From: wdenk Date: Thu, 31 Oct 2002 22:12:35 +0000 (+0000) Subject: Initial revision X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=2d966958cde6023cde5ac4f58ed7e3531a407966;p=u-boot.git Initial revision --- diff --git a/include/net.h b/include/net.h new file mode 100644 index 0000000000..d4985ca307 --- /dev/null +++ b/include/net.h @@ -0,0 +1,358 @@ +/* + * LiMon Monitor (LiMon) - Network. + * + * Copyright 1994 - 2000 Neil Russell. + * (See License) + * + * + * History + * 9/16/00 bor adapted to TQM823L/STK8xxL board, RARP/TFTP boot added + */ + +#ifndef __NET_H__ +#define __NET_H__ + +#if !defined(CONFIG_NET_MULTI) && defined(CONFIG_8xx) +#include +#if defined(FEC_ENET) || defined(SCC_ENET) +#define CONFIG_NET_MULTI +#endif +#endif +#include /* for nton* / ntoh* stuff */ + + +/* + * The number of receive packet buffers, and the required packet buffer + * alignment in memory. + * + */ + +#define PKTBUFSRX 4 +#define PKTALIGN 32 + +typedef ulong IPaddr_t; + + + +/* + * The current receive packet handler. Called with a pointer to the + * application packet, and a protocol type (PORT_BOOTPC or PORT_TFTP). + * All other packets are dealt with without calling the handler. + */ +typedef void rxhand_f(uchar *, unsigned, unsigned, unsigned); + +/* + * A timeout handler. Called after time interval has expired. + */ +typedef void thand_f(void); + +#ifdef CONFIG_NET_MULTI + +#define NAMESIZE 16 + +enum eth_state_t { + ETH_STATE_INIT, + ETH_STATE_PASSIVE, + ETH_STATE_ACTIVE +}; + +struct eth_device { + char name[NAMESIZE]; + unsigned char enetaddr[6]; + int iobase; + int state; + + int (*init) (struct eth_device*, bd_t*); + int (*send) (struct eth_device*, volatile void* pachet, int length); + int (*recv) (struct eth_device*); + void (*halt) (struct eth_device*); + + struct eth_device *next; + void *priv; +}; + +extern int eth_initialize(bd_t *bis); /* Initialize network subsystem */ +extern int eth_register(struct eth_device* dev);/* Register network device */ +extern void eth_try_another(int first_restart); /* Change the device */ +extern struct eth_device *eth_get_dev(void); /* get the current device MAC */ +extern void eth_set_enetaddr(int num, char* a); /* Set new MAC address */ +#endif + +extern int eth_init(bd_t *bis); /* Initialize the device */ +extern int eth_send(volatile void *packet, int length); /* Send a packet */ +extern int eth_rx(void); /* Check for received packets */ +extern void eth_halt(void); /* stop SCC */ + + +/**********************************************************************/ +/* + * Protocol headers. + */ + +/* + * Ethernet header + */ +typedef struct { + uchar et_dest[6]; /* Destination node */ + uchar et_src[6]; /* Source node */ + ushort et_protlen; /* Protocol or length */ + uchar et_dsap; /* 802 DSAP */ + uchar et_ssap; /* 802 SSAP */ + uchar et_ctl; /* 802 control */ + uchar et_snap1; /* SNAP */ + uchar et_snap2; + uchar et_snap3; + ushort et_prot; /* 802 protocol */ +} Ethernet_t; + +#define ETHER_HDR_SIZE 14 /* Ethernet header size */ +#define E802_HDR_SIZE 22 /* 802 ethernet header size */ +#define PROT_IP 0x0800 /* IP protocol */ +#define PROT_ARP 0x0806 /* IP ARP protocol */ +#define PROT_RARP 0x8035 /* IP ARP protocol */ + +#define IPPROTO_ICMP 1 /* Internet Control Message Protocol */ +#define IPPROTO_UDP 17 /* User Datagram