From: Joel A Fernandes <joelagnel@ti.com>
Date: Tue, 25 Sep 2012 06:49:47 +0000 (+0000)
Subject: am33xx: Enable DDR3 for DDR3 version of beaglebone
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=391a741162861a887fd226e53048aad2daed62fd;p=u-boot.git

am33xx: Enable DDR3 for DDR3 version of beaglebone

DDR3 support is tested and working with beaglebone hardware. Include a check
for this board type and configure DDR3. The timings and other configuration
match EVM SK.

Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
Acked-by: Jason Kridner <jdk@ti.com>
---

diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c
index 978b184fb2..6de03fd657 100644
--- a/arch/arm/cpu/armv7/am33xx/board.c
+++ b/arch/arm/cpu/armv7/am33xx/board.c
@@ -64,6 +64,11 @@ static inline int board_is_bone(void)
 	return !strncmp(header.name, "A335BONE", HDR_NAME_LEN);
 }
 
+static inline int board_is_bone_lt(void)
+{
+	return !strncmp(header.name, "A335BNLT", HDR_NAME_LEN);
+}
+
 static inline int board_is_evm_sk(void)
 {
 	return !strncmp("A335X_SK", header.name, HDR_NAME_LEN);
@@ -124,7 +129,7 @@ static int read_eeprom(void)
 static short inline board_memory_type(void)
 {
 	/* The following boards are known to use DDR3. */
-	if (board_is_evm_sk())
+	if (board_is_evm_sk() || board_is_bone_lt())
 		return EMIF_REG_SDRAM_TYPE_DDR3;
 
 	return EMIF_REG_SDRAM_TYPE_DDR2;
@@ -285,7 +290,7 @@ int board_eth_init(bd_t *bis)
 			return -1;
 	}
 
-	if (board_is_bone()) {
+	if (board_is_bone() || board_is_bone_lt()) {
 		writel(MII_MODE_ENABLE, &cdev->miisel);
 		cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if =
 				PHY_INTERFACE_MODE_MII;