From: Simon Glass Date: Mon, 30 Sep 2024 01:49:48 +0000 (-0600) Subject: drivers: Use CONFIG_XPL_BUILD instead of CONFIG_SPL_BUILD X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=371dc068bbf50c6ed6146c04ec83b644bcc79249;p=u-boot.git drivers: Use CONFIG_XPL_BUILD instead of CONFIG_SPL_BUILD Use the new symbol to refer to any 'SPL' build, including TPL and VPL Signed-off-by: Simon Glass --- diff --git a/drivers/Makefile b/drivers/Makefile index 1acd94f3c1..1b7db81282 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -47,7 +47,7 @@ obj-y += bus/ ifndef CONFIG_TPL_BUILD ifndef CONFIG_VPL_BUILD -ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-$(CONFIG_SPL_CPU) += cpu/ obj-$(CONFIG_SPL_CRYPTO) += crypto/ @@ -80,7 +80,7 @@ obj-$(CONFIG_TPL_MPC8XXX_INIT_DDR) += ddr/fsl/ endif -ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),) +ifeq ($(CONFIG_XPL_BUILD)$(CONFIG_TPL_BUILD),) obj-y += ata/ obj-$(CONFIG_DM_DEMO) += demo/ diff --git a/drivers/block/Makefile b/drivers/block/Makefile index fe6a1fcf48..a551591fc9 100644 --- a/drivers/block/Makefile +++ b/drivers/block/Makefile @@ -9,7 +9,7 @@ ifndef CONFIG_$(SPL_)BLK obj-$(CONFIG_SPL_LEGACY_BLOCK) += blk_legacy.o endif -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-$(CONFIG_IDE) += ide.o obj-$(CONFIG_RKMTD) += rkmtd.o endif diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile index 0802b9666b..e14cb7fd9c 100644 --- a/drivers/bus/Makefile +++ b/drivers/bus/Makefile @@ -3,7 +3,7 @@ # Makefile for the bus drivers. # -ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),) +ifeq ($(CONFIG_XPL_BUILD)$(CONFIG_TPL_BUILD),) obj-$(CONFIG_TI_PWMSS) += ti-pwmss.o obj-$(CONFIG_UNIPHIER_SYSTEM_BUS) += uniphier-system-bus.o endif diff --git a/drivers/clk/altera/clk-agilex.c b/drivers/clk/altera/clk-agilex.c index bdc7be0fb5..e1ddd02f35 100644 --- a/drivers/clk/altera/clk-agilex.c +++ b/drivers/clk/altera/clk-agilex.c @@ -242,7 +242,7 @@ static void clk_basic_init(struct udevice *dev, if (!cfg) return; -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* Always force clock manager into boot mode before any configuration */ clk_write_ctrl(plat, CM_REG_READL(plat, CLKMGR_CTRL) | CLKMGR_CTRL_BOOTMODE); diff --git a/drivers/clk/altera/clk-agilex5.c b/drivers/clk/altera/clk-agilex5.c index 72b923465d..716c71598b 100644 --- a/drivers/clk/altera/clk-agilex5.c +++ b/drivers/clk/altera/clk-agilex5.c @@ -263,7 +263,7 @@ static void clk_basic_init(struct udevice *dev, clk_write_ctrl(plat, CM_REG_READL(plat, CLKMGR_CTRL) & ~CLKMGR_CTRL_BOOTMODE); } else { -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* Always force clock manager into boot mode before any configuration */ clk_write_ctrl(plat, CM_REG_READL(plat, CLKMGR_CTRL) | CLKMGR_CTRL_BOOTMODE); diff --git a/drivers/clk/altera/clk-n5x.c b/drivers/clk/altera/clk-n5x.c index 3e256101a9..09db250ab6 100644 --- a/drivers/clk/altera/clk-n5x.c +++ b/drivers/clk/altera/clk-n5x.c @@ -52,7 +52,7 @@ static void clk_basic_init(struct udevice *dev, if (!cfg) return; -#if IS_ENABLED(CONFIG_SPL_BUILD) +#if IS_ENABLED(CONFIG_XPL_BUILD) /* Always force clock manager into boot mode before any configuration */ clk_write_ctrl(plat, CM_REG_READL(plat, CLKMGR_CTRL) | CLKMGR_CTRL_BOOTMODE); diff --git a/drivers/clk/clk-uclass.c b/drivers/clk/clk-uclass.c index 16169dac23..a9937c22dc 100644 --- a/drivers/clk/clk-uclass.c +++ b/drivers/clk/clk-uclass.c @@ -378,7 +378,7 @@ int clk_set_defaults(struct udevice *dev, enum clk_defaults_stage stage) * However, still set them for SPL. And still set them if explicitly * asked. */ - if (!(IS_ENABLED(CONFIG_SPL_BUILD) || (gd->flags & GD_FLG_RELOC))) + if (!(IS_ENABLED(CONFIG_XPL_BUILD) || (gd->flags & GD_FLG_RELOC))) if (stage != CLK_DEFAULTS_POST_FORCE) return 0; diff --git a/drivers/clk/clk_vexpress_osc.c b/drivers/clk/clk_vexpress_osc.c index 2e0e7bbe68..85ac92c908 100644 --- a/drivers/clk/clk_vexpress_osc.c +++ b/drivers/clk/clk_vexpress_osc.c @@ -37,7 +37,7 @@ static ulong vexpress_osc_clk_get_rate(struct clk *clk) return data; } -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static ulong vexpress_osc_clk_set_rate(struct clk *clk, ulong rate) { int err; @@ -64,7 +64,7 @@ static ulong vexpress_osc_clk_set_rate(struct clk *clk, ulong rate) static struct clk_ops vexpress_osc_clk_ops = { .get_rate = vexpress_osc_clk_get_rate, -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD .set_rate = vexpress_osc_clk_set_rate, #endif }; diff --git a/drivers/clk/clk_zynq.c b/drivers/clk/clk_zynq.c index b62b4646f4..a8505f62bb 100644 --- a/drivers/clk/clk_zynq.c +++ b/drivers/clk/clk_zynq.c @@ -43,13 +43,13 @@ DECLARE_GLOBAL_DATA_PTR; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD enum zynq_clk_rclk {mio_clk, emio_clk}; #endif struct zynq_clk_priv { ulong ps_clk_freq; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD struct clk gem_emio_clk[2]; #endif }; @@ -75,7 +75,7 @@ static void *zynq_clk_get_register(enum zynq_clk id) return &slcr_base->uart_clk_ctrl; case spi0_clk ... spi1_clk: return &slcr_base->spi_clk_ctrl; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD case dci_clk: return &slcr_base->dci_clk_ctrl; case gem0_clk: @@ -150,7 +150,7 @@ static ulong zynq_clk_get_pll_rate(struct zynq_clk_priv *priv, enum zynq_clk id) return priv->ps_clk_freq * mul; } -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static enum zynq_clk_rclk zynq_clk_get_gem_rclk(enum zynq_clk id) { u32 clk_ctrl, srcsel; @@ -199,7 +199,7 @@ static ulong zynq_clk_get_cpu_rate(struct zynq_clk_priv *priv, enum zynq_clk id) return DIV_ROUND_CLOSEST(zynq_clk_get_pll_rate(priv, pll), div); } -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static ulong zynq_clk_get_ddr2x_rate(struct zynq_clk_priv *priv) { u32 clk_ctrl, div; @@ -223,7 +223,7 @@ static ulong zynq_clk_get_ddr3x_rate(struct zynq_clk_priv *priv) return DIV_ROUND_CLOSEST(zynq_clk_get_pll_rate(priv, ddrpll_clk), div); } -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static ulong zynq_clk_get_dci_rate(struct zynq_clk_priv *priv) { u32 clk_ctrl, div0, div1; @@ -251,7 +251,7 @@ static ulong zynq_clk_get_peripheral_rate(struct zynq_clk_priv *priv, if (!div0) div0 = 1; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD if (two_divs) { div1 = (clk_ctrl & CLK_CTRL_DIV1_MASK) >> CLK_CTRL_DIV1_SHIFT; if (!div1) @@ -268,7 +268,7 @@ static ulong zynq_clk_get_peripheral_rate(struct zynq_clk_priv *priv, div1); } -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static ulong zynq_clk_get_gem_rate(struct zynq_clk_priv *priv, enum zynq_clk id) { struct clk *parent; @@ -366,7 +366,7 @@ static ulong zynq_clk_set_gem_rate(struct zynq_clk_priv *priv, enum zynq_clk id, } #endif -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static ulong zynq_clk_get_rate(struct clk *clk) { struct zynq_clk_priv *priv = dev_get_priv(clk->dev); @@ -502,7 +502,7 @@ static void zynq_clk_dump(struct udevice *dev) static struct clk_ops zynq_clk_ops = { .get_rate = zynq_clk_get_rate, -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD .set_rate = zynq_clk_set_rate, #endif .enable = dummy_enable, @@ -514,7 +514,7 @@ static struct clk_ops zynq_clk_ops = { static int zynq_clk_probe(struct udevice *dev) { struct zynq_clk_priv *priv = dev_get_priv(dev); -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD unsigned int i; char name[16]; int ret; diff --git a/drivers/clk/imx/clk-imx8mm.c b/drivers/clk/imx/clk-imx8mm.c index a91c6767fa..bb6958f0ec 100644 --- a/drivers/clk/imx/clk-imx8mm.c +++ b/drivers/clk/imx/clk-imx8mm.c @@ -31,7 +31,7 @@ static const char * const imx8mm_ahb_sels[] = {"clock-osc-24m", "sys_pll1_133m", "sys_pll1_400m", "sys_pll2_125m", "sys_pll3_out", "audio_pll1_out", "video_pll1_out", }; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static const char * const imx8mm_enet_axi_sels[] = {"clock-osc-24m", "sys_pll1_266m", "sys_pll1_800m", "sys_pll2_250m", "sys_pll2_200m", "audio_pll1_out", "video_pll1_out", "sys_pll3_out", }; @@ -95,7 +95,7 @@ static const char * const imx8mm_pcie1_aux_sels[] = {"clock-osc-24m", "sys_pll2_ "sys_pll1_160m", "sys_pll1_200m", }; #endif -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static const char * const imx8mm_pwm1_sels[] = {"clock-osc-24m", "sys_pll2_100m", "sys_pll1_160m", "sys_pll1_40m", "sys_pll3_out", "clk_ext1", "sys_pll1_80m", "video_pll1_out", }; @@ -357,7 +357,7 @@ static int imx8mm_clk_probe(struct udevice *dev) imx_clk_gate4("usb1_ctrl_root_clk", "usb_bus", base + 0x44d0, 0)); /* clks not needed in SPL stage */ -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD clk_dm(IMX8MM_CLK_ENET_AXI, imx8m_clk_composite("enet_axi", imx8mm_enet_axi_sels, base + 0x8880)); diff --git a/drivers/clk/imx/clk-imx8mn.c b/drivers/clk/imx/clk-imx8mn.c index 125215e84f..be15ebd0e2 100644 --- a/drivers/clk/imx/clk-imx8mn.c +++ b/drivers/clk/imx/clk-imx8mn.c @@ -37,7 +37,7 @@ static const char * const imx8mn_enet_axi_sels[] = {"clock-osc-24m", "sys_pll1_2 "sys_pll2_250m", "sys_pll2_200m", "audio_pll1_out", "video_pll_out", "sys_pll3_out", }; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static const char * const imx8mn_enet_ref_sels[] = {"clock-osc-24m", "sys_pll2_125m", "sys_pll2_50m", "sys_pll2_100m", "sys_pll1_160m", "audio_pll1_out", "video_pll_out", "clk_ext4", }; @@ -97,7 +97,7 @@ static const char * const imx8mn_i2c4_sels[] = {"clock-osc-24m", "sys_pll1_160m" "sys_pll3_out", "audio_pll1_out", "video_pll_out", "audio_pll2_out", "sys_pll1_133m", }; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static const char * const imx8mn_pwm1_sels[] = {"clock-osc-24m", "sys_pll2_100m", "sys_pll1_160m", "sys_pll1_40m", "sys_pll3_out", "clk_ext1", "sys_pll1_80m", "video_pll_out", }; @@ -359,7 +359,7 @@ static int imx8mn_clk_probe(struct udevice *dev) imx_clk_gate4("usb1_ctrl_root_clk", "usb_bus", base + 0x44d0, 0)); /* clks not needed in SPL stage */ -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD clk_dm(IMX8MN_CLK_ENET_REF, imx8m_clk_composite("enet_ref", imx8mn_enet_ref_sels, base + 0xa980)); diff --git a/drivers/clk/imx/clk-imxrt1020.c b/drivers/clk/imx/clk-imxrt1020.c index c80b02975a..752434cb0a 100644 --- a/drivers/clk/imx/clk-imxrt1020.c +++ b/drivers/clk/imx/clk-imxrt1020.c @@ -124,7 +124,7 @@ static int imxrt1020_clk_probe(struct udevice *dev) clk_dm(IMXRT1020_CLK_SEMC, imx_clk_gate2("semc", "semc_podf", base + 0x74, 4)); -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD struct clk *clk, *clk1; clk_get_by_id(IMXRT1020_CLK_SEMC_SEL, &clk1); diff --git a/drivers/clk/imx/clk-imxrt1050.c b/drivers/clk/imx/clk-imxrt1050.c index 754f394842..788e0650a9 100644 --- a/drivers/clk/imx/clk-imxrt1050.c +++ b/drivers/clk/imx/clk-imxrt1050.c @@ -180,7 +180,7 @@ static int imxrt1050_clk_probe(struct udevice *dev) struct clk *clk, *clk1; -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* bypass pll1 before setting its rate */ clk_get_by_id(IMXRT1050_CLK_PLL1_REF_SEL, &clk); clk_get_by_id(IMXRT1050_CLK_PLL1_BYPASS, &clk1); diff --git a/drivers/clk/rockchip/clk_px30.c b/drivers/clk/rockchip/clk_px30.c index d7825c6649..22ede1c38a 100644 --- a/drivers/clk/rockchip/clk_px30.c +++ b/drivers/clk/rockchip/clk_px30.c @@ -989,7 +989,7 @@ static ulong px30_peri_set_clk(struct px30_clk_priv *priv, ulong clk_id, return px30_peri_get_clk(priv, clk_id); } -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static ulong px30_crypto_get_clk(struct px30_clk_priv *priv, ulong clk_id) { struct px30_cru *cru = priv->cru; @@ -1261,7 +1261,7 @@ static ulong px30_clk_get_rate(struct clk *clk) case HCLK_PERI_PRE: rate = px30_peri_get_clk(priv, clk->id); break; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD case SCLK_CRYPTO: case SCLK_CRYPTO_APK: rate = px30_crypto_get_clk(priv, clk->id); @@ -1345,7 +1345,7 @@ static ulong px30_clk_set_rate(struct clk *clk, ulong rate) case HCLK_PERI_PRE: ret = px30_peri_set_clk(priv, clk->id, rate); break; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD case SCLK_CRYPTO: case SCLK_CRYPTO_APK: ret = px30_crypto_set_clk(priv, clk->id, rate); diff --git a/drivers/clk/rockchip/clk_rk3188.c b/drivers/clk/rockchip/clk_rk3188.c index f569a100f2..d8b03e1d7a 100644 --- a/drivers/clk/rockchip/clk_rk3188.c +++ b/drivers/clk/rockchip/clk_rk3188.c @@ -80,7 +80,7 @@ enum { "divisors on line " __stringify(__LINE__)); /* Keep divisors as low as possible to reduce jitter and power usage */ -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD static const struct pll_div gpll_init_cfg = PLL_DIVISORS(GPLL_HZ, 2, 2); static const struct pll_div cpll_init_cfg = PLL_DIVISORS(CPLL_HZ, 1, 2); #endif @@ -371,7 +371,7 @@ static ulong rockchip_spi_set_clk(struct rk3188_cru *cru, uint gclk_rate, return rockchip_spi_get_clk(cru, gclk_rate, periph); } -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD static void rkclk_init(struct rk3188_cru *cru, struct rk3188_grf *grf, bool has_bwadj) { @@ -557,7 +557,7 @@ static int rk3188_clk_probe(struct udevice *dev) return PTR_ERR(priv->grf); priv->has_bwadj = (type == RK3188A_CRU) ? 