Protocol */ + +/* + * Internet Protocol (IP) header. + */ +typedef struct { + uchar ip_hl_v; /* header length and version */ + uchar ip_tos; /* type of service */ + ushort ip_len; /* total length */ + ushort ip_id; /* identification */ + ushort ip_off; /* fragment offset field */ + uchar ip_ttl; /* time to live */ + uchar ip_p; /* protocol */ + ushort ip_sum; /* checksum */ + IPaddr_t ip_src; /* Source IP address */ + IPaddr_t ip_dst; /* Destination IP address */ + ushort udp_src; /* UDP source port */ + ushort udp_dst; /* UDP destination port */ + ushort udp_len; /* Length of UDP packet */ + ushort udp_xsum; /* Checksum */ +} IP_t; + +#define IP_HDR_SIZE_NO_UDP (sizeof (IP_t) - 8) +#define IP_HDR_SIZE (sizeof (IP_t)) + + +/* + * Address Resolution Protocol (ARP) header. + */ +typedef struct +{ + ushort ar_hrd; /* Format of hardware address */ +# define ARP_ETHER 1 /* Ethernet hardware address */ + ushort ar_pro; /* Format of protocol address */ + uchar ar_hln; /* Length of hardware address */ + uchar ar_pln; /* Length of protocol address */ + ushort ar_op; /* Operation */ +# define ARPOP_REQUEST 1 /* Request to resolve address */ +# define ARPOP_REPLY 2 /* Response to previous request */ + +# define RARPOP_REQUEST 3 /* Request to resolve address */ +# define RARPOP_REPLY 4 /* Response to previous request */ + + /* + * The remaining fields are variable in size, according to + * the sizes above, and are defined as appropriate for + * specific hardware/protocol combinations. + */ + uchar ar_data[0]; +#if 0 + uchar ar_sha[]; /* Sender hardware address */ + uchar ar_spa[]; /* Sender protocol address */ + uchar ar_tha[]; /* Target hardware address */ + uchar ar_tpa[]; /* Target protocol address */ +#endif /* 0 */ +} ARP_t; + +#define ARP_HDR_SIZE (8+20) /* Size assuming ethernet */ + +/* + * ICMP stuff (just enough to handle (host) redirect messages) + */ +#define ICMP_REDIRECT 5 /* Redirect (change route) */ + +/* Codes for REDIRECT. */ +#define ICMP_REDIR_NET 0 /* Redirect Net */ +#define ICMP_REDIR_HOST 1 /* Redirect Host */ + +typedef struct icmphdr { + uchar type; + uchar code; + ushort checksum; + union { + struct { + ushort id; + ushort sequence; + } echo; + ulong gateway; + struct { + ushort __unused; + ushort mtu; + } frag; + } un; +} ICMP_t; + + + +/* + * Maximum packet size; used to allocate packet storage. + * TFTP packets can be 524 bytes + IP header + ethernet header. + * Lets be conservative, and go for 38 * 16. (Must also be + * a multiple of 32 bytes). + */ +/* + * AS.HARNOIS : Better to set PKTSIZE to maximum size because + * traffic type is not always controlled + * maximum packet size = 1518 + * maximum packet size and multiple of 32 bytes = 1536 + */ +#define PKTSIZE 1518 +#define PKTSIZE_ALIGN 1536 +/*#define PKTSIZE 608*/ + +/* + * Maximum receive ring size; that is, the number of packets + * we can buffer before overflow happens. Basically, this just + * needs to be enough to prevent a packet being discarded while + * we are processing the previous one. + */ +#define RINGSZ 4 +#define RINGSZ_LOG2 2 + +/**********************************************************************/ +/* + * Globals. + * + * Note: + * + * All variables of type IPaddr_t are stored in NETWORK byte order + * (big endian). + */ + +/* net.c */ +/** BOOTP EXTENTIONS **/ +extern