From: Srinath Mannam Date: Thu, 2 Apr 2020 10:38:12 +0000 (+0530) Subject: phy: add support for stingray PAXB PHY controller X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=3151fdd7f4ad0cdb14e3aa35eae9908efa0b572e;p=u-boot.git phy: add support for stingray PAXB PHY controller Add support for stingray PAXB PHY controller driver. This driver supports maximum 8 PAXB phys using pipemux data. Signed-off-by: Srinath Mannam Signed-off-by: Rayagonda Kokatanur Reviewed-by: Stefan Roese --- diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 8da00a259d..d66aa07392 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -84,6 +84,13 @@ config BCM6368_USBH_PHY help Support for the Broadcom MIPS BCM6368 USBH PHY. +config BCM_SR_PCIE_PHY + bool "Broadcom Stingray PCIe PHY driver" + depends on PHY + help + Enable this to support the Broadcom Stingray PCIe PHY + If unsure, say N. + config PHY_DA8XX_USB tristate "TI DA8xx USB PHY Driver" depends on PHY && ARCH_DAVINCI diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index 009f353baf..8dabefd776 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_BCM6318_USBH_PHY) += bcm6318-usbh-phy.o obj-$(CONFIG_BCM6348_USBH_PHY) += bcm6348-usbh-phy.o obj-$(CONFIG_BCM6358_USBH_PHY) += bcm6358-usbh-phy.o obj-$(CONFIG_BCM6368_USBH_PHY) += bcm6368-usbh-phy.o +obj-$(CONFIG_BCM_SR_PCIE_PHY) += phy-bcm-sr-pcie.o obj-$(CONFIG_PHY_SANDBOX) += sandbox-phy.o obj-$(CONFIG_$(SPL_)PIPE3_PHY) += ti-pipe3-phy.o obj-$(CONFIG_AM654_PHY) += phy-ti-am654.o diff --git a/drivers/phy/phy-bcm-sr-pcie.c b/drivers/phy/phy-bcm-sr-pcie.c new file mode 100644 index 0000000000..36c77c4b63 --- /dev/null +++ b/drivers/phy/phy-bcm-sr-pcie.c @@ -0,0 +1,177 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019 Broadcom + */ + +#include +#include +#include +#include +#include + +/* we have up to 8 PAXB based RC. The 9th one is always PAXC */ +#define SR_NR_PCIE_PHYS 8 + +#define PCIE_PIPEMUX_CFG_OFFSET 0x10c +#define PCIE_PIPEMUX_SELECT_STRAP GENMASK(3, 0) + +#define CDRU_STRAP_DATA_LSW_OFFSET 0x5c +#define PCIE_PIPEMUX_SHIFT 19 +#define PCIE_PIPEMUX_MASK GENMASK(3, 0) + +/** + * struct sr_pcie_phy_core - Stingray PCIe PHY core control + * + * @dev: pointer to device + * @base: base register of PCIe SS + * @cdru: CDRU base address + * @pipemux: pipemuex strap + */ +struct sr_pcie_phy_core { + struct udevice *dev; + void __iomem *base; + void __iomem *cdru; + u32 pipemux; +}; + +/* + * PCIe PIPEMUX lookup table + * + * Each array index represents a PIPEMUX strap setting + * The array element represents a bitmap where a set bit means the PCIe + * core and associated serdes has been enabled as RC and is available for use + */ +static const u8 pipemux_table[] = { + /* PIPEMUX = 0, EP 1x16 */ + 0x00, + /* PIPEMUX = 1, EP 1x8 + RC 1x8, core 7 */ + 0x80, + /* PIPEMUX = 2, EP 4x4 */ + 0x00, + /* PIPEMUX = 3, RC 2x8, cores 0, 7 */ + 0x81, + /* PIPEMUX = 4, RC 4x4, cores 0, 1, 6, 7 */ + 0xc3, + /* PIPEMUX = 5, RC 8x2, all 8 cores */ + 0xff, + /* PIPEMUX = 6, RC 3x4 + 2x2, cores 0, 2, 3, 6, 7 */ + 0xcd, + /* PIPEMUX = 7, RC 1x4 + 6x2, cores 0, 2, 3, 4, 5, 6, 7 */ + 0xfd, + /* PIPEMUX = 8, EP 1x8 + RC 4x2, cores 4, 5, 6, 7 */ + 0xf0, + /* PIPEMUX = 9, EP 1x8 + RC 2x4, cores 6, 7 */ + 0xc0, + /* PIPEMUX = 10, EP 2x4 + RC 2x4, cores 1, 6 */ + 0x42, + /* PIPEMUX = 11, EP 2x4 + RC 4x2, cores 2, 3, 4, 5 */ + 0x3c, + /* PIPEMUX = 12, EP 1x4 + RC 6x2, cores 2, 3, 4, 5, 6, 7 */ + 0xfc, + /* PIPEMUX = 13, RC 2x4 + RC 1x4 + 2x2, cores 2, 3, 6 */ + 0x4c, +}; + +/* + * Return true if the strap setting is valid + */ +static bool pipemux_strap_is_valid(u32 pipemux) +{ + return !!(pipemux < ARRAY_SIZE(pipemux_table)); +} + +/* + * Read the PCIe PIPEMUX from strap + */ +static u32 pipemux_strap_read(struct sr_pcie_phy_core *core) +{ + u32 pipemux; + + /* + * Read PIPEMUX configuration register to determine the pipemux setting + * + * In the case when the value indicates using HW strap, fall back to + * use HW strap + */ + pipemux = readl(core->base + PCIE_PIPEMUX_CFG_OFFSET); + pipemux &= PCIE_PIPEMUX_MASK; + if (pipemux == PCIE_PIPEMUX_SELECT_STRAP) { + pipemux = readl(core->cdru + CDRU_STRAP_DATA_LSW_OFFSET); + pipemux >>= PCIE_PIPEMUX_SHIFT; + pipemux &= PCIE_PIPEMUX_MASK; + } + + return pipemux; +} + +static int sr_pcie_phy_init(struct phy *phy) +{ + struct sr_pcie_phy_core *core = dev_get_priv(phy->dev); + unsigned int core_idx = phy->id; + + debug("%s %lx\n", __func__, phy->id); + /* + * Check whether this PHY is for root complex or not. If yes, return + * zero so the host driver can proceed to enumeration. If not, return + * an error and that will force the host driver to bail out + */ + if (!!((pipemux_table[core->pipemux] >> core_idx) & 0x1)) + return 0; + + return -ENODEV; +} + +static int sr_pcie_phy_xlate(struct phy *phy, struct ofnode_phandle_args *args) +{ + debug("%s %d\n", __func__, args->args[0]); + if (args->args_count && args->args[0] < SR_NR_PCIE_PHYS) + phy->id = args->args[0]; + else + return -ENODEV; + + return 0; +} + +static const struct phy_ops sr_pcie_phy_ops = { + .of_xlate = sr_pcie_phy_xlate, + .init = sr_pcie_phy_init, +}; + +static int sr_pcie_phy_probe(struct udevice *dev) +{ + struct sr_pcie_phy_core *core = dev_get_priv(dev); + + core->dev = dev; + + core->base = (void __iomem *)devfdt_get_addr_name(dev, "reg_base"); + core->cdru = (void __iomem *)devfdt_get_addr_name(dev, "cdru_base"); + debug("ip base %p\n", core->base); + debug("cdru base %p\n", core->cdru); + + /* read the PCIe PIPEMUX strap setting */ + core->pipemux = pipemux_strap_read(core); + if (!pipemux_strap_is_valid(core->pipemux)) { + pr_err("invalid PCIe PIPEMUX strap %u\n", core->pipemux); + return -EIO; + } + debug("%s %#x\n", __func__, core->pipemux); + + pr_info("Stingray PCIe PHY driver initialized\n"); + + return 0; +} + +static const struct udevice_id sr_pcie_phy_match_table[] = { + { .compatible = "brcm,sr-pcie-phy" }, + { } +}; + +U_BOOT_DRIVER(sr_pcie_phy) = { + .name = "sr-pcie-phy", + .id = UCLASS_PHY, + .probe = sr_pcie_phy_probe, + .of_match = sr_pcie_phy_match_table, + .ops = &sr_pcie_phy_ops, + .platdata_auto_alloc_size = sizeof(struct sr_pcie_phy_core), + .priv_auto_alloc_size = sizeof(struct sr_pcie_phy_core), +};