO_IO_OUT1_DELAY_MAX + 1; - int32_t end_curr = IO_IO_OUT1_DELAY_MAX + 1; - int32_t bgn_best = IO_IO_OUT1_DELAY_MAX + 1; - int32_t end_best = IO_IO_OUT1_DELAY_MAX + 1; - int32_t win_best = 0; - /* Search for the/part of the window with DM shift */ + /* Search for the/part of the window with DM shift. */ for (d = IO_IO_OUT1_DELAY_MAX; d >= 0; d -= DELTA_D) { scc_mgr_apply_group_dm_out1_delay(d); writel(0, &sdr_scc_mgr->update); @@ -2984,7 +2982,7 @@ static uint32_t rw_mgr_mem_calibrate_writes_center(uint32_t rank_bgn, if (rw_mgr_mem_calibrate_write_test(rank_bgn, write_group, 1, PASS_ALL_BITS, &bit_chk, 0)) { - /* USE Set current end of the window */ + /* Set current end of the window. */ end_curr = -d; /* * If a starting edge of our window has not been seen @@ -3003,26 +3001,26 @@ static uint32_t rw_mgr_mem_calibrate_writes_center(uint32_t rank_bgn, end_best = end_curr; } } else { - /* We just saw a failing test. Reset temp edge */ + /* We just saw a failing test. Reset temp edge. */ bgn_curr = IO_IO_OUT1_DELAY_MAX + 1; end_curr = IO_IO_OUT1_DELAY_MAX + 1; - } } + } - - /* Reset DM delay chains to 0 */ + /* Reset DM delay chains to 0. */ scc_mgr_apply_group_dm_out1_delay(0); /* * Check to see if the current window nudges up aganist 0 delay. * If so we need to continue the search by shifting DQS otherwise DQS - * search begins as a new search. */ + * search begins as a new search. + */ if (end_curr != 0) { bgn_curr = IO_IO_OUT1_DELAY_MAX + 1; end_curr = IO_IO_OUT1_DELAY_MAX + 1; } - /* Search for the/part of the window with DQS shifts */ + /* Search for the/part of the window with DQS shifts. */ for (d = 0; d <= IO_IO_OUT1_DELAY_MAX - new_dqs; d += DELTA_D) { /* * Note: This only shifts DQS, so are we limiting ourselve to @@ -3035,7 +3033,7 @@ static uint32_t rw_mgr_mem_calibrate_writes_center(uint32_t rank_bgn, if (rw_mgr_mem_calibrate_write_test(rank_bgn, write_group, 1, PASS_ALL_BITS, &bit_chk, 0)) { - /* USE Set current end of the window */ + /* Set current end of the window. */ end_curr = d; /* * If a beginning edge of our window has not been seen @@ -3054,40 +3052,42 @@ static uint32_t rw_mgr_mem_calibrate_writes_center(uint32_t rank_bgn, end_best = end_curr; } } else { - /* We just saw a failing test. Reset temp edge */ + /* We just saw a failing test. Reset temp edge. */ bgn_curr = IO_IO_OUT1_DELAY_MAX + 1; end_curr = IO_IO_OUT1_DELAY_MAX + 1; - /* Early exit optimization: if ther remaining delay - chain space is less than already seen largest window - we can exit */ + /* + * Early exit optimization: if the remaining delay + * chain space is less than already seen largest + * window we can exit. + */ if ((win_best-1) > (IO_IO_OUT1_DELAY_MAX - new_dqs - d)) { break; - } } } + } - /* assign left and right edge for cal and reporting; */ - left_edge[0] = -1*bgn_best; + /* Assign left and right edge for cal and reporting. */ + left_edge[0] = -1 * bgn_best; right_edge[0] = end_best; - debug_cond(DLEVEL == 2, "%s:%d dm_calib: left=%d right=%d\n", __func__, - __LINE__, left_edge[0], right_edge[0]); + debug_cond(DLEVEL == 2, "%s:%d dm_calib: left=%d right=%d\n", + __func__, __LINE__, left_edge[0], right_edge[0]); - /* Move DQS (back to orig) */ + /* Move DQS (back to orig). */ scc_mgr_apply_group_dqs_io_and_oct_out1(write_group, new_dqs); /* Move DM */ - /* Find middle of window for the DM bit */ + /* Find middle of window for the DM bit. */ mid = (left_edge[0] - right_edge[0]) / 2; - /* only move right, since we are not moving DQS/DQ */ + /* Only move right, since we are not moving DQS/DQ. */ if (mid < 0) mid = 0; - /* dm_marign should fail if we never find a window */ + /* dm_marign should fail if we never find a window. */ if (win_best == 0) dm_margin = -1; else @@ -3096,21 +3096,23 @@ static uint32_t rw_mgr_mem_calibrate_writes_center(uint32_t rank_bgn, scc_mgr_apply_group_dm_out1_delay(mid); writel(0, &sdr_scc_mgr->update); - debug_cond(DLEVEL == 2, "%s:%d dm_calib: left=%d right=%d mid=%d \ - dm_margin=%d\n", __func__, __LINE__, left_edge[0], - right_edge[0], mid, dm_margin); - /* Export values */ + debug_cond(DLEVEL == 2, + "%s:%d dm_calib: left=%d right=%d mid=%d dm_margin=%d\n", + __func__, __LINE__, left_edge[0], right_edge[0], + mid, dm_margin); + /* Export values. */ gbl->fom_out += dq_margin + dqs_margin; - debug_cond(DLEVEL == 2, "%s:%d write_center: dq_margin=%d \ - dqs_margin=%d dm_margin=%d\n", __func__, __LINE__, - dq_margin, dqs_margin, dm_margin); + debug_cond(DLEVEL == 2, + "%s:%d write_center: dq_margin=%d dqs_margin=%d dm_margin=%d\n", + __func__, __LINE__, dq_margin, dqs_margin, dm_margin); /* * Do not remove this line as it makes sure all of our * decisions have been applied. */ writel(0, &sdr_scc_mgr->update); + return (dq_margin >= 0) && (dqs_margin >= 0) && (dm_margin >= 0); }