From: Masahiro Yamada Date: Thu, 14 Mar 2019 05:58:35 +0000 (+0900) Subject: mips: add missing dtb-y to arch/mips/dts/Makefile X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=344db3f;p=u-boot.git mips: add missing dtb-y to arch/mips/dts/Makefile Since commit 27cb7300ffda ("Ensure device tree DTS is compiled"), build succeeds irrespective of the correctness of Makefile. In fact, you can compile any defconfig without adding any entry in arch/*/dts/Makefile. I am going to revert that commit, so device tree must be explicitly listed in Makefile. Signed-off-by: Masahiro Yamada Reviewed-by: Daniel Schwierzeck --- diff --git a/arch/mips/dts/Makefile b/arch/mips/dts/Makefile index b94b582837..665d3cc8c1 100644 --- a/arch/mips/dts/Makefile +++ b/arch/mips/dts/Makefile @@ -1,5 +1,8 @@ # SPDX-License-Identifier: GPL-2.0+ +dtb-$(CONFIG_ARCH_MT7620) += \ + gardena-smart-gateway-mt7688.dtb \ + linkit-smart-7688.dtb dtb-$(CONFIG_TARGET_AP121) += ap121.dtb dtb-$(CONFIG_TARGET_AP143) += ap143.dtb dtb-$(CONFIG_TARGET_BOSTON) += img,boston.dtb @@ -17,6 +20,8 @@ dtb-$(CONFIG_BOARD_NETGEAR_DGND3700V2) += netgear,dgnd3700v2.dtb dtb-$(CONFIG_BOARD_SAGEM_FAST1704) += sagem,f@st1704.dtb dtb-$(CONFIG_BOARD_TPLINK_WDR4300) += tplink_wdr4300.dtb dtb-$(CONFIG_TARGET_JZ4780_CI20) += ci20.dtb +dtb-$(CONFIG_SOC_BMIPS_BCM6358) += sfr,nb4-ser.dtb +dtb-$(CONFIG_SOC_BMIPS_BCM6838) += brcm,bcm968380gerg.dtb dtb-$(CONFIG_SOC_LUTON) += luton_pcb090.dtb luton_pcb091.dtb dtb-$(CONFIG_SOC_OCELOT) += ocelot_pcb120.dtb ocelot_pcb123.dtb dtb-$(CONFIG_SOC_JR2) += jr2_pcb110.dtb jr2_pcb111.dtb serval2_pcb112.dtb