IPaddr_t NetOurGatewayIP; /* Our gateway IP addresse */ +extern IPaddr_t NetOurSubnetMask; /* Our subnet mask (0 = unknown)*/ +extern IPaddr_t NetOurDNSIP; /* Our Domain Name Server (0 = unknown)*/ +extern char NetOurNISDomain[32]; /* Our NIS domain */ +extern char NetOurHostName[32]; /* Our hostname */ +extern char NetOurRootPath[64]; /* Our root path */ +extern ushort NetBootFileSize; /* Our boot file size in blocks */ +/** END OF BOOTP EXTENTIONS **/ +extern ulong NetBootFileXferSize; /* size of bootfile in bytes */ +extern uchar NetOurEther[6]; /* Our ethernet address */ +extern uchar NetServerEther[6]; /* Boot server enet address */ +extern IPaddr_t NetOurIP; /* Our IP addr (0 = unknown) */ +extern IPaddr_t NetServerIP; /* Server IP addr (0 = unknown) */ +extern volatile uchar * NetTxPacket; /* THE transmit packet */ +extern volatile uchar * NetRxPackets[PKTBUFSRX];/* Receive packets */ +extern volatile uchar * NetRxPkt; /* Current receive packet */ +extern int NetRxPktLen; /* Current rx packet length */ +extern unsigned NetIPID; /* IP ID (counting) */ +extern uchar NetBcastAddr[6]; /* Ethernet boardcast address */ + +extern int NetState; /* Network loop state */ +#define NETLOOP_CONTINUE 1 +#define NETLOOP_RESTART 2 +#define NETLOOP_SUCCESS 3 +#define NETLOOP_FAIL 4 + +#ifdef CONFIG_NET_MULTI +extern int NetRestartWrap; /* Tried all network devices */ +#endif + +typedef enum { BOOTP, RARP, ARP, TFTP, DHCP } proto_t; + +/* from net/net.c */ +extern char BootFile[128]; /* Boot File name */ + +/* Initialize the network adapter */ +extern int NetLoop(proto_t); + +/* Shutdown adapters and cleanup */ +extern void NetStop(void); + +/* Load failed. Start again. */ +extern void NetStartAgain(void); + +/* Set ethernet header */ +extern void NetSetEther(volatile uchar *, uchar *, uint); + +/* Set IP header */ +extern void NetSetIP(volatile uchar *, IPaddr_t, int, int, int); + +/* Checksum */ +extern int NetCksumOk(uchar *, int); /* Return true if cksum OK */ +extern uint NetCksum(uchar *, int); /* Calculate the checksum */ + +/* Set callbacks */ +extern void NetSetHandler(rxhand_f *); /* Set RX packet handler */ +extern void NetSetTimeout(int, thand_f *); /* Set timeout handler */ + +/* Transmit "NetTxPacket" */ +extern void NetSendPacket(volatile uchar *, int); + +/* Processes a received packet */ +extern void NetReceive(volatile uchar *, int); + +/* Print an IP address on the console */ +extern void print_IPaddr (IPaddr_t); + +/* + * The following functions are a bit ugly, but necessary to deal with + * alignment restrictions on ARM. + * + * We're using inline functions, which had the smallest memory + * footprint in our tests. + */ +/* return IP *in network byteorder* */ +static inline IPaddr_t NetReadIP(void *from) +{ + IPaddr_t ip; + memcpy((void*)&ip, from, sizeof(ip)); + return ip; +} + +/* return ulong *in network byteorder* */ +static inline ulong NetReadLong(ulong *from) +{ + ulong l; + memcpy((void*)&l, (void*)from, sizeof(l)); + return l; +} + +/* write IP *in network byteorder* */ +static inline void NetWriteIP(void *to, IPaddr_t ip) +{ + memcpy(to, (void*)&ip, sizeof(ip)); +} + +/* copy IP */ +static inline void NetCopyIP(void *to, void *from) +{ + memcpy(to, from, sizeof(IPaddr_t)); +} + +/* copy ulong */ +static inline void NetCopyLong(ulong *to, ulong *from) +{ + memcpy((void*)to, (void*)from, sizeof(ulong)); +} + +/* Convert an IP address to a string */ +extern void ip_to_string (IPaddr_t x, char *s); + +/* read an IP address from a environment variable */ +extern IPaddr_t getenv_IPaddr (char *); + +/* copy a filename (allow for "..." notation, limit length) */ +extern void copy_filename (uchar *dst, uchar *src, int size); + +/**********************************************************************/ + +#endif /* __NET_H__ */ diff --git a/net/net.c b/net/net.c new file mode 100644 index 0000000000..cc3bec638c --- /dev/null +++ b/net/net.c @@ -0,0 +1,753 @@ +/* + * Copied from Linux Monitor (LiMon) - Networking. + * + * Copyright 1994 - 2000 Neil Russell. + * (See License) + * Copyright 2000 Roland Borde + * Copyright 2000 Paolo Scaffardi + * Copyright 2000-2002 Wolfgang Denk, wd@denx.de + */ + +/* + * General Desription: + * + * The user interface supports commands for BOOTP, RARP, and TFTP. + * Also, we support ARP internally. Depending on available data, + * these interact as follows: + * + * BOOTP: + * + * Prerequisites: - own ethernet address + * We want: - own IP address + * - TFTP server IP address + * - name of bootfile + * Next step: ARP + * + * RARP: + * + * Prerequisites: - own ethernet address + * We want: - own IP address + * - TFTP server IP address + * Next step: ARP + * + * ARP: + * + * Prerequisites: - own ethernet address + * - own IP address + * - TFTP server IP address + * We want: - TFTP server ethernet address + * Next step: TFTP + * + * DHCP: + * + * Prerequisites: - own ethernet address + * We want: - IP, Netmask, ServerIP, Gateway IP + * - bootfilename, lease time + * Next step: - TFTP + * + * TFTP: + * + * Prerequisites: - own ethernet address + * - own IP address + * - TFTP server IP address + * - TFTP server ethernet address + * - name of bootfile (if unknown, we use a default name + * derived from our own IP address) + * We want: - load the boot file + * Next step: none + */ + + +#include +#include +#include +#include +#include "bootp.h" +#include "tftp.h" +#include "rarp.h" +#include "arp.h" + +#if (CONFIG_COMMANDS & CFG_CMD_NET) + +#if 0 +#define ET_DEBUG +#endif + +/** BOOTP EXTENTIONS **/ + +IPaddr_t NetOurSubnetMask=0; /* Our subnet mask (0=unknown) */ +IPaddr_t NetOurGatewayIP=0; /* Our gateways IP address */ +IPaddr_t NetOurDNSIP=0; /* Our DNS IP address */ +char NetOurNISDomain[32]={0,}; /* Our NIS domain */ +char NetOurHostName[32]={0,}; /* Our hostname */ +char NetOurRootPath[64]={0,}; /* Our bootpath */ +ushort NetBootFileSize=0; /* Our bootfile size in blocks */ + +/** END OF BOOTP EXTENTIONS **/ + +ulong NetBootFileXferSize; /* The actual transferred size of the bootfile (in bytes) */ +uchar NetOurEther[6]; /* Our ethernet address */ +uchar NetServerEther[6] = /* Boot server enet address */ + { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }; +IPaddr_t NetOurIP; /* Our IP addr (0 = unknown) */ +IPaddr_t NetServerIP; /* Our IP addr (0 = unknown) */ +volatile uchar *NetRxPkt; /* Current receive packet */ +int NetRxPktLen; /* Current rx packet length */ +unsigned NetIPID; /* IP packet ID */ +uchar NetBcastAddr[6] = /* Ethernet bcast address */ + { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }; +int NetState; /* Network loop state */ +#ifdef CONFIG_NET_MULTI +int