From: Jelle van der Waa <jelle@vdwaa.nl>
Date: Mon, 5 Dec 2016 18:47:21 +0000 (+0100)
Subject: sunxi: enable H3 EMAC for the nanopi neo
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=2fc554d3e37c27c5b8d2540d7a571dc53152a301;p=u-boot.git

sunxi: enable H3 EMAC for the nanopi neo

The nanopi already had the CONFIG_SUN8I_EMAC=y enabled in it's defconfig
file, but was missing the &emac the device tree entry.

Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
---

diff --git a/arch/arm/dts/sun8i-h3-nanopi-neo.dts b/arch/arm/dts/sun8i-h3-nanopi-neo.dts
index 3d64cafc1e..096ff0b5a5 100644
--- a/arch/arm/dts/sun8i-h3-nanopi-neo.dts
+++ b/arch/arm/dts/sun8i-h3-nanopi-neo.dts
@@ -123,3 +123,14 @@
 	/* USB VBUS is always on */
 	status = "okay";
 };
+
+&emac {
+	phy = <&phy1>;
+	phy-mode = "mii";
+	allwinner,use-internal-phy;
+	allwinner,leds-active-low;
+	status = "okay";
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};