From: Yuantian Tang Date: Wed, 10 Apr 2019 08:43:34 +0000 (+0800) Subject: armv8: ls1028ardb: Add support for LS1028ARDB X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=353f36d96e49f3ad34ffc4a16dea7398c6f90f65;p=u-boot.git armv8: ls1028ardb: Add support for LS1028ARDB LS1028A is an ARMv8 implementation. LS1028ARDB is an evaluation platform that supports the LS1028A family SoCs. This patch add basic support of the platform. Signed-off-by: Sudhanshu Gupta Signed-off-by: Rai Harninder Signed-off-by: Rajesh Bhagat Signed-off-by: Bhaskar Upadhaya Signed-off-by: Tang Yuantian Signed-off-by: Prabhakar Kushwaha --- diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 00be3d1721..0c9b035352 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1262,6 +1262,17 @@ config TARGET_LS1012AFRDM development platform that supports the QorIQ LS1012A Layerscape Architecture processor. +config TARGET_LS1028ARDB + bool "Support ls1028ardb" + select ARCH_LS1028A + select ARM64 + select ARMV8_MULTIENTRY + help + Support for Freescale LS1028ARDB platform + The LS1028A Development System (RDB) is a high-performance + development platform that supports the QorIQ LS1028A + Layerscape Architecture processor. + config TARGET_LS1088ARDB bool "Support ls1088ardb" select ARCH_LS1088A @@ -1666,6 +1677,7 @@ source "board/freescale/ls2080a/Kconfig" source "board/freescale/ls2080aqds/Kconfig" source "board/freescale/ls2080ardb/Kconfig" source "board/freescale/ls1088a/Kconfig" +source "board/freescale/ls1028a/Kconfig" source "board/freescale/ls1021aqds/Kconfig" source "board/freescale/ls1043aqds/Kconfig" source "board/freescale/ls1021atwr/Kconfig" diff --git a/arch/arm/cpu/armv8/Kconfig b/arch/arm/cpu/armv8/Kconfig index 7405c3a4a1..54831f7905 100644 --- a/arch/arm/cpu/armv8/Kconfig +++ b/arch/arm/cpu/armv8/Kconfig @@ -104,6 +104,7 @@ config PSCI_RESET !TARGET_LS1012ARDB && !TARGET_LS1012AFRDM && \ !TARGET_LS1012A2G5RDB && !TARGET_LS1012AQDS && \ !TARGET_LS1012AFRWY && \ + !TARGET_LS1028ARDB && \ !TARGET_LS1043ARDB && !TARGET_LS1043AQDS && \ !TARGET_LS1046ARDB && !TARGET_LS1046AQDS && \ !TARGET_LS2081ARDB && !TARGET_LX2160ARDB && \ diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 0ec7bc987d..8855a01438 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -329,6 +329,7 @@ dtb-$(CONFIG_FSL_LSCH3) += fsl-ls2080a-qds.dtb \ fsl-ls2088a-rdb-qspi.dtb \ fsl-ls1088a-rdb.dtb \ fsl-ls1088a-qds.dtb \ + fsl-ls1028a-rdb.dtb \ fsl-lx2160a-rdb.dtb \ fsl-lx2160a-qds.dtb dtb-$(CONFIG_FSL_LSCH2) += fsl-ls1043a-qds-duart.dtb \ diff --git a/arch/arm/dts/fsl-ls1028a-rdb.dts b/arch/arm/dts/fsl-ls1028a-rdb.dts new file mode 100644 index 0000000000..932cfa2275 --- /dev/null +++ b/arch/arm/dts/fsl-ls1028a-rdb.dts @@ -0,0 +1,88 @@ +// SPDX-License-Identifier: GPL-2.0+ OR X11 +/* + * NXP ls1028ARDB device tree source + * + * Copyright 2019 NXP + * + */ + +/dts-v1/; + +#include "fsl-ls1028a.dtsi" + +/ { + model = "NXP Layerscape 1028a RDB Board"; + compatible = "fsl,ls1028a-rdb", "fsl,ls1028a"; +}; + +&dspi0 { + status = "okay"; +}; + +&dspi1 { + status = "okay"; +}; + +&dspi2 { + status = "okay"; +}; + +&esdhc0 { + status = "okay"; +}; + +&esdhc1 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; +}; + +&i2c7 { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&serial0 { + status = "okay"; +}; + +&serial1 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + +&usb2 { + status = "okay"; +}; diff --git a/board/freescale/ls1028a/Kconfig b/board/freescale/ls1028a/Kconfig new file mode 100644 index 0000000000..bbfd4dd07d --- /dev/null +++ b/board/freescale/ls1028a/Kconfig @@ -0,0 +1,26 @@ +if TARGET_LS1028ARDB + +config SYS_BOARD + default "ls1028a" + +config SYS_VENDOR + default "freescale" + +config SYS_SOC + default "fsl-layerscape" + +config SYS_CONFIG_NAME + default "ls1028ardb" + +config EMMC_BOOT + bool "Support for booting from EMMC" + default n + +config SYS_TEXT_BASE + default 0x96000000 if SD_BOOT || EMMC_BOOT + default 0x82000000 if TFABOOT + default 0x20100000 + +source "board/freescale/common/Kconfig" + +endif diff --git a/board/freescale/ls1028a/MAINTAINERS b/board/freescale/ls1028a/MAINTAINERS new file mode 100644 index 0000000000..135454cfd6 --- /dev/null +++ b/board/freescale/ls1028a/MAINTAINERS @@ -0,0 +1,10 @@ +LS1028ARDB BOARD +M: Sudhanshu Gupta +M: Rai Harninder +M: Rajesh Bhagat +M: Tang Yuantian +S: Maintained +F: board/freescale/ls1028a/ +F: include/configs/ls1028a_common.h +F: include/configs/ls1028ardb.h +F: configs/ls1028ardb_tfa_defconfig diff --git a/board/freescale/ls1028a/Makefile b/board/freescale/ls1028a/Makefile new file mode 100644 index 0000000000..9bc144cbfe --- /dev/null +++ b/board/freescale/ls1028a/Makefile @@ -0,0 +1,8 @@ +# +# Copyright 2019 NXP +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += ls1028a.o +obj-y += ddr.o diff --git a/board/freescale/ls1028a/README b/board/freescale/ls1028a/README new file mode 100644 index 0000000000..94a390c917 --- /dev/null +++ b/board/freescale/ls1028a/README @@ -0,0 +1,79 @@ +Overview +-------- +The LS1028A Reference Design (RDB) is a high-performance computing, +evaluation, and development platform that supports ARM SoC LS1028A and its +derivatives. + +LS1028A SoC Overview +-------------------------------------- +Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc + +RDB Default Switch Settings (1: ON; 0: OFF) +------------------------------------------- +For XSPI NOR boot (default) +SW2: 1111_1000 +SW3: 1111_0000 +SW5: 0011_1001 + +For SD Boot +SW2: 1000_1000 +SW3: 1111_0000 +SW5: 0011_1001 + +For eMMC Boot +SW2: 1001_1000 +SW3: 1111_0000 +SW5: 0011_1001 + +LS1028ARDB board Overview +------------------------- +Processor + Two Arm Cortex- A72 processor cores: + - Based on 64-bit ARMv8 architecture + - Up to 1.3 GHz operation + - Single-threaded cores with 48 KB L1 instruction cache and 32 KB L1 + data cache + - Arranged as a single cluster of two cores sharing a single 1 MB L2 + cache +DDR memory + - Five onboard 1G x8 discrete memory