NetRestartWrap = 0; /* Tried all network devices */ +static int NetRestarted = 0; /* Network loop restarted */ +static int NetDevExists = 0; /* At least one device configured */ +#endif + +char BootFile[128]; /* Boot File name */ + +volatile uchar PktBuf[(PKTBUFSRX+1) * PKTSIZE_ALIGN + PKTALIGN]; + +volatile uchar *NetRxPackets[PKTBUFSRX]; /* Receive packets */ + +static rxhand_f *packetHandler; /* Current RX packet handler */ +static thand_f *timeHandler; /* Current timeout handler */ +static ulong timeValue; /* Current timeout value */ +volatile uchar *NetTxPacket = 0; /* THE transmit packet */ + +static int net_check_prereq (proto_t protocol); + +/**********************************************************************/ +/* + * Main network processing loop. + */ + +int +NetLoop(proto_t protocol) +{ + DECLARE_GLOBAL_DATA_PTR; + + bd_t *bd = gd->bd; + +#ifdef CONFIG_NET_MULTI + NetRestarted = 0; + NetDevExists = 0; +#endif + + if (!NetTxPacket) { + int i; + + /* + * Setup packet buffers, aligned correctly. + */ + NetTxPacket = &PktBuf[0] + (PKTALIGN - 1); + NetTxPacket -= (ulong)NetTxPacket % PKTALIGN; + for (i = 0; i < PKTBUFSRX; i++) { + NetRxPackets[i] = NetTxPacket + (i+1)*PKTSIZE_ALIGN; + } + } + + eth_halt(); + eth_init(bd); + +restart: +#ifdef CONFIG_NET_MULTI + memcpy (NetOurEther, eth_get_dev()->enetaddr, 6); +#else + memcpy (NetOurEther, bd->bi_enetaddr, 6); +#endif + + NetState = NETLOOP_CONTINUE; + + /* + * Start the ball rolling with the given start function. From + * here on, this code is a state machine driven by received + * packets and timer events. + */ + + switch (protocol) { + case TFTP: + NetCopyIP(&NetOurIP, &bd->bi_ip_addr); + NetServerIP = getenv_IPaddr ("serverip"); + NetOurGatewayIP = getenv_IPaddr ("gatewayip"); + NetOurSubnetMask= getenv_IPaddr ("netmask"); + break; + case BOOTP: + case RARP: + /* + * initialize our IP addr to 0 in order to accept ANY + * IP addr assigned to us by the BOOTP / RARP server + */ + NetOurIP = 0; + NetServerIP = 0; + break; + default: + break; + } + + switch (net_check_prereq (protocol)) { + case 1: + /* network not configured */ + return 0; + +#ifdef CONFIG_NET_MULTI + case 2: + /* network device not configured */ + break; +#endif /* CONFIG_NET_MULTI */ + + case 0: +#ifdef CONFIG_NET_MULTI + NetDevExists = 1; +#endif + switch (protocol) { + case TFTP: + /* always use ARP to get server ethernet address */ + ArpTry = 0; + ArpRequest (); + break; + +#if (CONFIG_COMMANDS & CFG_CMD_DHCP) + case DHCP: + /* Start with a clean slate... */ + NetOurIP = 0; + NetServerIP = 0; + DhcpRequest(); /* Basically same as BOOTP */ + break; +#endif /* CFG_CMD_DHCP */ + + case BOOTP: + BootpTry = 0; + BootpRequest (); + break; + + case RARP: + RarpTry = 0; + RarpRequest (); + break; + default: + break; + } + + NetBootFileXferSize = 0; + break; + } + + + /* + * Main packet reception loop. Loop receiving packets until + * someone sets `NetQuit'. + */ + for (;;) { + WATCHDOG_RESET(); +#ifdef CONFIG_SHOW_ACTIVITY + { + extern void show_activity(int arg); + show_activity(1); + } +#endif + /* + * Check the ethernet for a new packet. The ethernet + * receive routine will process it. + */ + eth_rx(); + + /* + * Abort if ctrl-c was pressed. + */ + if (ctrlc()) { + eth_halt(); + printf("\nAbort\n"); + return 0; + } + + + /* + * Check for a