From: Hans de Goede Date: Sat, 15 Nov 2014 18:46:39 +0000 (+0100) Subject: sun6i: Make dram clk and zq value Kconfig options X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=37781a1a7e04a21feaa75ffac0723ec8f99dce19;p=u-boot.git sun6i: Make dram clk and zq value Kconfig options It turns out that there is a too large spread between boards to handle this with a default value, turn this into Kconfig options, and set the values the factory images are using for the Colombus and Mele_M9 boards. Note this changes the ZQ default when not overriden through defconfig from 120 to 123, as that is what most boards seem to actually use. Signed-off-by: Hans de Goede Acked-by: Ian Campbell --- diff --git a/arch/arm/cpu/armv7/sunxi/dram_sun6i.c b/arch/arm/cpu/armv7/sunxi/dram_sun6i.c index 699173cf69..8f567c6452 100644 --- a/arch/arm/cpu/armv7/sunxi/dram_sun6i.c +++ b/arch/arm/cpu/armv7/sunxi/dram_sun6i.c @@ -17,9 +17,7 @@ #include #include -/* DRAM clk & zq defaults, maybe turn these into Kconfig options ? */ -#define DRAM_CLK_DEFAULT 312000000 -#define DRAM_ZQ_DEFAULT 0x78 +#define DRAM_CLK (CONFIG_DRAM_CLK * 1000000) struct dram_sun6i_para { u8 bus_width; @@ -48,7 +46,7 @@ static void mctl_sys_init(void) (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; const int dram_clk_div = 2; - clock_set_pll5(DRAM_CLK_DEFAULT * dram_clk_div); + clock_set_pll5(DRAM_CLK * dram_clk_div); clrsetbits_le32(&ccm->dram_clk_cfg, CCM_DRAMCLK_CFG_DIV0_MASK, CCM_DRAMCLK_CFG_DIV0(dram_clk_div) | CCM_DRAMCLK_CFG_RST | @@ -170,7 +168,7 @@ static void mctl_channel_init(int ch_index, struct dram_sun6i_para *para) await_completion(&mctl_phy->pgsr, 0x03, 0x03); - writel(DRAM_ZQ_DEFAULT, &mctl_phy->zq0cr1); + writel(CONFIG_DRAM_ZQ, &mctl_phy->zq0cr1); setbits_le32(&mctl_phy->pir, MCTL_PIR_CLEAR_STATUS); writel(MCTL_PIR_STEP1, &mctl_phy->pir); @@ -216,9 +214,9 @@ static void mctl_channel_init(int ch_index, struct dram_sun6i_para *para) await_completion(&mctl_ctl->sstat, 0x07, 0x01); /* Set number of clks per micro-second */ - writel(DRAM_CLK_DEFAULT / 1000000, &mctl_ctl->togcnt1u); + writel(DRAM_CLK / 1000000, &mctl_ctl->togcnt1u); /* Set number of clks per 100 nano-seconds */ - writel(DRAM_CLK_DEFAULT / 10000000, &mctl_ctl->togcnt100n); + writel(DRAM_CLK / 10000000, &mctl_ctl->togcnt100n); /* Set memory timing registers */ writel(MCTL_TREFI, &mctl_ctl->trefi); writel(MCTL_TMRD, &mctl_ctl->tmrd); diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig index 5ae491d738..f7da7042f4 100644 --- a/board/sunxi/Kconfig +++ b/board/sunxi/Kconfig @@ -32,6 +32,23 @@ config MACH_SUN8I endchoice +if MACH_SUN6I + +config DRAM_CLK + int "sun6i dram clock speed" + default 312 + ---help--- + Set the dram clock speed, valid range 240 - 480, must be a multiple + of 24. + +config DRAM_ZQ + int "sun6i dram zq value" + default 123 + ---help--- + Set the dram zq value. + +endif + config SYS_CONFIG_NAME default "sun4i" if MACH_SUN4I default "sun5i" if MACH_SUN5I diff --git a/configs/Colombus_defconfig b/configs/Colombus_defconfig index de78a01801..9b4968fbd3 100644 --- a/configs/Colombus_defconfig +++ b/configs/Colombus_defconfig @@ -5,3 +5,5 @@ CONFIG_USB_KEYBOARD=n +S:CONFIG_ARCH_SUNXI=y +S:CONFIG_MACH_SUN6I=y +S:CONFIG_TARGET_COLOMBUS=y ++S:CONFIG_DRAM_CLK=288 ++S:CONFIG_DRAM_ZQ=379 diff --git a/configs/Mele_M9_defconfig b/configs/Mele_M9_defconfig index ac3cd36be8..a598254b2d 100644 --- a/configs/Mele_M9_defconfig +++ b/configs/Mele_M9_defconfig @@ -5,6 +5,8 @@ CONFIG_FDTFILE="sun6i-a31-m9.dtb" +S:CONFIG_ARCH_SUNXI=y +S:CONFIG_MACH_SUN6I=y +S:CONFIG_TARGET_MELE_M9=y ++S:CONFIG_DRAM_CLK=312 ++S:CONFIG_DRAM_ZQ=120 # Ethernet phy power +S:CONFIG_AXP221_DLDO1_VOLT=3300 # USB hub power