From: Christophe Leroy Date: Sat, 28 Jan 2023 12:53:10 +0000 (+0100) Subject: powerpc/mpc8xx: Zero boot_flags arg for calling board_init_f() X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=2eed0c25f613b707a36600496fe0219d235238bb;p=u-boot.git powerpc/mpc8xx: Zero boot_flags arg for calling board_init_f() Copied from e83a7e94532 ("powerpc/mpc83xx: Zero boot_flags arg for calling board_init_f()") The argument boot_flags of board_init_f() is not used at all in the powerpc specific board.c init sequence. Now with the generic init sequence, this boot_flags arg is used by board_init_f(). This patch sets the r3 register that is used to pass the boot_flags argument from the start.S board_init_f() call to 0 prior to the function call to avoid unknown content to end up in gd->flags. Signed-off-by: Christophe Leroy Fixes: 09f3ca3dd53 ("arm, powerpc: select SYS_GENERIC_BOARD") --- diff --git a/arch/powerpc/cpu/mpc8xx/start.S b/arch/powerpc/cpu/mpc8xx/start.S index 1f1107e61d..0aa73fca12 100644 --- a/arch/powerpc/cpu/mpc8xx/start.S +++ b/arch/powerpc/cpu/mpc8xx/start.S @@ -171,6 +171,7 @@ in_flash: lis r3, CONFIG_SYS_IMMR@h bl cpu_init_f /* run low-level CPU init code (from Flash) */ + li r3, 0 /* clear boot_flag for calling board_init_f */ bl board_init_f /* run 1st part of board init code (from Flash) */ /* NOTREACHED - board_init_f() does not return */