timeout, and run the timeout handler + * if we have one. + */ + if (timeHandler && (get_timer(0) > timeValue)) { + thand_f *x; + + x = timeHandler; + timeHandler = (thand_f *)0; + (*x)(); + } + + + switch (NetState) { + + case NETLOOP_RESTART: +#ifdef CONFIG_NET_MULTI + NetRestarted = 1; +#endif + goto restart; + + case NETLOOP_SUCCESS: + if (NetBootFileXferSize > 0) { + char buf[10]; + printf("Bytes transferred = %ld (%lx hex)\n", + NetBootFileXferSize, + NetBootFileXferSize); + sprintf(buf, "%lx", NetBootFileXferSize); + setenv("filesize", buf); + } + eth_halt(); + return NetBootFileXferSize; + + case NETLOOP_FAIL: + return 0; + } + } +} + +/**********************************************************************/ + +static void +startAgainTimeout(void) +{ + NetState = NETLOOP_RESTART; +} + +static void +startAgainHandler(uchar * pkt, unsigned dest, unsigned src, unsigned len) +{ + /* Totally ignore the packet */ +} + +void +NetStartAgain(void) +{ +#ifndef CONFIG_NET_MULTI + NetSetTimeout(10 * CFG_HZ, startAgainTimeout); + NetSetHandler(startAgainHandler); +#else + DECLARE_GLOBAL_DATA_PTR; + + eth_halt(); + eth_try_another(!NetRestarted); + eth_init(gd->bd); + if (NetRestartWrap) + { + NetRestartWrap = 0; + if (NetDevExists) + { + NetSetTimeout(10 * CFG_HZ, startAgainTimeout); + NetSetHandler(startAgainHandler); + } + else + { + NetState = NETLOOP_FAIL; + } + } + else + { + NetState = NETLOOP_RESTART; + } +#endif +} + +/**********************************************************************/ +/* + * Miscelaneous bits. + */ + +void +NetSetHandler(rxhand_f * f) +{ + packetHandler = f; +} + + +void +NetSetTimeout(int iv, thand_f * f) +{ + if (iv == 0) { + timeHandler = (thand_f *)0; + } else { + timeHandler = f; + timeValue = get_timer(0) + iv; + } +} + + +void +NetSendPacket(volatile uchar * pkt, int len) +{ + (void) eth_send(pkt, len); +} + + + +void +NetReceive(volatile uchar * pkt, int len) +{ + Ethernet_t *et; + IP_t *ip; + ARP_t *arp; + IPaddr_t tmp; + int x; + + + NetRxPkt = pkt; + NetRxPktLen = len; + et = (Ethernet_t *)pkt; + + x = ntohs(et->et_protlen); + + if (x < 1514) { + /* + * Got a 802 packet. Check the other protocol field. + */ + x = ntohs(et->et_prot); + ip = (IP_t *)(pkt + E802_HDR_SIZE); + len -= E802_HDR_SIZE; + } else { + ip = (IP_t *)(pkt + ETHER_HDR_SIZE); + len -= ETHER_HDR_SIZE; + } + +#ifdef ET_DEBUG + printf("Receive from protocol 0x%x\n", x); +#endif + + switch (x) { + + case PROT_ARP: + /* + * We have to deal with two types of ARP packets: + * - REQUEST packets will be answered by sending our + * IP address - if we know it. + * - REPLY packates are expected only after we asked + * for the TFTP server's or the gateway's ethernet + * address; so if we receive such a packet, we set + * the server ethernet address + */ +#ifdef ET_DEBUG + printf("Got ARP\n"); +#endif + arp = (ARP_t *)ip; + if (len < ARP_HDR_SIZE) { + printf("bad length %d < %d\n", len, ARP_HDR_SIZE); + return; + } + if (ntohs(arp->ar_hrd) != ARP_ETHER) { + return; + } + if (ntohs(arp->ar_pro) != PROT_IP) { + return; + } + if (arp->ar_hln != 6) { + return; + } + if (arp->ar_pln != 4) { + return; + } + + if (NetOurIP == 0) { + return; + } + + if (NetReadIP(&arp->ar_data[16]) != NetOurIP) { + return; + } + + switch (ntohs(arp->ar_op)) { + case ARPOP_REQUEST: /* reply with our IP