From: Sean Anderson Date: Tue, 15 Sep 2020 14:44:49 +0000 (-0400) Subject: nand: atmel: Fix not calling dev_xxx with a device X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=2e8c907aba5ec66e96dc33611072b7876da0e0ff;p=u-boot.git nand: atmel: Fix not calling dev_xxx with a device Use mtd_info to get a device to log with. Signed-off-by: Sean Anderson Reviewed-by: Simon Glass Tested-by: Patrick Delaunay --- diff --git a/drivers/mtd/nand/raw/atmel_nand.c b/drivers/mtd/nand/raw/atmel_nand.c index 5e95901e27..abc432c862 100644 --- a/drivers/mtd/nand/raw/atmel_nand.c +++ b/drivers/mtd/nand/raw/atmel_nand.c @@ -424,7 +424,8 @@ static int pmecc_err_location(struct mtd_info *mtd) } if (!timeout) { - dev_err(host->dev, "atmel_nand : Timeout to calculate PMECC error location\n"); + dev_err(mtd->dev, + "Timeout to calculate PMECC error location\n"); return -1; } @@ -464,7 +465,8 @@ static void pmecc_correct_data(struct mtd_info *mtd, uint8_t *buf, uint8_t *ecc, *(buf + byte_pos) ^= (1 << bit_pos); pos = sector_num * host->pmecc_sector_size + byte_pos; - dev_dbg(host->dev, "Bit flip in data area, byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n", + dev_dbg(mtd->dev, + "Bit flip in data area, byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n", pos, bit_pos, err_byte, *(buf + byte_pos)); } else { /* Bit flip in OOB area */ @@ -474,7 +476,8 @@ static void pmecc_correct_data(struct mtd_info *mtd, uint8_t *buf, uint8_t *ecc, ecc[tmp] ^= (1 << bit_pos); pos = tmp + nand_chip->ecc.layout->eccpos[0]; - dev_dbg(host->dev, "Bit flip in OOB, oob_byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n", + dev_dbg(mtd->dev, + "Bit flip in OOB, oob_byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n", pos, bit_pos, err_byte, ecc[tmp]); } @@ -516,7 +519,7 @@ normal_check: err_nbr = pmecc_err_location(mtd); if (err_nbr == -1) { - dev_err(host->dev, "PMECC: Too many errors\n"); + dev_err(mtd->dev, "PMECC: Too many errors\n"); mtd->ecc_stats.failed++; return -EBADMSG; } else { @@ -560,7 +563,7 @@ static int atmel_nand_pmecc_read_page(struct mtd_info *mtd, } if (!timeout) { - dev_err(host->dev, "atmel_nand : Timeout to read PMECC page\n"); + dev_err(mtd->dev, "Timeout to read PMECC page\n"); return -1; } @@ -600,7 +603,8 @@ static int atmel_nand_pmecc_write_page(struct mtd_info *mtd, } if (!timeout) { - dev_err(host->dev, "atmel_nand : Timeout to read PMECC status, fail to write PMECC in oob\n"); + dev_err(mtd->dev, + "Timeout to read PMECC status, fail to write PMECC in oob\n"); goto out; } @@ -713,7 +717,8 @@ static int pmecc_choose_ecc(struct atmel_nand_host *host, if (*cap == 0 && *sector_size == 0) { /* Non-ONFI compliant */ - dev_info(host->dev, "NAND chip is not ONFI compliant, assume ecc_bits is 2 in 512 bytes\n"); + dev_info(chip->mtd.dev, + "NAND chip is not ONFI compliant, assume ecc_bits is 2 in 512 bytes\n"); *cap = 2; *sector_size = 512; } @@ -835,17 +840,20 @@ static int atmel_pmecc_nand_init_params(struct nand_chip *nand, * from ONFI. */ if (pmecc_choose_ecc(host, nand, &cap, §or_size)) { - dev_err(host->dev, "Required ECC %d bits in %d bytes not supported!\n", + dev_err(mtd->dev, + "Required ECC %d bits in %d bytes not supported!\n", cap, sector_size); return -EINVAL; } if (cap > host->pmecc_corr_cap) - dev_info(host->dev, "WARNING: Using different ecc correct bits(%d bit) from Nand ONFI ECC reqirement (%d bit).\n", - host->pmecc_corr_cap, cap); + dev_info(mtd->dev, + "WARNING: Using different ecc correct bits(%d bit) from Nand ONFI ECC reqirement (%d bit).\n", + host->pmecc_corr_cap, cap); if (sector_size < host->pmecc_sector_size) - dev_info(host->dev, "WARNING: Using different ecc correct sector size (%d bytes) from Nand ONFI ECC reqirement (%d bytes).\n", - host->pmecc_sector_size, sector_size); + dev_info(mtd->dev, + "WARNING: Using different ecc correct sector size (%d bytes) from Nand ONFI ECC reqirement (%d bytes).