From: Michal Simek <michal.simek@xilinx.com>
Date: Fri, 30 Aug 2013 05:26:08 +0000 (+0200)
Subject: ARM: zynq: Setup correct slcr_lock value
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=2da7a745b6d24eec7be30e7d11ca456d445e30c3;p=u-boot.git

ARM: zynq: Setup correct slcr_lock value

The driver should setup slcr state according
to slcr operations.

Reported-by: Andrey Filippov <andrey@elphel.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

diff --git a/arch/arm/cpu/armv7/zynq/slcr.c b/arch/arm/cpu/armv7/zynq/slcr.c
index 1ff1eac06f..5ba58fad16 100644
--- a/arch/arm/cpu/armv7/zynq/slcr.c
+++ b/arch/arm/cpu/armv7/zynq/slcr.c
@@ -21,14 +21,18 @@ static int slcr_lock = 1; /* 1 means locked, 0 means unlocked */
 
 void zynq_slcr_lock(void)
 {
-	if (!slcr_lock)
+	if (!slcr_lock) {
 		writel(SLCR_LOCK_MAGIC, &slcr_base->slcr_lock);
+		slcr_lock = 1;
+	}
 }
 
 void zynq_slcr_unlock(void)
 {
-	if (slcr_lock)
+	if (slcr_lock) {
 		writel(SLCR_UNLOCK_MAGIC, &slcr_base->slcr_unlock);
+		slcr_lock = 0;
+	}
 }
 
 /* Reset the entire system */