address */ +#ifdef ET_DEBUG + printf("Got ARP REQUEST, return our IP\n"); +#endif + NetSetEther((uchar *)et, et->et_src, PROT_ARP); + arp->ar_op = htons(ARPOP_REPLY); + memcpy (&arp->ar_data[10], &arp->ar_data[0], 6); + NetCopyIP(&arp->ar_data[16], &arp->ar_data[6]); + memcpy (&arp->ar_data[ 0], NetOurEther, 6); + NetCopyIP(&arp->ar_data[ 6], &NetOurIP); + NetSendPacket((uchar *)et,((uchar *)arp-pkt)+ARP_HDR_SIZE); + return; + case ARPOP_REPLY: /* set TFTP server eth addr */ +#ifdef ET_DEBUG + printf("Got ARP REPLY, set server/gtwy eth addr\n"); +#endif + memcpy (NetServerEther, &arp->ar_data[0], 6); + (*packetHandler)(0,0,0,0); /* start TFTP */ + return; + default: +#ifdef ET_DEBUG + printf("Unexpected ARP opcode 0x%x\n", ntohs(arp->ar_op)); +#endif + return; + } + + case PROT_RARP: +#ifdef ET_DEBUG + printf("Got RARP\n"); +#endif + arp = (ARP_t *)ip; + if (len < ARP_HDR_SIZE) { + printf("bad length %d < %d\n", len, ARP_HDR_SIZE); + return; + } + + if ((ntohs(arp->ar_op) != RARPOP_REPLY) || + (ntohs(arp->ar_hrd) != ARP_ETHER) || + (ntohs(arp->ar_pro) != PROT_IP) || + (arp->ar_hln != 6) || (arp->ar_pln != 4)) { + + printf("invalid RARP header\n"); + } else { + NetCopyIP(&NetOurIP, &arp->ar_data[16]); + NetCopyIP(&NetServerIP, &arp->ar_data[ 6]); + memcpy (NetServerEther, &arp->ar_data[ 0], 6); + + (*packetHandler)(0,0,0,0); + } + break; + + case PROT_IP: +#ifdef ET_DEBUG + printf("Got IP\n"); +#endif + if (len < IP_HDR_SIZE) { + debug ("len bad %d < %d\n", len, IP_HDR_SIZE); + return; + } + if (len < ntohs(ip->ip_len)) { + printf("len bad %d < %d\n", len, ntohs(ip->ip_len)); + return; + } + len = ntohs(ip->ip_len); +#ifdef ET_DEBUG + printf("len=%d, v=%02x\n", len, ip->ip_hl_v & 0xff); +#endif + if ((ip->ip_hl_v & 0xf0) != 0x40) { + return; + } + if (ip->ip_off & htons(0x1fff)) { /* Can't deal w/ fragments */ + return; + } + if (!NetCksumOk((uchar *)ip, IP_HDR_SIZE_NO_UDP / 2)) { + printf("checksum bad\n"); + return; + } + tmp = NetReadIP(&ip->ip_dst); + if (NetOurIP && tmp != NetOurIP && tmp != 0xFFFFFFFF) { + return; + } + /* + * watch for ICMP host redirects + * + * There is no real handler code (yet). We just watch + * for ICMP host redirect messages. In case anybody + * sees these messages: please contact me + * (wd@denx.de), or - even better - send me the + * necessary fixes :-) + * + * Note: in all cases where I have seen this so far + * it was a problem with the router configuration, + * for instance when a router was configured in the + * BOOTP reply, but the TFTP server was on the same + * subnet. So this is probably a warning that your + * configuration might be wrong. But I'm not really + * sure if there aren't any other situations. + */ + if (ip->ip_p == IPPROTO_ICMP) { + ICMP_t *icmph = (ICMP_t *)&(ip->udp_src); + + if (icmph->type != ICMP_REDIRECT) + return; + if (icmph->code != ICMP_REDIR_HOST) + return; + puts (" ICMP Host Redirect to "); + print_IPaddr(icmph->un.gateway); + putc(' '); + } else if (ip->ip_p != IPPROTO_UDP) { /* Only UDP packets */ + return; + } + + /* + * IP header OK. Pass the packet to the current handler. + */ + (*packetHandler)((uchar *)ip +IP_HDR_SIZE, + ntohs(ip->udp_dst), + ntohs(ip->udp_src), + ntohs(ip->udp_len) - 8); + + break; + } +} + + +/**********************************************************************/ + +static