\n", + host->pmecc_sector_size, sector_size); #else /* CONFIG_SYS_NAND_ONFI_DETECTION */ host->pmecc_corr_cap = CONFIG_PMECC_CAP; host->pmecc_sector_size = CONFIG_PMECC_SECTOR_SIZE; @@ -877,7 +885,7 @@ static int atmel_pmecc_nand_init_params(struct nand_chip *nand, #if defined(NO_GALOIS_TABLE_IN_ROM) pmecc_galois_table = create_lookup_table(host->pmecc_sector_size); if (!pmecc_galois_table) { - dev_err(host->dev, "out of memory\n"); + dev_err(mtd->dev, "out of memory\n"); return -ENOMEM; } @@ -909,13 +917,14 @@ static int atmel_pmecc_nand_init_params(struct nand_chip *nand, host->pmecc_sector_number; if (nand->ecc.bytes > MTD_MAX_ECCPOS_ENTRIES_LARGE) { - dev_err(host->dev, "too large eccpos entries. max support ecc.bytes is %d\n", - MTD_MAX_ECCPOS_ENTRIES_LARGE); + dev_err(mtd->dev, + "too large eccpos entries. max support ecc.bytes is %d\n", + MTD_MAX_ECCPOS_ENTRIES_LARGE); return -EINVAL; } if (nand->ecc.bytes > mtd->oobsize - PMECC_OOB_RESERVED_BYTES) { - dev_err(host->dev, "No room for ECC bytes\n"); + dev_err(mtd->dev, "No room for ECC bytes\n"); return -EINVAL; } pmecc_config_ecc_layout(&atmel_pmecc_oobinfo, @@ -926,7 +935,8 @@ static int atmel_pmecc_nand_init_params(struct nand_chip *nand, case 512: case 1024: /* TODO */ - dev_err(host->dev, "Unsupported page size for PMECC, use Software ECC\n"); + dev_err(mtd->dev, + "Unsupported page size for PMECC, use Software ECC\n"); default: /* page size not handled by HW ECC */ /* switching back to soft ECC */ @@ -940,7 +950,8 @@ static int atmel_pmecc_nand_init_params(struct nand_chip *nand, /* Allocate data for PMECC computation */ if (pmecc_data_alloc(host)) { - dev_err(host->dev, "Cannot allocate memory for PMECC computation!\n"); + dev_err(mtd->dev, + "Cannot allocate memory for PMECC computation!\n"); return -ENOMEM; } @@ -951,7 +962,7 @@ static int atmel_pmecc_nand_init_params(struct nand_chip *nand, /* Check the PMECC ip version */ host->pmecc_version = pmecc_readl(host->pmerrloc, version); - dev_dbg(host->dev, "PMECC IP version is: %x\n", host->pmecc_version); + dev_dbg(mtd->dev, "PMECC IP version is: %x\n", host->pmecc_version); atmel_pmecc_core_init(mtd); @@ -1114,8 +1125,8 @@ static int atmel_nand_correct(struct mtd_info *mtd, u_char *dat, /* it doesn't seems to be a freshly * erased block. * We can't correct so many errors */ - dev_warn(host->dev, "atmel_nand : multiple errors detected." - " Unable to correct.\n"); + dev_warn(mtd->dev, + "multiple errors detected. Unable to correct.\n"); return -EBADMSG; } @@ -1124,15 +1135,14 @@ static int atmel_nand_correct(struct mtd_info *mtd, u_char *dat, /* there's nothing much to do here. * the bit error is on the ECC itself. */ - dev_warn(host->dev, "atmel_nand : one bit error on ECC code." - " Nothing to correct\n"); + dev_warn(mtd->dev, + "one bit error on ECC code. Nothing to correct\n"); return 0; } - dev_warn(host->dev, "atmel_nand : one bit error on data." - " (word offset in the page :" - " 0x%x bit offset : 0x%x)\n", - ecc_word, ecc_bit); + dev_warn(mtd->dev, + "one bit error on data. (word offset in the page : 0x%x bit offset : 0x%x)\n", + ecc_word, ecc_bit); /* correct the error */ if (nand_chip->options & NAND_BUSWIDTH_16) { /* 16 bits words */ @@ -1141,7 +1151,7 @@ static int atmel_nand_correct(struct mtd_info *mtd, u_char *dat, /* 8 bits words */ dat[ecc_word] ^= (1 << ecc_bit); } - dev_warn(host->dev, "atmel_nand : error corrected\n"); + dev_warn(mtd->dev, "error corrected\n"); return 1; } @@ -1511,7 +1521,6 @@ void board_nand_init(void) int i; for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++) if (atmel_nand_chip_init(i, base_addr[i])) - dev_err(host->dev, "atmel_nand: Fail to initialize #%d chip", - i); + log_err("atmel_nand: Fail to initialize #%d chip", i); } #endif /* CONFIG_SPL_BUILD */