1 : 0; -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #if CONFIG_IS_ENABLED(OF_PLATDATA) struct rk3188_clk_plat *plat = dev_get_plat(dev); diff --git a/drivers/clk/rockchip/clk_rk3288.c b/drivers/clk/rockchip/clk_rk3288.c index 432a79291c..43c44fadbe 100644 --- a/drivers/clk/rockchip/clk_rk3288.c +++ b/drivers/clk/rockchip/clk_rk3288.c @@ -223,7 +223,7 @@ static int rkclk_configure_ddr(struct rockchip_cru *cru, struct rk3288_grf *grf, return 0; } -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD #define VCO_MAX_KHZ 2200000 #define VCO_MIN_KHZ 440000 #define FREF_MAX_KHZ 2200000 @@ -421,7 +421,7 @@ static ulong rockchip_i2s_set_clk(struct rockchip_cru *cru, uint gclk_rate, return rockchip_i2s_get_clk(cru, gclk_rate); } -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */ static void rkclk_init(struct rockchip_cru *cru, struct rk3288_grf *grf) { @@ -819,7 +819,7 @@ static ulong rk3288_clk_set_rate(struct clk *clk, ulong rate) case SCLK_SPI2: new_rate = rockchip_spi_set_clk(cru, gclk_rate, clk->id, rate); break; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD case SCLK_I2S0: new_rate = rockchip_i2s_set_clk(cru, gclk_rate, rate); break; @@ -973,7 +973,7 @@ static int rk3288_clk_probe(struct udevice *dev) priv->grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF); if (IS_ERR(priv->grf)) return PTR_ERR(priv->grf); -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #if CONFIG_IS_ENABLED(OF_PLATDATA) struct rk3288_clk_plat *plat = dev_get_plat(dev); diff --git a/drivers/clk/rockchip/clk_rk3328.c b/drivers/clk/rockchip/clk_rk3328.c index 9137dbe69c..7701a9734e 100644 --- a/drivers/clk/rockchip/clk_rk3328.c +++ b/drivers/clk/rockchip/clk_rk3328.c @@ -582,7 +582,7 @@ static ulong rk3328_spi_set_clk(struct rk3328_cru *cru, uint hz) return rk3328_spi_get_clk(cru); } -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static ulong rk3328_vop_get_clk(struct rk3328_clk_priv *priv, ulong clk_id) { struct rk3328_cru *cru = priv->cru; @@ -746,7 +746,7 @@ static ulong rk3328_clk_set_rate(struct clk *clk, ulong rate) case SCLK_SPI: ret = rk3328_spi_set_clk(priv->cru, rate); break; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD case DCLK_LCDC: case ACLK_VOP_PRE: case ACLK_VIO_PRE: diff --git a/drivers/clk/rockchip/clk_rk3368.c b/drivers/clk/rockchip/clk_rk3368.c index d894398052..630253fbb1 100644 --- a/drivers/clk/rockchip/clk_rk3368.c +++ b/drivers/clk/rockchip/clk_rk3368.c @@ -50,7 +50,7 @@ struct pll_div { (_nr * _no) == hz, #hz "Hz cannot be hit with PLL " \ "divisors on line " __stringify(__LINE__)); -#if IS_ENABLED(CONFIG_SPL_BUILD) || IS_ENABLED(CONFIG_TPL_BUILD) +#if IS_ENABLED(CONFIG_XPL_BUILD) || IS_ENABLED(CONFIG_TPL_BUILD) static const struct pll_div apll_l_init_cfg = PLL_DIVISORS(APLL_L_HZ, 12, 2); static const struct pll_div apll_b_init_cfg = PLL_DIVISORS(APLL_B_HZ, 1, 2); #if !defined(CONFIG_TPL_BUILD) @@ -88,7 +88,7 @@ static uint32_t rkclk_pll_get_rate(struct rk3368_cru *cru, } } -#if IS_ENABLED(CONFIG_SPL_BUILD) || IS_ENABLED(CONFIG_TPL_BUILD) +#if IS_ENABLED(CONFIG_XPL_BUILD) || IS_ENABLED(CONFIG_TPL_BUILD) static int rkclk_set_pll(struct rk3368_cru *cru, enum rk3368_pll_id pll_id, const struct pll_div *div) { @@ -130,7 +130,7 @@ static int rkclk_set_pll(struct rk3368_cru *cru, enum rk3368_pll_id pll_id, } #endif -#if IS_ENABLED(CONFIG_SPL_BUILD) || IS_ENABLED(CONFIG_TPL_BUILD) +#if IS_ENABLED(CONFIG_XPL_BUILD) || IS_ENABLED(CONFIG_TPL_BUILD) static void rkclk_init(struct rk3368_cru *cru) { u32 apllb, aplll, dpll, cpll, gpll; @@ -157,7 +157,7 @@ static void rkclk_init(struct rk3368_cru *cru) } #endif -#if !IS_ENABLED(CONFIG_SPL_BUILD) || CONFIG_IS_ENABLED(MMC) +#if !IS_ENABLED(CONFIG_XPL_BUILD) || CONFIG_IS_ENABLED(MMC) static ulong rk3368_mmc_get_clk(struct rk3368_cru *cru, uint clk_id) { u32 div, con, con_id, rate; @@ -469,7 +469,7 @@ static ulong rk3368_clk_get_rate(struct clk *clk) case SCLK_SPI0 ... SCLK_SPI2: rate = rk3368_spi_get_clk(priv->cru, clk->id); break; -#if !IS_ENABLED(CONFIG_SPL_BUILD) || CONFIG_IS_ENABLED(MMC) +#if !IS_ENABLED(CONFIG_XPL_BUILD) || CONFIG_IS_ENABLED(MMC) case HCLK_SDMMC: case HCLK_EMMC: rate = rk3368_mmc_get_clk(priv->cru, clk->id); @@ -500,7 +500,7 @@ static ulong rk3368_clk_set_rate(struct clk *clk, ulong rate) ret = rk3368_ddr_set_clk(priv->cru, rate); break; #endif -#if !IS_ENABLED(CONFIG_SPL_BUILD) || CONFIG_IS_ENABLED(MMC) +#if !IS_ENABLED(CONFIG_XPL_BUILD) || CONFIG_IS_ENABLED(MMC) case HCLK_SDMMC: case HCLK_EMMC: ret = rk3368_mmc_set_clk(clk, rate); @@ -586,7 +586,7 @@ static int rk3368_clk_probe(struct udevice *dev) priv->cru = map_sysmem(plat->dtd.reg[0], plat->dtd.reg[1]); #endif -#if IS_ENABLED(CONFIG_SPL_BUILD) || IS_ENABLED(CONFIG_TPL_BUILD) +#if IS_ENABLED(CONFIG_XPL_BUILD) || IS_ENABLED(CONFIG_TPL_BUILD) rkclk_init(priv->cru); #endif diff --git a/drivers/clk/rockchip/clk_rk3399.c b/drivers/clk/rockchip/clk_rk3399.c index 8992404129..155ea8d635 100644 --- a/drivers/clk/rockchip/clk_rk3399.c +++ b/drivers/clk/rockchip/clk_rk3399.c @@ -56,7 +56,7 @@ struct pll_div { static const struct pll_div gpll_init_cfg = PLL_DIVISORS(GPLL_HZ, 2, 2, 1); static const struct pll_div cpll_init_cfg = PLL_DIVISORS(CPLL_HZ, 1, 2, 2); -#if !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_XPL_BUILD) static const struct pll_div ppll_init_cfg = PLL_DIVISORS(PPLL_HZ, 2, 2, 1); #endif @@ -1464,7 +1464,7 @@ static int rk3399_clk_probe(struct udevice *dev) priv->cru = map_sysmem(plat->dtd.reg[0], plat->dtd.reg[1]); #endif -#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD) init_clocks = true; #elif CONFIG_IS_ENABLED(HANDOFF) if (!(gd->flags & GD_FLG_RELOC)) { @@ -1658,7 +1658,7 @@ static struct clk_ops rk3399_pmuclk_ops = { .set_rate = rk3399_pmuclk_set_rate, }; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static void pmuclk_init(struct rk3399_pmucru *pmucru) { u32 pclk_div; @@ -1676,7 +1676,7 @@ static void pmuclk_init(struct rk3399_pmucru *pmucru) static int rk3399_pmuclk_probe(struct udevice *dev) { -#if CONFIG_IS_ENABLED(OF_PLATDATA) || !defined(CONFIG_SPL_BUILD) +#if CONFIG_IS_ENABLED(OF_PLATDATA) || !defined(CONFIG_XPL_BUILD) struct rk3399_pmuclk_priv *priv = dev_get_priv(dev); #endif @@ -1686,7 +1686,7 @@ static int rk3399_pmuclk_probe(struct udevice *dev) priv->pmucru = map_sysmem(plat->dtd.reg[0], plat->dtd.reg[1]); #endif -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD pmuclk_init(priv->pmucru); #endif return 0; diff --git a/drivers/clk/rockchip/clk_rk3568.c b/drivers/clk/rockchip/clk_rk3568.c index 35563509d6..977699d509 100644 --- a/drivers/clk/rockchip/clk_rk3568.c +++ b/drivers/clk/rockchip/clk_rk3568.c @@ -91,7 +91,7 @@ static struct rockchip_pll_clock rk3568_pll_clks[] = { RK3568_PMU_MODE, 2, 10, 0, rk3568_pll_rates), }; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static ulong rk3568_pmu_pll_set_rate(struct rk3568_clk_priv *priv, ulong pll_id, ulong rate) @@ -1707,7 +1707,7 @@ static ulong rk3568_emmc_set_bclk(struct rk3568_clk_priv *priv, ulong rate) return rk3568_emmc_get_bclk(priv); } -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static ulong rk3568_aclk_vop_get_clk(struct rk3568_clk_priv *priv) { struct rk3568_cru *cru = priv->cru; @@ -2413,7 +2413,7 @@ static ulong rk3568_clk_get_rate(struct clk *clk) case TCLK_EMMC: rate = OSC_HZ; break; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD case ACLK_VOP: rate = rk3568_aclk_vop_get_clk(priv); break; @@ -2594,7 +2594,7 @@ static ulong rk3568_clk_set_rate(struct clk *clk, ulong rate) case TCLK_EMMC: ret = OSC_HZ; break; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD case ACLK_VOP: ret = rk3568_aclk_vop_set_clk(priv, rate); break; @@ -2894,7 +2894,7 @@ static void rk3568_clk_init(struct rk3568_clk_priv *priv) priv->gpll_hz = GPLL_HZ; } -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD ret = rk3568_bus_set_clk(priv, ACLK_BUS, 150000000); if (ret < 0) printf("Fail to set the ACLK_BUS clock.\n"); diff --git a/drivers/clk/rockchip/clk_rk3588.c b/drivers/clk/rockchip/clk_rk3588.c index db1384dacd..6042fc10cd 100644 --- a/drivers/clk/rockchip/clk_rk3588.c +++ b/drivers/clk/rockchip/clk_rk3588.c @@ -65,7 +65,7 @@ static struct rockchip_pll_clock rk3588_pll_clks[] = { RK3588_MODE_CON0, 0, 15, 0, rk3588_pll_rates), [PPLL] = PLL(pll_rk3588, PLL_PPLL, RK3588_PMU_PLL_CON(128), RK3588_MODE_CON0, 10, 15, 0, rk3588_pll_rates), -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* * The SPLL is part of the SBUSCRU, not the main CRU and as * such only directly accessible during the SPL stage. @@ -76,7 +76,7 @@ static struct rockchip_pll_clock rk3588_pll_clks[] = { }; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD /* * * rational_best_approximation(31415, 10000, @@ -875,7 +875,7 @@ static ulong rk3588_mmc_set_clk(struct rk3588_clk_priv *priv, return rk3588_mmc_get_clk(priv, clk_id); } -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static ulong rk3588_aux16m_get_clk(struct rk3588_clk_priv *priv, ulong clk_id) { struct rk3588_cru *cru = priv->cru; @@ -1600,7 +1600,7 @@ static ulong rk3588_clk_get_rate(struct clk *clk) case CLK_GPU: rate = 200000000; break; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD case CLK_AUX16M_0: case CLK_AUX16M_1: rate = rk3588_aux16m_get_clk(priv, clk->id); @@ -1760,7 +1760,7 @@ static ulong rk3588_clk_set_rate(struct clk *clk, ulong rate) case CLK_150M_SRC: ret = 0; break; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD case CLK_AUX16M_0: case CLK_AUX16M_1: ret = rk3588_aux16m_set_clk(priv, clk->id, rate); @@ -1965,7 +1965,7 @@ static int rk3588_clk_probe(struct udevice *dev) priv->sync_kernel = false; -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD rockchip_pll_set_rate(&rk3588_pll_clks[B0PLL], priv->cru, B0PLL, LPLL_HZ); rockchip_pll_set_rate(&rk3588_pll_clks[B1PLL], priv->cru, @@ -2051,7 +2051,7 @@ U_BOOT_DRIVER(rockchip_rk3588_cru) = { .probe = rk3588_clk_probe, }; -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #define SCRU_BASE 0xfd7d0000 #define SBUSCRU_BASE 0xfd7d8000 diff --git a/drivers/clk/sifive/sifive-prci.c b/drivers/clk/sifive/sifive-prci.c index aa26d3a109..de55504b5c 100644 --- a/drivers/clk/sifive/sifive-prci.c +++ b/drivers/clk/sifive/sifive-prci.c @@ -670,7 +670,7 @@ static int sifive_prci_probe(struct udevice *dev) __prci_wrpll_read_cfg0(pd, pc->pwd); } - if (IS_ENABLED(CONFIG_SPL_BUILD)) { + if (IS_ENABLED(CONFIG_XPL_BUILD)) { if (device_is_compatible(dev, "sifive,fu740-c000-prci")) { u32 prci_pll_reg; unsigned long parent_rate; diff --git a/drivers/clk/starfive/clk-jh7110-pll.c b/drivers/clk/starfive/clk-jh7110-pll.c index 581035842f..6d2bfb3ecb 100644 --- a/drivers/clk/starfive/clk-jh7110-pll.c +++ b/drivers/clk/starfive/clk-jh7110-pll.c @@ -348,10 +348,10 @@ struct clk *starfive_jh7110_pll(const char *name, const char *parent_name, return ERR_PTR(ret); } - if (IS_ENABLED(CONFIG_SPL_BUILD) && pll->type == PLL0) + if (IS_ENABLED(CONFIG_XPL_BUILD) && pll->type == PLL0) jh7110_pllx_set_rate(clk, 1000000000); - if (IS_ENABLED(CONFIG_SPL_BUILD) && pll->type == PLL2) + if (IS_ENABLED(CONFIG_XPL_BUILD) && pll->type == PLL2) jh7110_pllx_set_rate(clk, 1188000000); return clk; diff --git a/drivers/clk/stm32/clk-stm32mp1.c b/drivers/clk/stm32/clk-stm32mp1.c index 204ac17053..4044edfb76 100644 --- a/drivers/clk/stm32/clk-stm32mp1.c +++ b/drivers/clk/stm32/clk-stm32mp1.c @@ -26,7 +26,7 @@ DECLARE_GLOBAL_DATA_PTR; -#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD) /* activate clock tree initialization in the driver */ #define STM32MP1_CLOCK_TREE_INIT #endif @@ -2279,7 +2279,7 @@ static int stm32mp1_clk_probe(struct udevice *dev) dev_err(dev, "clock tree initialization failed (%d)\n", result); #endif -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD #if defined(VERBOSE_DEBUG) /* display debug information for probe after relocation */ if (gd->flags & GD_FLG_RELOC) @@ -2314,7 +2314,7 @@ static const struct clk_ops stm32mp1_clk_ops = { .disable = stm32mp1_clk_disable, .get_rate = stm32mp1_clk_get_rate, .set_rate = stm32mp1_clk_set_rate, -#if IS_ENABLED(CONFIG_CMD_CLK) && !IS_ENABLED(CONFIG_SPL_BUILD) +#if IS_ENABLED(CONFIG_CMD_CLK) && !IS_ENABLED(CONFIG_XPL_BUILD) .dump = stm32mp1_clk_dump, #endif }; diff --git a/drivers/core/ofnode.c b/drivers/core/ofnode.c index 7e3b3719d1..129b34a5cd 100644 --- a/drivers/core/ofnode.c +++ b/drivers/core/ofnode.c @@ -611,7 +611,7 @@ int ofnode_read_u32_array(ofnode node, const char *propname, out_values, sz); /* get the error right, but space is more important in SPL */ - if (!IS_ENABLED(CONFIG_SPL_BUILD)) { + if (!IS_ENABLED(CONFIG_XPL_BUILD)) { if (ret == -FDT_ERR_NOTFOUND) return -EINVAL; else if (ret == -FDT_ERR_BADLAYOUT) @@ -1468,7 +1468,7 @@ int ofnode_read_simple_size_cells(ofnode node) bool ofnode_pre_reloc(ofnode node) { -#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_TPL_BUILD) +#if defined(CONFIG_XPL_BUILD) || defined(CONFIG_TPL_BUILD) /* for SPL and TPL the remaining nodes after the fdtgrep 1st pass * had property bootph-all or bootph-pre-sram/bootph-pre-ram. * They are removed in final dtb (fdtgrep 2nd pass) diff --git a/drivers/crypto/fsl/jobdesc.c b/drivers/crypto/fsl/jobdesc.c index 5519173693..9c4ff4960f 100644 --- a/drivers/crypto/fsl/jobdesc.c +++ b/drivers/crypto/fsl/jobdesc.c @@ -207,7 +207,7 @@ void inline_cnstr_jobdesc_hash(uint32_t *desc, append_store(desc, dma_addr_out, storelen, LDST_CLASS_2_CCB | LDST_SRCDST_BYTE_CONTEXT); } -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD void inline_cnstr_jobdesc_blob_encap(uint32_t *desc, uint8_t *key_idnfr, uint8_t *plain_txt, uint8_t *enc_blob, uint32_t in_sz) diff --git a/drivers/crypto/fsl/jr.c b/drivers/crypto/fsl/jr.c index 27e2480894..c45481bef0 100644 --- a/drivers/crypto/fsl/jr.c +++ b/drivers/crypto/fsl/jr.c @@ -713,7 +713,7 @@ int sec_init_idx(uint8_t sec_idx) ccsr_sec_t *sec = caam->sec; uint32_t mcr = sec_in32(&sec->mcfgr); -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_IMX8M) +#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_IMX8M) uint32_t jrdid_ms = 0; #endif #ifdef CONFIG_FSL_CORENET @@ -745,14 +745,14 @@ int sec_init_idx(uint8_t sec_idx) mcr |= (1 << MCFGR_PS_SHIFT); #endif sec_out32(&sec->mcfgr, mcr); -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_IMX8M) +#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_IMX8M) jrdid_ms = JRDID_MS_TZ_OWN | JRDID_MS_PRIM_TZ | JRDID_MS_PRIM_DID; sec_out32(&sec->jrliodnr[caam->jrid].ms, jrdid_ms); #endif jr_reset(); #ifdef CONFIG_FSL_CORENET -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* * For SPL Build, Set the Liodns in SEC JR0 for * creating PAMU entries corresponding to these. diff --git a/drivers/ddr/altera/sdram_gen5.c b/drivers/ddr/altera/sdram_gen5.c index 46c53e7c7a..3c79bb1180 100644 --- a/drivers/ddr/altera/sdram_gen5.c +++ b/drivers/ddr/altera/sdram_gen5.c @@ -20,7 +20,7 @@ #include "sequencer.h" -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD struct altera_gen5_sdram_priv { struct ram_info info; @@ -651,4 +651,4 @@ U_BOOT_DRIVER(altera_gen5_sdram) = { .priv_auto = sizeof(struct altera_gen5_sdram_priv), }; -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */ diff --git a/drivers/ddr/fsl/lc_common_dimm_params.c b/drivers/ddr/fsl/lc_common_dimm_params.c index cc128112e4..9c5b108267 100644 --- a/drivers/ddr/fsl/lc_common_dimm_params.c +++ b/drivers/ddr/fsl/lc_common_dimm_params.c @@ -409,18 +409,18 @@ compute_lowest_common_dimm_parameters(const unsigned int ctrl_num, if (dimm_params[i].n_ranks) { if (dimm_params[i].registered_dimm) { temp1 = 1; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD printf("Detected RDIMM %s\n", dimm_params[i].mpart); #endif } else { temp2 = 1; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD printf("Detected UDIMM %s\n", dimm_params[i].mpart); #endif } -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD puts(" "); #endif } diff --git a/drivers/ddr/fsl/main.c b/drivers/ddr/fsl/main.c index 888dfb7ff3..d59e94779f 100644 --- a/drivers/ddr/fsl/main.c +++ b/drivers/ddr/fsl/main.c @@ -863,16 +863,16 @@ phys_size_t __fsl_ddr_sdram(fsl_ddr_info_t *pinfo) if ((first_ctrl == 0) && (total_memory - 1 > (phys_size_t)~0ULL)) { puts("Detected "); print_size(total_memory, " of memory\n"); -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD puts(" "); /* re-align to match init_dram print */ #endif puts("This U-Boot only supports <= "); print_size((unsigned long long)((phys_size_t)~0ULL)+1, " of DDR\n"); -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD puts(" "); /* re-align to match init_dram print */ #endif puts("You could rebuild it with CONFIG_PHYS_64BIT\n"); -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD puts(" "); /* re-align to match init_dram print */ #endif } diff --git a/drivers/ddr/imx/imx8m/Makefile b/drivers/ddr/imx/imx8m/Makefile index aed91dc23f..883e6e1b0d 100644 --- a/drivers/ddr/imx/imx8m/Makefile +++ b/drivers/ddr/imx/imx8m/Makefile @@ -4,7 +4,7 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-$(CONFIG_IMX8M_DRAM) += ddr_init.o obj-y += ../phy/ endif diff --git a/drivers/ddr/imx/imx8ulp/Makefile b/drivers/ddr/imx/imx8ulp/Makefile index 7f44a92180..4f2ad32351 100644 --- a/drivers/ddr/imx/imx8ulp/Makefile +++ b/drivers/ddr/imx/imx8ulp/Makefile @@ -4,6 +4,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-$(CONFIG_IMX8ULP_DRAM) += ddr_init.o endif diff --git a/drivers/ddr/imx/imx9/Makefile b/drivers/ddr/imx/imx9/Makefile index 9403f988b3..6c9506055b 100644 --- a/drivers/ddr/imx/imx9/Makefile +++ b/drivers/ddr/imx/imx9/Makefile @@ -4,7 +4,7 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-$(CONFIG_IMX9_DRAM) += ddr_init.o obj-y += ../phy/ endif diff --git a/drivers/ddr/imx/phy/Makefile b/drivers/ddr/imx/phy/Makefile index bb3d4ee5b7..592d0c6eba 100644 --- a/drivers/ddr/imx/phy/Makefile +++ b/drivers/ddr/imx/phy/Makefile @@ -4,6 +4,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-$(CONFIG_IMX_SNPS_DDR_PHY) += helper.o ddrphy_utils.o ddrphy_train.o ddrphy_csr.o endif diff --git a/drivers/ddr/marvell/a38x/Makefile b/drivers/ddr/marvell/a38x/Makefile index 4e8a9d190d..f49d009920 100644 --- a/drivers/ddr/marvell/a38x/Makefile +++ b/drivers/ddr/marvell/a38x/Makefile @@ -1,29 +1,29 @@ # SPDX-License-Identifier: GPL-2.0+ -obj-$(CONFIG_SPL_BUILD) += mv_ddr_plat.o -obj-$(CONFIG_SPL_BUILD) += mv_ddr_sys_env_lib.o -obj-$(CONFIG_SPL_BUILD) += ddr3_debug.o -obj-$(CONFIG_SPL_BUILD) += ddr3_init.o -obj-$(CONFIG_SPL_BUILD) += ddr3_training.o -obj-$(CONFIG_SPL_BUILD) += ddr3_training_bist.o -obj-$(CONFIG_SPL_BUILD) += ddr3_training_centralization.o -obj-$(CONFIG_SPL_BUILD) += ddr3_training_db.o -obj-$(CONFIG_SPL_BUILD) += ddr3_training_hw_algo.o -obj-$(CONFIG_SPL_BUILD) += ddr3_training_ip_engine.o -obj-$(CONFIG_SPL_BUILD) += ddr3_training_leveling.o -obj-$(CONFIG_SPL_BUILD) += ddr3_training_pbs.o -obj-$(CONFIG_SPL_BUILD) += mv_ddr_build_message.o -obj-$(CONFIG_SPL_BUILD) += mv_ddr_common.o -obj-$(CONFIG_SPL_BUILD) += mv_ddr_spd.o -obj-$(CONFIG_SPL_BUILD) += mv_ddr_topology.o -obj-$(CONFIG_SPL_BUILD) += xor.o +obj-$(CONFIG_XPL_BUILD) += mv_ddr_plat.o +obj-$(CONFIG_XPL_BUILD) += mv_ddr_sys_env_lib.o +obj-$(CONFIG_XPL_BUILD) += ddr3_debug.o +obj-$(CONFIG_XPL_BUILD) += ddr3_init.o +obj-$(CONFIG_XPL_BUILD) += ddr3_training.o +obj-$(CONFIG_XPL_BUILD) += ddr3_training_bist.o +obj-$(CONFIG_XPL_BUILD) += ddr3_training_centralization.o +obj-$(CONFIG_XPL_BUILD) += ddr3_training_db.o +obj-$(CONFIG_XPL_BUILD) += ddr3_training_hw_algo.o +obj-$(CONFIG_XPL_BUILD) += ddr3_training_ip_engine.o +obj-$(CONFIG_XPL_BUILD) += ddr3_training_leveling.o +obj-$(CONFIG_XPL_BUILD) += ddr3_training_pbs.o +obj-$(CONFIG_XPL_BUILD) += mv_ddr_build_message.o +obj-$(CONFIG_XPL_BUILD) += mv_ddr_common.o +obj-$(CONFIG_XPL_BUILD) += mv_ddr_spd.o +obj-$(CONFIG_XPL_BUILD) += mv_ddr_topology.o +obj-$(CONFIG_XPL_BUILD) += xor.o obj-$(CONFIG_ARMADA_38X_SUPPORT_OLD_DDR3_TRAINING) += old/ ifdef CONFIG_DDR4 - obj-$(CONFIG_SPL_BUILD) += mv_ddr4_mpr_pda_if.o - obj-$(CONFIG_SPL_BUILD) += mv_ddr4_training.o - obj-$(CONFIG_SPL_BUILD) += mv_ddr4_training_calibration.o - obj-$(CONFIG_SPL_BUILD) += mv_ddr4_training_db.o - obj-$(CONFIG_SPL_BUILD) += mv_ddr4_training_leveling.o + obj-$(CONFIG_XPL_BUILD) += mv_ddr4_mpr_pda_if.o + obj-$(CONFIG_XPL_BUILD) += mv_ddr4_training.o + obj-$(CONFIG_XPL_BUILD) += mv_ddr4_training_calibration.o + obj-$(CONFIG_XPL_BUILD) += mv_ddr4_training_db.o + obj-$(CONFIG_XPL_BUILD) += mv_ddr4_training_leveling.o endif diff --git a/drivers/ddr/marvell/a38x/old/Makefile b/drivers/ddr/marvell/a38x/old/Makefile index 1645a79b40..c9bc746cc2 100644 --- a/drivers/ddr/marvell/a38x/old/Makefile +++ b/drivers/ddr/marvell/a38x/old/Makefile @@ -2,20 +2,20 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-$(CONFIG_SPL_BUILD) += ddr3_a38x.o -obj-$(CONFIG_SPL_BUILD) += ddr3_a38x_training.o -obj-$(CONFIG_SPL_BUILD) += ddr3_debug.o -obj-$(CONFIG_SPL_BUILD) += ddr3_hws_hw_training.o -obj-$(CONFIG_SPL_BUILD) += ddr3_init.o -obj-$(CONFIG_SPL_BUILD) += ddr3_training.o -obj-$(CONFIG_SPL_BUILD) += ddr3_training_bist.o -obj-$(CONFIG_SPL_BUILD) += ddr3_training_centralization.o -obj-$(CONFIG_SPL_BUILD) += ddr3_training_db.o -obj-$(CONFIG_SPL_BUILD) += ddr3_training_hw_algo.o -obj-$(CONFIG_SPL_BUILD) += ddr3_training_ip_engine.o -obj-$(CONFIG_SPL_BUILD) += ddr3_training_leveling.o -obj-$(CONFIG_SPL_BUILD) += ddr3_training_pbs.o -obj-$(CONFIG_SPL_BUILD) += ddr3_training_static.o +obj-$(CONFIG_XPL_BUILD) += ddr3_a38x.o +obj-$(CONFIG_XPL_BUILD) += ddr3_a38x_training.o +obj-$(CONFIG_XPL_BUILD) += ddr3_debug.o +obj-$(CONFIG_XPL_BUILD) += ddr3_hws_hw_training.o +obj-$(CONFIG_XPL_BUILD) += ddr3_init.o +obj-$(CONFIG_XPL_BUILD) += ddr3_training.o +obj-$(CONFIG_XPL_BUILD) += ddr3_training_bist.o +obj-$(CONFIG_XPL_BUILD) += ddr3_training_centralization.o +obj-$(CONFIG_XPL_BUILD) += ddr3_training_db.o +obj-$(CONFIG_XPL_BUILD) += ddr3_training_hw_algo.o +obj-$(CONFIG_XPL_BUILD) += ddr3_training_ip_engine.o +obj-$(CONFIG_XPL_BUILD) += ddr3_training_leveling.o +obj-$(CONFIG_XPL_BUILD) += ddr3_training_pbs.o +obj-$(CONFIG_XPL_BUILD) += ddr3_training_static.o define IncludeSymbolRename CFLAGS_$(1) = -include $(srctree)/drivers/ddr/marvell/a38x/old/glue_symbol_renames.h diff --git a/drivers/ddr/marvell/axp/Makefile b/drivers/ddr/marvell/axp/Makefile index d04d9a21db..01e427296e 100644 --- a/drivers/ddr/marvell/axp/Makefile +++ b/drivers/ddr/marvell/axp/Makefile @@ -1,12 +1,12 @@ # SPDX-License-Identifier: GPL-2.0+ -obj-$(CONFIG_SPL_BUILD) += ddr3_dfs.o -obj-$(CONFIG_SPL_BUILD) += ddr3_dqs.o -obj-$(CONFIG_SPL_BUILD) += ddr3_hw_training.o -obj-$(CONFIG_SPL_BUILD) += ddr3_init.o -obj-$(CONFIG_SPL_BUILD) += ddr3_pbs.o -obj-$(CONFIG_SPL_BUILD) += ddr3_read_leveling.o -obj-$(CONFIG_SPL_BUILD) += ddr3_sdram.o -obj-$(CONFIG_SPL_BUILD) += ddr3_spd.o -obj-$(CONFIG_SPL_BUILD) += ddr3_write_leveling.o -obj-$(CONFIG_SPL_BUILD) += xor.o +obj-$(CONFIG_XPL_BUILD) += ddr3_dfs.o +obj-$(CONFIG_XPL_BUILD) += ddr3_dqs.o +obj-$(CONFIG_XPL_BUILD) += ddr3_hw_training.o +obj-$(CONFIG_XPL_BUILD) += ddr3_init.o +obj-$(CONFIG_XPL_BUILD) += ddr3_pbs.o +obj-$(CONFIG_XPL_BUILD) += ddr3_read_leveling.o +obj-$(CONFIG_XPL_BUILD) += ddr3_sdram.o +obj-$(CONFIG_XPL_BUILD) += ddr3_spd.o +obj-$(CONFIG_XPL_BUILD) += ddr3_write_leveling.o +obj-$(CONFIG_XPL_BUILD) += xor.o diff --git a/drivers/firmware/firmware-zynqmp.c b/drivers/firmware/firmware-zynqmp.c index f99507d86c..4b1b80d7ab 100644 --- a/drivers/firmware/firmware-zynqmp.c +++ b/drivers/firmware/firmware-zynqmp.c @@ -260,7 +260,7 @@ int zynqmp_pmufw_load_config_object(const void *cfg_obj, size_t size) int err; u32 ret_payload[PAYLOAD_ARG_CNT]; - if (IS_ENABLED(CONFIG_SPL_BUILD)) + if (IS_ENABLED(CONFIG_XPL_BUILD)) printf("Loading new PMUFW cfg obj (%ld bytes)\n", size); flush_dcache_range((ulong)cfg_obj, (ulong)(cfg_obj + size)); @@ -282,7 +282,7 @@ int zynqmp_pmufw_load_config_object(const void *cfg_obj, size_t size) if (ret_payload[0]) printf("PMUFW returned 0x%08x status!\n", ret_payload[0]); - if ((err || ret_payload[0]) && IS_ENABLED(CONFIG_SPL_BUILD)) + if ((err || ret_payload[0]) && IS_ENABLED(CONFIG_XPL_BUILD)) panic("PMUFW config object loading failed in EL3\n"); return 0; @@ -354,7 +354,7 @@ int __maybe_unused xilinx_pm_request(u32 api_id, u32 arg0, u32 arg1, u32 arg2, debug("%s at EL%d, API ID: 0x%0x, 0x%0x, 0x%0x, 0x%0x, 0x%0x\n", __func__, current_el(), api_id, arg0, arg1, arg2, arg3); - if (IS_ENABLED(CONFIG_SPL_BUILD) || current_el() == 3) { + if (IS_ENABLED(CONFIG_XPL_BUILD) || current_el() == 3) { #if defined(CONFIG_ZYNQMP_IPI) /* * Use fixed payload and arg size as the EL2 call. The firmware @@ -416,10 +416,10 @@ static int zynqmp_firmware_bind(struct udevice *dev) int ret; struct udevice *child; - if ((IS_ENABLED(CONFIG_SPL_BUILD) && + if ((IS_ENABLED(CONFIG_XPL_BUILD) && IS_ENABLED(CONFIG_SPL_POWER_DOMAIN) && IS_ENABLED(CONFIG_ZYNQMP_POWER_DOMAIN)) || - (!IS_ENABLED(CONFIG_SPL_BUILD) && + (!IS_ENABLED(CONFIG_XPL_BUILD) && IS_ENABLED(CONFIG_ZYNQMP_POWER_DOMAIN))) { ret = device_bind_driver_to_node(dev, "zynqmp_power_domain", "zynqmp_power_domain", diff --git a/drivers/fpga/intel_sdm_mb.c b/drivers/fpga/intel_sdm_mb.c index 45caef4f5c..5a65bd9877 100644 --- a/drivers/fpga/intel_sdm_mb.c +++ b/drivers/fpga/intel_sdm_mb.c @@ -17,7 +17,7 @@ #define RECONFIG_STATUS_POLL_RESP_TIMEOUT_MS 60000 #define RECONFIG_STATUS_INTERVAL_DELAY_US 1000000 -#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_ATF) +#if !defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_ATF) #define BITSTREAM_CHUNK_SIZE 0xFFFF0 #define RECONFIG_STATUS_POLL_RETRY_MAX 100 diff --git a/drivers/fpga/zynqpl.c b/drivers/fpga/zynqpl.c index 57467b4d97..3e86d854a0 100644 --- a/drivers/fpga/zynqpl.c +++ b/drivers/fpga/zynqpl.c @@ -414,13 +414,13 @@ static int zynq_load(xilinx_desc *desc, const void *buf, size_t bsize, if (bstype != BIT_PARTIAL) zynq_slcr_devcfg_enable(); - if (!IS_ENABLED(CONFIG_SPL_BUILD)) + if (!IS_ENABLED(CONFIG_XPL_BUILD)) puts("INFO:post config was not run, please run manually if needed\n"); return FPGA_SUCCESS; } -#if defined(CONFIG_CMD_FPGA_LOADFS) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_CMD_FPGA_LOADFS) && !defined(CONFIG_XPL_BUILD) static int zynq_loadfs(xilinx_desc *desc, const void *buf, size_t bsize, fpga_fs_info *fsinfo) { @@ -504,7 +504,7 @@ static int zynq_loadfs(xilinx_desc *desc, const void *buf, size_t bsize, struct xilinx_fpga_op zynq_op = { .load = zynq_load, -#if defined(CONFIG_CMD_FPGA_LOADFS) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_CMD_FPGA_LOADFS) && !defined(CONFIG_XPL_BUILD) .loadfs = zynq_loadfs, #endif }; diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index da0faf0524..990a670dd7 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -3,7 +3,7 @@ # Copyright 2000-2008 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-$(CONFIG_DWAPB_GPIO) += dwapb_gpio.o obj-$(CONFIG_AXP_GPIO) += axp_gpio.o obj-$(CONFIG_DM_74X164) += 74x164_gpio.o diff --git a/drivers/gpio/gpio-uclass.c b/drivers/gpio/gpio-uclass.c index 92ce68dd4a..0213271e3a 100644 --- a/drivers/gpio/gpio-uclass.c +++ b/drivers/gpio/gpio-uclass.c @@ -412,7 +412,7 @@ int dm_gpio_request(struct gpio_desc *desc, const char *label) static int dm_gpio_requestf(struct gpio_desc *desc, const char *fmt, ...) { -#if !defined(CONFIG_SPL_BUILD) || !CONFIG_IS_ENABLED(USE_TINY_PRINTF) +#if !defined(CONFIG_XPL_BUILD) || !CONFIG_IS_ENABLED(USE_TINY_PRINTF) va_list args; char buf[40]; @@ -461,7 +461,7 @@ int gpio_request(unsigned gpio, const char *label) */ int gpio_requestf(unsigned gpio, const char *fmt, ...) { -#if !defined(CONFIG_SPL_BUILD) || !CONFIG_IS_ENABLED(USE_TINY_PRINTF) +#if !defined(CONFIG_XPL_BUILD) || !CONFIG_IS_ENABLED(USE_TINY_PRINTF) va_list args; char buf[40]; diff --git a/drivers/gpio/pca953x.c b/drivers/gpio/pca953x.c index fc4dcf9f98..2fb14590c0 100644 --- a/drivers/gpio/pca953x.c +++ b/drivers/gpio/pca953x.c @@ -143,7 +143,7 @@ int pca953x_get_val(uint8_t chip) return (int)val; } -#if defined(CONFIG_CMD_PCA953X) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_CMD_PCA953X) && !defined(CONFIG_XPL_BUILD) /* * Display pca953x information */ diff --git a/drivers/gpio/rk_gpio.c b/drivers/gpio/rk_gpio.c index 24ba12dd82..57c49c7593 100644 --- a/drivers/gpio/rk_gpio.c +++ b/drivers/gpio/rk_gpio.c @@ -126,7 +126,7 @@ static int rockchip_gpio_get_function(struct udevice *dev, unsigned offset) } /* Simple SPL interface to GPIOs */ -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD enum { PULL_NONE_1V8 = 0, @@ -169,7 +169,7 @@ int spl_gpio_output(void *vregs, uint gpio, int value) return 0; } -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */ static int rockchip_gpio_probe(struct udevice *dev) { diff --git a/drivers/gpio/s5p_gpio.c b/drivers/gpio/s5p_gpio.c index 83e65aa4ae..53dbbe97b5 100644 --- a/drivers/gpio/s5p_gpio.c +++ b/drivers/gpio/s5p_gpio.c @@ -92,7 +92,7 @@ static void s5p_gpio_set_value(struct s5p_gpio_bank *bank, int gpio, int en) writel(value, &bank->dat); } -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* Common GPIO API - SPL does not support driver model yet */ int gpio_set_value(unsigned gpio, int value) { @@ -118,7 +118,7 @@ static unsigned int s5p_gpio_get_value(struct s5p_gpio_bank *bank, int gpio) value = readl(&bank->dat); return !!(value & DAT_MASK(gpio)); } -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */ static void s5p_gpio_set_pull(struct s5p_gpio_bank *bank, int gpio, int mode) { @@ -185,7 +185,7 @@ int s5p_gpio_get_pin(unsigned gpio) } /* Driver model interface */ -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD /* set GPIO pin 'gpio' as an input */ static int exynos_gpio_direction_input(struct udevice *dev, unsigned offset) { @@ -230,7 +230,7 @@ static int exynos_gpio_set_value(struct udevice *dev, unsigned offset, return 0; } -#endif /* nCONFIG_SPL_BUILD */ +#endif /* nCONFIG_XPL_BUILD */ /* * There is no common GPIO API for pull, drv, pin, rate (yet). These @@ -260,7 +260,7 @@ void gpio_set_rate(int gpio, int mode) s5p_gpio_get_pin(gpio), mode); } -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static int exynos_gpio_get_function(struct udevice *dev, unsigned offset) { struct exynos_bank_info *state = dev_get_priv(dev); diff --git a/drivers/gpio/sunxi_gpio.c b/drivers/gpio/sunxi_gpio.c index 218ca2af39..2ca4960f17 100644 --- a/drivers/gpio/sunxi_gpio.c +++ b/drivers/gpio/sunxi_gpio.c @@ -245,7 +245,7 @@ int sunxi_name_to_gpio(const char *name) { unsigned int gpio; int ret; -#if !defined CONFIG_SPL_BUILD && defined CONFIG_AXP_GPIO +#if !defined CONFIG_XPL_BUILD && defined CONFIG_AXP_GPIO char lookup[8]; if (strcasecmp(name, "AXP0-VBUS-ENABLE") == 0) { diff --git a/drivers/gpio/tca642x.c b/drivers/gpio/tca642x.c index 1d45b50074..8307a07e14 100644 --- a/drivers/gpio/tca642x.c +++ b/drivers/gpio/tca642x.c @@ -164,7 +164,7 @@ int tca642x_set_inital_state(uchar chip, struct tca642x_bank_info init_data[]) return ret; } -#if defined(CONFIG_CMD_TCA642X) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_CMD_TCA642X) && !defined(CONFIG_XPL_BUILD) /* * Display tca642x information */ diff --git a/drivers/gpio/tegra_gpio.c b/drivers/gpio/tegra_gpio.c index 0c40d36c41..6cafffaad9 100644 --- a/drivers/gpio/tegra_gpio.c +++ b/drivers/gpio/tegra_gpio.c @@ -323,7 +323,7 @@ static int gpio_tegra_bind(struct udevice *parent) return 0; /* TODO(sjg@chromium.org): Remove once SPL supports device tree */ -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD ctlr = (struct gpio_ctlr *)NV_PA_GPIO_BASE; bank_count = TEGRA_GPIO_BANKS; #else diff --git a/drivers/input/Makefile b/drivers/input/Makefile index 71f315adf6..3e855346bc 100644 --- a/drivers/input/Makefile +++ b/drivers/input/Makefile @@ -8,7 +8,7 @@ obj-$(CONFIG_$(SPL_TPL_)OF_CONTROL) += key_matrix.o obj-$(CONFIG_$(SPL_TPL_)DM_KEYBOARD) += input.o keyboard-uclass.o obj-$(CONFIG_BUTTON_KEYBOARD) += button_kbd.o -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-$(CONFIG_APPLE_SPI_KEYB) += apple_spi_kbd.o obj-$(CONFIG_I8042_KEYB) += i8042.o diff --git a/drivers/mailbox/zynqmp-ipi.c b/drivers/mailbox/zynqmp-ipi.c index 4df69734ed..713d93a200 100644 --- a/drivers/mailbox/zynqmp-ipi.c +++ b/drivers/mailbox/zynqmp-ipi.c @@ -108,7 +108,7 @@ static int zynqmp_ipi_send(struct mbox_chan *chan, const void *data) writel(msg->buf[i], &mbx[i]); /* Use SMC calls for Exception Level less than 3 where TF-A is available */ - if (!IS_ENABLED(CONFIG_SPL_BUILD) && current_el() < 3) { + if (!IS_ENABLED(CONFIG_XPL_BUILD) && current_el() < 3) { ret = zynqmp_ipi_fw_call(zynqmp, SMC_IPI_MAILBOX_NOTIFY, 0); debug("%s, send %ld bytes\n", __func__, msg->len); @@ -148,7 +148,7 @@ static int zynqmp_ipi_recv(struct mbox_chan *chan, void *data) msg->buf[i] = readl(&mbx[i]); /* Ack to remote if EL is not 3 */ - if (!IS_ENABLED(CONFIG_SPL_BUILD) && current_el() < 3) { + if (!IS_ENABLED(CONFIG_XPL_BUILD) && current_el() < 3) { ret = zynqmp_ipi_fw_call(zynqmp, SMC_IPI_MAILBOX_ACK, IPI_SMC_ACK_EIRQ_MASK); } @@ -168,7 +168,7 @@ static int zynqmp_ipi_dest_probe(struct udevice *dev) node = dev_ofnode(dev); - if (IS_ENABLED(CONFIG_SPL_BUILD) || of_machine_is_compatible("xlnx,zynqmp")) + if (IS_ENABLED(CONFIG_XPL_BUILD) || of_machine_is_compatible("xlnx,zynqmp")) zynqmp->el3_supported = true; ret = dev_read_u32(dev->parent, "xlnx,ipi-id", &zynqmp->local_id); diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index e53d52c47b..51ef51f1ed 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -10,7 +10,7 @@ obj-$(CONFIG_$(SPL_TPL_)CROS_EC) += cros_ec.o obj-$(CONFIG_$(SPL_TPL_)CROS_EC_SANDBOX) += cros_ec_sandbox.o obj-$(CONFIG_$(SPL_TPL_)CROS_EC_LPC) += cros_ec_lpc.o -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-$(CONFIG_SANDBOX) += sandbox_adder.o