From: Felix Radensky Date: Tue, 19 Jan 2010 19:19:06 +0000 (+0200) Subject: ppc4xx: Allow setting a single SPD EEPROM address for DDR2 DIMMs X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=33c8c664239f6665b228145d7e5adfa238a300bc;p=u-boot.git ppc4xx: Allow setting a single SPD EEPROM address for DDR2 DIMMs On platforms where SPD EEPROM and another EEPROM have adjacent I2C addresses SPD_EEPROM_ADDRESS should be defined as a single element array, otherwise DDR2 setup code would fail with the following error: ERROR: Unknown DIMM detected in slot 1 However, fixing SPD_EEPROM_ADDRESS would result in another error: ERROR: DIMM's DDR1 and DDR2 type can not be mixed. This happens because initdram() routine does not explicitly initialize dimm_populated array. This patch fixes the problem. Signed-off-by: Felix Radensky Signed-off-by: Stefan Roese --- diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c index f8aa14aadb..593a286919 100644 --- a/cpu/ppc4xx/44x_spd_ddr2.c +++ b/cpu/ppc4xx/44x_spd_ddr2.c @@ -426,7 +426,7 @@ phys_size_t initdram(int board_type) unsigned char spd0[MAX_SPD_BYTES]; unsigned char spd1[MAX_SPD_BYTES]; unsigned char *dimm_spd[MAXDIMMS]; - unsigned long dimm_populated[MAXDIMMS]; + unsigned long dimm_populated[MAXDIMMS] = {SDRAM_NONE, SDRAM_NONE}; unsigned long num_dimm_banks; /* on board dimm banks */ unsigned long val; ddr_cas_id_t selected_cas = DDR_CAS_5; /* preset to silence compiler */