From: Tom Rini Date: Sat, 15 May 2021 01:34:12 +0000 (-0400) Subject: ppc: Remove sbc8349 board X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=3588e200608058676fb2f9e93efc5ef44bce91f3;p=u-boot.git ppc: Remove sbc8349 board This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Paul Gortmaker Signed-off-by: Tom Rini --- diff --git a/arch/powerpc/cpu/mpc83xx/Kconfig b/arch/powerpc/cpu/mpc83xx/Kconfig index ff85834c46..e0bdfc4b97 100644 --- a/arch/powerpc/cpu/mpc83xx/Kconfig +++ b/arch/powerpc/cpu/mpc83xx/Kconfig @@ -12,10 +12,6 @@ config TARGET_MPC8308_P1M bool "Support mpc8308_p1m" select ARCH_MPC8308 -config TARGET_SBC8349 - bool "Support sbc8349" - select ARCH_MPC8349 - config TARGET_VE8313 bool "Support ve8313" select ARCH_MPC8313 @@ -312,7 +308,6 @@ source "board/freescale/mpc837xerdb/Kconfig" source "board/ids/ids8313/Kconfig" source "board/keymile/Kconfig" source "board/mpc8308_p1m/Kconfig" -source "board/sbc8349/Kconfig" source "board/tqc/tqm834x/Kconfig" source "board/ve8313/Kconfig" source "board/gdsys/mpc8308/Kconfig" diff --git a/board/sbc8349/Kconfig b/board/sbc8349/Kconfig deleted file mode 100644 index 129d6b92ec..0000000000 --- a/board/sbc8349/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -if TARGET_SBC8349 - -config SYS_BOARD - default "sbc8349" - -config SYS_CONFIG_NAME - default "sbc8349" - -endif diff --git a/board/sbc8349/MAINTAINERS b/board/sbc8349/MAINTAINERS deleted file mode 100644 index af95c1dd0d..0000000000 --- a/board/sbc8349/MAINTAINERS +++ /dev/null @@ -1,8 +0,0 @@ -SBC8349 BOARD -M: Paul Gortmaker -S: Maintained -F: board/sbc8349/ -F: include/configs/sbc8349.h -F: configs/sbc8349_defconfig -F: configs/sbc8349_PCI_33_defconfig -F: configs/sbc8349_PCI_66_defconfig diff --git a/board/sbc8349/Makefile b/board/sbc8349/Makefile deleted file mode 100644 index c469174085..0000000000 --- a/board/sbc8349/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright (c) 2006 Wind River Systems, Inc. - -obj-y += sbc8349.o -obj-$(CONFIG_PCI) += pci.o diff --git a/board/sbc8349/README b/board/sbc8349/README deleted file mode 100644 index 3c142e0407..0000000000 --- a/board/sbc8349/README +++ /dev/null @@ -1,127 +0,0 @@ - - - U-Boot for Wind River SBC834x Boards - ==================================== - - -The Wind River SBC834x board is a 6U form factor (not CPCI) reference -design that uses the MPC8347E or MPC8349E processor. U-Boot support -for this board is heavily based on the existing U-Boot support for -Freescale MPC8349 reference boards. - -Support has been primarily tested on the SBC8349 version of the board, -although earlier versions were also tested on the SBC8347. The primary -difference in the two is the level of PCI functionality. - - http://www.windriver.com/products/OCD/SBC8347E_49E/ - - -Flash Details: -============== - -The flash type is intel 28F640Jx (4096x16) [one device]. Base address -is 0xFF80_0000 which is also where the Hardware Reset Configuration -Word (HRCW) is stored. Caution should be used to not reset the -board without having a valid HRCW in place (i.e. erased flash) as -then a Wind River ICE will be required to restore the HRCW and flash -image. - - -Restoring a corrupted or missing flash image: -============================================= - -Note that U-Boot versions up to and including 2009.06 had essentially -two copies of U-Boot in flash; one at the very beginning, which set -the HRCW, and one at the very end, which was the image that was run. -As of this point in time, the two have been combined into just one -at the beginning of flash, which provides both the HRCW, and the image -that is executed. This frees up the remainder of flash for other uses. -Use of the U-Boot command "fli" will indicate what parts are in use. -Details for storing U-Boot to flash using a Wind River ICE can be found -on page 19 of the board manual (request ERG-00328-001). The following -is a summary of that information: - - - Connect ICE and establish connection to it from WorkBench/OCD. - - Ensure you have background mode (BKM) in the OCD terminal window. - - Select the appropriate flash type (listed above) - - Prepare a U-Boot image by using the Wind River Convert utility; - by using "Convert and Add file" on the ELF