modules (Four data byte lanes + ECC) + - 32-bit data and 4-bit ECC + - One chip select + - Data transfer rates of up to 1.6 GT/s + - Single-bit error correction and double-bit error detection ECC (4-bit + check word across 32-bit data) +High-speed serial ports(SerDes) + - Lane 0: Supports one 1 GbE RJ45 SGMII, connected through the + Qualcomm AR8033 PHY + - Lane 1: Supports four 1.25 GbE RJ45 QSGMII, each connected + through the NXP F104S8A PHY + - Lane 2: Connects to one PCIe M.2 Key-E slot to support PCIe Gen3 + (8 Gbit/s) cards + - Lane 3: Connects to one PCIe M.2 Key-E slot or one SATA M.2 Key-B + slot through a register mux to support either PCIe Gen 3 (8 Gbit/s) or + SATA Gen 3 cards (6 Gbit/s) at a time +eSDHC + - eSDHC1, eSDHC2 +SPI + - Connects to two mikroBUS sockets to support mikro-click modules, + such as Bluetooth 4.0, 2.4 GHz IEEE 802.15.4 radio transceiver, near + field communications (NFC) controller +Octal SPI (XSPI) + - One 256 MB onboard XSPI serial NOR flash memory + - One 512 MB onboard XSPI serial NAND flash memory + - Supports a QSPI emulator for offboard QSPI emulation +I2C + - All system devices are accessed via I2C1, which is multiplexed on + I2C multiplexer PCA9848 to isolate address conflicts and reduce + capacitive load + - I2C1 is used for EEPROMs, RTC, INA220 current-power sensor, + thermal monitor, PCIe/SATA M.2 connectors and mikro-click modules + 1 and 2 +CAN + - The two CAN DB9 ports can support CAN FD fast phase at data rates of + up to 5 Mbit/s +Serial audio interface(SAI) + - Audio codec SGTL5000 provides headphone and audio LINEOUT for + stereo speakers + - IEEE1588 interface to support audio on SAI4 diff --git a/board/freescale/ls1028a/ddr.c b/board/freescale/ls1028a/ddr.c new file mode 100644 index 0000000000..74d3af5c35 --- /dev/null +++ b/board/freescale/ls1028a/ddr.c @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019 NXP + */ + +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +int fsl_initdram(void) +{ + gd->ram_size = tfa_get_dram_size(); + + if (!gd->ram_size) + gd->ram_size = fsl_ddr_sdram_size(); + + return 0; +} diff --git a/board/freescale/ls1028a/ls1028a.c b/board/freescale/ls1028a/ls1028a.c new file mode 100644 index 0000000000..e3666c34b6 --- /dev/null +++ b/board/freescale/ls1028a/ls1028a.c @@ -0,0 +1,193 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019 NXP + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#ifdef CONFIG_FSL_LS_PPA +#include +#endif +#include +#include + +#include +#include +#include "../common/qixis.h" + +DECLARE_GLOBAL_DATA_PTR; + +int board_init(void) +{ +#ifdef CONFIG_ENV_IS_NOWHERE + gd->env_addr = (ulong)&default_environment[0]; +#endif + +#ifdef CONFIG_FSL_LS_PPA + ppa_init(); +#endif + +#ifndef CONFIG_SYS_EARLY_PCI_INIT + pci_init(); +#endif + +#if defined(CONFIG_TARGET_LS1028ARDB) + u8 val = I2C_MUX_CH_DEFAULT; + + i2c_write(I2C_MUX_PCA_ADDR_PRI, 0x0b, 1, &val, 1); +#endif + return 0; +} + +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} + +int