From: Hans de Goede Date: Thu, 2 Oct 2014 18:43:50 +0000 (+0200) Subject: sunxi: Turn MMC_SUNXI_SLOT_EXTRA into a proper Kconfig option X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=2ccfac01fca3c58ee87db7bbe54c8243e3980d02;p=u-boot.git sunxi: Turn MMC_SUNXI_SLOT_EXTRA into a proper Kconfig option Note we also drop the SPL check for initializing the 2nd mmc slot, the SPL check is not necessary with Kconfig, because only options explicitly marked as also being for the SPL get set during SPL builds. Signed-off-by: Hans de Goede Acked-by: Ian Campbell --- diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig index 63188dd321..552fce8394 100644 --- a/board/sunxi/Kconfig +++ b/board/sunxi/Kconfig @@ -67,4 +67,12 @@ config MMC3_CD_PIN ---help--- See MMC0_CD_PIN help text. +config MMC_SUNXI_SLOT_EXTRA + int "mmc extra slot number" + default -1 + ---help--- + sunxi builds always enable mmc0, some boards also have a second sdcard + slot or emmc on mmc1 - mmc3. Setting this to 1, 2 or 3 will enable + support for this. + endif diff --git a/board/sunxi/board.c b/board/sunxi/board.c index 2179e234e2..cfe22b6138 100644 --- a/board/sunxi/board.c +++ b/board/sunxi/board.c @@ -106,7 +106,7 @@ int board_mmc_init(bd_t *bis) { mmc_pinmux_setup(CONFIG_MMC_SUNXI_SLOT); sunxi_mmc_init(CONFIG_MMC_SUNXI_SLOT); -#if !defined (CONFIG_SPL_BUILD) && defined (CONFIG_MMC_SUNXI_SLOT_EXTRA) +#if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1 mmc_pinmux_setup(CONFIG_MMC_SUNXI_SLOT_EXTRA); sunxi_mmc_init(CONFIG_MMC_SUNXI_SLOT_EXTRA); #endif