file from your build. - Convert from FF80_0000 to FFFF_FFFF (or to FF83_FFFF if you are - trying to preserve your old environment settings and user flash). - - Set the start address of the erase/flash process to FF80_0000 - - Set the target RAM required to 64kB. - - Select sectors for erasing (see note on environment below) - - Select Erase and Reprogram. - -Note that some versions of the register files used with Workbench -would zero some TSEC registers, which inhibits ethernet operation -by U-Boot when this register file is played to the target. Using -"INN" in the OCD terminal window instead of "IN" before the "GO" -will not play the register file, and allow U-Boot to use the TSEC -interface while executed from the ICE "GO" command. - -Alternatively, you can locate the register file which will be named -WRS_SBC8349_PCT00328001.reg or similar) and "REM" out all the lines -beginning with "SCGA TSEC1" and "SCGA TSEC2". This allows you to -use all the remaining register file content. - -If you wish to preserve your prior U-Boot environment settings, -then convert (and erase to) 0xFF83FFFF instead of 0xFFFFFFFF. -The size for converting (and erasing) must be at least as large -as u-boot.bin. - - -Updating U-Boot with U-Boot: -============================ - -This procedure is very similar to other boards that have U-Boot installed. -Assuming that the network has been configured, and that the new u-boot.bin -has been copied to the TFTP server, the commands are: - - tftp 200000 u-boot.bin - protect off all - erase ff800000 ff83ffff - cp.b 200000 ff800000 40000 - protect on all - -You may wish to do a "md ff800000 20" operation as a prefix and postfix -to the above steps to inspect/compare the HRCW before/after as an extra -safety check before resetting the board upon completion of the reflash. - -PCI: -==== - -There are three configuration choices: - sbc8349_config - sbc8349_PCI_33_config - sbc8349_PCI_66_config - -The 1st does not enable CONFIG_PCI, and assumes that the PCI slot -will be left empty (M66EN high), and so the board will operate with -a base clock of 66MHz. Note that you need both PCI enabled in U-Boot -and linux in order to have functional PCI under linux. The only -reason for choosing to not enable PCI would be if you had a very -early (rev 1.0) CPU with possible PCI issues. - -The second enables PCI support and builds for a 33MHz clock rate. Note -that if a 33MHz 32bit card is inserted in the slot, then the whole board -will clock down to a 33MHz base clock instead of the default 66MHz. This -will change the baud clocks and mess up your serial console output if you -were previously running at 66MHz. If you want to use a 33MHz PCI card, -then you should build a U-Boot with sbc8349_PCI_33_config and store this -to flash prior to powering down the board and inserting the 33MHz PCI -card. - -The third option builds PCI support in, and leaves the clocking at the -default 66MHz. This has been tested with an intel PCI-X e1000 card. -This is also the appropriate choice for people with a recent (non 1.0) -CPU who currently have the PCI slot physically empty, but intend to -possibly add a PCI-X card at a later date. - - => pci - Scanning PCI devices on bus 0 - BusDevFun VendorId DeviceId Device Class Sub-Class - _____________________________________________________________ - 00.00.00 0x1957 0x0080 Processor 0x20 - 00.11.00 0x8086 0x1026 Network controller 0x00 - => diff --git a/board/sbc8349/pci.c b/board/sbc8349/pci.c deleted file mode 100644 index 26c4f24e4f..0000000000 --- a/board/sbc8349/pci.c +++ /dev/null @@ -1,70 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * pci.c -- WindRiver SBC8349 PCI board support. - * Copyright (c) 2006 Wind River Systems, Inc. - * Copyright (C) 2006-2009 Freescale Semiconductor, Inc. - * - * Based on MPC8349 PCI support but w/o PIB related code. