From: Tom Rini Date: Wed, 31 Jan 2018 20:34:49 +0000 (-0500) Subject: davinci: Fix omapl138_lcdk builds X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=2e87980580d0;p=u-boot.git davinci: Fix omapl138_lcdk builds The omapl138_lcdk platform is not a DA850 SoC so we need to select SOC_DA8XX and not SOC_DA850, as it was before. It does however point out a bit of a misnomer in how all of these PLL defines are named as they are generic to DA8xx, not DA850 centric. Remove the 'if SOC_DA850' under the defaults as these are simply the defaults. As SOC_DA8XX will select SYS_DA850_DDR_INIT when needed, we do not need it under both SOC options. Fixes: 76e22222d3aa ("Convert CONFIG_SYS_DV_CLKMODE et al to Kconfig") Signed-off-by: Tom Rini --- diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index 7b05b1749a..30752839a3 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -24,7 +24,7 @@ config TARGET_EA20 config TARGET_OMAPL138_LCDK bool "OMAPL138 LCDK" - select SOC_DA850 + select SOC_DA8XX select SUPPORT_SPL config TARGET_CALIMAIN @@ -54,7 +54,6 @@ config SYS_DA850_DDR_INIT config SOC_DA850 bool select SOC_DA8XX - select SYS_DA850_DDR_INIT if SUPPORT_SPL || DA850_LOWLEVEL config SOC_DA8XX bool @@ -68,79 +67,79 @@ comment "DA850 PLL Initialization Parameters" config SYS_DV_CLKMODE int "PLLCTL Clock Mode" - default 0 if SOC_DA850 + default 0 help Set PLLCTL Clock Mode bit as External Clock or On Chip oscillator config SYS_DA850_PLL0_POSTDIV int "PLLC0 PLL Post-Divider" - default 1 if SOC_DA850 + default 1 help Value written to PLLC0 PLL Post-Divider Control Register config SYS_DA850_PLL0_PLLDIV1 hex "PLLC0 Divider 1" - default 0x8000 if SOC_DA850 + default 0x8000 help Value written to PLLC0 Divider 1 register config SYS_DA850_PLL0_PLLDIV2 hex "PLLC0 Divider 2" - default 0x8001 if SOC_DA850 + default 0x8001 help Value written to PLLC0 Divider 2 register config SYS_DA850_PLL0_PLLDIV3 hex "PLLC0 Divider 3" - default 0x8002 if SOC_DA850 + default 0x8002 help Value written to PLLC0 Divider 3 register config SYS_DA850_PLL0_PLLDIV4 hex "PLLC0 Divider 4" - default 0x8003 if SOC_DA850 + default 0x8003 help Value written to PLLC0 Divider 4 register config SYS_DA850_PLL0_PLLDIV5 hex "PLLC0 Divider 5" - default 0x8002 if SOC_DA850 + default 0x8002 help Value written to PLLC0 Divider 5 register config SYS_DA850_PLL0_PLLDIV6 hex "PLLC0 Divider 6" - default 0x8000 if SOC_DA850 + default 0x8000 help Value written to PLLC0 Divider 6 register config SYS_DA850_PLL0_PLLDIV7 hex "PLLC0 Divider 7" - default 0x8005 if SOC_DA850 + default 0x8005 help Value written to PLLC0 Divider 7 register config SYS_DA850_PLL1_POSTDIV hex "PLLC1 PLL Post-Divider" - default 1 if SOC_DA850 + default 1 help Value written to PLLC1 PLL Post-Divider Control Register config SYS_DA850_PLL1_PLLDIV1 hex "PLLC1 Divider 2" - default 0x8000 if SOC_DA850 + default 0x8000 help Value written to PLLC1 Divider 1 register config SYS_DA850_PLL1_PLLDIV2 hex "PLLC1 Divider 2" - default 0x8001 if SOC_DA850 + default 0x8001 help Value written to PLLC1 Divider 2 register config SYS_DA850_PLL1_PLLDIV3 hex "PLLC1 Divider 3" - default 0x8002 if SOC_DA850 + default 0x8002 help Value written to PLLC1 Divider 3 register