From: Patrice Chotard Date: Tue, 12 Dec 2017 08:49:37 +0000 (+0100) Subject: board: stm32f429-disco: switch to DM STM32 serial driver X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=2d18d72858adf7171bbae32c2efb0653507435e2;p=u-boot.git board: stm32f429-disco: switch to DM STM32 serial driver Remove serial_stm32.c driver and uart init from board file, use available DM serial_stm32x7.c driver compatible for STM32F4/F7 and H7 SoCs. The serial_stm32x7.c driver will be renamed later with a more generic name as it's shared with all STM32 Socs. Signed-off-by: Patrice Chotard --- diff --git a/arch/arm/include/asm/arch-stm32f4/stm32.h b/arch/arm/include/asm/arch-stm32f4/stm32.h index e9f3aabb6f..bd5c2ecdcb 100644 --- a/arch/arm/include/asm/arch-stm32f4/stm32.h +++ b/arch/arm/include/asm/arch-stm32f4/stm32.h @@ -59,14 +59,6 @@ struct stm32_pwr_regs { #define STM32_PWR_BASE (STM32_APB1PERIPH_BASE + 0x7000) #define STM32_PWR ((struct stm32_pwr_regs *)STM32_PWR_BASE) -/* - * Peripheral base addresses - */ -#define STM32_USART1_BASE (STM32_APB2PERIPH_BASE + 0x1000) -#define STM32_USART2_BASE (STM32_APB1PERIPH_BASE + 0x4400) -#define STM32_USART3_BASE (STM32_APB1PERIPH_BASE + 0x4800) -#define STM32_USART6_BASE (STM32_APB2PERIPH_BASE + 0x1400) - #define FLASH_CNTL_BASE (STM32_AHB1PERIPH_BASE + 0x3C00) static const u32 sect_sz_kb[CONFIG_SYS_MAX_FLASH_SECT] = { diff --git a/board/st/stm32f429-discovery/stm32f429-discovery.c b/board/st/stm32f429-discovery/stm32f429-discovery.c index 7e8df8eaef..7e62bd2aa2 100644 --- a/board/st/stm32f429-discovery/stm32f429-discovery.c +++ b/board/st/stm32f429-discovery/stm32f429-discovery.c @@ -17,7 +17,6 @@ #include #include #include -#include #include #include @@ -168,15 +167,6 @@ int dram_init_banksize(void) return 0; } -static const struct stm32_serial_platdata serial_platdata = { - .base = (struct stm32_usart *)STM32_USART1_BASE, -}; - -U_BOOT_DEVICE(stm32_serials) = { - .name = "serial_stm32", - .platdata = &serial_platdata, -}; - u32 get_board_rev(void) { return 0; diff --git a/configs/stm32f429-discovery_defconfig b/configs/stm32f429-discovery_defconfig index 15ff64645e..ae106ff818 100644 --- a/configs/stm32f429-discovery_defconfig +++ b/configs/stm32f429-discovery_defconfig @@ -27,3 +27,4 @@ CONFIG_RAM=y CONFIG_STM32_SDRAM=y CONFIG_DM_RESET=y CONFIG_STM32_RESET=y +CONFIG_STM32X7_SERIAL=y diff --git a/drivers/serial/serial_stm32.c b/drivers/serial/serial_stm32.c deleted file mode 100644 index c793ba6e90..0000000000 --- a/drivers/serial/serial_stm32.c +++ /dev/null @@ -1,117 +0,0 @@ -/* - * (C) Copyright 2015 - * Kamil Lulko, - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include -#include - -struct stm32_usart { - u32 sr; - u32 dr; - u32 brr; - u32 cr1; - u32 cr2; - u32 cr3; - u32 gtpr; -}; - -#define USART_CR1_RE (1 << 2) -#define USART_CR1_TE (1 << 3) -#define USART_CR1_UE (1 << 13) - -#define USART_SR_FLAG_RXNE (1 << 5) -#define USART_SR_FLAG_TXE (1 << 7) - -#define USART_BRR_F_MASK 0xF -#define USART_BRR_M_SHIFT 4 -#define USART_BRR_M_MASK 0xFFF0 - -DECLARE_GLOBAL_DATA_PTR; - -static int stm32_serial_setbrg(struct udevice *dev, int baudrate) -{ - struct stm32_serial_platdata *plat = dev->platdata; - struct stm32_usart *const usart = plat->base; - u32 clock, int_div, frac_div, tmp; - - if (((u32)usart & STM32_BUS_MASK) == STM32_APB1PERIPH_BASE) - clock = clock_get(CLOCK_APB1); - else if (((u32)usart & STM32_BUS_MASK) == STM32_APB2PERIPH_BASE) - clock = clock_get(CLOCK_APB2); - else - return -EINVAL; - - int_div = (25 * clock) / (4 * baudrate); - tmp = ((int_div / 100) << USART_BRR_M_SHIFT) & USART_BRR_M_MASK; - frac_div = int_div - (100 * (tmp >> USART_BRR_M_SHIFT)); - tmp |= (((frac_div * 16) + 50) / 100) & USART_BRR_F_MASK; - writel(tmp, &usart->brr); - - return 0; -} - -static int stm32_serial_getc(struct udevice *dev) -{ - struct stm32_serial_platdata *plat = dev->platdata; - struct stm32_usart *const usart = plat->base; - - if ((readl(&usart->sr) & USART_SR_FLAG_RXNE) == 0) - return -EAGAIN; - - return readl(&usart->dr); -} - -static int stm32_serial_putc(struct udevice *dev, const char c) -{ - struct stm32_serial_platdata *plat = dev->platdata; - struct stm32_usart *const usart = plat->base; - - if ((readl(&usart->sr) & USART_SR_FLAG_TXE) == 0) - return -EAGAIN; - - writel(c, &usart->dr); - - return 0; -} - -static int stm32_serial_pending(struct udevice *dev, bool input) -{ - struct stm32_serial_platdata *plat = dev->platdata; - struct stm32_usart *const usart = plat->base; - - if (input) - return readl(&usart->sr) & USART_SR_FLAG_RXNE ? 1 : 0; - else - return readl(&usart->sr) & USART_SR_FLAG_TXE ? 0 : 1; -} - -static int stm32_serial_probe(struct udevice *dev) -{ - struct stm32_serial_platdata *plat = dev->platdata; - struct stm32_usart *const usart = plat->base; - setbits_le32(&usart->cr1, USART_CR1_RE | USART_CR1_TE | USART_CR1_UE); - - return 0; -} - -static const struct dm_serial_ops stm32_serial_ops = { - .putc = stm32_serial_putc, - .pending = stm32_serial_pending, - .getc = stm32_serial_getc, - .setbrg = stm32_serial_setbrg, -}; - -U_BOOT_DRIVER(serial_stm32) = { - .name = "serial_stm32", - .id = UCLASS_SERIAL, - .ops = &stm32_serial_ops, - .probe = stm32_serial_probe, - .flags = DM_FLAG_PRE_RELOC, -}; diff --git a/include/configs/stm32f429-discovery.h b/include/configs/stm32f429-discovery.h index 317b9344a1..934acbcf98 100644 --- a/include/configs/stm32f429-discovery.h +++ b/include/configs/stm32f429-discovery.h @@ -43,7 +43,6 @@ #define CONFIG_STM32_GPIO #define CONFIG_STM32_FLASH -#define CONFIG_STM32_SERIAL #define CONFIG_STM32_HSE_HZ 8000000