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -static struct pci_region pci1_regions[] = { - { - bus_start: CONFIG_SYS_PCI1_MEM_BASE, - phys_start: CONFIG_SYS_PCI1_MEM_PHYS, - size: CONFIG_SYS_PCI1_MEM_SIZE, - flags: PCI_REGION_MEM | PCI_REGION_PREFETCH - }, - { - bus_start: CONFIG_SYS_PCI1_IO_BASE, - phys_start: CONFIG_SYS_PCI1_IO_PHYS, - size: CONFIG_SYS_PCI1_IO_SIZE, - flags: PCI_REGION_IO - }, - { - bus_start: CONFIG_SYS_PCI1_MMIO_BASE, - phys_start: CONFIG_SYS_PCI1_MMIO_PHYS, - size: CONFIG_SYS_PCI1_MMIO_SIZE, - flags: PCI_REGION_MEM - }, -}; - -/* - * pci_init_board() - * - * NOTICE: PCI2 is not supported. There is only one - * physical PCI slot on the board. - * - */ -void -pci_init_board(void) -{ - volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR; - volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk; - volatile law83xx_t *pci_law = immr->sysconf.pcilaw; - struct pci_region *reg[] = { pci1_regions }; - - /* Enable all 8 PCI_CLK_OUTPUTS */ - clk->occr = 0xff000000; - udelay(2000); - - /* Configure PCI Local Access Windows */ - pci_law[0].bar = CONFIG_SYS_PCI1_MEM_PHYS & LAWBAR_BAR; - pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_1G; - - pci_law[1].bar = CONFIG_SYS_PCI1_IO_PHYS & LAWBAR_BAR; - pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_4M; - - udelay(2000); - - mpc83xx_pci_init(1, reg); -} diff --git a/board/sbc8349/sbc8349.c b/board/sbc8349/sbc8349.c deleted file mode 100644 index b440a0b17e..0000000000 --- a/board/sbc8349/sbc8349.c +++ /dev/null @@ -1,243 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * sbc8349.c -- WindRiver SBC8349 board support. - * Copyright (c) 2006-2007 Wind River Systems, Inc. - * - * Paul Gortmaker - * Based on board/mpc8349emds/mpc8349emds.c (and previous 834x releases.) - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#if defined(CONFIG_OF_LIBFDT) -#include -#endif -#include - -DECLARE_GLOBAL_DATA_PTR; - -int fixed_sdram(void); -void sdram_init(void); - -#if defined(CONFIG_DDR_ECC) && defined(CONFIG_MPC83xx) -void ddr_enable_ecc(unsigned int dram_size); -#endif - -#ifdef CONFIG_BOARD_EARLY_INIT_F -int board_early_init_f (void) -{ - return 0; -} -#endif - -#define ns2clk(ns) (ns / (1000000000 / CONFIG_8349_CLKIN) + 1) - -int dram_init(void) -{ - volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; - u32 msize = 0; - - if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im) - return -1; - - /* DDR SDRAM - Main SODIMM */ - im->sysconf.ddrlaw[0].bar = CONFIG_SYS_SDRAM_BASE & LAWBAR_BAR; -#if defined(CONFIG_SPD_EEPROM) - msize = spd_sdram(); -#else - msize = fixed_sdram(); -#endif - /* - * Initialize SDRAM if it is on local bus. - */ - sdram_init(); - -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) - /* - * Initialize and enable DDR ECC. - */ - ddr_enable_ecc(msize * 1024 * 1024); -#endif - /* set total bus SDRAM size(bytes) -- DDR */ - gd->ram_size = msize * 1024 * 1024; - - return 0; -} - -#if !defined(CONFIG_SPD_EEPROM) -/************************************************************************* - * fixed sdram init -- doesn't use serial presence detect. - ************************************************************************/ -int fixed_sdram(void) -{ - volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; - u32 msize = CONFIG_SYS_DDR_SIZE; - u32 ddr_size = msize << 20; /* DDR size in bytes */ - u32 ddr_size_log2 = __ilog2(msize); - - im->sysconf.ddrlaw[0].bar = CONFIG_SYS_SDRAM_BASE & 0xfffff000; - im->sysconf.ddrlaw[0].ar = LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE); - -#if (CONFIG_SYS_DDR_SIZE != 256) -#warning Currently any ddr size other than 256 is not supported -#endif - -#if ((CONFIG_SYS_SDRAM_BASE & 0x00FFFFFF) != 0) -#warning Chip select bounds is only configurable in 16MB increments -#endif - im->ddr.csbnds[2].csbnds = - ((CONFIG_SYS_SDRAM_BASE >> CSBNDS_SA_SHIFT) & CSBNDS_SA) | - (((CONFIG_SYS_SDRAM_BASE + ddr_size - 1) >> - CSBNDS_EA_SHIFT) & CSBNDS_EA); - im->ddr.cs_config[2] = CONFIG_SYS_DDR_CS2_CONFIG; - - /* currently we use only one CS, so disable the other banks */ - im->ddr.cs_config[0] = 0; - im->ddr.cs_config[1] = 0; - im->ddr.cs_config[3] = 0; - - im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1; - im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2; - - im->ddr.sdram_cfg = - SDRAM_CFG_SREN -#if defined(CONFIG_DDR_2T_TIMING) - | SDRAM_CFG_2T_EN -#endif - | SDRAM_CFG_SDRAM_TYPE_DDR1; -#if defined (CONFIG_DDR_32BIT) - /* for 32-bit mode burst length is 8 */ - im->ddr.sdram_cfg |= (SDRAM_CFG_32_BE | SDRAM_CFG_8_BE); -#endif - im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE; - - im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL; - udelay(200); - - /* enable DDR controller */ - im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN; - return msize; -} -#endif/*!CONFIG_SYS_SPD_EEPROM*/ - - -int checkboard (void) -{ - puts("Board: Wind River SBC834x\n"); - return 0; -} - -/* - * if board is fitted with SDRAM - */ -#if defined(CONFIG_SYS_BR2_PRELIM) \ - && defined(CONFIG_SYS_OR2_PRELIM) \ - && defined(CONFIG_SYS_LBLAWBAR2_PRELIM) \ - && defined(CONFIG_SYS_LBLAWAR2_PRELIM) -/* - * Initialize SDRAM memory on the Local Bus. - */ - -void sdram_init(void) -{ - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile fsl_lbc_t *lbc = &immap->im_lbc; - uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE; - const u32 lsdmr_common = LSDMR_RFEN | LSDMR_BSMA1516 | LSDMR_RFCR8 | - LSDMR_PRETOACT6 | LSDMR_ACTTORW3 | LSDMR_BL8 | - LSDMR_WRC3 | LSDMR_CL3; - - puts("\n SDRAM on Local Bus: "); - print_size (CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, "\n"); - - /* - * Setup SDRAM Base and Option Registers, already done in cpu_init.c - */ - - /* setup mtrpt, lsrt and lbcr for LB bus */ - lbc->lbcr = 0x00000000; - /* LB refresh timer prescal, 266MHz/32 */ - lbc->mrtpr = 0x20000000; - /* LB sdram refresh timer, about 6us */ - lbc->lsrt = 0x32000000; - asm("sync"); - - /* - * Configure the SDRAM controller Machine Mode Register. - */ - /* 0x40636733; normal operation */ - lbc->lsdmr = lsdmr_common | LSDMR_OP_NORMAL; - - /* 0x68636733; precharge all the banks */ - lbc->lsdmr = lsdmr_common | LSDMR_OP_PCHALL; - asm("sync"); - *sdram_addr = 0xff; - udelay(100); - - /* 0x48636733; auto refresh */ - lbc->lsdmr = lsdmr_common | LSDMR_OP_ARFRSH; - asm("sync"); - /*1 times*/ - *sdram_addr = 0xff; - udelay(100); - /*2 times*/ - *sdram_addr = 0xff; - udelay(100); - /*3 times*/ - *sdram_addr = 0xff; - udelay(100); - /*4 times*/ - *sdram_addr = 0xff; - udelay(100); - /*5 times*/ - *sdram_addr = 0xff; - udelay(100); - /*6 times*/ - *sdram_addr = 0xff; - udelay(100); - /*7 times*/ - *sdram_addr = 0xff; - udelay(100); - /*8 times*/ - *sdram_addr = 0xff; - udelay(100); - - /* 0x58636733; mode register write operation */ - lbc->lsdmr = lsdmr_common | LSDMR_OP_MRW; - asm("sync"); - *sdram_addr = 0xff; - udelay(100); - - /* 0x40636733; normal operation */ - lbc->lsdmr = lsdmr_common | LSDMR_OP_NORMAL; - asm("sync"); - *sdram_addr = 0xff; - udelay(100); -} -#else -void sdram_init(void) -{ - puts(" SDRAM on Local Bus: Disabled in config\n"); -} -#endif - -#if defined(CONFIG_OF_BOARD_SETUP) -int ft_board_setup(void *blob, struct bd_info *bd) -{ - ft_cpu_setup(blob, bd); -#ifdef CONFIG_PCI - ft_pci_setup(blob, bd); -#endif - - return 0; -} -#endif diff --git a/configs/sbc8349_PCI_33_defconfig b/configs/sbc8349_PCI_33_defconfig deleted file mode 100644 index e428933b41..0000000000 --- a/configs/sbc8349_PCI_33_defconfig +++ /dev/null @@ -1,123 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0xFF800000 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_SECT_SIZE=0x20000 -CONFIG_SYS_CLK_FREQ=33000000 -CONFIG_MPC83xx=y -CONFIG_HIGH_BATS=y -CONFIG_TARGET_SBC8349=y -CONFIG_DDR_MC_CLOCK_MODE_1_1=y -CONFIG_SYSTEM_PLL_FACTOR_8_1=y -CONFIG_CORE_PLL_RATIO_2_1=y -CONFIG_PCI_HOST_MODE_ENABLE=y -CONFIG_PCI_64BIT_MODE_ENABLE=y -CONFIG_PCI_INT_ARBITER1_ENABLE=y -CONFIG_BOOT_MEMORY_SPACE_LOW=y -CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y -CONFIG_TSEC1_MODE_GMII=y -CONFIG_TSEC2_MODE_GMII=y -CONFIG_BAT0=y -CONFIG_BAT0_NAME="SDRAM" -CONFIG_BAT0_BASE=0x00000000 -CONFIG_BAT0_LENGTH_256_MBYTES=y -CONFIG_BAT0_ACCESS_RW=y -CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y -CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y -CONFIG_BAT0_USER_MODE_VALID=y -CONFIG_BAT0_SUPERVISOR_MODE_VALID=y -CONFIG_BAT1=y -CONFIG_BAT1_NAME="PCI1_MEM" -CONFIG_BAT1_BASE=0x80000000 -CONFIG_BAT1_LENGTH_256_MBYTES=y -CONFIG_BAT1_ACCESS_RW=y -CONFIG_BAT1_ICACHE_MEMORYCOHERENCE=y -CONFIG_BAT1_DCACHE_MEMORYCOHERENCE=y -CONFIG_BAT1_USER_MODE_VALID=y -CONFIG_BAT1_SUPERVISOR_MODE_VALID=y -CONFIG_BAT2=y -CONFIG_BAT2_NAME="PCI1_MMIO" -CONFIG_BAT2_BASE=0x90000000 -CONFIG_BAT2_LENGTH_256_MBYTES=y -CONFIG_BAT2_ACCESS_RW=y -CONFIG_BAT2_ICACHE_INHIBITED=y -CONFIG_BAT2_ICACHE_GUARDED=y -CONFIG_BAT2_DCACHE_INHIBITED=y -CONFIG_BAT2_DCACHE_GUARDED=y -CONFIG_BAT2_USER_MODE_VALID=y -CONFIG_BAT2_SUPERVISOR_MODE_VALID=y -CONFIG_BAT5=y -CONFIG_BAT5_NAME="IMMR_PCIIO" -CONFIG_BAT5_BASE=0xE0000000 -CONFIG_BAT5_LENGTH_256_MBYTES=y -CONFIG_BAT5_ACCESS_RW=y -CONFIG_BAT5_ICACHE_INHIBITED=y -CONFIG_BAT5_ICACHE_GUARDED=y -CONFIG_BAT5_DCACHE_INHIBITED=y -CONFIG_BAT5_DCACHE_GUARDED=y -CONFIG_BAT5_USER_MODE_VALID=y -CONFIG_BAT5_SUPERVISOR_MODE_VALID=y -CONFIG_BAT6=y -CONFIG_BAT6_NAME="LBC_INITRAM_FLASH" -CONFIG_BAT6_BASE=0xF0000000 -CONFIG_BAT6_LENGTH_256_MBYTES=y -CONFIG_BAT6_ACCESS_RW=y -CONFIG_BAT6_ICACHE_MEMORYCOHERENCE=y -CONFIG_BAT6_ICACHE_GUARDED=y -CONFIG_BAT6_DCACHE_MEMORYCOHERENCE=y -CONFIG_BAT6_DCACHE_GUARDED=y -CONFIG_BAT6_USER_MODE_VALID=y -CONFIG_BAT6_SUPERVISOR_MODE_VALID=y -CONFIG_LBLAW0=y -CONFIG_LBLAW0_BASE=0xFF800000 -CONFIG_LBLAW0_NAME="FLASH" -CONFIG_LBLAW0_LENGTH_8_MBYTES=y -CONFIG_ELBC_BR0_OR0=y -CONFIG_BR0_OR0_NAME="FLASH" -CONFIG_BR0_OR0_BASE=0xFF800000 -CONFIG_BR0_PORTSIZE_16BIT=y -CONFIG_OR0_AM_8_MBYTES=y -CONFIG_OR0_XAM_SET=y -CONFIG_OR0_SCY_15=y -CONFIG_OR0_CSNT_EARLIER=y -CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y -CONFIG_OR0_XACS_EXTENDED=y -CONFIG_OR0_TRLX_RELAXED=y -CONFIG_OR0_EHTR_8_CYCLE=y -CONFIG_OR0_EAD_EXTRA=y -CONFIG_HID0_FINAL_EMCP=y -CONFIG_HID0_FINAL_ICE=y -CONFIG_HID2_HBE=y -CONFIG_LCRR_DBYP_PLL_BYPASSED=y -CONFIG_LCRR_CLKDIV_4=y -CONFIG_PCI_64BIT=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="PCI_33M" -CONFIG_BOOTDELAY=6 -CONFIG_HUSH_PARSER=y -CONFIG_CMD_IMLS=y -CONFIG_CMD_I2C=y -CONFIG_CMD_PCI=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_ENV_OVERWRITE=y -CONFIG_SYS_REDUNDAND_ENVIRONMENT=y -CONFIG_ENV_ADDR=0xFF840000 -CONFIG_ENV_ADDR_REDUND=0xFF860000 -# CONFIG_MMC is not set -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_PHY_ATHEROS=y -CONFIG_PHY_BROADCOM=y -CONFIG_PHY_DAVICOM=y -CONFIG_PHY_LXT=y -CONFIG_PHY_MARVELL=y -CONFIG_PHY_NATSEMI=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_SMSC=y -CONFIG_PHY_VITESSE=y -CONFIG_TSEC_ENET=y -CONFIG_SYS_NS16550=y -CONFIG_OF_LIBFDT=y diff --git a/configs/sbc8349_PCI_66_defconfig b/configs/sbc8349_PCI_66_defconfig deleted file mode 100644 index 4774cd9836..0000000000 --- a/configs/sbc8349_PCI_66_defconfig +++ /dev/null @@ -1,123 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0xFF800000 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_SECT_SIZE=0x20000 -CONFIG_SYS_CLK_FREQ=66000000 -CONFIG_MPC83xx=y -CONFIG_HIGH_BATS=y -CONFIG_TARGET_SBC8349=y -CONFIG_DDR_MC_CLOCK_MODE_1_1=y -CONFIG_SYSTEM_PLL_FACTOR_4_1=y -CONFIG_CORE_PLL_RATIO_2_1=y -CONFIG_PCI_HOST_MODE_ENABLE=y -CONFIG_PCI_64BIT_MODE_ENABLE=y -CONFIG_PCI_INT_ARBITER1_ENABLE=y -CONFIG_BOOT_MEMORY_SPACE_LOW=y -CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y -CONFIG_TSEC1_MODE_GMII=y -CONFIG_TSEC2_MODE_GMII=y -CONFIG_BAT0=y -CONFIG_BAT0_NAME="SDRAM" -CONFIG_BAT0_BASE=0x00000000 -CONFIG_BAT0_LENGTH_256_MBYTES=y -CONFIG_BAT0_ACCESS_RW=y -CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y -CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y -CONFIG_BAT0_USER_MODE_VALID=y -CONFIG_BAT0_SUPERVISOR_MODE_VALID=y -CONFIG_BAT1=y -CONFIG_BAT1_NAME="PCI1_MEM" -CONFIG_BAT1_BASE=0x80000000 -CONFIG_BAT1_LENGTH_256_MBYTES=y -CONFIG_BAT1_ACCESS_RW=y -CONFIG_BAT1_ICACHE_MEMORYCOHERENCE=y -CONFIG_BAT1_DCACHE_MEMORYCOHERENCE=y -CONFIG_BAT1_USER_MODE_VALID=y -CONFIG_BAT1_SUPERVISOR_MODE_VALID=y -CONFIG_BAT2=y -CONFIG_BAT2_NAME="PCI1_MMIO" -CONFIG_BAT2_BASE=0x90000000 -CONFIG_BAT2_LENGTH_256_MBYTES=y -CONFIG_BAT2_ACCESS_RW=y -CONFIG_BAT2_ICACHE_INHIBITED=y -CONFIG_BAT2_ICACHE_GUARDED=y -CONFIG_BAT2_DCACHE_INHIBITED=y -CONFIG_BAT2_DCACHE_GUARDED=y -CONFIG_BAT2_USER_MODE_VALID=y -CONFIG_BAT2_SUPERVISOR_MODE_VALID=y -CONFIG_BAT5=y -CONFIG_BAT5_NAME="IMMR_PCIIO" -CONFIG_BAT5_BASE=0xE0000000 -CONFIG_BAT5_LENGTH_256_MBYTES=y -CONFIG_BAT5_ACCESS_RW=y -CONFIG_BAT5_ICACHE_INHIBITED=y -CONFIG_BAT5_ICACHE_GUARDED=y -CONFIG_BAT5_DCACHE_INHIBITED=y -CONFIG_BAT5_DCACHE_GUARDED=y -CONFIG_BAT5_USER_MODE_VALID=y -CONFIG_BAT5_SUPERVISOR_MODE_VALID=y -CONFIG_BAT6=y -CONFIG_BAT6_NAME="LBC_INITRAM_FLASH" -CONFIG_BAT6_BASE=0xF0000000 -CONFIG_BAT6_LENGTH_256_MBYTES=y -CONFIG_BAT6_ACCESS_RW=y -CONFIG_BAT6_ICACHE_MEMORYCOHERENCE=y -CONFIG_BAT6_ICACHE_GUARDED=y -CONFIG_BAT6_DCACHE_MEMORYCOHERENCE=y -CONFIG_BAT6_DCACHE_GUARDED=y -CONFIG_BAT6_USER_MODE_VALID=y -CONFIG_BAT6_SUPERVISOR_MODE_VALID=y -CONFIG_LBLAW0=y -CONFIG_LBLAW0_BASE=0xFF800000 -CONFIG_LBLAW0_NAME="FLASH" -CONFIG_LBLAW0_LENGTH_8_MBYTES=y -CONFIG_ELBC_BR0_OR0=y -CONFIG_BR0_OR0_NAME="FLASH" -CONFIG_BR0_OR0_BASE=0xFF800000 -CONFIG_BR0_PORTSIZE_16BIT=y -CONFIG_OR0_AM_8_MBYTES=y -CONFIG_OR0_XAM_SET=y -CONFIG_OR0_SCY_15=y -CONFIG_OR0_CSNT_EARLIER=y -CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y -CONFIG_OR0_XACS_EXTENDED=y -CONFIG_OR0_TRLX_RELAXED=y -CONFIG_OR0_EHTR_8_CYCLE=y -CONFIG_OR0_EAD_EXTRA=y -CONFIG_HID0_FINAL_EMCP=y -CONFIG_HID0_FINAL_ICE=y -CONFIG_HID2_HBE=y -CONFIG_LCRR_DBYP_PLL_BYPASSED=y -CONFIG_LCRR_CLKDIV_4=y -CONFIG_PCI_64BIT=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="PCI_66M" -CONFIG_BOOTDELAY=6 -CONFIG_HUSH_PARSER=y -CONFIG_CMD_IMLS=y -CONFIG_CMD_I2C=y -CONFIG_CMD_PCI=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_ENV_OVERWRITE=y -CONFIG_SYS_REDUNDAND_ENVIRONMENT=y -CONFIG_ENV_ADDR=0xFF840000 -CONFIG_ENV_ADDR_REDUND=0xFF860000 -# CONFIG_MMC is not set -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_PHY_ATHEROS=y -CONFIG_PHY_BROADCOM=y -CONFIG_PHY_DAVICOM=y -CONFIG_PHY_LXT=y -CONFIG_PHY_MARVELL=y -CONFIG_PHY_NATSEMI=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_SMSC=y -CONFIG_PHY_VITESSE=y -CONFIG_TSEC_ENET=y -CONFIG_SYS_NS16550=y -CONFIG_OF_LIBFDT=y diff --git a/configs/sbc8349_defconfig b/configs/sbc8349_defconfig deleted file mode 100644 index b69e66b61e..0000000000 --- a/configs/sbc8349_defconfig +++ /dev/null @@ -1,101 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0xFF800000 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_SECT_SIZE=0x20000 -CONFIG_SYS_CLK_FREQ=66000000 -CONFIG_MPC83xx=y -CONFIG_HIGH_BATS=y -CONFIG_TARGET_SBC8349=y -CONFIG_DDR_MC_CLOCK_MODE_1_1=y -CONFIG_SYSTEM_PLL_FACTOR_4_1=y -CONFIG_CORE_PLL_RATIO_2_1=y -CONFIG_PCI_HOST_MODE_ENABLE=y -CONFIG_PCI_INT_ARBITER1_ENABLE=y -CONFIG_PCI_INT_ARBITER2_ENABLE=y -CONFIG_BOOT_MEMORY_SPACE_LOW=y -CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y -CONFIG_TSEC1_MODE_GMII=y -CONFIG_TSEC2_MODE_GMII=y -CONFIG_BAT0=y -CONFIG_BAT0_NAME="SDRAM" -CONFIG_BAT0_BASE=0x00000000 -CONFIG_BAT0_LENGTH_256_MBYTES=y -CONFIG_BAT0_ACCESS_RW=y -CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y -CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y -CONFIG_BAT0_USER_MODE_VALID=y -CONFIG_BAT0_SUPERVISOR_MODE_VALID=y -CONFIG_BAT5=y -CONFIG_BAT5_NAME="IMMR_PCIIO" -CONFIG_BAT5_BASE=0xE0000000 -CONFIG_BAT5_LENGTH_256_MBYTES=y -CONFIG_BAT5_ACCESS_RW=y -CONFIG_BAT5_ICACHE_INHIBITED=y -CONFIG_BAT5_ICACHE_GUARDED=y -CONFIG_BAT5_DCACHE_INHIBITED=y -CONFIG_BAT5_DCACHE_GUARDED=y -CONFIG_BAT5_USER_MODE_VALID=y -CONFIG_BAT5_SUPERVISOR_MODE_VALID=y -CONFIG_BAT6=y -CONFIG_BAT6_NAME="LBC_INITRAM_FLASH" -CONFIG_BAT6_BASE=0xF0000000 -CONFIG_BAT6_LENGTH_256_MBYTES=y -CONFIG_BAT6_ACCESS_RW=y -CONFIG_BAT6_ICACHE_MEMORYCOHERENCE=y -CONFIG_BAT6_ICACHE_GUARDED=y -CONFIG_BAT6_DCACHE_MEMORYCOHERENCE=y -CONFIG_BAT6_DCACHE_GUARDED=y -CONFIG_BAT6_USER_MODE_VALID=y -CONFIG_BAT6_SUPERVISOR_MODE_VALID=y -CONFIG_LBLAW0=y -CONFIG_LBLAW0_BASE=0xFF800000 -CONFIG_LBLAW0_NAME="FLASH" -CONFIG_LBLAW0_LENGTH_8_MBYTES=y -CONFIG_ELBC_BR0_OR0=y -CONFIG_BR0_OR0_NAME="FLASH" -CONFIG_BR0_OR0_BASE=0xFF800000 -CONFIG_BR0_PORTSIZE_16BIT=y -CONFIG_OR0_AM_8_MBYTES=y -CONFIG_OR0_XAM_SET=y -CONFIG_OR0_SCY_15=y -CONFIG_OR0_CSNT_EARLIER=y -CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y -CONFIG_OR0_XACS_EXTENDED=y -CONFIG_OR0_TRLX_RELAXED=y -CONFIG_OR0_EHTR_8_CYCLE=y -CONFIG_OR0_EAD_EXTRA=y -CONFIG_HID0_FINAL_EMCP=y -CONFIG_HID0_FINAL_ICE=y -CONFIG_HID2_HBE=y -CONFIG_LCRR_DBYP_PLL_BYPASSED=y -CONFIG_LCRR_CLKDIV_4=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_BOOTDELAY=6 -CONFIG_HUSH_PARSER=y -CONFIG_CMD_IMLS=y -CONFIG_CMD_I2C=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_ENV_OVERWRITE=y -CONFIG_SYS_REDUNDAND_ENVIRONMENT=y -CONFIG_ENV_ADDR=0xFF840000 -CONFIG_ENV_ADDR_REDUND=0xFF860000 -# CONFIG_MMC is not set -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_PHY_ATHEROS=y -CONFIG_PHY_BROADCOM=y -CONFIG_PHY_DAVICOM=y -CONFIG_PHY_LXT=y -CONFIG_PHY_MARVELL=y -CONFIG_PHY_NATSEMI=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_SMSC=y -CONFIG_PHY_VITESSE=y -CONFIG_TSEC_ENET=y -# CONFIG_PCI is not set -CONFIG_SYS_NS16550=y -CONFIG_OF_LIBFDT=y diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h deleted file mode 100644 index 929579efe1..0000000000 --- a/include/configs/sbc8349.h +++ /dev/null @@ -1,322 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * WindRiver SBC8349 U-Boot configuration file. - * Copyright (c) 2006, 2007 Wind River Systems, Inc. - * - * Paul Gortmaker - * Based on the MPC8349EMDS config. - */ - -/* - * sbc8349 board configuration file. - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - */ -#define CONFIG_E300 1 /* E300 Family */ - -/* Don't enable PCI2 on sbc834x - it doesn't exist physically. */ -#undef CONFIG_MPC83XX_PCI2 /* support for 2nd PCI controller */ - -#undef CONFIG_SYS_DRAM_TEST /* memory test, takes time */ - -/* - * DDR Setup - */ -#undef CONFIG_DDR_ECC /* only for ECC DDR module */ -#undef CONFIG_DDR_ECC_CMD /* use DDR ECC user commands */ -#define CONFIG_SPD_EEPROM /* use SPD EEPROM for DDR setup*/ -#define CONFIG_SYS_83XX_DDR_USES_CS0 /* WRS; Fsl board uses CS2/CS3 */ - -/* - * 32-bit data path mode. - * - * Please note that using this mode for devices with the real density of 64-bit - * effectively reduces the amount of available memory due to the effect of - * wrapping around while translating address to row/columns, for example in the - * 256MB module the upper 128MB get aliased with contents of the lower - * 128MB); normally this define should be used for devices with real 32-bit - * data path. - */ -#undef CONFIG_DDR_32BIT - -#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* DDR is system memory*/ -#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN | \ - DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075) -#define CONFIG_DDR_2T_TIMING - -#if defined(CONFIG_SPD_EEPROM) -/* - * Determine DDR configuration from I2C interface. - */ -#define SPD_EEPROM_ADDRESS 0x52 /* DDR DIMM */ - -#else -/* - * Manually set up DDR parameters - * NB: manual DDR setup untested on sbc834x - */ -#define CONFIG_SYS_DDR_SIZE 256 /* MB */ -#define CONFIG_SYS_DDR_CS2_CONFIG (CSCONFIG_EN \ - | CSCONFIG_ROW_BIT_13 \ - | CSCONFIG_COL_BIT_10) -#define CONFIG_SYS_DDR_TIMING_1 0x36332321 -#define CONFIG_SYS_DDR_TIMING_2 0x00000800 /* P9-45,may need tuning */ -#define CONFIG_SYS_DDR_CONTROL 0xc2000000 /* unbuffered,no DYN_PWR */ -#define CONFIG_SYS_DDR_INTERVAL 0x04060100 /* autocharge,no open page */ - -#if defined(CONFIG_DDR_32BIT) -/* set burst length to 8 for 32-bit data path */ - /* DLL,normal,seq,4/2.5, 8 burst len */ -#define CONFIG_SYS_DDR_MODE 0x00000023 -#else -/* the default burst length is 4 - for 64-bit data path */ - /* DLL,normal,seq,4/2.5, 4 burst len */ -#define CONFIG_SYS_DDR_MODE 0x00000022 -#endif -#endif - -/* - * SDRAM on the Local Bus - */ -#define CONFIG_SYS_LBC_SDRAM_BASE 0xF0000000 /* Localbus SDRAM */ -#define CONFIG_SYS_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */ - -/* - * FLASH on the Local Bus - */ -#define CONFIG_SYS_FLASH_BASE 0xFF800000 /* start of FLASH */ -#define CONFIG_SYS_FLASH_SIZE 8 /* flash size in MB */ - - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 64 /* sectors per device */ - -#undef CONFIG_SYS_FLASH_CHECKSUM -#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ - -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -#define CONFIG_SYS_RAMBOOT -#else -#undef CONFIG_SYS_RAMBOOT -#endif - -#define CONFIG_SYS_INIT_RAM_LOCK 1 - /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 - /* Size of used area in RAM*/ -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 - -#define CONFIG_SYS_GBL_DATA_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ -#define CONFIG_SYS_MALLOC_LEN (256 * 1024) /* Reserved for malloc */ - -#undef CONFIG_SYS_LB_SDRAM /* if board has SDRAM on local bus */ - -/* - * Serial Port - */ -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) - -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} - -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600) - -/* I2C */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_FSL -#define CONFIG_SYS_FSL_I2C_SPEED 