From: Michal Simek Date: Fri, 19 Dec 2008 12:25:55 +0000 (+0100) Subject: microblaze: Change microblaze-generic config file X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=330e55459bc9983341da6c1d5c7fe00a664436fe;p=u-boot.git microblaze: Change microblaze-generic config file Signed-off-by: Michal Simek --- diff --git a/board/xilinx/microblaze-generic/xparameters.h b/board/xilinx/microblaze-generic/xparameters.h index d805061c0d..fae03bf71b 100644 --- a/board/xilinx/microblaze-generic/xparameters.h +++ b/board/xilinx/microblaze-generic/xparameters.h @@ -25,6 +25,8 @@ * Version: Xilinx EDK 8.2.02 EDK_Im_Sp2.4 */ +#define XILINX_BOARD_NAME microblaze-generic + /* System Clock Frequency */ #define XILINX_CLOCK_FREQ 100000000 diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h index ed4bf6d359..867f885136 100644 --- a/include/configs/microblaze-generic.h +++ b/include/configs/microblaze-generic.h @@ -32,24 +32,26 @@ /* uart */ #ifdef XILINX_UARTLITE_BASEADDR -#define CONFIG_XILINX_UARTLITE -#define CONFIG_SERIAL_BASE XILINX_UARTLITE_BASEADDR -#define CONFIG_BAUDRATE XILINX_UARTLITE_BAUDRATE -#define CONFIG_SYS_BAUDRATE_TABLE { CONFIG_BAUDRATE } + #define CONFIG_XILINX_UARTLITE + #define CONFIG_SERIAL_BASE XILINX_UARTLITE_BASEADDR + #define CONFIG_BAUDRATE XILINX_UARTLITE_BAUDRATE + #define CONFIG_SYS_BAUDRATE_TABLE { CONFIG_BAUDRATE } + #define CONSOLE_ARG "console=console=ttyUL0,115200\0" #elif XILINX_UART16550_BASEADDR -#define CONFIG_SYS_NS16550 1 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE -4 -#define CONFIG_CONS_INDEX 1 -#define CONFIG_SYS_NS16550_COM1 (XILINX_UART16550_BASEADDR + 0x1000 + 0x3) -#define CONFIG_SYS_NS16550_CLK XILINX_UART16550_CLOCK_HZ -#define CONFIG_BAUDRATE 115200 - -/* The following table includes the supported baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} + #define CONFIG_SYS_NS16550 1 + #define CONFIG_SYS_NS16550_SERIAL + #define CONFIG_SYS_NS16550_REG_SIZE -4 + #define CONFIG_CONS_INDEX 1 + #define CONFIG_SYS_NS16550_COM1 (XILINX_UART16550_BASEADDR + 0x1000 + 0x3) + #define CONFIG_SYS_NS16550_CLK XILINX_UART16550_CLOCK_HZ + #define CONFIG_BAUDRATE 115200 + + /* The following table includes the supported baudrates */ + #define CONFIG_SYS_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} + #define CONSOLE_ARG "console=console=ttyS0,115200\0" #else -#error Undefined uart + #error Undefined uart #endif /* setting reset address */ @@ -57,44 +59,44 @@ /* ethernet */ #ifdef XILINX_EMAC_BASEADDR -#define CONFIG_XILINX_EMAC 1 -#define CONFIG_SYS_ENET -#else -#ifdef XILINX_EMACLITE_BASEADDR -#define CONFIG_XILINX_EMACLITE 1 -#define CONFIG_SYS_ENET -#endif + #define CONFIG_XILINX_EMAC 1 + #define CONFIG_SYS_ENET +#elif XILINX_EMACLITE_BASEADDR + #define CONFIG_XILINX_EMACLITE 1 + #define CONFIG_SYS_ENET +#elif XILINX_LLTEMAC_BASEADDR + #define CONFIG_XILINX_LL_TEMAC 1 + #define CONFIG_SYS_ENET #endif + #undef ET_DEBUG /* gpio */ #ifdef XILINX_GPIO_BASEADDR -#define CONFIG_SYS_GPIO_0 1 -#define CONFIG_SYS_GPIO_0_ADDR XILINX_GPIO_BASEADDR + #define CONFIG_SYS_GPIO_0 1 + #define CONFIG_SYS_GPIO_0_ADDR XILINX_GPIO_BASEADDR #endif /* interrupt controller */ #ifdef XILINX_INTC_BASEADDR -#define CONFIG_SYS_INTC_0 1 -#define CONFIG_SYS_INTC_0_ADDR XILINX_INTC_BASEADDR -#define CONFIG_SYS_INTC_0_NUM XILINX_INTC_NUM_INTR_INPUTS + #define CONFIG_SYS_INTC_0 1 + #define CONFIG_SYS_INTC_0_ADDR XILINX_INTC_BASEADDR + #define CONFIG_SYS_INTC_0_NUM XILINX_INTC_NUM_INTR_INPUTS #endif /* timer */ #ifdef XILINX_TIMER_BASEADDR -#if (XILINX_TIMER_IRQ != -1) -#define CONFIG_SYS_TIMER_0 1 -#define CONFIG_SYS_TIMER_0_ADDR XILINX_TIMER_BASEADDR -#define CONFIG_SYS_TIMER_0_IRQ XILINX_TIMER_IRQ -#define FREQUENCE XILINX_CLOCK_FREQ -#define CONFIG_SYS_TIMER_0_PRELOAD ( FREQUENCE/1000 ) -#endif -#else -#ifdef XILINX_CLOCK_FREQ -#define CONFIG_XILINX_CLOCK_FREQ XILINX_CLOCK_FREQ + #if (XILINX_TIMER_IRQ != -1) + #define CONFIG_SYS_TIMER_0 1 + #define CONFIG_SYS_TIMER_0_ADDR XILINX_TIMER_BASEADDR + #define CONFIG_SYS_TIMER_0_IRQ XILINX_TIMER_IRQ + #define FREQUENCE XILINX_CLOCK_FREQ + #define CONFIG_SYS_TIMER_0_PRELOAD ( FREQUENCE/1000 ) + #endif +#elif XILINX_CLOCK_FREQ + #define CONFIG_XILINX_CLOCK_FREQ XILINX_CLOCK_FREQ #else -#error BAD CLOCK FREQ -#endif + #error BAD CLOCK FREQ #endif /* FSL */ /* #define CONFIG_SYS_FSL_2 */ @@ -159,7 +161,7 @@ #define CONFIG_FLASH_CFI_DRIVER 1 #define CONFIG_SYS_FLASH_EMPTY_INFO 1 /* ?empty sector */ #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ - #define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ + #define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ #define CONFIG_SYS_FLASH_PROTECTION /* hardware flash protection */ #ifdef RAMENV @@ -169,9 +171,9 @@ #else /* !RAMENV */ #define CONFIG_ENV_IS_IN_FLASH 1 - #define CONFIG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */ + #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */ #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE)) - #define CONFIG_ENV_SIZE 0x40000 + #define CONFIG_ENV_SIZE 0x20000 #endif /* !RAMBOOT */ #else /* !FLASH */ /* ENV in RAM */ @@ -209,6 +211,7 @@ #define CONFIG_CMD_CACHE #define CONFIG_CMD_IRQ #define CONFIG_CMD_MFSL +#define CONFIG_CMD_ECHO #ifndef CONFIG_SYS_ENET #undef CONFIG_CMD_NET @@ -232,7 +235,9 @@ #define CONFIG_CMD_SAVES #endif #else + #undef CONFIG_CMD_IMLS #undef CONFIG_CMD_FLASH + #undef CONFIG_CMD_JFFS2 #endif #if defined(CONFIG_CMD_JFFS2) @@ -252,11 +257,11 @@ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) /* print buffer size */ #define CONFIG_SYS_MAXARGS 15 /* max number of command args */ #define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_LOAD_ADDR 0x12000000 /* default load address */ +#define CONFIG_SYS_LOAD_ADDR XILINX_RAM_START /* default load address */ -#define CONFIG_BOOTDELAY 30 +#define CONFIG_BOOTDELAY -1 /* -1 disables auto-boot */ #define CONFIG_BOOTARGS "root=romfs" -#define CONFIG_HOSTNAME "ml401" +#define CONFIG_HOSTNAME XILINX_BOARD_NAME #define CONFIG_BOOTCOMMAND "base 0;tftp 11000000 image.img;bootm" #define CONFIG_IPADDR 192.168.0.3 #define CONFIG_SERVERIP 192.168.0.5 @@ -267,7 +272,7 @@ #define CONFIG_SYS_USR_EXCEP /* user exception */ #define CONFIG_SYS_HZ 1000 -#define CONFIG_PREBOOT "echo U-BOOT for ML401;setenv preboot;echo" +#define CONFIG_PREBOOT "echo U-BOOT for $(hostname);setenv preboot;echo" #define CONFIG_EXTRA_ENV_SETTINGS "unlock=yes\0" /* hardware flash protection */\ "nor0=ml401-0\0"\