From: Lukasz Majewski <lukma@denx.de>
Date: Wed, 1 Aug 2018 12:48:56 +0000 (+0200)
Subject: ARM: Odroid XU3: Fix autoboot.cmd to use ${mmcbootdev} instead of hardcoded 0
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=30373ef0a1e15415451bf2e0c5cb9bf796023fe1;p=u-boot.git

ARM: Odroid XU3: Fix autoboot.cmd to use ${mmcbootdev} instead of hardcoded 0

This commit adjusts the autoboot.cmd file to use ${mmcbootdev} instead of
hardcoded value 0.

This is necessary to allow booting this board from the SD card.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
---

diff --git a/board/samsung/common/bootscripts/autoboot.cmd b/board/samsung/common/bootscripts/autoboot.cmd
index 1faed8ba0c..11c724c4e0 100644
--- a/board/samsung/common/bootscripts/autoboot.cmd
+++ b/board/samsung/common/bootscripts/autoboot.cmd
@@ -74,15 +74,15 @@ setenv boot_img "
 
 #### Routine: autoboot - choose proper boot path
 setenv autoboot "
-if test -e mmc 0:${mmcbootpart} Image.itb; then
+if test -e mmc ${mmcbootdev}:${mmcbootpart} Image.itb; then
 	echo Found kernel image: Image.itb;
 	run setboot_fit;
 	run boot_img;
-elif test -e mmc 0:${mmcbootpart} zImage; then
+elif test -e mmc ${mmcbootdev}:${mmcbootpart} zImage; then
 	echo Found kernel image: zImage;
 	run setboot_zimg;
 	run boot_img;
-elif test -e mmc 0:${mmcbootpart} uImage; then
+elif test -e mmc ${mmcbootdev}:${mmcbootpart} uImage; then
 	echo Found kernel image: uImage;
 	run setboot_uimg;
 	run boot_img;