From: Xiangfu Liu Date: Wed, 12 Oct 2011 04:24:06 +0000 (+0800) Subject: MIPS: Jz4740: Add NAND driver X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=3a6591a86a94f8bc0d552211e5422fe5cf91c2b9;p=u-boot.git MIPS: Jz4740: Add NAND driver Jz4740 NAND flash controller can support: * MLC NAND as well as SLC NAND * all 8-bit/16-bit NAND flash devices * HAMMING and RS hardware ECC * automatic boot up from NAND flash devices nand_ecclayout is set up for 2GiB NAND chip mounted in Qi LB60. We'll bring up boot-from-NAND support in nand_spl/ in the future. Signed-off-by: Xiangfu Liu Acked-by: Daniel Signed-off-by: Shinya Kuribayashi --- diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index dae244299a..1eeba5cf21 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -45,6 +45,7 @@ COBJS-$(CONFIG_NAND_DAVINCI) += davinci_nand.o COBJS-$(CONFIG_NAND_FSL_ELBC) += fsl_elbc_nand.o COBJS-$(CONFIG_NAND_FSL_IFC) += fsl_ifc_nand.o COBJS-$(CONFIG_NAND_FSL_UPM) += fsl_upm.o +COBJS-$(CONFIG_NAND_JZ4740) += jz4740_nand.o COBJS-$(CONFIG_NAND_KB9202) += kb9202_nand.o COBJS-$(CONFIG_NAND_KIRKWOOD) += kirkwood_nand.o COBJS-$(CONFIG_NAND_KMETER1) += kmeter1_nand.o diff --git a/drivers/mtd/nand/jz4740_nand.c b/drivers/mtd/nand/jz4740_nand.c new file mode 100644 index 0000000000..3ec34f3c9b --- /dev/null +++ b/drivers/mtd/nand/jz4740_nand.c @@ -0,0 +1,261 @@ +/* + * Platform independend driver for JZ4740. + * + * Copyright (c) 2007 Ingenic Semiconductor Inc. + * Author: + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ +#include + +#include +#include +#include + +#define JZ_NAND_DATA_ADDR ((void __iomem *)0xB8000000) +#define JZ_NAND_CMD_ADDR (JZ_NAND_DATA_ADDR + 0x8000) +#define JZ_NAND_ADDR_ADDR (JZ_NAND_DATA_ADDR + 0x10000) + +#define BIT(x) (1 << (x)) +#define JZ_NAND_ECC_CTRL_ENCODING BIT(3) +#define JZ_NAND_ECC_CTRL_RS BIT(2) +#define JZ_NAND_ECC_CTRL_RESET BIT(1) +#define JZ_NAND_ECC_CTRL_ENABLE BIT(0) + +#define EMC_SMCR1_OPT_NAND 0x094c4400 +/* Optimize the timing of nand */ + +static struct jz4740_emc * emc = (struct jz4740_emc *)JZ4740_EMC_BASE; + +static struct nand_ecclayout qi_lb60_ecclayout_2gb = { + .eccbytes = 72, + .eccpos = { + 12, 13, 14, 15, 16, 17, 18, 19, + 20, 21, 22, 23, 24, 25, 26, 27, + 28, 29, 30, 31, 32, 33, 34, 35, + 36, 37, 38, 39, 40, 41, 42, 43, + 44, 45, 46, 47, 48, 49, 50, 51, + 52, 53, 54, 55, 56, 57, 58, 59, + 60, 61, 62, 63, 64, 65, 66, 67, + 68, 69, 70, 71, 72, 73, 74, 75, + 76, 77, 78, 79, 80, 81, 82, 83 }, + .oobfree = { + {.offset = 2, + .length = 10 }, + {.offset = 84, + .length = 44 } } +}; + +static int is_reading; + +static void jz_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + uint32_t reg; + + if (ctrl & NAND_CTRL_CHANGE) { + if (ctrl & NAND_ALE) + this->IO_ADDR_W = JZ_NAND_ADDR_ADDR; + else if (ctrl & NAND_CLE) + this->IO_ADDR_W = JZ_NAND_CMD_ADDR; + else + this->IO_ADDR_W = JZ_NAND_DATA_ADDR; + + reg = readl(&emc->nfcsr); + if (ctrl & NAND_NCE) + reg |= EMC_NFCSR_NFCE1; + else + reg &= ~EMC_NFCSR_NFCE1; + writel(reg, &emc->nfcsr); + } + + if (cmd != NAND_CMD_NONE) + writeb(cmd, this->IO_ADDR_W); +} + +static int jz_nand_device_ready(struct mtd_info *mtd) +{ + return (readl(GPIO_PXPIN(2)) & 0x40000000) ? 1 : 0; +} + +void board_nand_select_device(struct nand_chip *nand, int chip) +{ + /* + * Don't use "chip" to address the NAND device, + * generate the cs from the address where it is encoded. + */ +} + +static int jz_nand_rs_calculate_ecc(struct mtd_info *mtd, const u_char *dat, + u_char *ecc_code) +{ + uint32_t status; + int i; + + if (is_reading) + return 0; + + do { + status = readl(&emc->nfints); + } while (!