From: Vladimir Zapolskiy <vz@mleia.com>
Date: Tue, 11 Aug 2015 16:57:09 +0000 (+0300)
Subject: lpc32xx: move common SLC NAND defines to arch/config.h
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=327f0d23c8a3c5cdc6076cf8fb1b0deb86221260;p=u-boot.git

lpc32xx: move common SLC NAND defines to arch/config.h

A number of LPC32xx SLC NAND defines is dictated by controller
hardware limits and OOB layout is defined by operating system, the
definitions are common for all users. Since those macro are used
in out of NAND SLC driver code (simple NAND SPL framework), they can
not be placed into the driver, therefore move them from board config
files to arch/config.h

The change also adds OOB layout details specific to small page NAND
devices taken from Linux kernel.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Tested-by: Sylvain Lemieux <slemieux@tycoint.com>
---

diff --git a/arch/arm/include/asm/arch-lpc32xx/config.h b/arch/arm/include/asm/arch-lpc32xx/config.h
index d57bc4877e..d161ad213a 100644
--- a/arch/arm/include/asm/arch-lpc32xx/config.h
+++ b/arch/arm/include/asm/arch-lpc32xx/config.h
@@ -55,6 +55,35 @@
 /* Ethernet */
 #define LPC32XX_ETH_BASE ETHERNET_BASE
 
+/* NAND */
+#if defined(CONFIG_NAND_LPC32XX_SLC)
+#define NAND_LARGE_BLOCK_PAGE_SIZE	0x800
+#define NAND_SMALL_BLOCK_PAGE_SIZE	0x200
+
+#if !defined(CONFIG_SYS_NAND_PAGE_SIZE)
+#define CONFIG_SYS_NAND_PAGE_SIZE	NAND_LARGE_BLOCK_PAGE_SIZE
+#endif
+
+#if (CONFIG_SYS_NAND_PAGE_SIZE == NAND_LARGE_BLOCK_PAGE_SIZE)
+#define CONFIG_SYS_NAND_OOBSIZE		64
+#define CONFIG_SYS_NAND_ECCPOS		{ 40, 41, 42, 43, 44, 45, 46, 47, \
+					  48, 49, 50, 51, 52, 53, 54, 55, \
+					  56, 57, 58, 59, 60, 61, 62, 63, }
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
+#elif (CONFIG_SYS_NAND_PAGE_SIZE == NAND_SMALL_BLOCK_PAGE_SIZE)
+#define CONFIG_SYS_NAND_OOBSIZE		16
+#define CONFIG_SYS_NAND_ECCPOS		{ 10, 11, 12, 13, 14, 15, }
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS	0
+#else
+#error "CONFIG_SYS_NAND_PAGE_SIZE set to an invalid value"
+#endif
+
+#define CONFIG_SYS_NAND_ECCSIZE		0x100
+#define CONFIG_SYS_NAND_ECCBYTES	3
+#define CONFIG_SYS_NAND_PAGE_COUNT	(CONFIG_SYS_NAND_BLOCK_SIZE / \
+						CONFIG_SYS_NAND_PAGE_SIZE)
+#endif	/* CONFIG_NAND_LPC32XX_SLC */
+
 /* NOR Flash */
 #if defined(CONFIG_SYS_FLASH_CFI)
 #define CONFIG_FLASH_CFI_DRIVER
diff --git a/include/configs/devkit3250.h b/include/configs/devkit3250.h
index cc6a53e675..d3b7620af1 100644
--- a/include/configs/devkit3250.h
+++ b/include/configs/devkit3250.h
@@ -111,7 +111,10 @@
 #define CONFIG_LPC32XX_NAND_SLC_RHOLD		200000000
 #define CONFIG_LPC32XX_NAND_SLC_RSETUP		50000000
 
+#define CONFIG_SYS_NAND_BLOCK_SIZE		0x20000
+#define CONFIG_SYS_NAND_PAGE_SIZE		NAND_LARGE_BLOCK_PAGE_SIZE
 #define CONFIG_SYS_NAND_USE_FLASH_BBT
+
 #define CONFIG_CMD_NAND
 
 /*
@@ -199,17 +202,6 @@
 #define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_DRIVERS
 
-#define CONFIG_SYS_NAND_BLOCK_SIZE	0x20000
-#define CONFIG_SYS_NAND_PAGE_SIZE	0x800
-#define CONFIG_SYS_NAND_ECCSIZE		0x100
-#define CONFIG_SYS_NAND_OOBSIZE		64
-#define CONFIG_SYS_NAND_ECCPOS		{ 40, 41, 42, 43, 44, 45, 46, 47, \
-					  48, 49, 50, 51, 52, 53, 54, 55, \
-					  56, 57, 58, 59, 60, 61, 62, 63, }
-#define CONFIG_SYS_NAND_ECCBYTES	3
-#define CONFIG_SYS_NAND_PAGE_COUNT	64
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
-
 #define CONFIG_SPL_NAND_ECC
 #define CONFIG_SPL_NAND_SOFTECC