board_early_init_f(void) +{ +#ifdef CONFIG_SYS_I2C_EARLY_INIT + i2c_early_init_f(); +#endif + + fsl_lsch3_early_init_f(); + return 0; +} + +void detail_board_ddr_info(void) +{ + puts("\nDDR "); + print_size(gd->bd->bi_dram[0].size + gd->bd->bi_dram[1].size, ""); + print_ddr_info(0); +} + +#ifdef CONFIG_OF_BOARD_SETUP +int ft_board_setup(void *blob, bd_t *bd) +{ + u64 base[CONFIG_NR_DRAM_BANKS]; + u64 size[CONFIG_NR_DRAM_BANKS]; + + ft_cpu_setup(blob, bd); + + /* fixup DT for the two GPP DDR banks */ + base[0] = gd->bd->bi_dram[0].start; + size[0] = gd->bd->bi_dram[0].size; + base[1] = gd->bd->bi_dram[1].start; + size[1] = gd->bd->bi_dram[1].size; + +#ifdef CONFIG_RESV_RAM + /* reduce size if reserved memory is within this bank */ + if (gd->arch.resv_ram >= base[0] && + gd->arch.resv_ram < base[0] + size[0]) + size[0] = gd->arch.resv_ram - base[0]; + else if (gd->arch.resv_ram >= base[1] && + gd->arch.resv_ram < base[1] + size[1]) + size[1] = gd->arch.resv_ram - base[1]; +#endif + + fdt_fixup_memory_banks(blob, base, size, 2); + + return 0; +} +#endif + +#ifdef CONFIG_FSL_QIXIS +int checkboard(void) +{ +#ifdef CONFIG_TFABOOT + enum boot_src src = get_boot_src(); +#endif + u8 sw; + + int clock; + char *board; + char buf[64] = {0}; + static const char *freq[6] = {"100.00", "125.00", "156.25", + "161.13", "322.26", "100.00 SS"}; + + cpu_name(buf); + /* find the board details */ + sw = QIXIS_READ(id); + + switch (sw) { + case 0x46: + board = "QDS"; + break; + case 0x47: + board = "RDB"; + break; + case 0x49: + board = "HSSI"; + break; + default: + board = "unknown"; + break; + } + + sw = QIXIS_READ(arch); + printf("Board: %s-%s, Version: %c, boot from ", + buf, board, (sw & 0xf) + 'A' - 1); + + sw = QIXIS_READ(brdcfg[0]); + sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT; + +#ifdef CONFIG_TFABOOT + if (src == BOOT_SOURCE_SD_MMC) { + puts("SD\n"); + } else if (src == BOOT_SOURCE_SD_MMC2) { + puts("eMMC\n"); + } else { +#endif +#ifdef CONFIG_SD_BOOT + puts("SD\n"); +#elif defined(CONFIG_EMMC_BOOT) + puts("eMMC\n"); +#else + switch (sw) { + case 0: + case 4: + printf("NOR\n"); + break; + case 1: + printf("NAND\n"); + break; + default: + printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH); + break; + } +#endif +#ifdef CONFIG_TFABOOT + } +#endif + + printf("FPGA: v%d (%s)\n", QIXIS_READ(scver), board); + puts("SERDES1 Reference : "); + + sw = QIXIS_READ(brdcfg[2]); +#ifdef CONFIG_TARGET_LS1028ARDB + clock = (sw >> 6) & 3; +#else + clock = (sw >> 4) & 0xf; +#endif + + printf("Clock1 = %sMHz ", freq[clock]); +#ifdef CONFIG_TARGET_LS1028ARDB + clock = (sw >> 4) & 3; +#else + clock = sw & 0xf; +#endif + printf("Clock2 = %sMHz\n", freq[clock]); + + return 0; +} +#endif diff --git a/configs/ls1028ardb_tfa_defconfig b/configs/ls1028ardb_tfa_defconfig new file mode 100644 index 0000000000..dd27f657be --- /dev/null +++ b/configs/ls1028ardb_tfa_defconfig @@ -0,0 +1,61 @@ +CONFIG_ARM=y +CONFIG_TARGET_LS1028ARDB=y +CONFIG_SYS_FSL_SDHC_CLK_DIV=1 +CONFIG_TFABOOT=y +CONFIG_NR_DRAM_BANKS=2 +CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y +CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y +CONFIG_AHCI=y +CONFIG_DISTRO_DEFAULTS=y +# CONFIG_SYS_MALLOC_F is not set +CONFIG_FIT_VERBOSE=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256 video=1920x1080-32@60 cma=256M" +CONFIG_CMD_GREPENV=y +CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y +CONFIG_CMD_SF=y +CONFIG_CMD_USB=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_CACHE=y +CONFIG_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1028a-rdb" +CONFIG_ENV_IS_IN_MMC=y +CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_NETCONSOLE=y +CONFIG_DM=y +CONFIG_SCSI_AHCI=y +CONFIG_SATA_CEVA=y +CONFIG_FSL_CAAM=y +CONFIG_DM_MMC=y +CONFIG_DM_SPI_FLASH=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set +CONFIG_PHYLIB=y +CONFIG_PHY_ATHEROS=y +CONFIG_DM_ETH=y +CONFIG_PHY_GIGE=y +CONFIG_E1000=y +CONFIG_PCI=y +CONFIG_DM_PCI=y +CONFIG_DM_PCI_COMPAT=y +CONFIG_PCIE_LAYERSCAPE=y +CONFIG_SCSI=y +CONFIG_DM_SCSI=y +CONFIG_SYS_NS16550=y +CONFIG_SPI=y +CONFIG_DM_SPI=y +CONFIG_FSL_DSPI=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/include/configs/ls1028a_common.h b/include/configs/ls1028a_common.h new file mode 100644 index 0000000000..0db86396e9 --- /dev/null +++ b/include/configs/ls1028a_common.h @@ -0,0 +1,200 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2019 NXP + */ + +#ifndef __L1028A_COMMON_H +#define __L1028A_COMMON_H + +#define CONFIG_REMAKE_ELF +#define CONFIG_FSL_LAYERSCAPE +#define CONFIG_MP + +#include +#include +#include + +/* Link Definitions */ +#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE + +#define CONFIG_SKIP_LOWLEVEL_INIT + +#define CONFIG_VERY_BIG_RAM +#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL +#define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE +#define CONFIG_SYS_DDR_BLOCK2_BASE 0x2080000000ULL +#define CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS 1 + +#define CONFIG_CMD_MEMTEST +#define CONFIG_SYS_MEMTEST_START 0x80000000 +#define CONFIG_SYS_MEMTEST_END 0x9fffffff + +/* + * SMP Definitinos + */ +#define CPU_RELEASE_ADDR secondary_boot_func + +/* Generic Timer Definitions */ +#define COUNTER_FREQUENCY 25000000 /* 25MHz */ + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2048 * 1024) + +/* I2C */ +#define CONFIG_SYS_I2C + +/* Serial Port */ +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0) / 2) + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000) + +/* Physical Memory Map */ +#define CONFIG_CHIP_SELECTS_PER_CTRL 4 + +#define CONFIG_HWCONFIG +#define HWCONFIG_BUFFER_SIZE 128 + +/* Allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +#define BOOT_TARGET_DEVICES(func) \ + func(MMC, mmc, 0) \ + func(USB, usb, 0) +#include + +/* Initial environment variables */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "board=ls1028ardb\0" \ + "hwconfig=fsl_ddr:bank_intlv=auto\0" \ + "ramdisk_addr=0x800000\0" \ + "ramdisk_size=0x2000000\0" \ + "fdt_high=0xffffffffffffffff\0" \ + "initrd_high=0xffffffffffffffff\0" \ + "fdt_addr=0x00f00000\0" \ + "kernel_addr=0x01000000\0" \ + "scriptaddr=0x80000000\0" \ + "scripthdraddr=0x80080000\0" \ + "fdtheader_addr_r=0x80100000\0" \ + "kernelheader_addr_r=0x80200000\0" \ + "load_addr=0xa0000000\0" \ + "kernel_addr_r=0x81000000\0" \ + "fdt_addr_r=0x90000000\0" \ + "ramdisk_addr_r=0xa0000000\0" \ + "kernel_start=0x1000000\0" \ + "kernelheader_start=0x800000\0" \ + "kernel_load=0xa0000000\0" \ + "kernel_size=0x2800000\0" \ + "kernelheader_size=0x40000\0" \ + "kernel_addr_sd=0x8000\0" \ + "kernel_size_sd=0x14000\0" \ + "kernelhdr_addr_sd=0x4000\0" \ + "kernelhdr_size_sd=0x10\0" \ + "console=ttyS0,115200\0" \ + "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ + BOOTENV \ + "boot_scripts=ls1028ardb_boot.scr\0" \ + "boot_script_hdr=hdr_ls1028ardb_bs.out\0" \ + "scan_dev_for_boot_part=" \ + "part list ${devtype} ${devnum} devplist; " \ + "env exists devplist || setenv devplist 1; " \ + "for distro_bootpart in ${devplist}; do " \ + "if fstype ${devtype} " \ + "${devnum}:${distro_bootpart} " \ + "bootfstype; then " \ + "run scan_dev_for_boot; " \ + "fi; " \ + "done\0" \ + "scan_dev_for_boot=" \ + "echo Scanning ${devtype} " \ + "${devnum}:${distro_bootpart}...; " \ + "for prefix in ${boot_prefixes}; do " \ + "run scan_dev_for_scripts; " \ + "done;" \ + "\0" \ + "boot_a_script=" \ + "load ${devtype} ${devnum}:${distro_bootpart} " \ + "${scriptaddr} ${prefix}${script}; " \ + "env exists secureboot && load ${devtype} " \ + "${devnum}:${distro_bootpart} " \ + "${scripthdraddr} ${prefix}${boot_script_hdr} " \ + "&& esbc_validate ${scripthdraddr};" \ + "source ${scriptaddr}\0" \ + "sd_bootcmd=echo Trying load from SD ..;" \ + "mmcinfo; mmc read $load_addr " \ + "$kernel_addr_sd $kernel_size_sd && " \ + "env exists secureboot && mmc read $kernelheader_addr_r " \ + "$kernelhdr_addr_sd $kernelhdr_size_sd " \ + " && esbc_validate ${kernelheader_addr_r};" \ + "bootm $load_addr#$board\0" \ + "emmc_bootcmd=echo Trying load from EMMC ..;" \ + "mmcinfo; mmc dev 1; mmc read $load_addr " \ + "$kernel_addr_sd $kernel_size_sd && " \ + "env exists secureboot && mmc read $kernelheader_addr_r " \ + "$kernelhdr_addr_sd $kernelhdr_size_sd " \ + " && esbc_validate ${kernelheader_addr_r};" \ + "bootm $load_addr#$board\0" + +#undef CONFIG_BOOTCOMMAND + +#define SD_BOOTCOMMAND \ + "run distro_bootcmd;run sd_bootcmd; " \ + "env exists secureboot && esbc_halt;" + +/* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot args buffer */ + +#ifndef CONFIG_CMDLINE_EDITING +#define CONFIG_CMDLINE_EDITING 1 +#endif + +#define CONFIG_SYS_MAXARGS 64 /* max command args */ + +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ + +/* MMC */ +#ifdef CONFIG_MMC +#define CONFIG_FSL_ESDHC +#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 +#endif + +#define CONFIG_SYS_MMC_ENV_DEV 0 +#define OCRAM_NONSECURE_SIZE 0x00010000 +#define CONFIG_ENV_OFFSET 0x500000 /* 