400000 -#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 -#define CONFIG_SYS_FSL_I2C2_SPEED 400000 -#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 -#define CONFIG_SYS_I2C_NOPROBES { {0, 0x69}, {1, 0x69} } -/* could also use CONFIG_I2C_MULTI_BUS and CONFIG_SYS_SPD_BUS_NUM... */ - -/* TSEC */ -#define CONFIG_SYS_TSEC1_OFFSET 0x24000 -#define CONFIG_SYS_TSEC1 (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET) -#define CONFIG_SYS_TSEC2_OFFSET 0x25000 -#define CONFIG_SYS_TSEC2 (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC2_OFFSET) - -/* - * General PCI - * Addresses are mapped 1-1. - */ -#define CONFIG_SYS_PCI1_MEM_BASE 0x80000000 -#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE -#define CONFIG_SYS_PCI1_MEM_SIZE 0x10000000 /* 256M */ -#define CONFIG_SYS_PCI1_MMIO_BASE 0x90000000 -#define CONFIG_SYS_PCI1_MMIO_PHYS CONFIG_SYS_PCI1_MMIO_BASE -#define CONFIG_SYS_PCI1_MMIO_SIZE 0x10000000 /* 256M */ -#define CONFIG_SYS_PCI1_IO_BASE 0x00000000 -#define CONFIG_SYS_PCI1_IO_PHYS 0xE2000000 -#define CONFIG_SYS_PCI1_IO_SIZE 0x00100000 /* 1M */ - -#define CONFIG_SYS_PCI2_MEM_BASE 0xA0000000 -#define CONFIG_SYS_PCI2_MEM_PHYS CONFIG_SYS_PCI2_MEM_BASE -#define CONFIG_SYS_PCI2_MEM_SIZE 0x10000000 /* 256M */ -#define CONFIG_SYS_PCI2_MMIO_BASE 0xB0000000 -#define CONFIG_SYS_PCI2_MMIO_PHYS CONFIG_SYS_PCI2_MMIO_BASE -#define CONFIG_SYS_PCI2_MMIO_SIZE 0x10000000 /* 256M */ -#define CONFIG_SYS_PCI2_IO_BASE 0x00000000 -#define CONFIG_SYS_PCI2_IO_PHYS 0xE2100000 -#define CONFIG_SYS_PCI2_IO_SIZE 0x00100000 /* 1M */ - -#if defined(CONFIG_PCI) - - -#if !defined(CONFIG_PCI_PNP) - #define PCI_ENET0_IOADDR 0xFIXME - #define PCI_ENET0_MEMADDR 0xFIXME - #define PCI_IDSEL_NUMBER 0xFIXME -#endif - -#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ -#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */ - -#endif /* CONFIG_PCI */ - -/* - * TSEC configuration - */ - -#if defined(CONFIG_TSEC_ENET) - -#define CONFIG_TSEC1 1 -#define CONFIG_TSEC1_NAME "TSEC0" -#define CONFIG_TSEC2 1 -#define CONFIG_TSEC2_NAME "TSEC1" -#define CONFIG_PHY_BCM5421S 1 -#define TSEC1_PHY_ADDR 0x19 -#define TSEC2_PHY_ADDR 0x1a -#define TSEC1_PHYIDX 0 -#define TSEC2_PHYIDX 0 -#define TSEC1_FLAGS TSEC_GIGABIT -#define TSEC2_FLAGS TSEC_GIGABIT - -/* Options are: TSEC[0-1] */ -#define CONFIG_ETHPRIME "TSEC0" - -#endif /* CONFIG_TSEC_ENET */ - -/* - * Environment - */ -#ifndef CONFIG_SYS_RAMBOOT -/* Address and size of Redundant Environment Sector */ -#endif - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 256 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ - /* Initial Memory map for Linux*/ -#define CONFIG_SYS_BOOTMAPSZ (256 << 20) - -#define CONFIG_SYS_RCWH_PCIHOST 0x80000000 /* PCIHOST */ - -/* System IO Config */ -#define CONFIG_SYS_SICRH 0 -#define CONFIG_SYS_SICRL SICRL_LDP_A - -#ifdef CONFIG_PCI -#define CONFIG_PCI_INDIRECT_BRIDGE -#endif - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ -#endif - -/* - * Environment Configuration - */ - -#if defined(CONFIG_TSEC_ENET) -#define CONFIG_HAS_ETH0 -#define CONFIG_HAS_ETH1 -#endif - -#define CONFIG_HOSTNAME "SBC8349" -#define CONFIG_ROOTPATH "/tftpboot/rootfs" -#define CONFIG_BOOTFILE "uImage" - - /* default location for tftp and bootm */ -#define CONFIG_LOADADDR 800000 - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "hostname=sbc8349\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\ - "flash_nfs=run nfsargs addip addtty;" \ - "bootm ${kernel_addr}\0" \ - "flash_self=run ramargs addip addtty;" \ - "bootm ${kernel_addr} ${ramdisk_addr}\0" \ - "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ - "bootm\0" \ - "load=tftp 100000 /tftpboot/sbc8349/u-boot.bin\0" \ - "update=protect off ff800000 ff83ffff; " \ - "era ff800000 ff83ffff; cp.b 100000 ff800000 ${filesize}\0" \ - "upd=run load update\0" \ - "fdtaddr=780000\0" \ - "fdtfile=sbc8349.dtb\0" \ - "" - -#define CONFIG_NFSBOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:" \ - "$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define CONFIG_RAMBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $ramdiskaddr $ramdiskfile;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" - -#define CONFIG_BOOTCOMMAND "run flash_self" - -#endif /* __CONFIG_H */