obj-$(CONFIG_CROS_EC_I2C) += cros_ec_i2c.o obj-$(CONFIG_CROS_EC_SPI) += cros_ec_spi.o @@ -19,13 +19,13 @@ obj-$(CONFIG_SANDBOX) += swap_case.o endif ifdef CONFIG_$(SPL_)DM_I2C -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-$(CONFIG_SANDBOX) += i2c_eeprom_emul.o obj-$(CONFIG_USB_HUB_USB251XB) += usb251xb.o endif endif ifdef CONFIG_SPL_OF_PLATDATA -ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-$(CONFIG_SANDBOX) += spltest_sandbox.o endif endif diff --git a/drivers/misc/gsc.c b/drivers/misc/gsc.c index feb02f9706..dee0bdd966 100644 --- a/drivers/misc/gsc.c +++ b/drivers/misc/gsc.c @@ -389,7 +389,7 @@ static int gsc_probe(struct udevice *dev) if (priv->rtc) dev_set_priv(priv->rtc, priv); -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD gsc_banner(dev); #endif diff --git a/drivers/misc/imx8/scu.c b/drivers/misc/imx8/scu.c index bbd7e24200..5d3db0bc4d 100644 --- a/drivers/misc/imx8/scu.c +++ b/drivers/misc/imx8/scu.c @@ -191,7 +191,7 @@ static int imx8_scu_probe(struct udevice *dev) if (addr == FDT_ADDR_T_NONE) return -EINVAL; -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD plat->base = (struct mu_type *)CONFIG_MU_BASE_SPL; #else plat->base = (struct mu_type *)addr; diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile index 235c477c2e..952201923d 100644 --- a/drivers/mmc/Makefile +++ b/drivers/mmc/Makefile @@ -20,7 +20,7 @@ endif obj-$(CONFIG_SUPPORT_EMMC_BOOT) += mmc_boot.o -ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-$(CONFIG_SPL_MMC_BOOT) += fsl_esdhc_spl.o endif diff --git a/drivers/mmc/mmc-uclass.c b/drivers/mmc/mmc-uclass.c index 83cdc9fd66..c8db4f811c 100644 --- a/drivers/mmc/mmc-uclass.c +++ b/drivers/mmc/mmc-uclass.c @@ -301,7 +301,7 @@ struct mmc *find_mmc_device(int dev_num) ret = blk_find_device(UCLASS_MMC, dev_num, &dev); if (ret) { -#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) +#if !defined(CONFIG_XPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) printf("MMC Device %d not found\n", dev_num); #endif return NULL; @@ -373,7 +373,7 @@ void mmc_do_preinit(void) } } -#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) +#if !defined(CONFIG_XPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) void print_mmc_devices(char separator) { struct udevice *dev; diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index 7e702c3ae8..1c5c4b3335 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -328,7 +328,7 @@ int mmc_poll_for_busy(struct mmc *mmc, int timeout_ms) break; if (status & MMC_STATUS_MASK) { -#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) +#if !defined(CONFIG_XPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) log_err("Status Error: %#08x\n", status); #endif return -ECOMM; @@ -341,7 +341,7 @@ int mmc_poll_for_busy(struct mmc *mmc, int timeout_ms) } if (timeout_ms <= 0) { -#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) +#if !defined(CONFIG_XPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) log_err("Timeout waiting card ready\n"); #endif return -ETIMEDOUT; @@ -483,7 +483,7 @@ static int mmc_read_blocks(struct mmc *mmc, void *dst, lbaint_t start, if (blkcnt > 1) { if (mmc_send_stop_transmission(mmc, false)) { -#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) +#if !defined(CONFIG_XPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) log_err("mmc fail to send stop cmd\n"); #endif return 0; @@ -534,7 +534,7 @@ ulong mmc_bread(struct blk_desc *block_dev, lbaint_t start, lbaint_t blkcnt, return 0; if ((start + blkcnt) > block_dev->lba) { -#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) +#if !defined(CONFIG_XPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) log_err("MMC: block number 0x" LBAF " exceeds max(0x" LBAF ")\n", start + blkcnt, block_dev->lba); #endif @@ -2424,7 +2424,7 @@ static int mmc_startup_v4(struct mmc *mmc) mmc->capacity_gp[i] <<= 19; } -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD if (part_completed) { mmc->enh_user_size = (ext_csd[EXT_CSD_ENH_SIZE_MULT + 2] << 16) + @@ -2723,7 +2723,7 @@ static int mmc_startup(struct mmc *mmc) bdesc->blksz = mmc->read_bl_len; bdesc->log2blksz = LOG2(bdesc->blksz); bdesc->lba = lldiv(mmc->capacity, mmc->read_bl_len); -#if !defined(CONFIG_SPL_BUILD) || \ +#if !defined(CONFIG_XPL_BUILD) || \ (defined(CONFIG_SPL_LIBCOMMON_SUPPORT) && \ !CONFIG_IS_ENABLED(USE_TINY_PRINTF)) sprintf(bdesc->vendor, "Man %06x Snr %04x%04x", @@ -2741,7 +2741,7 @@ static int mmc_startup(struct mmc *mmc) bdesc->revision[0] = 0; #endif -#if !defined(CONFIG_DM_MMC) && (!defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBDISK_SUPPORT)) +#if !defined(CONFIG_DM_MMC) && (!defined(CONFIG_XPL_BUILD) || defined(CONFIG_SPL_LIBDISK_SUPPORT)) part_init(bdesc); #endif @@ -2953,7 +2953,7 @@ retry: err = mmc_send_op_cond(mmc); if (err) { -#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) +#if !defined(CONFIG_XPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) if (!quiet) log_err("Card did not respond to voltage select! : %d\n", err); @@ -3008,7 +3008,7 @@ int mmc_start_init(struct mmc *mmc) #endif if (no_card) { mmc->has_init = 0; -#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) +#if !defined(CONFIG_XPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) log_err("MMC: no card present\n"); #endif return -ENOMEDIUM; @@ -3170,7 +3170,7 @@ int mmc_initialize(struct bd_info *bis) if (ret) return ret; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD print_mmc_devices(','); #endif diff --git a/drivers/mmc/mmc_legacy.c b/drivers/mmc/mmc_legacy.c index a87d2276c1..8f8ba34be7 100644 --- a/drivers/mmc/mmc_legacy.c +++ b/drivers/mmc/mmc_legacy.c @@ -44,7 +44,7 @@ struct mmc *find_mmc_device(int dev_num) return m; } -#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) +#if !defined(CONFIG_XPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) printf("MMC Device %d not found\n", dev_num); #endif @@ -93,7 +93,7 @@ void mmc_list_add(struct mmc *mmc) list_add_tail(&mmc->link, &mmc_devices); } -#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) +#if !defined(CONFIG_XPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) void print_mmc_devices(char separator) { struct mmc *m; diff --git a/drivers/mmc/mmc_private.h b/drivers/mmc/mmc_private.h index b32123758e..fc45f017e5 100644 --- a/drivers/mmc/mmc_private.h +++ b/drivers/mmc/mmc_private.h @@ -67,7 +67,7 @@ static inline ulong mmc_bwrite(struct blk_desc *block_dev, lbaint_t start, } #endif -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */ #ifdef CONFIG_MMC_TRACE void mmmc_trace_before_send(struct mmc *mmc, struct mmc_cmd *cmd); diff --git a/drivers/mmc/omap_hsmmc.c b/drivers/mmc/omap_hsmmc.c index 8e51453d2a..e66ab25d02 100644 --- a/drivers/mmc/omap_hsmmc.c +++ b/drivers/mmc/omap_hsmmc.c @@ -59,8 +59,8 @@ DECLARE_GLOBAL_DATA_PTR; /* simplify defines to OMAP_HSMMC_USE_GPIO */ -#if (defined(CONFIG_OMAP_GPIO) && !defined(CONFIG_SPL_BUILD)) || \ - (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_GPIO)) +#if (defined(CONFIG_OMAP_GPIO) && !defined(CONFIG_XPL_BUILD)) || \ + (defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_GPIO)) #define OMAP_HSMMC_USE_GPIO #else #undef OMAP_HSMMC_USE_GPIO diff --git a/drivers/mmc/rockchip_dw_mmc.c b/drivers/mmc/rockchip_dw_mmc.c index fb77b04983..ca5752d24f 100644 --- a/drivers/mmc/rockchip_dw_mmc.c +++ b/drivers/mmc/rockchip_dw_mmc.c @@ -83,7 +83,7 @@ static int rockchip_dwmmc_of_to_plat(struct udevice *dev) return -EINVAL; priv->fifo_mode = dev_read_bool(dev, "fifo-mode"); -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD if (!priv->fifo_mode) priv->fifo_mode = dev_read_bool(dev, "u-boot,spl-fifo-mode"); #endif diff --git a/drivers/mmc/rockchip_sdhci.c b/drivers/mmc/rockchip_sdhci.c index 35667b86b5..a25bcaf017 100644 --- a/drivers/mmc/rockchip_sdhci.c +++ b/drivers/mmc/rockchip_sdhci.c @@ -609,7 +609,7 @@ static int rockchip_sdhci_probe(struct udevice *dev) * Disable use of DMA and force use of PIO mode in SPL to fix an issue * where loading part of TF-A into SRAM using DMA silently fails. */ - if (IS_ENABLED(CONFIG_SPL_BUILD) && + if (IS_ENABLED(CONFIG_XPL_BUILD) && dev_read_bool(dev, "u-boot,spl-fifo-mode")) host->flags &= ~USE_DMA; diff --git a/drivers/mmc/socfpga_dw_mmc.c b/drivers/mmc/socfpga_dw_mmc.c index 3147d3019c..9dc1ceaa09 100644 --- a/drivers/mmc/socfpga_dw_mmc.c +++ b/drivers/mmc/socfpga_dw_mmc.c @@ -61,7 +61,7 @@ static int socfpga_dwmci_clksel(struct dwmci_host *host) debug("%s: drvsel %d smplsel %d\n", __func__, priv->drvsel, priv->smplsel); -#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_ATF) +#if !defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_ATF) int ret; ret = socfpga_secure_reg_write32(SOCFPGA_SECURE_REG_SYSMGR_SOC64_SDMMC, diff --git a/drivers/mmc/tmio-common.c b/drivers/mmc/tmio-common.c index 0b396122b4..9fff1bc1a1 100644 --- a/drivers/mmc/tmio-common.c +++ b/drivers/mmc/tmio-common.c @@ -385,7 +385,7 @@ static bool tmio_sd_addr_is_dmaable(struct mmc_data *data) return false; } -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD if (IS_ENABLED(CONFIG_ARCH_UNIPHIER) && !IS_ENABLED(CONFIG_ARM64)) { /* * For UniPhier ARMv7 SoCs, the stack is allocated in locked diff --git a/drivers/mmc/uniphier-sd.c b/drivers/mmc/uniphier-sd.c index 5b3650d52e..cc89ff767a 100644 --- a/drivers/mmc/uniphier-sd.c +++ b/drivers/mmc/uniphier-sd.c @@ -36,7 +36,7 @@ static ulong uniphier_sd_clk_get_rate(struct tmio_sd_priv *priv) { #if CONFIG_IS_ENABLED(CLK) return clk_get_rate(&priv->clk); -#elif CONFIG_SPL_BUILD +#elif CONFIG_XPL_BUILD return 100000000; #else return 0; @@ -50,7 +50,7 @@ static int uniphier_sd_probe(struct udevice *dev) priv->clk_get_rate = uniphier_sd_clk_get_rate; priv->read_poll_flag = TMIO_SD_DMA_INFO1_END_RD2; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD int ret; ret = clk_get_by_index(dev, 0, &priv->clk); diff --git a/drivers/mmc/zynq_sdhci.c b/drivers/mmc/zynq_sdhci.c index 24d0556cd3..0e2bdab4e7 100644 --- a/drivers/mmc/zynq_sdhci.c +++ b/drivers/mmc/zynq_sdhci.c @@ -289,7 +289,7 @@ static inline int arasan_zynqmp_set_in_tapdelay(u32 node_id, u32 itap_delay) { int ret; - if (IS_ENABLED(CONFIG_SPL_BUILD) || current_el() == 3) { + if (IS_ENABLED(CONFIG_XPL_BUILD) || current_el() == 3) { if (node_id == NODE_SD_0) { ret = zynqmp_mmio_write(SD_ITAP_DLY, SD0_ITAPCHGWIN, SD0_ITAPCHGWIN); @@ -339,7 +339,7 @@ static inline int arasan_zynqmp_set_in_tapdelay(u32 node_id, u32 itap_delay) static inline int arasan_zynqmp_set_out_tapdelay(u32 node_id, u32 otap_delay) { - if (IS_ENABLED(CONFIG_SPL_BUILD) || current_el() == 3) { + if (IS_ENABLED(CONFIG_XPL_BUILD) || current_el() == 3) { if (node_id == NODE_SD_0) return zynqmp_mmio_write(SD_OTAP_DLY, SD0_OTAPDLYSEL_MASK, @@ -356,7 +356,7 @@ static inline int arasan_zynqmp_set_out_tapdelay(u32 node_id, u32 otap_delay) static inline int zynqmp_dll_reset(u32 node_id, u32 type) { - if (IS_ENABLED(CONFIG_SPL_BUILD) || current_el() == 3) { + if (IS_ENABLED(CONFIG_XPL_BUILD) || current_el() == 3) { if (node_id == NODE_SD_0) return zynqmp_mmio_write(SD_DLL_CTRL, SD0_DLL_RST, type == PM_DLL_RESET_ASSERT ? diff --git a/drivers/mtd/Makefile b/drivers/mtd/Makefile index 10d575e9f9..db010417b8 100644 --- a/drivers/mtd/Makefile +++ b/drivers/mtd/Makefile @@ -16,7 +16,7 @@ mtd-$(CONFIG_RENESAS_RPC_HF) += renesas_rpc_hf.o mtd-$(CONFIG_HBMC_AM654) += hbmc-am654.o # U-Boot build -ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),) +ifeq ($(CONFIG_XPL_BUILD)$(CONFIG_TPL_BUILD),) ifneq ($(mtd-y),) obj-y += mtd.o diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index 96e186600a..68b53dced1 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -1,6 +1,6 @@ # SPDX-License-Identifier: GPL-2.0+ -ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),) +ifeq ($(CONFIG_XPL_BUILD)$(CONFIG_TPL_BUILD),) nandcore-objs := core.o bbt.o obj-$(CONFIG_MTD_NAND_CORE) += nandcore.o obj-$(CONFIG_MTD_RAW_NAND) += raw/ diff --git a/drivers/mtd/nand/raw/Makefile b/drivers/mtd/nand/raw/Makefile index 46fead6fa4..ca10ac7aec 100644 --- a/drivers/mtd/nand/raw/Makefile +++ b/drivers/mtd/nand/raw/Makefile @@ -3,7 +3,7 @@ # (C) Copyright 2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. -ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD ifdef CONFIG_SPL_NAND_DRIVERS NORMAL_DRIVERS=y diff --git a/drivers/mtd/nand/raw/atmel_nand.c b/drivers/mtd/nand/raw/atmel_nand.c index 4dbf7b4713..605298628d 100644 --- a/drivers/mtd/nand/raw/atmel_nand.c +++ b/drivers/mtd/nand/raw/atmel_nand.c @@ -1251,7 +1251,7 @@ static int at91_nand_ready(struct mtd_info *mtd) } #endif -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* The following code is for SPL */ static struct mtd_info *mtd; static struct nand_chip nand_chip; @@ -1526,4 +1526,4 @@ void board_nand_init(void) if (atmel_nand_chip_init(i, base_addr[i])) log_err("atmel_nand: Fail to initialize #%d chip", i); } -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */ diff --git a/drivers/mtd/nand/raw/lpc32xx_nand_mlc.c b/drivers/mtd/nand/raw/lpc32xx_nand_mlc.c index c89661badb..4430c4e93e 100644 --- a/drivers/mtd/nand/raw/lpc32xx_nand_mlc.c +++ b/drivers/mtd/nand/raw/lpc32xx_nand_mlc.c @@ -152,7 +152,7 @@ static void lpc32xx_nand_init(void) &lpc32xx_nand_mlc_registers->time_reg); } -#if !