From: Hannes Petermaier Date: Tue, 3 Feb 2015 12:22:31 +0000 (+0100) Subject: board/BuR/tseries: Change pinmux for GPIO2_28 from GPIO to PWM-Timeroutput X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=2f32ea70c4929c29f9f4386c6e427d80d801ef13;p=u-boot.git board/BuR/tseries: Change pinmux for GPIO2_28 from GPIO to PWM-Timeroutput Signed-off-by: Hannes Petermaier --- diff --git a/board/BuR/tseries/mux.c b/board/BuR/tseries/mux.c index 0ba25ee318..36ee04cf98 100644 --- a/board/BuR/tseries/mux.c +++ b/board/BuR/tseries/mux.c @@ -131,9 +131,9 @@ static struct module_pin_mux gpIOs[] = { {OFFSET(spi0_cs1), (MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE)}, /* TIMER5 (MMC0_DAT3) - TIMER5 (Buzzer) */ {OFFSET(mmc0_dat3), (MODE(3) | PULLUDEN | RXACTIVE)}, - /* TIMER6 (MMC0_DAT2) - PWM_BACK_3V3, later used as MODE3 for PWM */ - {OFFSET(mmc0_dat2), (MODE(7) | PULLUDEN | RXACTIVE)}, - /* GPIO2_27 (MMC0_DAT1) - MII_nNAND */ + /* TIMER6 (MMC0_DAT2) - PWM_BACK_3V3 */ + {OFFSET(mmc0_dat2), (MODE(3) | PULLUDEN | RXACTIVE)}, + /* GPIO2_28 (MMC0_DAT1) - MII_nNAND */ {OFFSET(mmc0_dat1), (MODE(7) | PULLUDEN | RXACTIVE)}, /* GPIO2_29 (MMC0_DAT0) - NAND_1n0 */ {OFFSET(mmc0_dat0), (MODE(7) | PULLUDEN | RXACTIVE)},