From: Patrick Delaunay Date: Mon, 25 May 2020 10:19:44 +0000 (+0200) Subject: stm32mp1: clk: configure pll1 with OPP X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=37ad8377af00128adc47fb1192142ac9dfbf1f9d;p=u-boot.git stm32mp1: clk: configure pll1 with OPP The PLL1 node (st,pll1) is optional in device tree, the max supported frequency define in OPP node is used when the node is absent. Signed-off-by: Patrick Delaunay Reviewed-by: Patrice Chotard --- diff --git a/doc/device-tree-bindings/clock/st,stm32mp1.txt b/doc/device-tree-bindings/clock/st,stm32mp1.txt index a3d427911d..4d4136d2fc 100644 --- a/doc/device-tree-bindings/clock/st,stm32mp1.txt +++ b/doc/device-tree-bindings/clock/st,stm32mp1.txt @@ -87,6 +87,10 @@ Optional Properties: are listed with associated reg 0 to 3. PLLx is off when the associated node is absent or deactivated. + For PLL1, when the node is absent, the frequency of the OPP node is used + to compute the PLL setting (see compatible "operating-points-v2" in + opp/opp.txt for details). + Here are the available properties for each PLL node: - compatible: should be "st,stm32mp1-pll" diff --git a/drivers/clk/clk_stm32mp1.c b/drivers/clk/clk_stm32mp1.c index 6c5eddbd9a..8acbad25f9 100644 --- a/drivers/clk/clk_stm32mp1.c +++ b/drivers/clk/clk_stm32mp1.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include @@ -644,8 +645,18 @@ static const struct stm32mp1_clk_sel stm32mp1_clk_sel[_PARENT_SEL_NB] = { }; #ifdef STM32MP1_CLOCK_TREE_INIT + /* define characteristic of PLL according type */ +#define DIVM_MIN 0 +#define DIVM_MAX 63 #define DIVN_MIN 24 +#define DIVP_MIN 0 +#define DIVP_MAX 127 +#define FRAC_MAX 8192 + +#define PLL1600_VCO_MIN 800000000 +#define PLL1600_VCO_MAX 1600000000 + static const struct stm32mp1_pll stm32mp1_pll[PLL_TYPE_NB] = { [PLL_800] = { .refclk_min = 4, @@ -1190,6 +1201,208 @@ static ulong stm32mp1_clk_get_rate(struct clk *clk) } #ifdef STM32MP1_CLOCK_TREE_INIT + +bool stm32mp1_supports_opp(u32 opp_id, u32 cpu_type) +{ + unsigned int id; + + switch (opp_id) { + case 1: + case 2: + id = opp_id; + break; + default: + id = 1; /* default value */ + break; + } + + switch (cpu_type) { + case CPU_STM32MP157Fxx: + case CPU_STM32MP157Dxx: + case CPU_STM32MP153Fxx: + case CPU_STM32MP153Dxx: + case CPU_STM32MP151Fxx: + case CPU_STM32MP151Dxx: + return true; + default: + return id == 1; + } +} + +/* + * gets OPP parameters (frequency in KHz and voltage in mV) from + * an OPP table subnode. Platform HW support capabilities are also checked. + * Returns 0 on success and a negative FDT error code on failure. + */ +static int stm32mp1_get_opp(u32 cpu_type, ofnode subnode, + u32 *freq_khz, u32 *voltage_mv) +{ + u32 opp_hw; + u64 read_freq_64; + u32 read_voltage_32; + + *freq_khz = 0; + *voltage_mv = 0; + + opp_hw = ofnode_read_u32_default(subnode, "opp-supported-hw", 0); + if (opp_hw) + if (!stm32mp1_supports_opp(opp_hw, cpu_type)) + return -FDT_ERR_BADVALUE; + + read_freq_64 = ofnode_read_u64_default(subnode, "opp-hz", 0) / + 1000ULL; + read_voltage_32 = ofnode_read_u32_default(subnode, "opp-microvolt", 0) / + 1000U; + + if (!read_voltage_32 || !read_freq_64) + return -FDT_ERR_NOTFOUND; + + /* Frequency value expressed in KHz must fit on 32 bits */ + if (read_freq_64 > U32_MAX) + return -FDT_ERR_BADVALUE; + + /* Millivolt value must fit on 16 bits */ + if (read_voltage_32 > U16_MAX) + return -FDT_ERR_BADVALUE; + + *freq_khz = (u32)read_freq_64; + *voltage_mv = read_voltage_32; + + return 0; +} + +/* + * parses OPP table in DT and finds the parameters for the + * highest frequency supported by the HW platform. + * Returns 0 on success and a negative FDT error code on failure. + */ +int stm32mp1_get_max_opp_freq(struct stm32mp1_clk_priv *priv, u64 *freq_hz) +{ + ofnode node, subnode; + int ret; + u32 freq = 0U, voltage = 0U; + u32 cpu_type = get_cpu_type(); + + node = ofnode_by_compatible(ofnode_null(), "operating-points-v2"); + if (!ofnode_valid(node)) + return -FDT_ERR_NOTFOUND; + + ofnode_for_each_subnode(subnode, node) { + unsigned int read_freq; + unsigned int read_voltage; + + ret = stm32mp1_get_opp(cpu_type, subnode, + &read_freq, &read_voltage); + if (ret) + continue; + + if (read_freq > freq) { + freq = read_freq; + voltage = read_voltage; + } + } + + if (!freq || !voltage) + return -FDT_ERR_NOTFOUND; + + *freq_hz = (u64)1000U * freq; + + return 0; +} + +static int stm32mp1_pll1_opp(struct stm32mp1_clk_priv *priv, int clksrc, + u32 *pllcfg, u32 *fracv) +{ + u32 post_divm; + u32 input_freq; + u64 output_freq; + u64 freq; + u64 vco; + u32 divm, divn, divp, frac; + int i, ret; + u32 diff; + u32 best_diff = U32_MAX; + + /* PLL1 is 1600 */ + const u32 DIVN_MAX = stm32mp1_pll[PLL_1600].divn_max; + const u32 POST_DIVM_MIN = stm32mp1_pll[PLL_1600].refclk_min * 1000000U; + const u32 POST_DIVM_MAX = stm32mp1_pll[PLL_1600].refclk_max * 1000000U; + + ret = stm32mp1_get_max_opp_freq(priv, &output_freq); + if (ret) { + debug("PLL1 OPP configuration not found (%d).\n", ret); + return ret; + } + + switch (clksrc) { + case CLK_PLL12_HSI: + input_freq = stm32mp1_clk_get_fixed(priv, _HSI); + break; + case CLK_PLL12_HSE: + input_freq = stm32mp1_clk_get_fixed(priv, _HSE); + break; + default: + return -EINTR; + } + + /* Following parameters have always the same value */ + pllcfg[PLLCFG_Q] = 0; + pllcfg[PLLCFG_R] = 0; + pllcfg[PLLCFG_O] = PQR(1, 0, 0); + + for (divm = DIVM_MAX; divm >= DIVM_MIN; divm--) { + post_divm = (u32)(input_freq / (divm + 1)); + if (post_divm < POST_DIVM_MIN || post_divm > POST_DIVM_MAX) + continue; + + for (divp = DIVP_MIN; divp <= DIVP_MAX; divp++) { + freq = output_freq * (divm + 1) * (divp + 1); + divn = (u32)((freq / input_freq) - 1); + if (divn < DIVN_MIN || divn > DIVN_MAX) + continue; + + frac = (u32)(((freq * FRAC_MAX) / input_freq) - + ((divn + 1) * FRAC_MAX)); + /* 2 loops to refine the fractional part */ + for (i = 2; i != 0; i--) { + if (frac > FRAC_MAX) + break; + + vco = (post_divm * (divn + 1)) + + ((post_divm * (u64)frac) / + FRAC_MAX); + if (vco < (PLL1600_VCO_MIN / 2) || + vco > (PLL1600_VCO_MAX / 2)) { + frac++; + continue; + } + freq = vco / (divp + 1); + if (output_freq < freq) + diff = (u32)(freq - output_freq); + else + diff = (u32)(output_freq - freq); + if (diff < best_diff) { + pllcfg[PLLCFG_M] = divm; + pllcfg[PLLCFG_N] = divn; + pllcfg[PLLCFG_P] = divp; + *fracv = frac; + + if (diff == 0) + return 0; + + best_diff = diff; + } + frac++; + } + } + } + + if (best_diff == U32_MAX) + return -1; + + return 0; +} + static void stm32mp1_ls_osc_set(int enable, fdt_addr_t rcc, u32 offset, u32 mask_on) { @@ -1661,9 +1874,12 @@ static int stm32mp1_clktree(struct udevice *dev) unsigned int clksrc[CLKSRC_NB]; unsigned int clkdiv[CLKDIV_NB]; unsigned int pllcfg[_PLL_NB][PLLCFG_NB]; - ofnode plloff[_PLL_NB]; - int ret, len; - uint i; + unsigned int pllfracv[_PLL_NB]; + unsigned int pllcsg[_PLL_NB][PLLCSG_NB]; + bool pllcfg_valid[_PLL_NB]; + bool pllcsg_set[_PLL_NB]; + int ret; + int i, len; int lse_css = 0; const u32 *pkcs_cell; @@ -1683,16 +1899,43 @@ static int stm32mp1_clktree(struct udevice *dev) /* check mandatory field in each pll */ for (i = 0; i < _PLL_NB; i++) { char name[12]; + ofnode node; sprintf(name, "st,pll@%d", i); - plloff[i] = dev_read_subnode(dev, name); - if (!ofnode_valid(plloff[i])) - continue; - ret = ofnode_read_u32_array(plloff[i], "cfg", - pllcfg[i], PLLCFG_NB); - if (ret < 0) { - debug("field cfg invalid: error %d\n", ret); - return -FDT_ERR_NOTFOUND; + node = dev_read_subnode(dev, name); + pllcfg_valid[i] = ofnode_valid(node); + pllcsg_set[i] = false; + if (pllcfg_valid[i]) { + debug("DT for PLL %d @ %s\n", i, name); + ret = ofnode_read_u32_array(node, "cfg", + pllcfg[i], PLLCFG_NB); + if (ret < 0) { + debug("field cfg invalid: error %d\n", ret); + return -FDT_ERR_NOTFOUND; + } + pllfracv[i] = ofnode_read_u32_default(node, "frac", 0); + + ret = ofnode_read_u32_array(node, "csg", pllcsg[i], + PLLCSG_NB); + if (!ret) { + pllcsg_set[i] = true; + } else if (ret != -FDT_ERR_NOTFOUND) { + debug("invalid csg node for pll@%d res=%d\n", + i, ret); + return ret; + } + } else if (i == _PLL1) { + /* use OPP for PLL1 for A7 CPU */ + debug("DT for PLL %d with OPP\n", i); + ret = stm32mp1_pll1_opp(priv, + clksrc[CLKSRC_PLL12], + pllcfg[i], + &pllfracv[i]); + if (ret) { + debug("PLL %d with OPP error = %d\n", i, ret); + return ret; + } + pllcfg_valid[i] = true; } } @@ -1778,29 +2021,18 @@ static int stm32mp1_clktree(struct udevice *dev) /* configure and start PLLs */ debug("configure PLLs\n"); for (i = 0; i < _PLL_NB; i++) { - u32 fracv; - u32 csg[PLLCSG_NB]; - - debug("configure PLL %d @ %d\n", i, - ofnode_to_offset(plloff[i])); - if (!ofnode_valid(plloff[i])) + if (!pllcfg_valid[i]) continue; - - fracv = ofnode_read_u32_default(plloff[i], "frac", 0); - pll_config(priv, i, pllcfg[i], fracv); - ret = ofnode_read_u32_array(plloff[i], "csg", csg, PLLCSG_NB); - if (!ret) { - pll_csg(priv, i, csg); - } else if (ret != -FDT_ERR_NOTFOUND) { - debug("invalid csg node for pll@%d res=%d\n", i, ret); - return ret; - } + debug("configure PLL %d\n", i); + pll_config(priv, i, pllcfg[i], pllfracv[i]); + if (pllcsg_set[i]) + pll_csg(priv, i, pllcsg[i]); pll_start(priv, i); } /* wait and start PLLs ouptut when ready */ for (i = 0; i < _PLL_NB; i++) { - if (!ofnode_valid(plloff[i])) + if (!pllcfg_valid[i]) continue; debug("output PLL %d\n", i); pll_output(priv, i, pllcfg[i][PLLCFG_O]); @@ -2050,6 +2282,8 @@ static int stm32mp1_clk_probe(struct udevice *dev) /* clock tree init is done only one time, before relocation */ if (!(gd->flags & GD_FLG_RELOC)) result = stm32mp1_clktree(dev); + if (result) + printf("clock tree initialization failed (%d)\n", result); #endif #ifndef CONFIG_SPL_BUILD