(status & EMC_NFINTS_ENCF)); + + /* disable ecc */ + writel(readl(&emc->nfecr) & ~EMC_NFECR_ECCE, &emc->nfecr); + + for (i = 0; i < 9; i++) + ecc_code[i] = readb(&emc->nfpar[i]); + + return 0; +} + +static void jz_nand_hwctl(struct mtd_info *mtd, int mode) +{ + uint32_t reg; + + writel(0, &emc->nfints); + reg = readl(&emc->nfecr); + reg |= JZ_NAND_ECC_CTRL_RESET; + reg |= JZ_NAND_ECC_CTRL_ENABLE; + reg |= JZ_NAND_ECC_CTRL_RS; + + switch (mode) { + case NAND_ECC_READ: + reg &= ~JZ_NAND_ECC_CTRL_ENCODING; + is_reading = 1; + break; + case NAND_ECC_WRITE: + reg |= JZ_NAND_ECC_CTRL_ENCODING; + is_reading = 0; + break; + default: + break; + } + + writel(reg, &emc->nfecr); +} + +/* Correct 1~9-bit errors in 512-bytes data */ +static void jz_rs_correct(unsigned char *dat, int idx, int mask) +{ + int i; + + idx--; + + i = idx + (idx >> 3); + if (i >= 512) + return; + + mask <<= (idx & 0x7); + + dat[i] ^= mask & 0xff; + if (i < 511) + dat[i + 1] ^= (mask >> 8) & 0xff; +} + +static int jz_nand_rs_correct_data(struct mtd_info *mtd, u_char *dat, + u_char *read_ecc, u_char *calc_ecc) +{ + int k; + uint32_t errcnt, index, mask, status; + + /* Set PAR values */ + const uint8_t all_ff_ecc[] = { + 0xcd, 0x9d, 0x90, 0x58, 0xf4, 0x8b, 0xff, 0xb7, 0x6f }; + + if (read_ecc[0] == 0xff && read_ecc[1] == 0xff && + read_ecc[2] == 0xff && read_ecc[3] == 0xff && + read_ecc[4] == 0xff && read_ecc[5] == 0xff && + read_ecc[6] == 0xff && read_ecc[7] == 0xff && + read_ecc[8] == 0xff) { + for (k = 0; k < 9; k++) + writeb(all_ff_ecc[k], &emc->nfpar[k]); + } else { + for (k = 0; k < 9; k++) + writeb(read_ecc[k], &emc->nfpar[k]); + } + /* Set PRDY */ + writel(readl(&emc->nfecr) | EMC_NFECR_PRDY, &emc->nfecr); + + /* Wait for completion */ + do { + status = readl(&emc->nfints); + } while (!(status & EMC_NFINTS_DECF)); + + /* disable ecc */ + writel(readl(&emc->nfecr) & ~EMC_NFECR_ECCE, &emc->nfecr); + + /* Check decoding */ + if (!(status & EMC_NFINTS_ERR)) + return 0; + + if (status & EMC_NFINTS_UNCOR) { + printf("uncorrectable ecc\n"); + return -1; + } + + errcnt = (status & EMC_NFINTS_ERRCNT_MASK) >> EMC_NFINTS_ERRCNT_BIT; + + switch (errcnt) { + case 4: + index = (readl(&emc->nferr[3]) & EMC_NFERR_INDEX_MASK) >> + EMC_NFERR_INDEX_BIT; + mask = (readl(&emc->nferr[3]) & EMC_NFERR_MASK_MASK) >> + EMC_NFERR_MASK_BIT; + jz_rs_correct(dat, index, mask); + case 3: + index = (readl(&emc->nferr[2]) & EMC_NFERR_INDEX_MASK) >> + EMC_NFERR_INDEX_BIT; + mask = (readl(&emc->nferr[2]) & EMC_NFERR_MASK_MASK) >> + EMC_NFERR_MASK_BIT; + jz_rs_correct(dat, index, mask); + case 2: + index = (readl(&emc->nferr[1]) & EMC_NFERR_INDEX_MASK) >> + EMC_NFERR_INDEX_BIT; + mask = (readl(&emc->nferr[1]) & EMC_NFERR_MASK_MASK) >> + EMC_NFERR_MASK_BIT; + jz_rs_correct(dat, index, mask); + case 1: + index = (readl(&emc->nferr[0]) & EMC_NFERR_INDEX_MASK) >> + EMC_NFERR_INDEX_BIT; + mask = (readl(&emc->nferr[0]) & EMC_NFERR_MASK_MASK) >> + EMC_NFERR_MASK_BIT; + jz_rs_correct(dat, index, mask); + default: + break; + } + + return errcnt; +} + +/* + * Main initialization routine + */ +int board_nand_init(struct nand_chip *nand) +{ + uint32_t reg; + + reg = readl(&emc->nfcsr); + reg |= EMC_NFCSR_NFE1; /* EMC setup, Set NFE bit */ + writel(reg, &emc->nfcsr); + + writel(EMC_SMCR1_OPT_NAND, &emc->smcr[1]); + + nand->IO_ADDR_R = JZ_NAND_DATA_ADDR; + nand->IO_ADDR_W = JZ_NAND_DATA_ADDR; + nand->cmd_ctrl = jz_nand_cmd_ctrl; + nand->dev_ready = jz_nand_device_ready; + nand->ecc.hwctl = jz_nand_hwctl; + nand->ecc.correct = jz_nand_rs_correct_data; + nand->ecc.calculate = jz_nand_rs_calculate_ecc; + nand->ecc.mode = NAND_ECC_HW_OOB_FIRST; + nand->ecc.size = CONFIG_SYS_NAND_ECCSIZE; + nand->ecc.bytes = CONFIG_SYS_NAND_ECCBYTES; + nand->ecc.layout = &qi_lb60_ecclayout_2gb; + nand->chip_delay = 50; + nand->options = NAND_USE_FLASH_BBT; + + return 0; +}