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_XPL_BUILD) /** * lpc32xx_cmd_ctrl - write command to either cmd or data register @@ -606,7 +606,7 @@ void board_nand_init(void) pr_err("nand_register returned %i", ret); } -#else /* defined(CONFIG_SPL_BUILD) */ +#else /* defined(CONFIG_XPL_BUILD) */ void nand_init(void) { @@ -770,4 +770,4 @@ unsigned int nand_page_size(void) return BYTES_PER_PAGE; } -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */ diff --git a/drivers/mtd/nand/raw/lpc32xx_nand_slc.c b/drivers/mtd/nand/raw/lpc32xx_nand_slc.c index 4d643bc64b..109c31fb4d 100644 --- a/drivers/mtd/nand/raw/lpc32xx_nand_slc.c +++ b/drivers/mtd/nand/raw/lpc32xx_nand_slc.c @@ -84,7 +84,7 @@ static struct nand_ecclayout lpc32xx_nand_oob_16 = { } }; -#if defined(CONFIG_DMA_LPC32XX) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_DMA_LPC32XX) && !defined(CONFIG_XPL_BUILD) #define ECCSTEPS (CONFIG_SYS_NAND_PAGE_SIZE / CFG_SYS_NAND_ECCSIZE) /* @@ -162,7 +162,7 @@ static int lpc32xx_nand_dev_ready(struct mtd_info *mtd) return readl(&lpc32xx_nand_slc_regs->stat) & STAT_NAND_READY; } -#if defined(CONFIG_DMA_LPC32XX) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_DMA_LPC32XX) && !defined(CONFIG_XPL_BUILD) /* * Prepares DMA descriptors for NAND RD/WR operations * If the size is < 256 Bytes then it is assumed to be @@ -510,7 +510,7 @@ static void lpc32xx_write_byte(struct mtd_info *mtd, uint8_t byte) */ int board_nand_init(struct nand_chip *lpc32xx_chip) { -#if defined(CONFIG_DMA_LPC32XX) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_DMA_LPC32XX) && !defined(CONFIG_XPL_BUILD) int ret; /* Acquire a channel for our use */ @@ -533,7 +533,7 @@ int board_nand_init(struct nand_chip *lpc32xx_chip) lpc32xx_chip->read_byte = lpc32xx_read_byte; lpc32xx_chip->write_byte = lpc32xx_write_byte; -#if defined(CONFIG_DMA_LPC32XX) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_DMA_LPC32XX) && !defined(CONFIG_XPL_BUILD) /* Hardware ECC calculation is supported when DMA driver is selected */ lpc32xx_chip->ecc.mode = NAND_ECC_HW; diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c index 0545c23e26..1b65c6f644 100644 --- a/drivers/mtd/nand/raw/nand_base.c +++ b/drivers/mtd/nand/raw/nand_base.c @@ -414,7 +414,7 @@ static int nand_block_markbad_lowlevel(struct mtd_info *mtd, loff_t ofs) { struct nand_chip *chip = mtd_to_nand(mtd); int ret = 0; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD int res; #endif @@ -434,7 +434,7 @@ static int nand_block_markbad_lowlevel(struct mtd_info *mtd, loff_t ofs) nand_release_device(mtd); } -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD /* Mark block bad in BBT */ if (chip->bbt) { res = nand_markbad_bbt(mtd, ofs); @@ -488,7 +488,7 @@ static int nand_block_isreserved(struct mtd_info *mtd, loff_t ofs) if (!chip->bbt) return 0; /* Return info from the table */ -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD return nand_isreserved_bbt(mtd, ofs); #else return 0; @@ -518,7 +518,7 @@ static int nand_block_checkbad(struct mtd_info *mtd, loff_t ofs, int allowbbt) return chip->block_bad(mtd, ofs); /* Return info from the table */ -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD return nand_isbad_bbt(mtd, ofs, allowbbt); #else return 0; @@ -3729,7 +3729,7 @@ static void nand_set_defaults(struct nand_chip *chip, int busw) if (!chip->read_buf || chip->read_buf == nand_read_buf) chip->read_buf = busw ? nand_read_buf16 : nand_read_buf; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD if (!chip->scan_bbt) chip->scan_bbt = nand_default_bbt; #endif diff --git a/drivers/mtd/nand/raw/omap_gpmc.c b/drivers/mtd/nand/raw/omap_gpmc.c index a36e2a148c..9c704c60e8 100644 --- a/drivers/mtd/nand/raw/omap_gpmc.c +++ b/drivers/mtd/nand/raw/omap_gpmc.c @@ -1011,7 +1011,7 @@ static int omap_select_ecc_scheme(struct nand_chip *nand, return 0; } -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD /* * omap_nand_switch_ecc - switch the ECC operation between different engines * (h/w and s/w) and different algorithms (hamming and BCHx) @@ -1072,7 +1072,7 @@ int __maybe_unused omap_nand_switch_ecc(uint32_t hardware, uint32_t eccstrength) err = nand_scan_tail(mtd); return err; } -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */ /* * Board-specific NAND initialization. The following members of the diff --git a/drivers/mtd/nand/raw/sand_nand.c b/drivers/mtd/nand/raw/sand_nand.c index 456e841b1c..3678bb8a41 100644 --- a/drivers/mtd/nand/raw/sand_nand.c +++ b/drivers/mtd/nand/raw/sand_nand.c @@ -680,7 +680,7 @@ void board_nand_init(void) log_info("Failed to get sandbox NAND: %d\n", err); } -#if IS_ENABLED(CONFIG_SPL_BUILD) && IS_ENABLED(CONFIG_SPL_NAND_INIT) +#if IS_ENABLED(CONFIG_XPL_BUILD) && IS_ENABLED(CONFIG_SPL_NAND_INIT) void nand_deselect(void) { nand_chip->select_chip(nand_to_mtd(nand_chip), -1); diff --git a/drivers/mtd/onenand/Makefile b/drivers/mtd/onenand/Makefile index 4dc417a579..7f4a8514c1 100644 --- a/drivers/mtd/onenand/Makefile +++ b/drivers/mtd/onenand/Makefile @@ -3,7 +3,7 @@ # Copyright (C) 2005-2007 Samsung Electronics. # Kyungmin Park -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-$(CONFIG_CMD_ONENAND) := onenand_uboot.o onenand_base.o onenand_bbt.o obj-$(CONFIG_SAMSUNG_ONENAND) += samsung.o else diff --git a/drivers/mtd/spi/Makefile b/drivers/mtd/spi/Makefile index 409395382f..2a287a62a4 100644 --- a/drivers/mtd/spi/Makefile +++ b/drivers/mtd/spi/Makefile @@ -6,7 +6,7 @@ obj-$(CONFIG_$(SPL_TPL_)DM_SPI_FLASH) += sf-uclass.o spi-nor-y := sf_probe.o spi-nor-ids.o -ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-$(CONFIG_SPL_SPI_BOOT) += fsl_espi_spl.o ifeq ($(CONFIG_$(SPL_TPL_)SPI_FLASH_TINY),y) spi-nor-y += spi-nor-tiny.o diff --git a/drivers/mtd/spi/sf-uclass.c b/drivers/mtd/spi/sf-uclass.c index a4d15bd64a..102a923682 100644 --- a/drivers/mtd/spi/sf-uclass.c +++ b/drivers/mtd/spi/sf-uclass.c @@ -54,7 +54,7 @@ struct spi_flash *spi_flash_probe(unsigned int busnum, unsigned int cs, struct udevice *bus; char *str; -#if defined(CONFIG_SPL_BUILD) && CONFIG_IS_ENABLED(USE_TINY_PRINTF) +#if defined(CONFIG_XPL_BUILD) && CONFIG_IS_ENABLED(USE_TINY_PRINTF) str = "spi_flash"; #else char name[30]; diff --git a/drivers/mtd/spi/sf_dataflash.c b/drivers/mtd/spi/sf_dataflash.c index 6db24189c8..438eb3698d 100644 --- a/drivers/mtd/spi/sf_dataflash.c +++ b/drivers/mtd/spi/sf_dataflash.c @@ -438,7 +438,7 @@ static int add_dataflash(struct udevice *dev, char *name, int nr_pages, spi_flash->size = nr_pages * pagesize; spi_flash->erase_size = pagesize; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD printf("SPI DataFlash: Detected %s with page size ", spi_flash->name); print_size(spi_flash->page_size, ", erase size "); print_size(spi_flash->erase_size, ", total "); diff --git a/drivers/mtd/spi/spi-nor-core.c b/drivers/mtd/spi/spi-nor-core.c index 8f7a77e716..b29b390a0a 100644 --- a/drivers/mtd/spi/spi-nor-core.c +++ b/drivers/mtd/spi/spi-nor-core.c @@ -1030,7 +1030,7 @@ static int spi_nor_erase(struct mtd_info *mtd, struct erase_info *instr) while (len) { schedule(); - if (!IS_ENABLED(CONFIG_SPL_BUILD) && ctrlc()) { + if (!IS_ENABLED(CONFIG_XPL_BUILD) && ctrlc()) { addr_known = false; ret = -EINTR; goto erase_err; @@ -4262,7 +4262,7 @@ int spi_nor_scan(struct spi_nor *nor) nor->erase_size = mtd->erasesize; nor->sector_size = mtd->erasesize; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD printf("SF: Detected %s with page size ", nor->name); print_size(nor->page_size, ", erase size "); print_size(nor->erase_size, ", total "); diff --git a/drivers/net/dwc_eth_xgmac_socfpga.c b/drivers/net/dwc_eth_xgmac_socfpga.c index 270c1b0ca6..87fb7e887e 100644 --- a/drivers/net/dwc_eth_xgmac_socfpga.c +++ b/drivers/net/dwc_eth_xgmac_socfpga.c @@ -37,7 +37,7 @@ static int dwxgmac_socfpga_do_setphy(struct udevice *dev, u32 modereg) u32 modemask = SYSMGR_EMACGRP_CTRL_PHYSEL_MASK << xgmac->syscon_phy_regshift; - if (!(IS_ENABLED(CONFIG_SPL_BUILD)) && IS_ENABLED(CONFIG_SPL_ATF)) { + if (!(IS_ENABLED(CONFIG_XPL_BUILD)) && IS_ENABLED(CONFIG_SPL_ATF)) { u32 index = ((u64)xgmac->syscon_phy - socfpga_get_sysmgr_addr() - SYSMGR_SOC64_EMAC0) >> 2; diff --git a/drivers/net/dwmac_socfpga.c b/drivers/net/dwmac_socfpga.c index bba3fc4d34..a9e2d8c097 100644 --- a/drivers/net/dwmac_socfpga.c +++ b/drivers/net/dwmac_socfpga.c @@ -68,7 +68,7 @@ static int dwmac_socfpga_do_setphy(struct udevice *dev, u32 modereg) struct dwmac_socfpga_plat *pdata = dev_get_plat(dev); u32 modemask = SYSMGR_EMACGRP_CTRL_PHYSEL_MASK << pdata->reg_shift; -#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_ATF) +#if !defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_ATF) u32 index = ((u64)pdata->phy_intf - socfpga_get_sysmgr_addr() - SYSMGR_SOC64_EMAC0) >> 2; diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c index ede3959c94..2c373c7c12 100644 --- a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c +++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c @@ -671,7 +671,7 @@ const struct pinctrl_ops mtk_pinctrl_ops = { }; #if CONFIG_IS_ENABLED(DM_GPIO) || \ - (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_GPIO)) + (defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_GPIO)) static int mtk_gpio_get(struct udevice *dev, unsigned int off) { int val, err; @@ -814,7 +814,7 @@ int mtk_pinctrl_common_probe(struct udevice *dev, } #if CONFIG_IS_ENABLED(DM_GPIO) || \ - (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_GPIO)) + (defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_GPIO)) ret = mtk_gpiochip_register(dev); #endif diff --git a/drivers/pinctrl/pinctrl_stm32.c b/drivers/pinctrl/pinctrl_stm32.c index eada100124..fbf0271f08 100644 --- a/drivers/pinctrl/pinctrl_stm32.c +++ b/drivers/pinctrl/pinctrl_stm32.c @@ -39,7 +39,7 @@ struct stm32_gpio_bank { struct list_head list; }; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static char pin_name[PINNAME_SIZE]; static const char * const pinmux_mode[GPIOF_COUNT] = { @@ -488,7 +488,7 @@ static struct pinctrl_ops stm32_pinctrl_ops = { #else /* PINCTRL_FULL */ .set_state_simple = stm32_pinctrl_set_state_simple, #endif /* PINCTRL_FULL */ -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD .get_pin_name = stm32_pinctrl_get_pin_name, .get_pins_count = stm32_pinctrl_get_pins_count, .get_pin_muxing = stm32_pinctrl_get_pin_muxing, diff --git a/drivers/pinctrl/tegra/Makefile b/drivers/pinctrl/tegra/Makefile index 75d3cabc62..b1dda41747 100644 --- a/drivers/pinctrl/tegra/Makefile +++ b/drivers/pinctrl/tegra/Makefile @@ -1,5 +1,5 @@ # SPDX-License-Identifier: GPL-2.0 -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD ifdef CONFIG_TEGRA20 obj-y += pinctrl-tegra20.o else diff --git a/drivers/pinctrl/uniphier/pinctrl-uniphier.h b/drivers/pinctrl/uniphier/pinctrl-uniphier.h index 5951835d6e..da7bb4f637 100644 --- a/drivers/pinctrl/uniphier/pinctrl-uniphier.h +++ b/drivers/pinctrl/uniphier/pinctrl-uniphier.h @@ -126,7 +126,7 @@ struct uniphier_pinctrl_socdata { #define __UNIPHIER_PINMUX_FUNCTION(func) #func -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* * a tricky way to drop unneeded *_pins and *_muxvals arrays from SPL, * suppressing "defined but not used" warnings. diff --git a/drivers/power/Makefile b/drivers/power/Makefile index 6f7e6fb0a6..5a987194cd 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -9,7 +9,7 @@ obj-y += pmic/ obj-y += regulator/ obj-$(CONFIG_AXP221_POWER) += axp221.o -ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-$(CONFIG_AXP152_POWER) += axp152.o obj-$(CONFIG_AXP209_POWER) += axp209.o obj-$(CONFIG_AXP305_POWER) += axp_spl.o diff --git a/drivers/power/pmic/rk8xx.c b/drivers/power/pmic/rk8xx.c index 4d5a5ceafa..a14555cf47 100644 --- a/drivers/power/pmic/rk8xx.c +++ b/drivers/power/pmic/rk8xx.c @@ -237,7 +237,7 @@ static int rk8xx_bind(struct udevice *dev) if (!children) debug("%s: %s - no child found\n", __func__, dev->name); - if (IS_ENABLED(CONFIG_SPL_BUILD) && + if (IS_ENABLED(CONFIG_XPL_BUILD) && IS_ENABLED(CONFIG_ROCKCHIP_RK8XX_DISABLE_BOOT_ON_POWERON)) dev_or_flags(dev, DM_FLAG_PROBE_AFTER_BIND); @@ -331,7 +331,7 @@ static int rk8xx_probe(struct udevice *dev) pmic_reg_read(dev, init_data[i].reg)); } - if (!IS_ENABLED(CONFIG_SPL_BUILD)) { + if (!IS_ENABLED(CONFIG_XPL_BUILD)) { printf("PMIC: RK%x ", show_variant); if (on_source && off_source) printf("(on=0x%02x, off=0x%02x)", diff --git a/drivers/power/pmic/stpmic1.c b/drivers/power/pmic/stpmic1.c index c99a0c27b3..f0415fbd17 100644 --- a/drivers/power/pmic/stpmic1.c +++ b/drivers/power/pmic/stpmic1.c @@ -91,7 +91,7 @@ static int stpmic1_bind(struct udevice *dev) dev_dbg(dev, "no child found\n"); #endif /* DM_REGULATOR */ - if (!IS_ENABLED(CONFIG_SPL_BUILD)) { + if (!IS_ENABLED(CONFIG_XPL_BUILD)) { ret = device_bind_driver(dev, "stpmic1-nvm", "stpmic1-nvm", NULL); if (ret) @@ -124,7 +124,7 @@ U_BOOT_DRIVER(pmic_stpmic1) = { .ops = &stpmic1_ops, }; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static int stpmic1_nvm_rw(struct udevice *dev, u8 addr, u8 *buf, int buf_len, enum pmic_nvm_op op) { @@ -230,7 +230,7 @@ U_BOOT_DRIVER(stpmic1_nvm) = { .id = UCLASS_MISC, .ops = &stpmic1_nvm_ops, }; -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */ #ifdef CONFIG_SYSRESET static int stpmic1_sysreset_request(struct udevice *dev, enum sysreset_t type) diff --git a/drivers/power/power_core.c b/drivers/power/power_core.c index 1caf9f0934..61b2fe5f54 100644 --- a/drivers/power/power_core.c +++ b/drivers/power/power_core.c @@ -78,7 +78,7 @@ struct pmic *pmic_get(const char *s) return NULL; } -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static int pmic_dump(struct pmic *p) { int i, ret; diff --git a/drivers/power/regulator/rk8xx.c b/drivers/power/regulator/rk8xx.c index 34e61511d8..3f18ee65ce 100644 --- a/drivers/power/regulator/rk8xx.c +++ b/drivers/power/regulator/rk8xx.c @@ -16,7 +16,7 @@ #include #include -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD #define ENABLE_DRIVER #endif diff --git a/drivers/power/sy8106a.c b/drivers/power/sy8106a.c index fb6028de71..d9a2b6904b 100644 --- a/drivers/power/sy8106a.c +++ b/drivers/power/sy8106a.c @@ -10,7 +10,7 @@ #define SY8106A_VOUT1_SEL 1 #define SY8106A_VOUT1_SEL_ENABLE (1 << 7) -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD static u8 sy8106a_mvolt_to_cfg(int mvolt, int min, int max, int div) { if (mvolt < min) diff --git a/drivers/ram/Makefile b/drivers/ram/Makefile index fdb2e78ec9..35d8f5761e 100644 --- a/drivers/ram/Makefile +++ b/drivers/ram/Makefile @@ -20,7 +20,7 @@ obj-$(CONFIG_K3_DDRSS) += k3-ddrss/ obj-$(CONFIG_IMXRT_SDRAM) += imxrt_sdram.o obj-$(CONFIG_RAM_SIFIVE) += sifive/ -ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-$(CONFIG_SPL_STARFIVE_DDR) += starfive/ endif diff --git a/drivers/ram/mediatek/ddr3-mt7629.c b/drivers/ram/mediatek/ddr3-mt7629.c index c27c4593b9..e979169706 100644 --- a/drivers/ram/mediatek/ddr3-mt7629.c +++ b/drivers/ram/mediatek/ddr3-mt7629.c @@ -233,7 +233,7 @@ struct mtk_ddr3_priv { struct clk mem_mux; }; -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD static int mtk_ddr3_rank_size_detect(struct udevice *dev) { struct mtk_ddr3_priv *priv = dev_get_priv(dev); @@ -697,7 +697,7 @@ static int mtk_ddr3_probe(struct udevice *dev) if (priv->dramc_ao == FDT_ADDR_T_NONE) return -EINVAL; -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD int ret; ret = clk_get_by_index(dev, 0, &priv->phy); diff --git a/drivers/ram/rockchip/sdram_rk3188.c b/drivers/ram/rockchip/sdram_rk3188.c index 618bce5c9f..ffff7d55f3 100644 --- a/drivers/ram/rockchip/sdram_rk3188.c +++ b/drivers/ram/rockchip/sdram_rk3188.c @@ -84,7 +84,7 @@ const int ddrconf_table[] = { #define DQS_GATE_TRAINING_ERROR_RANK0 (1 << 4) #define DQS_GATE_TRAINING_ERROR_RANK1 (2 << 4) -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD static void copy_to_reg(u32 *dest, const u32 *src, u32 n) { int i; @@ -851,7 +851,7 @@ static int rk3188_dmc_of_to_plat(struct udevice *dev) return 0; } -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */ #if CONFIG_IS_ENABLED(OF_PLATDATA) static int conv_of_plat(struct udevice *dev) @@ -878,7 +878,7 @@ static int conv_of_plat(struct udevice *dev) static int rk3188_dmc_probe(struct udevice *dev) { -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD struct rk3188_sdram_params *plat = dev_get_plat(dev); struct regmap *map; struct udevice *dev_clk; @@ -888,7 +888,7 @@ static int rk3188_dmc_probe(struct udevice *dev) priv->pmu = syscon_get_first_range(ROCKCHIP_SYSCON_PMU); -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #if CONFIG_IS_ENABLED(OF_PLATDATA) ret = conv_of_plat(dev); if (ret) @@ -950,12 +950,12 @@ U_BOOT_DRIVER(rockchip_rk3188_dmc) = { .id = UCLASS_RAM, .of_match = rk3188_dmc_ids, .ops = &rk3188_dmc_ops, -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD .of_to_plat = rk3188_dmc_of_to_plat, #endif .probe = rk3188_dmc_probe, .priv_auto = sizeof(struct dram_info), -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD .plat_auto = sizeof(struct rk3188_sdram_params), #endif }; diff --git a/drivers/ram/rockchip/sdram_rk3288.c b/drivers/ram/rockchip/sdram_rk3288.c index c9f61e933e..25ceab98ee 100644 --- a/drivers/ram/rockchip/sdram_rk3288.c +++ b/drivers/ram/rockchip/sdram_rk3288.c @@ -84,7 +84,7 @@ const int ddrconf_table[] = { #define DQS_GATE_TRAINING_ERROR_RANK1 (2 << 4) #if defined(CONFIG_TPL_BUILD) || \ - (!defined(CONFIG_TPL) && defined(CONFIG_SPL_BUILD)) + (!defined(CONFIG_TPL) && defined(CONFIG_XPL_BUILD)) static void copy_to_reg(u32 *dest, const u32 *src, u32 n) { int i; @@ -1013,7 +1013,7 @@ static int rk3288_dmc_of_to_plat(struct udevice *dev) return 0; } -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */ #if CONFIG_IS_ENABLED(OF_PLATDATA) static int conv_of_plat(struct udevice *dev) @@ -1041,7 +1041,7 @@ static int conv_of_plat(struct udevice *dev) static int rk3288_dmc_probe(struct udevice *dev) { #if defined(CONFIG_TPL_BUILD) || \ - (!defined(CONFIG_TPL) && defined(CONFIG_SPL_BUILD)) + (!defined(CONFIG_TPL) && defined(CONFIG_XPL_BUILD)) struct rk3288_sdram_params *plat = dev_get_plat(dev); struct udevice *dev_clk; struct regmap *map; @@ -1051,7 +1051,7 @@ static int rk3288_dmc_probe(struct udevice *dev) priv->pmu = syscon_get_first_range(ROCKCHIP_SYSCON_PMU); #if defined(CONFIG_TPL_BUILD) || \ - (!defined(CONFIG_TPL) && defined(CONFIG_SPL_BUILD)) + (!defined(CONFIG_TPL) && defined(CONFIG_XPL_BUILD)) #if CONFIG_IS_ENABLED(OF_PLATDATA) ret = conv_of_plat(dev); if (ret) @@ -1119,13 +1119,13 @@ U_BOOT_DRIVER(rockchip_rk3288_dmc) = { .of_match = rk3288_dmc_ids, .ops = &rk3288_dmc_ops, #if defined(CONFIG_TPL_BUILD) || \ - (!defined(CONFIG_TPL) && defined(CONFIG_SPL_BUILD)) + (!defined(CONFIG_TPL) && defined(CONFIG_XPL_BUILD)) .of_to_plat = rk3288_dmc_of_to_plat, #endif .probe = rk3288_dmc_probe, .priv_auto = sizeof(struct dram_info), #if defined(CONFIG_TPL_BUILD) || \ - (!defined(CONFIG_TPL) && defined(CONFIG_SPL_BUILD)) + (!defined(CONFIG_TPL) && defined(CONFIG_XPL_BUILD)) .plat_auto = sizeof(struct rk3288_sdram_params), #endif }; diff --git a/drivers/ram/rockchip/sdram_rk3399.c b/drivers/ram/rockchip/sdram_rk3399.c index 5676c099a4..6fa8f26877 100644 --- a/drivers/ram/rockchip/sdram_rk3399.c +++ b/drivers/ram/rockchip/sdram_rk3399.c @@ -3196,7 +3196,7 @@ U_BOOT_DRIVER(dmc_rk3399) = { .probe = rk3399_dmc_probe, .priv_auto = sizeof(struct dram_info), #if defined(CONFIG_TPL_BUILD) || \ - (!defined(CONFIG_TPL) && defined(CONFIG_SPL_BUILD)) + (!defined(CONFIG_TPL) && defined(CONFIG_XPL_BUILD)) .plat_auto = sizeof(struct rockchip_dmc_plat), #endif }; diff --git a/drivers/ram/rockchip/sdram_rv1126.c b/drivers/ram/rockchip/sdram_rv1126.c index 4fbb088a8d..b371f597d2 100644 --- a/drivers/ram/rockchip/sdram_rv1126.c +++ b/drivers/ram/rockchip/sdram_rv1126.c @@ -34,7 +34,7 @@ struct dram_info { #if defined(CONFIG_TPL_BUILD) || \ - (!defined(CONFIG_TPL) && defined(CONFIG_SPL_BUILD)) + (!defined(CONFIG_TPL) && defined(CONFIG_XPL_BUILD)) void __iomem *pctl; void __iomem *phy; struct rv1126_cru *cru; @@ -49,7 +49,7 @@ struct dram_info { }; #if defined(CONFIG_TPL_BUILD) || \ - (!defined(CONFIG_TPL) && defined(CONFIG_SPL_BUILD)) + (!defined(CONFIG_TPL) && defined(CONFIG_XPL_BUILD)) #define GRF_BASE_ADDR 0xfe000000 #define PMU_GRF_BASE_ADDR 0xfe020000 @@ -3507,7 +3507,7 @@ error: static int rv1126_dmc_probe(struct udevice *dev) { #if defined(CONFIG_TPL_BUILD) || \ - (!defined(CONFIG_TPL) && defined(CONFIG_SPL_BUILD)) + (!defined(CONFIG_TPL) && defined(CONFIG_XPL_BUILD)) if (rv1126_dmc_init(dev)) return 0; #else diff --git a/drivers/ram/sifive/sifive_ddr.c b/drivers/ram/sifive/sifive_ddr.c index bd2f438d72..c555d2af2d 100644 --- a/drivers/ram/sifive/sifive_ddr.c +++ b/drivers/ram/sifive/sifive_ddr.c @@ -91,7 +91,7 @@ struct sifive_ddr_info { u32 *physical_filter_ctrl; }; -#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD) struct sifive_ddr_params { struct sifive_ddrctl pctl_regs; struct sifive_ddrphy phy_regs; @@ -337,7 +337,7 @@ static int sifive_ddr_probe(struct udevice *dev) priv->info.base = gd->ram_base; priv->info.size = gd->ram_size; -#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD) int ret; u32 clock = 0; @@ -404,7 +404,7 @@ U_BOOT_DRIVER(sifive_ddr) = { .ops = &sifive_ddr_ops, .probe = sifive_ddr_probe, .priv_auto = sizeof(struct sifive_ddr_info), -#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD) .plat_auto = sizeof(struct sifive_dmc_plat), #endif }; diff --git a/drivers/ram/starfive/Makefile b/drivers/ram/starfive/Makefile index 1df42c377b..f1567b04b4 100644 --- a/drivers/ram/starfive/Makefile +++ b/drivers/ram/starfive/Makefile @@ -2,10 +2,10 @@ # # Copyright (c) 2022 StarFive, Inc # -ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-$(CONFIG_SPL_STARFIVE_DDR) += ddrphy_start.o obj-$(CONFIG_SPL_STARFIVE_DDR) += ddrphy_train.o