From: Marek Vasut Date: Tue, 10 Nov 2015 19:53:29 +0000 (+0100) Subject: eeprom: Pull out transfer length computation X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=39b6f98bd55541a89eddaf59effeb75f6fe631f6;p=u-boot.git eeprom: Pull out transfer length computation Pull out the code which computes the length of the transfer into separate code and clean it up a little. This again trims down the code duplication. Signed-off-by: Marek Vasut Cc: Simon Glass Cc: Tom Rini Cc: Heiko Schocher Reviewed-by: Heiko Schocher --- diff --git a/common/cmd_eeprom.c b/common/cmd_eeprom.c index 162a05c648..b39ca5d94d 100644 --- a/common/cmd_eeprom.c +++ b/common/cmd_eeprom.c @@ -95,6 +95,29 @@ static int eeprom_addr(unsigned dev_addr, unsigned offset, uchar *addr) return alen; } +static int eeprom_len(unsigned offset, unsigned end) +{ + unsigned len = end - offset; + + /* + * For a FRAM device there is no limit on the number of the + * bytes that can be ccessed with the single read or write + * operation. + */ +#if !defined(CONFIG_SYS_I2C_FRAM) + unsigned blk_off = offset & 0xff; + unsigned maxlen = EEPROM_PAGE_SIZE - EEPROM_PAGE_OFFSET(blk_off); + + if (maxlen > I2C_RXTX_LEN) + maxlen = I2C_RXTX_LEN; + + if (len > maxlen) + len = maxlen; +#endif + + return len; +} + static int eeprom_rw_block(unsigned offset, uchar *addr, unsigned alen, uchar *buffer, unsigned len, bool read) { @@ -126,7 +149,6 @@ static int eeprom_rw_block(unsigned offset, uchar *addr, unsigned alen, int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt) { unsigned end = offset + cnt; - unsigned blk_off; int rcode = 0; uchar addr[3]; @@ -137,27 +159,10 @@ int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt */ while (offset < end) { unsigned alen, len; -#if !defined(CONFIG_SYS_I2C_FRAM) - unsigned maxlen; -#endif - blk_off = offset & 0xFF; /* block offset */ alen = eeprom_addr(dev_addr, offset, addr); - len = end - offset; - - /* - * For a FRAM device there is no limit on the number of the - * bytes that can be ccessed with the single read or write - * operation. - */ -#if !defined(CONFIG_SYS_I2C_FRAM) - maxlen = 0x100 - blk_off; - if (maxlen > I2C_RXTX_LEN) - maxlen = I2C_RXTX_LEN; - if (len > maxlen) - len = maxlen; -#endif + len = eeprom_len(offset, end); rcode = eeprom_rw_block(offset, addr, alen, buffer, len, 1); @@ -171,7 +176,6 @@ int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt) { unsigned end = offset + cnt; - unsigned blk_off; int rcode = 0; uchar addr[3]; @@ -185,30 +189,10 @@ int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cn while (offset < end) { unsigned alen, len; -#if !defined(CONFIG_SYS_I2C_FRAM) - unsigned maxlen; -#endif - blk_off = offset & 0xFF; /* block offset */ alen = eeprom_addr(dev_addr, offset, addr); - len = end - offset; - - /* - * For a FRAM device there is no limit on the number of the - * bytes that can be accessed with the single read or write - * operation. - */ -#if !defined(CONFIG_SYS_I2C_FRAM) - - maxlen = EEPROM_PAGE_SIZE - EEPROM_PAGE_OFFSET(blk_off); - - if (maxlen > I2C_RXTX_LEN) - maxlen = I2C_RXTX_LEN; - - if (len > maxlen) - len = maxlen; -#endif + len = eeprom_len(offset, end); rcode = eeprom_rw_block(offset, addr, alen, buffer, len, 0);