int net_check_prereq (proto_t protocol) +{ + switch (protocol) { + case ARP: /* nothing to do */ + break; + + case TFTP: + if (NetServerIP == 0) { + puts ("*** ERROR: `serverip' not set\n"); + return (1); + } + + if (NetOurIP == 0) { + puts ("*** ERROR: `ipaddr' not set\n"); + return (1); + } + /* Fall through */ + + case DHCP: + case RARP: + case BOOTP: + if (memcmp(NetOurEther, "\0\0\0\0\0\0", 6) == 0) { +#ifdef CONFIG_NET_MULTI + extern int eth_get_dev_index (void); + int num = eth_get_dev_index(); + + switch (num) { + case -1: + puts ("*** ERROR: No ethernet found.\n"); + return (1); + case 0: + puts ("*** ERROR: `ethaddr' not set\n"); + break; + default: + printf ("*** ERROR: `eth%daddr' not set\n", + num); + break; + } + + NetStartAgain (); + return (2); +#else + puts ("*** ERROR: `ethaddr' not set\n"); + return (1); +#endif + } + /* Fall through */ + } + return (0); /* OK */ +} +/**********************************************************************/ + +int +NetCksumOk(uchar * ptr, int len) +{ + return !((NetCksum(ptr, len) + 1) & 0xfffe); +} + + +unsigned +NetCksum(uchar * ptr, int len) +{ + ulong xsum; + + xsum = 0; + while (len-- > 0) + xsum += *((ushort *)ptr)++; + xsum = (xsum & 0xffff) + (xsum >> 16); + xsum = (xsum & 0xffff) + (xsum >> 16); + return (xsum & 0xffff); +} + + +void +NetSetEther(volatile uchar * xet, uchar * addr, uint prot) +{ + Ethernet_t *et = (Ethernet_t *)xet; + + memcpy (et->et_dest, addr, 6); + memcpy (et->et_src, NetOurEther, 6); + et->et_protlen = htons(prot); +} + + +void +NetSetIP(volatile uchar * xip, IPaddr_t dest, int dport, int sport, int len) +{ + volatile IP_t *ip = (IP_t *)xip; + + /* + * If the data is an odd number of bytes, zero the + * byte after the last byte so that the checksum + * will work. + */ + if (len & 1) + xip[IP_HDR_SIZE + len] = 0; + + /* + * Construct an IP and UDP header. + (need to set no fragment bit - XXX) + */ + ip->ip_hl_v = 0x45; /* IP_HDR_SIZE / 4 (not including UDP) */ + ip->ip_tos = 0; + ip->ip_len = htons(IP_HDR_SIZE + len); + ip->ip_id = htons(NetIPID++); + ip->ip_off = htons(0x4000); /* No fragmentation */ + ip->ip_ttl = 255; + ip->ip_p = 17; /* UDP */ + ip->ip_sum = 0; + NetCopyIP((void*)&ip->ip_src, &NetOurIP); /* already in network byte order */ + NetCopyIP((void*)&ip->ip_dst, &dest); /* - "" - */ + ip->udp_src = htons(sport); + ip->udp_dst = htons(dport); + ip->udp_len = htons(8 + len); + ip->udp_xsum = 0; + ip->ip_sum = ~NetCksum((uchar *)ip, IP_HDR_SIZE_NO_UDP / 2); +} + +void copy_filename (uchar *dst, uchar *src, int size) +{ + if (*src && (*src == '"')) { + ++src; + --size; + } + + while ((--size > 0) && *src && (*src != '"')) { + *dst++ = *src++; + } + *dst = '\0'; +} + +#endif /* CFG_CMD_NET */ + +void ip_to_string (IPaddr_t x, char *s) +{ + x = ntohl(x); + sprintf (s,"%d.%d.%d.%d", + (int)((x >> 24) & 0xff), + (int)((x >> 16) & 0xff), + (int)((x >> 8) & 0xff), + (int)((x >> 0) & 0xff) + ); +} + +void print_IPaddr (IPaddr_t x) +{ + char tmp[16]; + + ip_to_string(x, tmp); + + puts(tmp); +} + +IPaddr_t getenv_IPaddr (char *var) +{ + IPaddr_t addr; + char *s, *e; + int i; + + s = getenv (var); + + for (addr=0, i=0; i<4; ++i) { + ulong val = s ? simple_strtoul(s, &e, 10) : 0; + addr <<= 8; + addr |= (val & 0xFF); + if (s) { + s = (*e) ? e+1 : e; + } + } + + return (htonl(addr)); +}