From: Patrice Chotard Date: Mon, 22 Apr 2024 15:06:45 +0000 (+0200) Subject: stm32mp: Reserve OPTEE area in EFI memory map X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=2ec88086c98ea196dfd60638c69b1a69e33d9dbb;p=u-boot.git stm32mp: Reserve OPTEE area in EFI memory map Since commit 7b78d6438a2b3 ("efi_loader: Reserve unaccessible memory") memory region above ram_top is tagged in EFI memory map as EFI_BOOT_SERVICES_DATA. In case of STM32MP1/STM32MP13 platforms, above ram_top, there is one reserved-memory region tagged "no-map" dedicated to OP-TEE : _ addr=de000000 size=2000000 for stm32mp157x-dkx and stm32mp135f-dk _ addr=fe000000 size=2000000 for stm32mp157c-ev1 Before booting kernel, EFI memory map is first built, the OPTEE region is tagged as EFI_BOOT_SERVICES_DATA and when reserving LMB, the tag LMB_NONE is used. Then after, the LMB are completed by boot_fdt_add_mem_rsv_regions() which try to add again the same OPTEE region (addr=de000000 size=2000000 in case of stm32mp157x-dkx / stm32mp135f-dk or addr=fe000000 size=2000000 in case for stm2mp157c-ev1) but now with LMB_NOMAP tag which produces the following error message : _ for stm32mp157x-dkx / stm32mp135f-dk : "ERROR: reserving fdt memory region failed (addr=de000000 size=2000000 flags=4)" _ for stm32mp157c-ev1 : "ERROR: reserving fdt memory region failed (addr=fe000000 size=2000000 flags=4)" To avoid this, OPTEE area shouldn't be used by EFI, so we need to mark it as reserved. Signed-off-by: Patrice Chotard Reviewed-by: Patrick Delaunay --- diff --git a/arch/arm/mach-stm32mp/dram_init.c b/arch/arm/mach-stm32mp/dram_init.c index 78b12fcbb6..6024959b97 100644 --- a/arch/arm/mach-stm32mp/dram_init.c +++ b/arch/arm/mach-stm32mp/dram_init.c @@ -6,6 +6,7 @@ #define LOG_CATEGORY LOGC_ARCH #include +#include #include #include #include @@ -74,3 +75,14 @@ phys_addr_t board_get_usable_ram_top(phys_size_t total_size) return reg + size; } + +void efi_add_known_memory(void) +{ + if (IS_ENABLED(CONFIG_EFI_LOADER)) + /* + * Memory over ram_top is reserved to OPTEE. + * Declare to EFI only memory area below ram_top + */ + efi_add_memory_map(gd->ram_base, gd->ram_top - gd->ram_base, + EFI_CONVENTIONAL_MEMORY); +}