From: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
Date: Thu, 26 Sep 2013 08:54:58 +0000 (+0530)
Subject: sf: probe: Simply the BAR configuration logic
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=32ebd1a7d51818a327f2e23570d6bfc542c68e12;p=u-boot.git

sf: probe: Simply the BAR configuration logic

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
---

diff --git a/drivers/mtd/spi/spi_flash_internal.h b/drivers/mtd/spi/spi_flash_internal.h
index ce34ce0c34..61de2378fd 100644
--- a/drivers/mtd/spi/spi_flash_internal.h
+++ b/drivers/mtd/spi/spi_flash_internal.h
@@ -31,11 +31,6 @@
 
 #define SPI_FLASH_16MB_BOUN		0x1000000
 
-/* Manufacture ID's */
-#define SPI_FLASH_SPANSION_IDCODE0	0x01
-#define SPI_FLASH_STMICRO_IDCODE0	0x20
-#define SPI_FLASH_WINBOND_IDCODE0	0xef
-
 #ifdef CONFIG_SPI_FLASH_BAR
 /* Bank addr access commands */
 # define CMD_BANKADDR_BRWR		0x17
@@ -102,9 +97,6 @@ int spi_flash_cmd_write_status(struct spi_flash *flash, u8 sr);
 #ifdef CONFIG_SPI_FLASH_BAR
 /* Program the bank address register */
 int spi_flash_cmd_bankaddr_write(struct spi_flash *flash, u8 bank_sel);
-
-/* Configure the BAR - discover the bank cmds */
-int spi_flash_bank_config(struct spi_flash *flash, u8 idcode0);
 #endif
 
 /*
diff --git a/drivers/mtd/spi/spi_flash_probe.c b/drivers/mtd/spi/spi_flash_probe.c
index 8ea69158e7..cc30ad1a8c 100644
--- a/drivers/mtd/spi/spi_flash_probe.c
+++ b/drivers/mtd/spi/spi_flash_probe.c
@@ -221,54 +221,36 @@ struct spi_flash *spi_flash_validate_ids(struct spi_slave *spi, u8 *idcode)
 		flash->poll_cmd = CMD_FLAG_STATUS;
 #endif
 
-	/* Flash powers up read-only, so clear BP# bits */
-#if defined(CONFIG_SPI_FLASH_ATMEL) || \
-	defined(CONFIG_SPI_FLASH_MACRONIX) || \
-	defined(CONFIG_SPI_FLASH_SST)
-		spi_flash_cmd_write_status(flash, 0);
-#endif
-
-	return flash;
-}
-
 #ifdef CONFIG_SPI_FLASH_BAR
-int spi_flash_bank_config(struct spi_flash *flash, u8 idcode0)
-{
-	u8 cmd;
+	/* Configure the BAR - discover bank cmds and read current bank  */
 	u8 curr_bank = 0;
-
-	/* discover bank cmds */
-	switch (idcode0) {
-	case SPI_FLASH_SPANSION_IDCODE0:
-		flash->bank_read_cmd = CMD_BANKADDR_BRRD;
-		flash->bank_write_cmd = CMD_BANKADDR_BRWR;
-		break;
-	case SPI_FLASH_STMICRO_IDCODE0:
-	case SPI_FLASH_WINBOND_IDCODE0:
-		flash->bank_read_cmd = CMD_EXTNADDR_RDEAR;
-		flash->bank_write_cmd = CMD_EXTNADDR_WREAR;
-		break;
-	default:
-		printf("SF: Unsupported bank commands %02x\n", idcode0);
-		return -1;
-	}
-
-	/* read the bank reg - on which bank the flash is in currently */
-	cmd = flash->bank_read_cmd;
 	if (flash->size > SPI_FLASH_16MB_BOUN) {
-		if (spi_flash_read_common(flash, &cmd, 1, &curr_bank, 1)) {
+		flash->bank_read_cmd = (idcode[0] == 0x01) ?
+					CMD_BANKADDR_BRRD : CMD_EXTNADDR_RDEAR;
+		flash->bank_write_cmd = (idcode[0] == 0x01) ?
+					CMD_BANKADDR_BRWR : CMD_EXTNADDR_WREAR;
+
+		if (spi_flash_read_common(flash, &flash->bank_read_cmd, 1,
+					  &curr_bank, 1)) {
 			debug("SF: fail to read bank addr register\n");
-			return -1;
+			return NULL;
 		}
 		flash->bank_curr = curr_bank;
 	} else {
 		flash->bank_curr = curr_bank;
 	}
+#endif
 
-	return 0;
-}
+	/* Flash powers up read-only, so clear BP# bits */
+#if defined(CONFIG_SPI_FLASH_ATMEL) || \
+	defined(CONFIG_SPI_FLASH_MACRONIX) || \
+	defined(CONFIG_SPI_FLASH_SST)
+		spi_flash_cmd_write_status(flash, 0);
 #endif
 
+	return flash;
+}
+
 #ifdef CONFIG_OF_CONTROL
 int spi_flash_decode_fdt(const void *blob, struct spi_flash *flash)
 {
@@ -302,7 +284,7 @@ struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
 {
 	struct spi_slave *spi;
 	struct spi_flash *flash = NULL;
-	u8 idcode[5], *idp;
+	u8 idcode[5];
 	int ret;
 
 	/* Setup spi_slave */
@@ -332,18 +314,10 @@ struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
 #endif
 
 	/* Validate ID's from flash dev table */
-	idp = idcode;
-	flash = spi_flash_validate_ids(spi, idp);
+	flash = spi_flash_validate_ids(spi, idcode);
 	if (!flash)
 		goto err_read_id;
 
-#ifdef CONFIG_SPI_FLASH_BAR
-	/* Configure the BAR - discover bank cmds and read current bank  */
-	ret = spi_flash_bank_config(flash, *idp);
-	if (ret < 0)
-		goto err_read_id;
-#endif
-
 #ifdef CONFIG_OF_CONTROL
 	if (spi_flash_decode_fdt(gd->fdt_blob, flash)) {
 		debug("SF: FDT decode error\n");