obj-$(CONFIG_SPL_STARFIVE_DDR) += starfive_ddr.o obj-$(CONFIG_SPL_STARFIVE_DDR) += ddrphy_utils.o obj-$(CONFIG_SPL_STARFIVE_DDR) += ddrcsr_boot.o -endif \ No newline at end of file +endif diff --git a/drivers/ram/stm32mp1/stm32mp1_ram.c b/drivers/ram/stm32mp1/stm32mp1_ram.c index debc458c0e..e9cd6229ec 100644 --- a/drivers/ram/stm32mp1/stm32mp1_ram.c +++ b/drivers/ram/stm32mp1/stm32mp1_ram.c @@ -371,7 +371,7 @@ static int stm32mp1_ddr_probe(struct udevice *dev) priv->info.base = STM32_DDR_BASE; - if (IS_ENABLED(CONFIG_SPL_BUILD)) { + if (IS_ENABLED(CONFIG_XPL_BUILD)) { priv->info.size = 0; ret = stm32mp1_ddr_setup(dev); diff --git a/drivers/reset/reset-socfpga.c b/drivers/reset/reset-socfpga.c index 866437fd24..76d108080d 100644 --- a/drivers/reset/reset-socfpga.c +++ b/drivers/reset/reset-socfpga.c @@ -46,7 +46,7 @@ struct socfpga_reset_data { */ static bool socfpga_reset_keep_enabled(void) { -#if !defined(CONFIG_SPL_BUILD) || CONFIG_IS_ENABLED(ENV_SUPPORT) +#if !defined(CONFIG_XPL_BUILD) || CONFIG_IS_ENABLED(ENV_SUPPORT) const char *env_str; long val; diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index 628be4c89f..7c19a43572 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -3,7 +3,7 @@ # (C) Copyright 2000-2007 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-$(CONFIG_SCSI) += scsi.o scsi-uclass.o ifdef CONFIG_SCSI obj-$(CONFIG_$(SPL_TPL_)BOOTSTD) += scsi_bootdev.o @@ -12,7 +12,7 @@ obj-$(CONFIG_SANDBOX) += scsi_emul.o endif endif -ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD ifdef CONFIG_SPL_SATA obj-$(CONFIG_SCSI) += scsi.o scsi-uclass.o endif diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index 78810f9836..66bd30b837 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -63,7 +63,7 @@ obj-$(CONFIG_XEN_SERIAL) += serial_xen.o obj-$(CONFIG_XTENSA_SEMIHOSTING_SERIAL) += serial_xtensa_semihosting.o obj-$(CONFIG_S5P4418_PL011_SERIAL) += serial_s5p4418_pl011.o -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-$(CONFIG_USB_TTY) += usbtty.o endif obj-$(CONFIG_UART4_SERIAL) += serial_adi_uart4.o diff --git a/drivers/serial/atmel_usart.c b/drivers/serial/atmel_usart.c index 7e45a80969..0b35582aaa 100644 --- a/drivers/serial/atmel_usart.c +++ b/drivers/serial/atmel_usart.c @@ -218,7 +218,7 @@ static const struct dm_serial_ops atmel_serial_ops = { .setbrg = atmel_serial_setbrg, }; -#if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_CLK) +#if defined(CONFIG_XPL_BUILD) && !defined(CONFIG_SPL_CLK) static int atmel_serial_enable_clk(struct udevice *dev) { struct atmel_serial_priv *priv = dev_get_priv(dev); diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c index 55bc39648d..3489228127 100644 --- a/drivers/serial/ns16550.c +++ b/drivers/serial/ns16550.c @@ -227,7 +227,7 @@ static void ns16550_setbrg(struct ns16550 *com_port, int baud_divisor) void ns16550_init(struct ns16550 *com_port, int baud_divisor) { -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_OMAP34XX) +#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_OMAP34XX) /* * On some OMAP3/OMAP4 devices when UART3 is configured for boot mode * before SPL starts only THRE bit is set. We have to empty the @@ -303,7 +303,7 @@ void ns16550_putc(struct ns16550 *com_port, char c) char ns16550_getc(struct ns16550 *com_port) { while ((serial_in(&com_port->lsr) & UART_LSR_DR) == 0) { -#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_USB_TTY) +#if !defined(CONFIG_XPL_BUILD) && defined(CONFIG_USB_TTY) extern void usbtty_poll(void); usbtty_poll(); #endif diff --git a/drivers/serial/serial-uclass.c b/drivers/serial/serial-uclass.c index 84f02f7ac7..9feaa1ecee 100644 --- a/drivers/serial/serial-uclass.c +++ b/drivers/serial/serial-uclass.c @@ -101,7 +101,7 @@ static void serial_find_console_or_panic(void) } } } - if (!IS_ENABLED(CONFIG_SPL_BUILD) || !CONFIG_IS_ENABLED(OF_CONTROL) || + if (!IS_ENABLED(CONFIG_XPL_BUILD) || !CONFIG_IS_ENABLED(OF_CONTROL) || !blob) { /* * Try to use CONFIG_CONS_INDEX if available (it is numbered diff --git a/drivers/serial/serial.c b/drivers/serial/serial.c index dc4bb06fa9..e10ca6eef7 100644 --- a/drivers/serial/serial.c +++ b/drivers/serial/serial.c @@ -315,7 +315,7 @@ static struct serial_device *get_current(void) /* We must have a console device */ if (!dev) { -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD puts("Cannot find console\n"); hang(); #else diff --git a/drivers/serial/serial_s5p.c b/drivers/serial/serial_s5p.c index 801b7645af..734780a124 100644 --- a/drivers/serial/serial_s5p.c +++ b/drivers/serial/serial_s5p.c @@ -117,7 +117,7 @@ static void __maybe_unused s5p_serial_baud(struct s5p_uart *uart, u8 reg_width, writeb(val % 16, &uart->rest.value); } -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD int s5p_serial_setbrg(struct udevice *dev, int baudrate) { struct s5p_serial_plat *plat = dev_get_plat(dev); diff --git a/drivers/serial/serial_zynq.c b/drivers/serial/serial_zynq.c index 55f13c00dd..b74712f3ee 100644 --- a/drivers/serial/serial_zynq.c +++ b/drivers/serial/serial_zynq.c @@ -152,7 +152,7 @@ static int zynq_serial_setbrg(struct udevice *dev, int baudrate) return 0; } -#if !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_XPL_BUILD) static int zynq_serial_setconfig(struct udevice *dev, uint serial_config) { struct zynq_uart_plat *plat = dev_get_plat(dev); diff --git a/drivers/spi/designware_spi.c b/drivers/spi/designware_spi.c index 6bd48b1b37..b520c72790 100644 --- a/drivers/spi/designware_spi.c +++ b/drivers/spi/designware_spi.c @@ -219,7 +219,7 @@ static int dw_spi_dwc_init(struct udevice *bus, struct dw_spi_priv *priv) static int request_gpio_cs(struct udevice *bus) { -#if CONFIG_IS_ENABLED(DM_GPIO) && !defined(CONFIG_SPL_BUILD) +#if CONFIG_IS_ENABLED(DM_GPIO) && !defined(CONFIG_XPL_BUILD) struct dw_spi_priv *priv = dev_get_priv(bus); int ret; @@ -482,7 +482,7 @@ static int poll_transfer(struct dw_spi_priv *priv) */ __weak void external_cs_manage(struct udevice *dev, bool on) { -#if CONFIG_IS_ENABLED(DM_GPIO) && !defined(CONFIG_SPL_BUILD) +#if CONFIG_IS_ENABLED(DM_GPIO) && !defined(CONFIG_XPL_BUILD) struct dw_spi_priv *priv = dev_get_priv(dev->parent); if (!dm_gpio_is_valid(&priv->cs_gpio)) diff --git a/drivers/spi/rockchip_sfc.c b/drivers/spi/rockchip_sfc.c index 596c22aa01..43aefc20c9 100644 --- a/drivers/spi/rockchip_sfc.c +++ b/drivers/spi/rockchip_sfc.c @@ -229,7 +229,7 @@ static int rockchip_sfc_ofdata_to_platdata(struct udevice *bus) sfc->regbase = dev_read_addr_ptr(bus); sfc->use_dma = !dev_read_bool(bus, "rockchip,sfc-no-dma"); - if (IS_ENABLED(CONFIG_SPL_BUILD) && sfc->use_dma) + if (IS_ENABLED(CONFIG_XPL_BUILD) && sfc->use_dma) sfc->use_dma = !dev_read_bool(bus, "u-boot,spl-sfc-no-dma"); #if CONFIG_IS_ENABLED(CLK) diff --git a/drivers/sysreset/sysreset_ast.c b/drivers/sysreset/sysreset_ast.c index ef09440bbe..4e15ebd53c 100644 --- a/drivers/sysreset/sysreset_ast.c +++ b/drivers/sysreset/sysreset_ast.c @@ -33,7 +33,7 @@ static int ast_sysreset_request(struct udevice *dev, enum sysreset_t type) return -EPROTONOSUPPORT; } -#if !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_XPL_BUILD) ret = wdt_expire_now(wdt, reset_mode); if (ret) { debug("Sysreset failed: %d", ret); diff --git a/drivers/usb/cdns3/core.c b/drivers/usb/cdns3/core.c index cbe06a9e7b..4cfd38ec24 100644 --- a/drivers/usb/cdns3/core.c +++ b/drivers/usb/cdns3/core.c @@ -149,7 +149,7 @@ static int cdns3_core_init_role(struct cdns3 *cdns) dr_mode = best_dr_mode; -#if defined(CONFIG_SPL_USB_HOST) || !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_SPL_USB_HOST) || !defined(CONFIG_XPL_BUILD) if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_HOST) { ret = cdns3_host_init(cdns); if (ret) { @@ -412,7 +412,7 @@ int cdns3_bind(struct udevice *parent) switch (dr_mode) { #if defined(CONFIG_SPL_USB_HOST) || \ - (!defined(CONFIG_SPL_BUILD) && defined(CONFIG_USB_HOST)) + (!defined(CONFIG_XPL_BUILD) && defined(CONFIG_USB_HOST)) case USB_DR_MODE_HOST: debug("%s: dr_mode: HOST\n", __func__); driver = "cdns-usb3-host"; @@ -498,7 +498,7 @@ int dm_usb_gadget_handle_interrupts(struct udevice *dev) #endif #if defined(CONFIG_SPL_USB_HOST) || \ - (!defined(CONFIG_SPL_BUILD) && defined(CONFIG_USB_HOST)) + (!defined(CONFIG_XPL_BUILD) && defined(CONFIG_USB_HOST)) static int cdns3_host_probe(struct udevice *dev) { struct cdns3_host_priv *priv = dev_get_priv(dev); diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index 6abcce0d9c..3158487cba 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -7,7 +7,7 @@ obj-$(CONFIG_$(SPL_TPL_)USB_GADGET) += epautoconf.o config.o usbstring.o obj-$(CONFIG_$(SPL_TPL_)USB_ETHER) += epautoconf.o config.o usbstring.o ether.o obj-$(CONFIG_$(SPL_TPL_)USB_ETH_RNDIS) += rndis.o -ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-$(CONFIG_SPL_USB_GADGET) += g_dnl.o obj-$(CONFIG_SPL_DFU) += f_dfu.o obj-$(CONFIG_SPL_USB_SDP_SUPPORT) += f_sdp.o @@ -21,7 +21,7 @@ obj-$(CONFIG_USB_GADGET_BCM_UDC_OTG_PHY) += bcm_udc_otg_phy.o obj-$(CONFIG_USB_GADGET_DWC2_OTG) += dwc2_udc_otg.o obj-$(CONFIG_USB_GADGET_DWC2_OTG_PHY) += dwc2_udc_otg_phy.o obj-$(CONFIG_USB_GADGET_MAX3420) += max3420_udc.o -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-$(CONFIG_USB_GADGET_DOWNLOAD) += g_dnl.o obj-$(CONFIG_USB_FUNCTION_THOR) += f_thor.o obj-$(CONFIG_DFU_OVER_USB) += f_dfu.o diff --git a/drivers/usb/gadget/f_sdp.c b/drivers/usb/gadget/f_sdp.c index 5d62eb475d..36934b1bcf 100644 --- a/drivers/usb/gadget/f_sdp.c +++ b/drivers/usb/gadget/f_sdp.c @@ -411,7 +411,7 @@ static void sdp_rx_data_complete(struct usb_ep *ep, struct usb_request *req) return; } -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD env_set_hex("filesize", sdp->dnl_bytes); #endif printf("done\n"); @@ -736,7 +736,7 @@ static u32 sdp_jump_imxheader(void *address) return 0; } -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD static ulong sdp_load_read(struct spl_load_info *load, ulong sector, ulong count, void *buf) { @@ -825,7 +825,7 @@ static int sdp_handle_in_ep(struct spl_image_info *spl_image, /* If imx header fails, try some U-Boot specific headers */ if (status) { -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD if (IS_ENABLED(CONFIG_SPL_LOAD_IMX_CONTAINER)) sdp_func->jmp_address = (u32)search_container_header((ulong)sdp_func->jmp_address, sdp_func->dnl_bytes); else if (IS_ENABLED(CONFIG_SPL_LOAD_FIT)) @@ -907,7 +907,7 @@ static void sdp_handle_out_ep(void) } } -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD int sdp_handle(struct udevice *udc) #else int spl_sdp_handle(struct udevice *udc, struct spl_image_info *spl_image, @@ -928,7 +928,7 @@ int spl_sdp_handle(struct udevice *udc, struct spl_image_info *spl_image, schedule(); dm_usb_gadget_handle_interrupts(udc); -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD flag = sdp_handle_in_ep(spl_image, bootdev); #else flag = sdp_handle_in_ep(NULL, NULL); diff --git a/drivers/usb/mtu3/mtu3_plat.c b/drivers/usb/mtu3/mtu3_plat.c index f8e14eabfb..26fee141f6 100644 --- a/drivers/usb/mtu3/mtu3_plat.c +++ b/drivers/usb/mtu3/mtu3_plat.c @@ -266,7 +266,7 @@ U_BOOT_DRIVER(mtu3_peripheral) = { #endif #if defined(CONFIG_SPL_USB_HOST) || \ - (!defined(CONFIG_SPL_BUILD) && defined(CONFIG_USB_HOST)) + (!defined(CONFIG_XPL_BUILD) && defined(CONFIG_USB_HOST)) static int mtu3_host_probe(struct udevice *dev) { struct ssusb_mtk *ssusb = dev_to_ssusb(dev->parent); @@ -334,7 +334,7 @@ static int mtu3_glue_bind(struct udevice *parent) #endif #if defined(CONFIG_SPL_USB_HOST) || \ - (!defined(CONFIG_SPL_BUILD) && defined(CONFIG_USB_HOST)) + (!defined(CONFIG_XPL_BUILD) && defined(CONFIG_USB_HOST)) case USB_DR_MODE_HOST: dev_dbg(parent, "%s: dr_mode: host\n", __func__); driver = "mtu3-host";