5MB */ +#define CONFIG_SYS_FSL_QSPI_BASE 0x20000000 +#define CONFIG_ENV_ADDR CONFIG_SYS_FSL_QSPI_BASE + CONFIG_ENV_OFFSET +#define CONFIG_ENV_SIZE 0x2000 /* 8KB */ +#define CONFIG_ENV_SECT_SIZE 0x40000 + +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE + +/* MMC */ +#ifdef CONFIG_MMC +#define CONFIG_FSL_ESDHC +#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 +#endif + +/* I2C bus multiplexer */ +#define I2C_MUX_PCA_ADDR_PRI 0x77 /* Primary Mux*/ +#define I2C_MUX_CH_DEFAULT 0x8 + +/* EEPROM */ +#define CONFIG_ID_EEPROM +#define CONFIG_SYS_I2C_EEPROM_NXID +#define CONFIG_SYS_EEPROM_BUS_NUM 0 +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 + +#endif /* __L1028A_COMMON_H */ diff --git a/include/configs/ls1028ardb.h b/include/configs/ls1028ardb.h new file mode 100644 index 0000000000..10791be824 --- /dev/null +++ b/include/configs/ls1028ardb.h @@ -0,0 +1,77 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2019 NXP + */ + +#ifndef __LS1028A_RDB_H +#define __LS1028A_RDB_H + +#include "ls1028a_common.h" + +#define CONFIG_SYS_CLK_FREQ 100000000 +#define CONFIG_DDR_CLK_FREQ 100000000 +#define COUNTER_FREQUENCY_REAL (CONFIG_SYS_CLK_FREQ / 4) + +#define CONFIG_SYS_RTC_BUS_NUM 0 + +/* Store environment at top of flash */ +#define CONFIG_ENV_SIZE 0x2000 + +#define CONFIG_DIMM_SLOTS_PER_CTLR 1 + +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE + +#define CONFIG_QIXIS_I2C_ACCESS +#define CONFIG_SYS_I2C_EARLY_INIT + +/* + * QIXIS Definitions + */ +#define CONFIG_FSL_QIXIS + +#ifdef CONFIG_FSL_QIXIS +#define QIXIS_BASE 0x7fb00000 +#define QIXIS_BASE_PHYS QIXIS_BASE +#define CONFIG_SYS_I2C_FPGA_ADDR 0x66 +#define QIXIS_LBMAP_SWITCH 2 +#define QIXIS_LBMAP_MASK 0xe0 +#define QIXIS_LBMAP_SHIFT 0x5 +#define QIXIS_LBMAP_DFLTBANK 0x00 +#define QIXIS_LBMAP_ALTBANK 0x00 +#define QIXIS_LBMAP_SD 0x00 +#define QIXIS_LBMAP_EMMC 0x00 +#define QIXIS_LBMAP_QSPI 0x00 +#define QIXIS_RCW_SRC_SD 0xf8 +#define QIXIS_RCW_SRC_EMMC 0xf9 +#define QIXIS_RCW_SRC_QSPI 0xff +#define QIXIS_RST_CTL_RESET 0x31 +#define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x10 +#define QIXIS_RCFG_CTL_RECONFIG_START 0x11 +#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 +#define QIXIS_RST_FORCE_MEM 0x01 + +#define CONFIG_SYS_FPGA_CSPR_EXT (0x0) +#define CONFIG_SYS_FPGA_CSPR (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) | \ + CSPR_PORT_SIZE_8 | \ + CSPR_MSEL_GPCM | \ + CSPR_V) +#define CONFIG_SYS_FPGA_CSOR (CSOR_NOR_ADM_SHIFT(4) | \ + CSOR_NOR_NOR_MODE_AVD_NOR | \ + CSOR_NOR_TRHZ_80) +#endif + +/* SATA */ +#ifndef CONFIG_CMD_EXT2 +#define CONFIG_CMD_EXT2 +#endif +#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 +#define CONFIG_SYS_SCSI_MAX_LUN 1 +#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ + CONFIG_SYS_SCSI_MAX_LUN) +#define SCSI_VEND_ID 0x1b4b +#define SCSI_DEV_ID 0x9170 +#define CONFIG_SCSI_DEV_LIST {SCSI_VEND_ID, SCSI_DEV_ID} +#define CONFIG_SCSI_AHCI_PLAT +#define CONFIG_SYS_SATA1 AHCI_BASE_ADDR1 + +#endif /* __LS1028A_RDB_H */